Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Superhydrophobic Bilayer Coating Based on Annealed Electrospun Ultrathin Poly(ε-caprolactone) Fibers and Electrosprayed Nanostructured Silica Microparticles for Easy Emptying Packaging Applications

  • Lasprilla-Botero, Juliana
  • Torres-Giner, Sergio
  • Pardo Figuérez, María
  • Álvarez-Láinez, Mónica
  • Lagarón Cabello, José María
A coating rendering superhydrophobic properties to low-density polyethylene (LDPE) films used in packaging applications was herein generated by means of the electrohydrodynamic processing (EHDP) technique. To this end, electrospun ultrathin poly(ε-caprolactone) (PCL) fibers, followed by electrosprayed nanostructured silica (SiO<sub>2</sub>) microparticles, were deposited on top of the LDPE film. Various electrospinning and electrospraying times were tested and optimized followed by a thermal post-treatment to provide physical adhesion between the bilayer coating and the LDPE substrate. The morphology, hydrophobicity, permeance to limonene, and thermal stability of the resultant nanostructured coatings were characterized. It was observed that by controlling both the deposition time of the electrospun ultrathin PCL fibers and the electrosprayed SiO<sub>2</sub> microparticles, as well as the conditions of the thermal post-treatment, effective superhydrophobic coatings were developed onto the LDPE films. The resultant multilayer presented a hierarchical micro/nanostructured surface with an apparent contact angle of 157° and a sliding angle of 8°. The addition of silica reduced, to some extent, the limonene (aroma) barrier, likely due to the increased surface-to-volume ratio, which allowed permeant sorption to occur but improved the thermal stability of the LDPE/PCL film. As a result, the developed multilayer system of LDPE/PCL/SiO<sub>2</sub> has significant potential for use in easy-to-empty packaging applications of high water activity products., This study was funded by the EU H2020 project OPTINANOPRO (reference number 686116) and the MINECO project AGL2015-63855-C2-1-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superhydrophobic Bio-Coating Made by Co-Continuous Electrospinning and Electrospraying on Polyethylene Terephthalate Films Proposed as Easy Emptying Transparent Food Packaging

  • Pardo Figuérez, María
  • López-Córdoba, Alex
  • Torres Giner, Sergio
  • Lagarón Cabello, José María
Interest in coated films with micro/nanofeatures has grown rapidly in recent years due to their enhanced functional performance and better durability under demanding contact conditions or aggressive environments. In the current work, it is reported a one-step co-continuous bilayer coating process to generate a multilayer film that rendered superhydrophobicity to a polyethylene terephthalate (PET) substrate. A continuous coating based on ultrathin polylactide (PLA) fibers was deposited onto PET films by means of electrospinning, which increased the water contact angle of the substrate. Sequentially, nanostructured silica (SiO2) microparticles were electrosprayed onto the coated PET/PLA films to achieve superhydrophobic behavior. This multilayer was then treated at different annealing temperatures, that is, 150 ◦C, 160 ◦C, and 170 ◦C, in order to create interlayers’ adhesion to each other and to the substrate. It was found that co-continuous deposition of PLA fibers and nanostructured SiO2 microparticles onto PET films constituted a useful strategy to increase the surface hydrophobicity of the PET substrate, achieving an optimal apparent water contact angle of 170◦ and a sliding angle of 6◦. Unfortunately, a reduction in background transparency was observed compared to the uncoated PET film, especially after electrospraying of the SiO2 microparticles but the films were seen to have a good contact transparency. The materials developed show significant potential in easy emptying transparent food packaging applications., This study was funded by the EU H2020 OPTINANOPRO project (No. 686116). Acknowledgments: S.T.-G. would like to thank the Ministry of Science, Innovation, and Universities (MICIU) for his Juan de la Cierva contract (IJCI-2016-29675)., Peer reviewed