Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Anomalous diffusion of motile colloids dispersed in liquid crystals

  • Pagès Casas, Josep M.
  • Ignés i Mullol, Jordi
  • Sagués i Mestre, Francesc
We study the superdiffusion of driven colloidal particles dispersed in a nematic liquid crystal. While motion is ballistic in the driving direction, our experiments show that transversal fluctuations become superdiffusive depending on the topological defect pattern around the inclusions. The phenomenon can be reproduced with different driving methods and propulsion speeds, while it is strongly dependent on particle size and temperature. We propose a mechanism based on the geometry of the liquid crystal backflow around the inclusions to justify the persistence of thermal fluctuations and to explain the observed temperature and particle size dependence of the superdiffusive behavior based on material and geometrical parameters.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Direct measurement of Lighthill's energetic efficiency of a minimal magnetic microswimmer

  • Calero Borrallo, Carles
  • García-Torres, J.
  • Ortiz-Ambriz, Antonio
  • Sagués i Mestre, Francesc
  • Pagonabarraga Mora, Ignacio
  • Tierno, Pietro
The realization of artificial microscopic swimmers able to propel in viscous fluids is an emergent research field of fundamental interest and vast technological applications. For certain functionalities, the efficiency of the microswimmer in converting the input power provided through an external actuation into propulsive power output can be critical. Here we use a microswimmer composed by a self-assembled ferromagnetic rod and a paramagnetic sphere and directly determine its swimming efficiency when it is actuated by a swinging magnetic field. Using fast video recording and numerical simulations we fully characterize the dynamics of the propeller and identify the two independent degrees of freedom which allow its propulsion. We then obtain experimentally the Lighthill's energetic efficiency of the swimmer by measuring the power consumed during propulsion and the energy required to translate the propeller at the same speed. Finally, we discuss how the efficiency of our microswimmer could be increased upon suitable tuning of the different experimental parameters.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Colchicine and osmotic stress for improving anther culture efficiency on long grain temperate and tropical japonica rice genotypes

  • Ferreres, Irene
  • Ortega, Mirari
  • López Cristoffanini, Camilo Alonso
  • Nogués Mestres, Salvador
  • Serrat Gurrera, Xavier
Anther culture is an efficient tool to obtain new plant varieties or improve the existing ones. In rice, this procedure is performed in two steps, induction of calli from anthers and regeneration of plantlets from the calli. Genotype highly influences the efficiency of anther culture, so the media used in each step must be optimized. In this study, we tested different media for two temperate japonica rice varieties, NRCV and PL12, and two tropical japonica rice varieties that had been never tested before, 303012 and 303013. We found that induction media with 150 mg · L-1 of colchicine worked best for NRCV, 303012 and 303013. Colchicine-free induction media gave the best results with PL12. Referring to the regeneration, GERM media provided the best regeneration rates, and SARM media worked best in the case of PL12, 303012 and 303013. The presence of colchicine in the induction media was also related to the obtention of double haploid plantlets. This study has shown the importance of genotype in the performance of rice anther culture, has optimized it for the NRCV and PL12 varieties, and has set a first study on 303012 and 303013 varieties in anther culture.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Assembly and transport of nematic colloidal swarms above photo-patterned defects and surfaces

  • Straube, Arthur V.
  • Pagès Casas, Josep M.
  • Ortiz-Ambriz, Antonio
  • Tierno, Pietro
  • Ignés i Mullol, Jordi
  • Sagués i Mestre, Francesc
We investigate the dynamic assembly and swarm translocation of anisometric colloidal particles dispersed in a nematic liquid crystal and driven above a photosensitive surface. We use liquid crystal-enabled electrophoresis to propel these particles via an alternating electric field perpendicular to the sample cell. By manipulating the anchoring conditions on one surface of the experimental cell, we obtain a spatially extended spiral pattern of the liquid crystal orientation that induces the dynamic assembly of a rotating colloidal mill. This structure can be transported by translocating the topological defect above the photosensitive surface. We complement our findings with a theoretical model that captures the basic physics of the process, by formulating an analytic equation for the director field above the surface. Our reconfigurable nematic assemblies may be used as a test bed for complex swarming behaviour in biological and artificial microscale systems.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Microscale magneto-elastic composite swimmers at the air-water and water-solid interfaces under a uniaxial field

  • Bryan, M. T.
  • García-Torres, J.
  • Martin, E. L.
  • Hamilton, J. K.
  • Calero Borrallo, Carles
  • Petrov, P. G.
  • Winlove, C. P.
  • Pagonabarraga Mora, Ignacio
  • Tierno, Pietro
  • Sagués i Mestre, Francesc
  • Ogrin, F. Y.
Self-propulsion of magneto-elastic composite microswimmers is demonstrated under a uniaxial field at both the air-water and the water-substrate interfaces. The microswimmers are made of elastically linked magnetically hard Co-Ni-P and soft Co ferromagnets, fabricated using standard photolithography and electrodeposition. Swimming speed and direction are dependent on the field frequency and amplitude, reaching a maximum of 95.1 μm/s on the substrate surface. Fastest motion occurs at low frequencies via a spinning (air-water interface) or tumbling (water-substrate interface) mode that induces transient inertial motion. Higher frequencies result in low Reynolds number propagation at both interfaces via a rocking mode. Therefore, the same microswimmer can be operated as either a high or a low Reynolds number swimmer. Swimmer pairs agglomerate to form a faster superstructure that propels via spinning and rocking modes analogous to those seen in isolated swimmers. Microswimmer propulsion is driven by a combination of dipolar interactions between the Co and Co-Ni-P magnets and rotational torque due to the applied field, combined with elastic deformation and hydrodynamic interactions between different parts of the swimmer, in agreement with previous models.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Tunable self-healing of magnetically propelling colloidal carpets

  • Massana-Cid, Helena
  • Meng, Fanlong
  • Matsunaga, Daiki
  • Golestanian, Ramin
  • Tierno, Pietro
The process of crystallization is difficult to observe for transported, out-of-equilibrium sys-tems, as the continuous energy injection increases activity and competes with ordering. Inemergingfields such as microfluidics and active matter, the formation of long-range order isoften frustrated by the presence of hydrodynamics. Here we show that a population ofcolloidal rollers assembled by magneticfields into large-scale propelling carpets can formperfect crystalline materials upon suitable balance between magnetism and hydrodynamics.We demonstrate afield-tunable annealing protocol based on a controlled colloidalflow abovethe carpet that enables complete crystallization after a few seconds of propulsion. Thestructural transition from a disordered to a crystalline carpet phase is captured via spatial andtemporal correlation functions. Ourfindings unveil a novel pathway to magnetically annealclusters of propelling particles, bridging driven systems with crystallization and freezing inmaterial science.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Magnetically tunable bidirectional locomotion of a self-assembled nanorod-sphere propeller

  • García Torres, José Manuel|||0000-0002-3996-0274
  • Calero, Carles
  • Sagués Mestres, Francesc
  • Pagonabarraga, I.
  • Tierno, Prieto
Field-driven direct assembly of nanoscale matter has impact in disparate fields of science. In microscale systems, such concept has been recently exploited to optimize propulsion in viscous fluids. Despite the great potential offered by miniaturization, using self-assembly to achieve transport at the nanoscale remains an elusive task. Here we show that a hybrid propeller, composed by a ferromagnetic nanorod and a paramagnetic microsphere, can be steered in a fluid in a variety of modes, from pusher to puller, when the pair is dynamically actuated by a simple oscillating magnetic field. We exploit this unique design to build more complex structures capable of carrying several colloidal cargos as microscopic trains that quickly disassemble at will under magnetic command. In addition, our prototype can be extended to smaller nanorods below the diffraction limit, but still dynamically reconfigurable by the applied magnetic field., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Colchicine and osmotic stress for improving anther culture efficiency on long grain temperate and tropical japonica rice genotypes

  • Ferreres, Irene
  • Ortega, Mirari
  • López Cristoffanini, Camilo Alonso
  • Nogués Mestres, Salvador
  • Serrat Gurrera, Xavier
Anther culture is an efficient tool to obtain new plant varieties or improve the existing ones. In rice, this procedure is performed in two steps, induction of calli from anthers and regeneration of plantlets from the calli. Genotype highly influences the efficiency of anther culture, so the media used in each step must be optimized. In this study, we tested different media for two temperate japonica rice varieties, NRCV and PL12, and two tropical japonica rice varieties that had been never tested before, 303012 and 303013. We found that induction media with 150 mg · L-1 of colchicine worked best for NRCV, 303012 and 303013. Colchicine-free induction media gave the best results with PL12. Referring to the regeneration, GERM media provided the best regeneration rates, and SARM media worked best in the case of PL12, 303012 and 303013. The presence of colchicine in the induction media was also related to the obtention of double haploid plantlets. This study has shown the importance of genotype in the performance of rice anther culture, has optimized it for the NRCV and PL12 varieties, and has set a first study on 303012 and 303013 varieties in anther culture.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Direct measurement of Lighthill's energetic efficiency of a minimal magnetic microswimmer

  • Calero Borrallo, Carles
  • García-Torres, J.
  • Ortiz-Ambriz, Antonio
  • Sagués i Mestre, Francesc
  • Pagonabarraga Mora, Ignacio
  • Tierno, Pietro
The realization of artificial microscopic swimmers able to propel in viscous fluids is an emergent research field of fundamental interest and vast technological applications. For certain functionalities, the efficiency of the microswimmer in converting the input power provided through an external actuation into propulsive power output can be critical. Here we use a microswimmer composed by a self-assembled ferromagnetic rod and a paramagnetic sphere and directly determine its swimming efficiency when it is actuated by a swinging magnetic field. Using fast video recording and numerical simulations we fully characterize the dynamics of the propeller and identify the two independent degrees of freedom which allow its propulsion. We then obtain experimentally the Lighthill's energetic efficiency of the swimmer by measuring the power consumed during propulsion and the energy required to translate the propeller at the same speed. Finally, we discuss how the efficiency of our microswimmer could be increased upon suitable tuning of the different experimental parameters.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Anomalous diffusion of motile colloids dispersed in liquid crystals

  • Pagès Casas, Josep M.
  • Ignés i Mullol, Jordi
  • Sagués i Mestre, Francesc
We study the superdiffusion of driven colloidal particles dispersed in a nematic liquid crystal. While motion is ballistic in the driving direction, our experiments show that transversal fluctuations become superdiffusive depending on the topological defect pattern around the inclusions. The phenomenon can be reproduced with different driving methods and propulsion speeds, while it is strongly dependent on particle size and temperature. We propose a mechanism based on the geometry of the liquid crystal backflow around the inclusions to justify the persistence of thermal fluctuations and to explain the observed temperature and particle size dependence of the superdiffusive behavior based on material and geometrical parameters.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Magnetically tunable bidirectional locomotion of a self-assembled nanorod-sphere propeller

  • García Torres, José Manuel
  • Calero, Carles
  • Sagués Mestres, Francesc
  • Pagonabarraga, I.
  • Tierno, Prieto
Field-driven direct assembly of nanoscale matter has impact in disparate fields of science. In microscale systems, such concept has been recently exploited to optimize propulsion in viscous fluids. Despite the great potential offered by miniaturization, using self-assembly to achieve transport at the nanoscale remains an elusive task. Here we show that a hybrid propeller, composed by a ferromagnetic nanorod and a paramagnetic microsphere, can be steered in a fluid in a variety of modes, from pusher to puller, when the pair is dynamically actuated by a simple oscillating magnetic field. We exploit this unique design to build more complex structures capable of carrying several colloidal cargos as microscopic trains that quickly disassemble at will under magnetic command. In addition, our prototype can be extended to smaller nanorods below the diffraction limit, but still dynamically reconfigurable by the applied magnetic field., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Microscale magneto-elastic composite swimmers at the air-water and water-solid interfaces under a uniaxial field

  • Bryan, M. T.
  • García-Torres, J.
  • Martin, E. L.
  • Hamilton, J. K.
  • Calero Borrallo, Carles
  • Petrov, P. G.
  • Winlove, C. P.
  • Pagonabarraga Mora, Ignacio
  • Tierno, Pietro
  • Sagués i Mestre, Francesc
  • Ogrin, F. Y.
Self-propulsion of magneto-elastic composite microswimmers is demonstrated under a uniaxial field at both the air-water and the water-substrate interfaces. The microswimmers are made of elastically linked magnetically hard Co-Ni-P and soft Co ferromagnets, fabricated using standard photolithography and electrodeposition. Swimming speed and direction are dependent on the field frequency and amplitude, reaching a maximum of 95.1 μm/s on the substrate surface. Fastest motion occurs at low frequencies via a spinning (air-water interface) or tumbling (water-substrate interface) mode that induces transient inertial motion. Higher frequencies result in low Reynolds number propagation at both interfaces via a rocking mode. Therefore, the same microswimmer can be operated as either a high or a low Reynolds number swimmer. Swimmer pairs agglomerate to form a faster superstructure that propels via spinning and rocking modes analogous to those seen in isolated swimmers. Microswimmer propulsion is driven by a combination of dipolar interactions between the Co and Co-Ni-P magnets and rotational torque due to the applied field, combined with elastic deformation and hydrodynamic interactions between different parts of the swimmer, in agreement with previous models.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assembly and transport of nematic colloidal swarms above photo-patterned defects and surfaces

  • Straube, Arthur V.
  • Pagès Casas, Josep M.
  • Ortiz-Ambriz, Antonio
  • Tierno, Pietro
  • Ignés i Mullol, Jordi
  • Sagués i Mestre, Francesc
We investigate the dynamic assembly and swarm translocation of anisometric colloidal particles dispersed in a nematic liquid crystal and driven above a photosensitive surface. We use liquid crystal-enabled electrophoresis to propel these particles via an alternating electric field perpendicular to the sample cell. By manipulating the anchoring conditions on one surface of the experimental cell, we obtain a spatially extended spiral pattern of the liquid crystal orientation that induces the dynamic assembly of a rotating colloidal mill. This structure can be transported by translocating the topological defect above the photosensitive surface. We complement our findings with a theoretical model that captures the basic physics of the process, by formulating an analytic equation for the director field above the surface. Our reconfigurable nematic assemblies may be used as a test bed for complex swarming behaviour in biological and artificial microscale systems.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tunable self-healing of magnetically propelling colloidal carpets

  • Massana-Cid, Helena
  • Meng, Fanlong
  • Matsunaga, Daiki
  • Golestanian, Ramin
  • Tierno, Pietro
The process of crystallization is difficult to observe for transported, out-of-equilibrium sys-tems, as the continuous energy injection increases activity and competes with ordering. Inemergingfields such as microfluidics and active matter, the formation of long-range order isoften frustrated by the presence of hydrodynamics. Here we show that a population ofcolloidal rollers assembled by magneticfields into large-scale propelling carpets can formperfect crystalline materials upon suitable balance between magnetism and hydrodynamics.We demonstrate afield-tunable annealing protocol based on a controlled colloidalflow abovethe carpet that enables complete crystallization after a few seconds of propulsion. Thestructural transition from a disordered to a crystalline carpet phase is captured via spatial andtemporal correlation functions. Ourfindings unveil a novel pathway to magnetically annealclusters of propelling particles, bridging driven systems with crystallization and freezing inmaterial science.