Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

AXIOM: a flexible platform for the smart home

  • Giorgi, Roberto
  • Bettin, Nicola
  • Gai, Paolo
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Rizzo, Antonio
The AXIOM hardware/software platform aims at bringing easy programmability on top of a cluster of processors by using a fast interconnect and FPGA as a basis for building a scalable embedded system. The Smart Home is one of the key scenarios in which AXIOM could be useful for the Internet-of-Things (IoT). In Smart Homes, everything is linked to the flow of information that from the “on the field” devices needs to arrive to the cloud servers. The information sensed in the environment will not be transmitted as is to the higher layers, but is somehow interpreted to provide a synthetic light-weight representation of the environment. In such a scenario, it is then clear that there is a need for peripheral nodes as well as intermediate gateways which needs to be able to perform high-performance computational loads. AXIOM provides the possibility of designing a cluster of low-power/low-budget boards, which could be packed inside a “high-performance embedded low-cost product.” The AXIOM boards are heterogeneous, thus allowing for even greater diversity which is needed in those kind of IoT scenarios. The cluster itself can then be integrated inside the IoT architectures as “computational-power node,” which could be the center of a distributed intelligence near the edges of the IoT network., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Implementation of the K-Means Algorithm on Heterogeneous Devices: A Use Case Based on an Industrial Dataset

  • Xu, Ying hao
  • Vidal, Miquel|||0000-0002-1973-8289
  • Arejita, Beñat
  • Diaz, Javier
  • Alvarez, Carlos
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Mantovani, Filippo|||0000-0003-3559-4825
This paper presents and analyzes a heterogeneous implementation of an industrial use case based on K-means that targets symmetric multiprocessing (SMP), GPUs and FPGAs. We present how the application can be optimized from an algorithmic point of view and how this optimization performs on two heterogeneous platforms. The presented implementation relies on the OmpSs programming model, which introduces a simplified pragma-based syntax for the communication between the main processor and the accelerators. Performance improvement can be achieved by the programmer explicitly specifying the data memory accesses or copies. As expected, the newer SMP+GPU system studied is more powerful than the older SMP+FPGA system. However the latter is enough to fulfill the requirements of our use case and we show that uses less energy when considering only the active power of the execution., This work is partially supported by the European Union H2020 project AXIOM (grant agreement n. 645496), HiPEAC (grant agreement n. 687698), and Mont-Blanc (grant agreements n. 288777, 610402 and 671697), the Spanish Government Programa Severo Ochoa (SEV-2015-0493), the Spanish Ministry of Science and Technology (TIN2015- 65316-P) and the Departament d’Innovació, Universitats i Empresa de la Generalitat de Catalunya, under project MPEXPAR: Models de Programaci´o i Entorns d’Execució Paral·lels (2014-SGR-1051)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

The secrets of the accelerators unveiled: tracing heterogeneous executions through OMPT

  • Llort, German
  • Filgueras Izquierdo, Antonio|||0000-0001-6071-3254
  • Jiménez-González, Daniel
  • Servat, Harald
  • Teruel, Xavier
  • Mercadal, Estanislao
  • Álvarez, Carlos
  • Giménez, Judit
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Labarta Mancho, Jesús José|||0000-0002-7489-4727
Heterogeneous systems are an important trend in the future of supercomputers, yet they can be hard to program and developers still lack powerful tools to gain understanding about how well their accelerated codes perform and how to improve them. Having different types of hardware accelerators available, each with their own specific low-level APIs to program them, there is not yet a clear consensus on a standard way to retrieve information about the accelerator’s performance. To improve this scenario, OMPT is a novel performance monitoring interface that is being considered for integration into the OpenMP standard. OMPT allows analysis tools to monitor the execution of parallel OpenMP applications by providing detailed information about the activity of the runtime through a standard API. For accelerated devices, OMPT also facilitates the exchange of performance information between the runtime and the analysis tool. We implement part of the OMPT specification that refers to the use of accelerators both in the Nanos++ parallel runtime system and the Extrae tracing framework, obtaining detailed performance information about the execution of the tasks issued to the accelerated devices to later conduct insightful analysis. Our work extends previous efforts in the field to expose detailed information from the OpenMP and OmpSs runtimes, regarding the activity and performance of task-based parallel applications. In this paper, we focus on the evaluation of FPGA devices studying the performance of two common kernels in scientific algorithms: matrix multiplication and Cholesky decomposition. Furthermore, this development is seamlessly applicable for the analysis of GPGPU accelerators and Intel®Xeon PhiTM co-processors operating under the OmpSs programming model., This work was partially supported by the European Union H2020 program through the AXIOM project (grant ICT-01-2014 GA 645496) and the Mont-Blanc 2 project, by the Ministerio de Economía y Competitividad, under contracts Computación de Altas Prestaciones VII (TIN2015-65316-P); Departament d'Innovació, Universitats i Empresa de la Generalitat de Catalunya, under projects MPEXPAR: Models de Programació i Entorns d'Execució Paral·lels (2014-SGR-1051) and 2009-SGR-980; the BSC-CNS Severo Ochoa program (SEV-2011-00067); the Intel-BSC Exascale Laboratory project; and the OMPT Working Group., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Exploiting parallelism on GPUs and FPGAs with OmpSs

  • Bosch Pons, Jaume|||0000-0002-4040-3416
  • Filgueras Izquierdo, Antonio|||0000-0001-6071-3254
  • Vidal, Miquel|||0000-0002-1973-8289
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Álvarez Martínez, Carlos|||0000-0003-0536-5183
  • Martorell, Xavier
This paper presents the OmpSs approach to deal with heterogeneous programming on GPU and FPGA accelerators. The OmpSs programming model is based on the Mercurium compiler and the Nanos++ runtime. Applications are annotated with compiler directives specifying task-based parallelism. The Mercurium compiler transforms the code to exploit the parallelism in the SMP host cores, and also to spawn work on CUDA/OpenCL devices, and FPGA accelerators. For the CUDA/OpenCL devices, the programmer needs only to insert the annotations and provide the kernel function to be compiled by the native CUDA/OpenCL compiler. In the case of the FPGAs, OmpSs uses the High-Level Synthesis tools from FPGA vendors to generate the IP configurations for the FPGA. In this paper we present the performance obtained on the matrix multiply benchmark in the Xilinx Zynq Ultrascale+, as a result of using OmpSs on this benchmark., This work is partially supported by the European Union H2020 program through the AXIOM project (grant ICT-01-2014 GA 645496) and HiPEAC (GA 687698), by the Spanish Government through Programa Severo Ochoa (SEV-2011-0067), by the Spanish Ministerio de Economia y Competitividad under contract Computacion de Altas Prestaciones VII (TIN2015-65316-P), and the Departament d’Innovacio, Universitats i Empresa de la Generalitat de Catalunya, under project MPEXPAR: Models de Programacio i Entorns d’Execucio Paral·lels (2014-SGR-1051)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The AXIOM project: IoT on heterogeneous embedded platforms

  • Filgueras Izquierdo, Antonio|||0000-0001-6071-3254
  • Vidal, Miquel|||0000-0002-1973-8289
  • Mateu, Marc
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Álvarez Martínez, Carlos|||0000-0003-0536-5183
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Theodoropoulos, Dimitris
  • Pnevmatikatos, Dionisis
  • Gai, Paolo
  • Garzarella, Stefano
  • Oro de Herta, David
  • Hernando Pericás, Francisco Javier|||0000-0002-1730-8154
  • Bettin, Nicola
  • Pomella, Alberto
  • Giorgi, Roberto
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The AXIOM project aims at providing an environment for Cyber-Physical Systems. Smart Video Surveillance targets public environments, involving real-time face detection in crowds. Smart Home Living targets home environments and access control. These applications are used as experimental usecases for the AXIOM platform, currently based on the Xilinx Zynq-7000 SoCs. We have integrated the Xilinx Vivado HLS tool for the FPGA support within the OmpSs programming model, to enable OpenMP-like programming in the FPGA. This paper presents the programming environment, and the evaluation of the most computationally expensive parts of the target applications., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The AXIOM software layers

  • Álvarez, Carlos
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Bosch Pons, Jaume|||0000-0002-4040-3416
  • Bueno Hedo, Javier
  • Cherkashin, Artem
  • Filgueras Izquierdo, Antonio|||0000-0001-6071-3254
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Navarro, Nacho|||0000-0003-3637-4568
  • Vidal, Miquel|||0000-0002-1973-8289
  • Theodoropoulos, Dimitris
  • Pnevmatikatos, Dionisis
  • Catani, Davide
  • Oro Garcia, David
  • Fernandez Prades, Carles
  • Segura, Carlos
  • Rodriguez Saeta, Javier
  • Hernando Pericás, Francisco Javier|||0000-0002-1730-8154
  • Scordino, Claudio
  • Gai, Paolo
  • Passera, Pierluigi
  • Pomella, Alberto
  • Bettin, Nicola
  • Rizzo, Antonio
  • Giorgi, Roberto
AXIOM project aims at developing a heterogeneous computing board (SMP-FPGA).The Software Layers developed at the AXIOM project are explained.OmpSs provides an easy way to execute heterogeneous codes in multiple cores. People and objects will soon share the same digital network for information exchange in a world named as the age of the cyber-physical systems. The general expectation is that people and systems will interact in real-time. This poses pressure onto systems design to support increasing demands on computational power, while keeping a low power envelop. Additionally, modular scaling and easy programmability are also important to ensure these systems to become widespread. The whole set of expectations impose scientific and technological challenges that need to be properly addressed.The AXIOM project (Agile, eXtensible, fast I/O Module) will research new hardware/software architectures for cyber-physical systems to meet such expectations. The technical approach aims at solving fundamental problems to enable easy programmability of heterogeneous multi-core multi-board systems. AXIOM proposes the use of the task-based OmpSs programming model, leveraging low-level communication interfaces provided by the hardware. Modular scalability will be possible thanks to a fast interconnect embedded into each module. To this aim, an innovative ARM and FPGA-based board will be designed, with enhanced capabilities for interfacing with the physical world. Its effectiveness will be demonstrated with key scenarios such as Smart Video-Surveillance and Smart Living/Home (domotics)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modeling multi-board communication in the AXIOM cyber-physical system

  • Giorgi, Roberto
  • Mazumdar, Somnath
  • Viola, Stefano
  • Gai, Paolo
  • Garzarella, Stefano
  • Morelli, Bruno
  • Pnevmatikatos, Dionisis
  • Theodoropoulos, Dimitris
  • Alvarez, Carlos
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Bueno, Javier
  • Filgueras Izquierdo, Antonio|||0000-0001-6071-3254
  • Jiménez-González, Daniel
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
The main goal of the AXIOM project is to design a small board that could be used as a LEGOTM-style module to build systems with more performance while keeping the programming task simple by using a familiar shared-memory programming model. The interconnection plays a crucial role both for the need of providing fast and reliable communication (including lossless control flow as, e.g., Infiniband, but with a simplified scope and cost). In this paper, we outline some of our initial choices and explore the performance of RDMA based mechanisms and interfaces, including the remote memory management behind the programming model. Our initial results show a potential for scaling the system as we use DF-Threads, good bandwidth for RDMA transfers, promising to scale once we use the OmpSs, programming model., This work is partially supported by the European Union H2020 program through the AXIOM project (grant ICT-01-2014 GA 645496) and HiPEAC (GA 687698), by the Spanish Government through Programa Severo Ochoa (SEV-2011-0067), by the Spanish Ministry of Science and Technology through TIN2012-34557 project, and by the Generalitat de Catalunya (contract 2009-SGR-980)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

AXIOM: a hardware-software platform for cyber physical systems

  • Mazumdar, Somnath
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Bettin, Nicola
  • Bueno Hedo, Javier
  • Ermini, Sara
  • Filgueras Izquierdo, Antonio|||0000-0001-6071-3254
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Álvarez Martínez, Carlos|||0000-0003-0536-5183
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Montefoschi, Francesco
  • Oro Garcia, David
  • Pnevmatikatos, Dionisis
  • Rizzo, Antonio
  • Theodoropoulos, Dimitris
  • Giorgi, Roberto
Cyber-Physical Systems (CPSs) are widely necessary for many applications that require interactions with the humans and the physical environment. A CPS integrates a set of hardware-software components to distribute, execute and manage its operations. The AXIOM project (Agile, eXtensible, fast I/O Module) aims at developing a hardware-software platform for CPS such that i) it can use an easy parallel programming model and ii) it can easily scale-up the performance by adding multiple boards (e.g., 1 to 10 boards can run in parallel). AXIOM supports taskbased programming model based on OmpSs and leverage a high-speed, inexpensive communication interface called AXIOM-Link. Another key aspect is that the board provides programmable logic (FPGA) to accelerate portions of an application. We are using smart video surveillance, and smart home living applications to drive our design., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

The AXIOM software layers

  • Alvarez, Carlos
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Bueno Hedo, Javier
  • Filgueras Izquierdo, Antonio|||0000-0001-6071-3254
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Navarro, Nacho|||0000-0003-3637-4568
  • Theodoropoulos, Dimitris
  • Pnevmatikatos, Dionisis
  • Scordino, Claudio
  • Gai, Paolo
  • Catani, Davide
  • Segura, Carlos
People and objects will soon share the same digital network for information exchange in a world named as the age of the cyber-physical systems. The general expectation is that people and systems will interact in real-time. This poses pressure onto systems design to support increasing demands on computational power, while keeping a low power envelop. Additionally, modular scaling and easy programmability are also important to ensure these systems to become widespread. The whole set of expectations impose scientific and technological challenges that need to be properly addressed. The AXIOM project (Agile, eXtensible, fast I/O Module) will research new hardware/software architectures for cyber-physical systems to meet such expectations. The technical approach aims at solving fundamental problems to enable easy programmability of heterogeneous multi-core multi-board systems. AXIOM proposes the use of the task-based OmpSs programming model, leveraging low-level communication interfaces provided by the hardware. Modular scalability will be possible thanks to a fast interconnect embedded into each module. To this aim, an innovative ARM and FPGA-based board will be designed, with enhanced capabilities for interfacing with the physical world. Its effectiveness will be demonstrated with key scenarios such as Smart Video-Surveillance and Smart Living/Home (domotics)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The AXIOM platform for next-generation cyber physical systems

  • Theodoropoulos, Dimitris
  • Mazumdar, Somnath
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Bettin, Nicola
  • Bueno Hedo, Javier
  • Ermini, Sara
  • Filgueras Izquierdo, Antonio|||0000-0001-6071-3254
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Álvarez Martínez, Carlos|||0000-0003-0536-5183
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Montefoschi, Francesco
  • Oro Garcia, David
  • Pnevmatikatos, Dionisis
  • Rizzo, Antonio
  • Gai, Paolo
  • Garzarella, Stefano
  • Morelli, Bruno
  • Pomella, Alberto
  • Giorgi, Roberto
Cyber-Physical Systems (CPSs) are widely used in many applications that require interactions between humans and their physical environment. These systems usually integrate a set of hardware-software components for optimal application execution in terms of performance and energy consumption. The AXIOM project (Agile, eXtensible, fast I/O Module), presented in this paper, proposes a hardware-software platform for CPS coupled with an easy parallel programming model and sufficient connectivity so that the performance can scale-up by adding multiple boards. AXIOM supports a task-based programming model based on OmpSs and leverages a high-speed, inexpensive communication interface called AXIOM-Link. The board also tightly couples the CPU with reconfigurable resources to accelerate portions of the applications. As case studies, AXIOM uses smart video surveillance, and smart home living applications, This work is partially supported by the European Union H2020 program through the AXIOM project (grant ICT-01-2014 GA 645496) and HiPEAC (GA 687698), by the Spanish Government through Programa Severo Ochoa (SEV-2015-0493), by the Spanish Ministry of Science and Technology through TIN2015-65316-P project, and by the Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272). We also thank the Xilinx University Program for its hardware and software donations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

The AXIOM project (Agile, eXtensible, fast I/O Module)

  • Theodoropoulos, Dimitris
  • Pnevmatikatos, Dionisis
  • Alvarez, Carlos
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Bueno, Javier
  • Filgueras Izquierdo, Antonio|||0000-0001-6071-3254
  • Jiménez-González, Daniel
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Navarro, Nacho|||0000-0003-3637-4568
  • Segura, Carlos
  • Fernandez, Carles
  • Oro, David
  • Rodriguez Saeta, Javier
  • Gai, Paolo
  • Rizzo, Antonio
  • Giorgi, Roberto
The AXIOM project (Agile, eXtensible, fast I/O Module) aims at researching new software/hardware architectures for the future Cyber-Physical Systems (CPSs). These systems are expected to react in real-time, provide enough computational power for the assigned tasks, consume the least possible energy for such task (energy efficiency), scale up through modularity, allow for an easy programmability across performance scaling, and exploit at best existing standards at minimal costs., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The AXIOM platform for next-generation cyber physical systems

  • Theodoropoulos, Dimitris
  • Mazumdar, Somnath
  • Ayguadé Parra, Eduard
  • Bettin, Nicola
  • Bueno Hedo, Javier
  • Ermini, Sara
  • Filgueras Izquierdo, Antonio
  • Jiménez González, Daniel
  • Álvarez Martínez, Carlos
  • Martorell Bofill, Xavier
  • Montefoschi, Francesco
  • Oro Garcia, David
  • Pnevmatikatos, Dionisis
  • Rizzo, Antonio
  • Gai, Paolo
  • Garzarella, Stefano
  • Morelli, Bruno
  • Pomella, Alberto
  • Giorgi, Roberto
Cyber-Physical Systems (CPSs) are widely used in many applications that require interactions between humans and their physical environment. These systems usually integrate a set of hardware-software components for optimal application execution in terms of performance and energy consumption. The AXIOM project (Agile, eXtensible, fast I/O Module), presented in this paper, proposes a hardware-software platform for CPS coupled with an easy parallel programming model and sufficient connectivity so that the performance can scale-up by adding multiple boards. AXIOM supports a task-based programming model based on OmpSs and leverages a high-speed, inexpensive communication interface called AXIOM-Link. The board also tightly couples the CPU with reconfigurable resources to accelerate portions of the applications. As case studies, AXIOM uses smart video surveillance, and smart home living applications, This work is partially supported by the European Union H2020 program through the AXIOM project (grant ICT-01-2014 GA 645496) and HiPEAC (GA 687698), by the Spanish Government through Programa Severo Ochoa (SEV-2015-0493), by the Spanish Ministry of Science and Technology through TIN2015-65316-P project, and by the Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272). We also thank the Xilinx University Program for its hardware and software donations., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The AXIOM project: IoT on heterogeneous embedded platforms

  • Filgueras Izquierdo, Antonio
  • Vidal, Miquel
  • Mateu, Marc
  • Jiménez González, Daniel
  • Álvarez Martínez, Carlos
  • Martorell Bofill, Xavier
  • Ayguadé Parra, Eduard
  • Theodoropoulos, Dimitris
  • Pnevmatikatos, Dionisis
  • Gai, Paolo
  • Garzarella, Stefano
  • Oro de Herta, David
  • Hernando Pericás, Francisco Javier
  • Bettin, Nicola
  • Pomella, Alberto
  • Giorgi, Roberto
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The AXIOM project aims at providing an environment for Cyber-Physical Systems. Smart Video Surveillance targets public environments, involving real-time face detection in crowds. Smart Home Living targets home environments and access control. These applications are used as experimental usecases for the AXIOM platform, currently based on the Xilinx Zynq-7000 SoCs. We have integrated the Xilinx Vivado HLS tool for the FPGA support within the OmpSs programming model, to enable OpenMP-like programming in the FPGA. This paper presents the programming environment, and the evaluation of the most computationally expensive parts of the target applications., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The secrets of the accelerators unveiled: tracing heterogeneous executions through OMPT

  • Llort, German
  • Filgueras Izquierdo, Antonio
  • Jiménez-González, Daniel
  • Servat, Harald
  • Teruel, Xavier
  • Mercadal, Estanislao
  • Álvarez, Carlos
  • Giménez, Judit
  • Martorell Bofill, Xavier
  • Ayguadé Parra, Eduard
  • Labarta Mancho, Jesús José
Heterogeneous systems are an important trend in the future of supercomputers, yet they can be hard to program and developers still lack powerful tools to gain understanding about how well their accelerated codes perform and how to improve them. Having different types of hardware accelerators available, each with their own specific low-level APIs to program them, there is not yet a clear consensus on a standard way to retrieve information about the accelerator’s performance. To improve this scenario, OMPT is a novel performance monitoring interface that is being considered for integration into the OpenMP standard. OMPT allows analysis tools to monitor the execution of parallel OpenMP applications by providing detailed information about the activity of the runtime through a standard API. For accelerated devices, OMPT also facilitates the exchange of performance information between the runtime and the analysis tool. We implement part of the OMPT specification that refers to the use of accelerators both in the Nanos++ parallel runtime system and the Extrae tracing framework, obtaining detailed performance information about the execution of the tasks issued to the accelerated devices to later conduct insightful analysis. Our work extends previous efforts in the field to expose detailed information from the OpenMP and OmpSs runtimes, regarding the activity and performance of task-based parallel applications. In this paper, we focus on the evaluation of FPGA devices studying the performance of two common kernels in scientific algorithms: matrix multiplication and Cholesky decomposition. Furthermore, this development is seamlessly applicable for the analysis of GPGPU accelerators and Intel®Xeon PhiTM co-processors operating under the OmpSs programming model., This work was partially supported by the European Union H2020 program through the AXIOM project (grant ICT-01-2014 GA 645496) and the Mont-Blanc 2 project, by the Ministerio de Economía y Competitividad, under contracts Computación de Altas Prestaciones VII (TIN2015-65316-P); Departament d'Innovació, Universitats i Empresa de la Generalitat de Catalunya, under projects MPEXPAR: Models de Programació i Entorns d'Execució Paral·lels (2014-SGR-1051) and 2009-SGR-980; the BSC-CNS Severo Ochoa program (SEV-2011-00067); the Intel-BSC Exascale Laboratory project; and the OMPT Working Group., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The AXIOM project (Agile, eXtensible, fast I/O Module)

  • Theodoropoulos, Dimitris
  • Pnevmatikatos, Dionisis
  • Alvarez, Carlos
  • Ayguadé Parra, Eduard
  • Bueno, Javier
  • Filgueras Izquierdo, Antonio
  • Jiménez-González, Daniel
  • Martorell Bofill, Xavier
  • Navarro, Nacho
  • Segura, Carlos
  • Fernandez, Carles
  • Oro, David
  • Rodriguez Saeta, Javier
  • Gai, Paolo
  • Rizzo, Antonio
  • Giorgi, Roberto
The AXIOM project (Agile, eXtensible, fast I/O Module) aims at researching new software/hardware architectures for the future Cyber-Physical Systems (CPSs). These systems are expected to react in real-time, provide enough computational power for the assigned tasks, consume the least possible energy for such task (energy efficiency), scale up through modularity, allow for an easy programmability across performance scaling, and exploit at best existing standards at minimal costs., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The AXIOM software layers

  • Alvarez, Carlos
  • Ayguadé Parra, Eduard
  • Bueno Hedo, Javier
  • Filgueras Izquierdo, Antonio
  • Jiménez González, Daniel
  • Martorell Bofill, Xavier
  • Navarro, Nacho
  • Theodoropoulos, Dimitris
  • Pnevmatikatos, Dionisis
  • Scordino, Claudio
  • Gai, Paolo
  • Catani, Davide
  • Segura, Carlos
People and objects will soon share the same digital network for information exchange in a world named as the age of the cyber-physical systems. The general expectation is that people and systems will interact in real-time. This poses pressure onto systems design to support increasing demands on computational power, while keeping a low power envelop. Additionally, modular scaling and easy programmability are also important to ensure these systems to become widespread. The whole set of expectations impose scientific and technological challenges that need to be properly addressed. The AXIOM project (Agile, eXtensible, fast I/O Module) will research new hardware/software architectures for cyber-physical systems to meet such expectations. The technical approach aims at solving fundamental problems to enable easy programmability of heterogeneous multi-core multi-board systems. AXIOM proposes the use of the task-based OmpSs programming model, leveraging low-level communication interfaces provided by the hardware. Modular scalability will be possible thanks to a fast interconnect embedded into each module. To this aim, an innovative ARM and FPGA-based board will be designed, with enhanced capabilities for interfacing with the physical world. Its effectiveness will be demonstrated with key scenarios such as Smart Video-Surveillance and Smart Living/Home (domotics)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

AXIOM: a hardware-software platform for cyber physical systems

  • Mazumdar, Somnath
  • Ayguadé Parra, Eduard
  • Bettin, Nicola
  • Bueno Hedo, Javier
  • Ermini, Sara
  • Filgueras Izquierdo, Antonio
  • Jiménez González, Daniel
  • Álvarez Martínez, Carlos
  • Martorell Bofill, Xavier
  • Montefoschi, Francesco
  • Oro Garcia, David
  • Pnevmatikatos, Dionisis
  • Rizzo, Antonio
  • Theodoropoulos, Dimitris
  • Giorgi, Roberto
Cyber-Physical Systems (CPSs) are widely necessary for many applications that require interactions with the humans and the physical environment. A CPS integrates a set of hardware-software components to distribute, execute and manage its operations. The AXIOM project (Agile, eXtensible, fast I/O Module) aims at developing a hardware-software platform for CPS such that i) it can use an easy parallel programming model and ii) it can easily scale-up the performance by adding multiple boards (e.g., 1 to 10 boards can run in parallel). AXIOM supports taskbased programming model based on OmpSs and leverage a high-speed, inexpensive communication interface called AXIOM-Link. Another key aspect is that the board provides programmable logic (FPGA) to accelerate portions of an application. We are using smart video surveillance, and smart home living applications to drive our design., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

AXIOM: a flexible platform for the smart home

  • Giorgi, Roberto
  • Bettin, Nicola
  • Gai, Paolo
  • Martorell Bofill, Xavier
  • Rizzo, Antonio
The AXIOM hardware/software platform aims at bringing easy programmability on top of a cluster of processors by using a fast interconnect and FPGA as a basis for building a scalable embedded system. The Smart Home is one of the key scenarios in which AXIOM could be useful for the Internet-of-Things (IoT). In Smart Homes, everything is linked to the flow of information that from the “on the field” devices needs to arrive to the cloud servers. The information sensed in the environment will not be transmitted as is to the higher layers, but is somehow interpreted to provide a synthetic light-weight representation of the environment. In such a scenario, it is then clear that there is a need for peripheral nodes as well as intermediate gateways which needs to be able to perform high-performance computational loads. AXIOM provides the possibility of designing a cluster of low-power/low-budget boards, which could be packed inside a “high-performance embedded low-cost product.” The AXIOM boards are heterogeneous, thus allowing for even greater diversity which is needed in those kind of IoT scenarios. The cluster itself can then be integrated inside the IoT architectures as “computational-power node,” which could be the center of a distributed intelligence near the edges of the IoT network., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Implementation of the K-Means Algorithm on Heterogeneous Devices: A Use Case Based on an Industrial Dataset

  • Xu, Ying hao
  • Vidal, Miquel
  • Arejita, Beñat
  • Diaz, Javier
  • Alvarez, Carlos
  • Jiménez González, Daniel
  • Martorell Bofill, Xavier
  • Mantovani, Filippo
This paper presents and analyzes a heterogeneous implementation of an industrial use case based on K-means that targets symmetric multiprocessing (SMP), GPUs and FPGAs. We present how the application can be optimized from an algorithmic point of view and how this optimization performs on two heterogeneous platforms. The presented implementation relies on the OmpSs programming model, which introduces a simplified pragma-based syntax for the communication between the main processor and the accelerators. Performance improvement can be achieved by the programmer explicitly specifying the data memory accesses or copies. As expected, the newer SMP+GPU system studied is more powerful than the older SMP+FPGA system. However the latter is enough to fulfill the requirements of our use case and we show that uses less energy when considering only the active power of the execution., This work is partially supported by the European Union H2020 project AXIOM (grant agreement n. 645496), HiPEAC (grant agreement n. 687698), and Mont-Blanc (grant agreements n. 288777, 610402 and 671697), the Spanish Government Programa Severo Ochoa (SEV-2015-0493), the Spanish Ministry of Science and Technology (TIN2015- 65316-P) and the Departament d’Innovació, Universitats i Empresa de la Generalitat de Catalunya, under project MPEXPAR: Models de Programaci´o i Entorns d’Execució Paral·lels (2014-SGR-1051)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The AXIOM software layers

  • Álvarez, Carlos
  • Ayguadé Parra, Eduard
  • Bosch Pons, Jaume
  • Bueno Hedo, Javier
  • Cherkashin, Artem
  • Filgueras Izquierdo, Antonio
  • Jiménez González, Daniel
  • Martorell Bofill, Xavier
  • Navarro, Nacho
  • Vidal, Miquel
  • Theodoropoulos, Dimitris
  • Pnevmatikatos, Dionisis
  • Catani, Davide
  • Oro Garcia, David
  • Fernandez Prades, Carles
  • Segura, Carlos
  • Rodriguez Saeta, Javier
  • Hernando Pericás, Francisco Javier
  • Scordino, Claudio
  • Gai, Paolo
  • Passera, Pierluigi
  • Pomella, Alberto
  • Bettin, Nicola
  • Rizzo, Antonio
  • Giorgi, Roberto
AXIOM project aims at developing a heterogeneous computing board (SMP-FPGA).The Software Layers developed at the AXIOM project are explained.OmpSs provides an easy way to execute heterogeneous codes in multiple cores. People and objects will soon share the same digital network for information exchange in a world named as the age of the cyber-physical systems. The general expectation is that people and systems will interact in real-time. This poses pressure onto systems design to support increasing demands on computational power, while keeping a low power envelop. Additionally, modular scaling and easy programmability are also important to ensure these systems to become widespread. The whole set of expectations impose scientific and technological challenges that need to be properly addressed.The AXIOM project (Agile, eXtensible, fast I/O Module) will research new hardware/software architectures for cyber-physical systems to meet such expectations. The technical approach aims at solving fundamental problems to enable easy programmability of heterogeneous multi-core multi-board systems. AXIOM proposes the use of the task-based OmpSs programming model, leveraging low-level communication interfaces provided by the hardware. Modular scalability will be possible thanks to a fast interconnect embedded into each module. To this aim, an innovative ARM and FPGA-based board will be designed, with enhanced capabilities for interfacing with the physical world. Its effectiveness will be demonstrated with key scenarios such as Smart Video-Surveillance and Smart Living/Home (domotics)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modeling multi-board communication in the AXIOM cyber-physical system

  • Giorgi, Roberto
  • Mazumdar, Somnath
  • Viola, Stefano
  • Gai, Paolo
  • Garzarella, Stefano
  • Morelli, Bruno
  • Pnevmatikatos, Dionisis
  • Theodoropoulos, Dimitris
  • Alvarez, Carlos
  • Ayguadé Parra, Eduard
  • Bueno, Javier
  • Filgueras Izquierdo, Antonio
  • Jiménez-González, Daniel
  • Martorell Bofill, Xavier
The main goal of the AXIOM project is to design a small board that could be used as a LEGOTM-style module to build systems with more performance while keeping the programming task simple by using a familiar shared-memory programming model. The interconnection plays a crucial role both for the need of providing fast and reliable communication (including lossless control flow as, e.g., Infiniband, but with a simplified scope and cost). In this paper, we outline some of our initial choices and explore the performance of RDMA based mechanisms and interfaces, including the remote memory management behind the programming model. Our initial results show a potential for scaling the system as we use DF-Threads, good bandwidth for RDMA transfers, promising to scale once we use the OmpSs, programming model., This work is partially supported by the European Union H2020 program through the AXIOM project (grant ICT-01-2014 GA 645496) and HiPEAC (GA 687698), by the Spanish Government through Programa Severo Ochoa (SEV-2011-0067), by the Spanish Ministry of Science and Technology through TIN2012-34557 project, and by the Generalitat de Catalunya (contract 2009-SGR-980)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Exploiting parallelism on GPUs and FPGAs with OmpSs

  • Bosch Pons, Jaume
  • Filgueras Izquierdo, Antonio
  • Vidal, Miquel
  • Jiménez González, Daniel
  • Álvarez Martínez, Carlos
  • Martorell, Xavier
This paper presents the OmpSs approach to deal with heterogeneous programming on GPU and FPGA accelerators. The OmpSs programming model is based on the Mercurium compiler and the Nanos++ runtime. Applications are annotated with compiler directives specifying task-based parallelism. The Mercurium compiler transforms the code to exploit the parallelism in the SMP host cores, and also to spawn work on CUDA/OpenCL devices, and FPGA accelerators. For the CUDA/OpenCL devices, the programmer needs only to insert the annotations and provide the kernel function to be compiled by the native CUDA/OpenCL compiler. In the case of the FPGAs, OmpSs uses the High-Level Synthesis tools from FPGA vendors to generate the IP configurations for the FPGA. In this paper we present the performance obtained on the matrix multiply benchmark in the Xilinx Zynq Ultrascale+, as a result of using OmpSs on this benchmark., This work is partially supported by the European Union H2020 program through the AXIOM project (grant ICT-01-2014 GA 645496) and HiPEAC (GA 687698), by the Spanish Government through Programa Severo Ochoa (SEV-2011-0067), by the Spanish Ministerio de Economia y Competitividad under contract Computacion de Altas Prestaciones VII (TIN2015-65316-P), and the Departament d’Innovacio, Universitats i Empresa de la Generalitat de Catalunya, under project MPEXPAR: Models de Programacio i Entorns d’Execucio Paral·lels (2014-SGR-1051)., Peer Reviewed, Postprint (author's final draft)