Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Electro-optic THz dual-comb architecture for high-resolution, absolute spectroscopy

  • Jerez González, Borja
  • Walla, Frederik William
  • Betancur Pérez, Andrés Felipe
  • Martín Mateos, Pedro
  • Dios Fernández, Cristina de
  • Acedo Gallardo, Pablo
An absolute-frequency terahertz (THz) dual-frequency comb spectrometer based on electro-optic modulators for tunable, high-resolution, and real-time rapid acquisition is presented. An optical line of a master frequency comb (filtered via optical injection locking) serves as the seed to electro-optically generate a pair of new frequency combs (probe and local oscillator). Photomixing both combs with another coherent line from the same original master comb generates a narrow linewidth THz dual-comb with teeth frequencies that can be referenced to a radio-frequency standard. The system is validated with a proof-of-principle measurement of a microwave filter in the W-band., Ministerio de Economía y Competitividad (MINECO) (TEC2017-86271-R); Ministerio de Educación, Cultura y Deporte (MECD) FPU Program (FPU014/06338); H2020 European Research Council (ERC) (H2020-MSCAITN-2015).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

High-gain, circularly-polarized THz Antenna with proper modeling of structures with thin metallic walls

  • Warmowska, Dominika
  • Abdalmalak Dawoud, Kerlos Atia
  • García Muñoz, Luis Enrique
  • Raida, Zbynek
In the paper, a corporate feed antenna array with slot radiators and a layer of polarizing patches is designed to operate at 350 GHz. The antenna is conceived as a silicon structure fully metalized by gold. Different methods for modeling thin gold layers at terahertz frequencies are compared and the optimum approaches are chosen depending on the thickness of the metal layer and its relation to the skin depth. Two designed antenna arrays are in 2×2 and 4×4 configuration, radiate circularly polarized waves, and have high gains of 13.8 dBic and 18.4 dBic, respectively. Antenna arrays have a low profile of only 1.3 Lambda 0 . Cheaper and more available manufacturing technology is presented and discussed in detail together with the measurement results of three manufactured prototypes. Small deviations between the simulated results and the measured ones are obtained due to a lower surface roughness, which is confirmed by the scanning probe microscope. Comparison with state-of-the-art antenna arrays demonstrates that the proposed arrays excel in easy/low-cost manufacturing, high gain, circular polarization with good axial-ratio bandwidth, compact size, and the possibility to easily extend the array into a larger version., This work was supported in part by the Innovative Training Network Convergence of Electronics and Photonics Technologies for Enabling Terahertz Applications (ITN CELTA) through the H2020 under Grant 675683, in part by the CEITEC Nano Research Infrastructure through the Ministry of Education, Youth and Sport of the Czech Republic (MEYS CR) under Grant LM2018110, and in part by Comunidad de Madrid MARTINLARA Project under Grant P2018/NMT-4333.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Hyperspectral terahertz imaging with electro-optic dual combs and a FET-based detector

  • Martín Mateos, Pedro
  • Čibiraitė-Lukenskienė, Dovile
  • Dios Fernández, Cristina de
  • Acedo Gallardo, Pablo
In this paper, a terahertz hyperspectral imaging architecture based on an electro-optic terahertz dual-comb source is presented and demonstrated. In contrast to single frequency sources, this multiheterodyne system allows for the characterization of the whole spectral response of the sample in parallel for all the frequency points along the spectral range of the system. This hence provides rapid, highly consistent results and minimizes measurement artifacts. The terahertz illumination signal can be tailored (in spectral coverage and resolution) with high fexibility to meet the requirements of any particular application or experimental scenario while maximizing the signal-to-noise ratio of the measurement. Besides this, the system provides absolute frequency accuracy and a very high coherence that allows for direct signal detection without inter-comb synchronization mechanisms, adaptive acquisition, or post-processing. Using a feld-efect transistor-based terahertz resonant 300GHz detector and the raster-scanning method we demonstrate the two-dimensional hyperspectral imaging of samples of diferent kinds to illustrate the remarkable capabilities of this innovative architecture. A proof-of-concept demonstration has been performed in which tree leaves and a complex plastic fragment have been analyzed in the 300 GHz range with a frequency resolution of 10 GHz., This project has received funding from the ATTRACT project funded by the EC under Grant Agreement 777222 and from the Spanish Ministry of Economy and Competitiveness under Project TEC2017-86271-R. The work has also been partially funded by the EU H2020 Celta project under Grant Agreement 675683 and the Foundation for Polish Science under grant IRA CENTERA. Viktor Krozer is thankful for partial financial support in the frame of the Chairs of Excellence program of the Universidad Carlos III, Madrid, Spain.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Frequency selective optoelectronic downconversion of a Terahertz Pulse Using ErAs:In(Al)GaAs Photoconductors

  • Fernandez Olvera, Anuar De Jesus
  • Krause, Benedikt Leander
  • Betancur Pérez, Andrés Felipe
  • Nandi, Uttam
  • Dios Fernández, Cristina de
  • Acedo Gallardo, Pablo
  • Preu, Sascha
We introduce a new scheme for the detection of terahertz pulses based on the frequency selective optoelectronic downconversion of its individual modes with a continous-wave (CW) ErAs:InGaAs photoconductive antenna (PCA) driven by a comb-based CW photonic signal. The detection scheme can be used as metrology tool for the analysis of the fundamental resolution and stability limits of terahertz pulses and the mode-locked-lasers (MLLs) that drives them, as well as an ultra-high-resolution measurement technique for terahertz components or gas spectroscopy. We demonstrate both applications by measuring the linewidth of two frequency components of the particular terahertz pulse analyzed here (one at 75 GHz and one at 340 GHz) and by measuring a very narrowband filter between 70 and 80 GHz. The main advantage of this technique with respect to other terahertz pulse detection schemes is its capability of performing ultra-high-resolution measurements without the need of unpractically long scanning ranges or synchronization of two MLLs., This work was supported in part by the European Union Marie Curie Sklodowska Actions through the Innovative Training Network (ITN), (CELTA) under Project 675683, and in part by the European Starting Grant (ERC) (Pho-T-Lyze) under Project 713780., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Flexible electro-optic, single-crystal difference frequency generation architecture for ultrafast mid-infrared dual-comb spectroscopy

  • Jerez González, Borja
  • Martín Mateos, Pedro
  • Walla, Frederik William
  • Dios Fernández, Cristina de
  • Acedo Gallardo, Pablo
Crowded with the fundamental signatures of many popular molecules, the mid-infrared range of the electromagnetic spectrum is particularly attractive for applications ranging from identification of transient phenomena to sensing of trace gases. Dual-comb spectroscopy is a technique that unveils the potential to access this region with a pair of phase-locked optical frequency combs on a high-resolution, real-time basis without the mechanical limitations of traditional spectrometers. As the ideal characteristics of an optical frequency comb are strongly influenced by the target application, electro-optic dual-comb systems are one of the most promising solutions with full capabilities to neatly fit to the application of interest beyond laboratory environments. Parameters such as resolution, measurement speed, or central wavelength are easily adjustable by means of compact, low-cost arrangements based on commercial off-the-shelf components. To fully exploit their potential for molecular spectroscopy, we present here a modular instrument designed to perform ultrafast dual-comb spectroscopy in the mid-infrared region. The architecture comprises a fiberized near-infrared electro-optic dual-comb scheme and a single-crystal difference frequency generation module to generate mid-infrared combs, thus significantly alleviating the complexity of the free-space setup while preserving absolute independence between the instrument and the sample of study. The feasibility of the instrument is successfully validated by recovering the absorption profile of methane at 2896.98 cm-1 within tens of microseconds., The authors would like to thank the Spanish Ministry of Economy and Competitiveness for supporting the project under the grant TEC-2014-52147-R (MOSSI). The work by B.J. has been performed in the frame of an FPU Program, #FPU014/06338, granted by the Spanish Ministry of Education, Culture and Sports. The work by F.W. is supported by the Europeanproject H2020-MSCA-ITN-2015 (CELTA).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Photonic integrated frequency shifter based on double side band modulation: Performance analysis

  • Betancur Pérez, Andrés Felipe
  • Dios Fernández, Cristina de
  • Acedo Gallardo, Pablo
This article belongs to the Special Issue Recent Advances in THz and Microwave Photonics., In this research, we present an analysis of a photonic integrated frequency shifter as a stage for a THz dual comb generator. We studied the performance of the PIC by simulating it with standard building blocks, and aimed toward an improvement of the output signal quality. We revised two approaches of the PIC by simulating two modes of generating a double side band modulation suppressed carrier (DSB-SC) with a Mach Zehnder modulator structure (MZM). One approach was using a single Electro-Optic Phase Modulator (EOPM) on an MZM structure (SE-MZM), and the other one was using Double EOPM (DE-MZM). We found a cleaner spectrum with the DE-MZM, since this structure is usually applied to reduce the chirp effect in optical communication systems. We obtained 23 dB of side mode suppression ratio SMSR with one filter, and 44 dB of SMSR with a two-stage filter. In the case of DE-MZM, we obtained a clean tone on intermediate frequency (IF) free of spurious sidebands and comb in IF frequency with 10 dB more power compared to SE-MZM., This research was supported by Instituto Tecnológico Metropolitano under the project P21101 "Fortalecimiento y Consolidación del Grupo Automática, Electrónica y Ciencias Computacionales para Responder a las Necesidades de las Industrias 4.0". This work was also supported by Universidad Carlos III de Madrid, the EU H2020 Celta project under Grant Agreement 675683, by the Spanish Ministry of Economy and Competitiveness under Project TEC2017-86271-R and by the ATTRACT project funded by the EC under Grant Agreement 777222.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Design of a Multipurpose Photonic Chip Architecture for THz Dual-Comb Spectrometers

  • Betancur Pérez, Andrés Felipe
  • Martín Mateos, Pedro
  • Dios Fernández, Cristina de
  • Acedo Gallardo, Pablo
This article belongs to the Special Issue Terahertz Sensing and Imaging Technologies., In this work, we present a multipurpose photonic integrated circuit capable of generating multiheterodyne complex Dual-Combs (DC) THz signals. Our work focuses on translating the functionality of an electro-optic tunable DC system into a photonic chip employing standard building blocks to ensure the scalability and cost efficiency of the integrated device. The architecture we analyze for integration is based on three stages: a seed comb, a mode selection stage and a DC stage. This final DC stage includes a frequency shifter, a key element to improve the final detection of the THz signals and obtain real-time operation. This investigation covers three key aspects: (1) a solution for comb line selection on GHz spaced combs using OIL or OPLL on photonic chips is studied and evaluated, (2) a simple and versatile scheme to produce a frequency shift using the double sideband suppressed carrier modulation technique and an asymmetric Mach Zehnder Interferometer to filter one of the sidebands is proposed, and (3) a multipurpose architecture that can offer a versatile effective device, moving from application-specific PICs to general-purpose PICs. Using the building blocks (BBs) available from an InP-based foundry, we obtained simulations that offer a high-quality Dual-Comb frequency shifted signal with a side mode suppression ratio around 21 dB, and 41 dB after photodetection with an intermediate frequency of 1 MHz. We tested our system to generate a Dual-Comb with 10 kHz of frequency spacing and an OOK modulation with 5 Gbps which can be down-converted to the THz range by a square law detector. It is also important to note that the presented architecture is multipurpose and can also be applied to THz communications. This design is a step to enable a commercial THz photonic chip for multiple applications such as THz spectroscopy, THz multispectral imaging and THz telecommunications and offers the possibility of being fabricated in a multi-project wafer., This research was supported by Instituto Tecnológico Metropolitano, Universidad Carlos III de Madrid, the EU H2020 Celta project under Grant Agreement 675683, by the Spanish Ministry of Economy and Competitiveness under Project TEC2017-86271-R and by the ATTRACT project funded by the EC under Grant Agreement 777222.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Fully Frequency-Locked Multiheterodyne Architecture for Remote Optical Frequency Comb Rapid Detection

  • Jerez González, Borja
  • Walla, Frederik William
  • Dios Fernández, Cristina de
  • Martín Mateos, Pedro
  • Acedo Gallardo, Pablo
In this paper, a new approach to optical frequency comb (OFC) detection based on a multiheterodyne arrangement is presented. The architecture relies on optical injection locking as a mechanism to induce coherence between an incoming remote OFC and a local oscillator comb with slightly different repetition frequency to retrieve the information encoded in the former. An additional RF locking technique between combs is also implemented, cancelling any frequency drifts and ensuring the temporal stability of the detection scheme while preserving its autonomy from any remote comb. The detection system is validated by recording the coherently averaged transmission spectra of a fibre Bragg grating sensor imprinted into an electro-optic comb around 1540 nm within 100 mu s integration time. While maintaining the range of advantages of dual-comb architectures, such as simultaneous access to manifold spectral points, high resolution, and ultrafast measurement times, the presented system holds promise for being employed as a remote comb detector for different field applications., Spanish Ministry of Economy and Competitiveness for supporting the project under the TEC-2014-52147-R (MOSSI). The work by Borja Jerez has been performed in the frame of a FPU Program, #FPU014/06338, granted by the Spanish Ministry of Education, Culture and Sports. The work by Frederik Walla is supported by the European project H2020-MSCA-ITN-2015 (CELTA).
Archivo Digital UPM
Publicación Tesis doctoral (DoctoralThesis)

Design and experimental validation of antenna-coupled devices for terahertz applications

Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Broadband Sensing Around 1 THz Via a Novel Biquad-Antenna-Coupled Low-NEP Detector in CMOS

  • Ferreras Mayo, Marta|||0000-0001-5231-7251
  • Čibiraitė-Lukenskienė, Dovilė|||0000-0002-1949-6312
  • Lisauskas, Alvydas|||0000-0002-1610-4221
  • Grajal de la Fuente, Jesús|||0000-0001-8081-2815
  • Krozer, Viktor|||0000-0002-2387-1947
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Substrate-illuminated THz antenna-coupled detectors in CMOS: analytical and experimental comparison of various designs

  • Ferreras Mayo, Marta|||0000-0001-5231-7251
  • Čibiraitė-Lukenskienė, Dovilė|||0000-0002-1949-6312
  • Lisauskas, Alvydas|||0000-0002-1610-4221
  • Grajal de la Fuente, Jesús|||0000-0001-8081-2815
  • Krozer, Viktor|||0000-0002-2387-1947