Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A generic finite element framework on parallel tree-based adaptive meshes

  • Badia, Santiago|||0000-0003-2391-4086
  • Martín, Alberto F.
  • Miranda Neiva, Eric|||0000-0002-1220-9624
  • Verdugo Rojano, Francesc|||0000-0003-3667-443X
In this work we formally derive and prove the correctness of the algorithms and data structures in a parallel, distributed-memory, generic finite element framework that supports h-adaptivity on computational domains represented as forest-of-trees. The framework is grounded on a rich representation of the adaptive mesh suitable for generic finite elements that is built on top of a low-level, light-weight forest-of-trees data structure handled by a specialized, highly parallel adaptive meshing engine, for which we have identified the requirements it must fulfill to be coupled into our framework. Atop this two-layered mesh representation, we build the rest of the data structures required for the numerical integration and assembly of the discrete system of linear equations. We consider algorithms that are suitable for both subassembled and fully assembled distributed data layouts of linear system matrices. The proposed framework has been implemented within the FEMPAR scientific software library, using p4est as a practical forest-of-octrees demonstrator. A strong scaling study of this implementation when applied to Poisson and Maxwell problems reveals remarkable scalability up to 32.2K CPU cores and 482.2M degrees of freedom. Besides, a comparative performance study of FEMPAR and the state-of-the-art deal.II finite element software shows at least comparative performance, and at most a factor of 2--3 improvement in the h-adaptive approximation of a Poisson problem with first- and second-order Lagrangian finite elements, respectively., Financial support from the European Commission under the EMUSIC and ExaQUteprojects within the Horizon 2020 Framework Programme is gratefully acknowledged (grants 690725and 800898, resp.). This work has been partially funded by the project RTI2018-096898-B-I00from the “FEDER/Ministerio de Ciencia e Innovación–Agencia Estatal de Investigación”. The firstauthor gratefully acknowledges the support received from the Catalan Government through theICREA Acadèmia Research Program. The third author gratefully acknowledges the support receivedfrom the Catalan Government through an FI fellowship (2019 FI-B2-00090; 2018 FI-B1-00095; 2017FI-B-00219). The fourth author gratefully acknowledges the support received from the Secretariad’Universitats i Recerca of the Catalan Government in the framework of the Beatriu Pinós Program(grant 2016 BP 00145). The authors thankfully acknowledge the computer resources at Marenostrum-IV and the technical support provided by the Barcelona Supercomputing Center (RES-ActivityID:FI-2018-2-0009, FI-2018-3-0029, IM-2020-1-0002)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Parametric shape optimization for combined additive–subtractive manufacturing

  • Tamellini, Lorenzo
  • Chiumenti, Michele|||0000-0002-6286-7393
  • Altenhofen, Christian
  • Attene, Marco
  • Barrowclough, Oliver
  • Livesu, Marco
The final publication is available at Springer via http://dx.doi.org/10.1007/s11837-019-03886-x, In industrial practice, additive manufacturing (AM) processes are often followed by post-processing operations such as heat treatment, subtractive machining, milling, etc., to achieve the desired surface quality and dimensional accuracy. Hence, a given part must be 3D-printed with extra material to enable this finishing phase. This combined additive/subtractive technique can be optimized to reduce manufacturing costs by saving printing time and reducing material and energy usage. In this work, a numerical methodology based on parametric shape optimization is proposed for optimizing the thickness of the extra material, allowing for minimal machining operations while ensuring the finishing requirements. Moreover, the proposed approach is complemented by a novel algorithm for generating inner structures to reduce the part distortion and its weight. The computational effort induced by classical constrained optimization methods is alleviated by replacing both the objective and constraint functions by their sparse grid surrogates. Numerical results showcase the effectiveness of the proposed approach., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical modelling of heat transfer and experimental validation in powder-bed fusion with the virtual domain approximation

  • Miranda Neiva, Eric|||0000-0002-1220-9624
  • Chiumenti, Michele|||0000-0002-6286-7393
  • Cervera Ruiz, Miguel|||0000-0003-3437-6703
  • Salsi, Emilio|||0000-0003-0853-4739
  • Piscopo, Gabriele
  • Badia, Santiago|||0000-0003-2391-4086
  • Martín Huertas, Alberto Francisco|||0000-0001-5751-4561
  • Chen, Zhuoer
  • Lee, Caroline
  • Davies, Christopher
Among metal additive manufacturing technologies, powder-bed fusion features very thin layers and rapid solidification rates, leading to long build jobs and a highly localized process. Many efforts are being devoted to accelerate simulation times for practical industrial applications. The new approach suggested here, the virtual domain approximation, is a physics-based rationale for spatial reduction of the domain in the thermal finite-element analysis at the part scale. Computational experiments address, among others, validation against a large physical experiment of 17.5[cm3]of deposited volume in 647 layers. For fast and automatic parameter estimation at such level of complexity, a high-performance computing framework is employed. It couples FEMPAR-AM,a specialized parallel finite-element software, with Dakota, for the parametric exploration. Compared to previous state-of-the-art, this formulation provides higher accuracy at the same computational cost. This sets the path to a fully virtualized model, considering an upwards-moving domain covering the last printed layers., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A scalable parallel finite element framework for growing geometries: application to metal additive manufacturing

  • Miranda Neiva, Eric|||0000-0002-1220-9624
  • Badia, Santiago|||0000-0003-2391-4086
  • Martín Huertas, Alberto Francisco|||0000-0001-5751-4561
  • Chiumenti, Michele|||0000-0002-6286-7393
This is the accepted version of the following article: [ Neiva, E, Badia, S, Martín, A F, Chiumenti, M. A scalable parallel finite element framework for growing geometries. Application to metal additive manufacturing. Int J Numer Methods Eng. 2019. https://doi.org/10.1002/nme.6085], which has been published in final form at https://onlinelibrary.wiley.com/doi/abs/10.1002/nme.6085, This work introduces an innovative parallel, fully-distributed finite element framework for growing geometries and its application to metal additive manufacturing. It is well-known that virtual part design and qualification in additive manufacturing requires highly-accurate multiscale and multiphysics analyses. Only high performance computing tools are able to handle such complexity in time frames compatible with time-to-market. However, efficiency, without loss of accuracy, has rarely held the centre stage in the numerical community. Here, in contrast, the framework is designed to adequately exploit the resources of high-end distributed-memory machines. It is grounded on three building blocks: (1) Hierarchical adaptive mesh refinement with octree-based meshes; (2) a parallel strategy to model the growth of the geometry; (3) state-of-the-art parallel iterative linear solvers. Computational experiments consider the heat transfer analysis at the part scale of the printing process by powder-bed technologies. After verification against a 3D benchmark, a strong-scaling analysis assesses performance and identifies major sources of parallel overhead. A third numerical example examines the efficiency and robustness of (2) in a curved 3D shape. Unprecedented parallelism and scalability were achieved in this work. Hence, this framework contributes to take on higher complexity and/or accuracy, not only of part-scale simulations of metal or polymer additive manufacturing, but also in welding, sedimentation, atherosclerosis, or any other physical problem where the physical domain of interest grows in time., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical modelling and experimental validation in Selective Laser Melting

  • Chiumenti, Michele|||0000-0002-6286-7393
  • Miranda Neiva, Eric|||0000-0002-1220-9624
  • Salsi, Emilio|||0000-0003-0853-4739
  • Cervera Ruiz, Miguel|||0000-0003-3437-6703
  • Badia, Santiago|||0000-0003-2391-4086
  • Moya, Joan
  • Chen, Zhuoer
  • Lee, Caroline
  • Davies, Christopher
In this work a finite-element framework for the numerical simulation of the heat transfer analysis of additive manufacturing processes by powder-bed technologies, such as Selective Laser Melting, is presented. These kind of technologies allow for a layer-by-layer metal deposition process to cost-effectively create, directly from a CAD model, complex functional parts such as turbine blades, fuel injectors, heat exchangers, medical implants, among others. The numerical model proposed accounts for different heat dissipation mechanisms through the surrounding environment and is supplemented by a finite-element activation strategy, based on the born-dead elements technique, to follow the growth of the geometry driven by the metal deposition process, in such a way that the same scanning pattern sent to the numerical control system of the AM machine is used. An experimental campaign has been carried out at the Monash Centre for Additive Manufacturing using an EOSINT-M280 machine where it was possible to fabricate different benchmark geometries, as well as to record the temperature measurements at different thermocouple locations. The experiment consisted in the simultaneous printing of two walls with a total deposition volume of 107 cm3 in 992 layers and about 33,500 s build time. A large number of numerical simulations have been carried out to calibrate the thermal FE framework in terms of the thermophysical properties of both solid and powder materials and suitable boundary conditions. Furthermore, the large size of the experiment motivated the investigation of two different model reduction strategies: exclusion of the powder-bed from the computational domain and simplified scanning strategies. All these methods are analysed in terms of accuracy, computational effort and suitable applications., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical simulation and experimental calibration of additive manufacturing by blown powder technology. Part I: thermal analysis

  • Chiumenti, Michele|||0000-0002-6286-7393
  • Lin, Xin
  • Cervera Ruiz, Miguel|||0000-0003-3437-6703
  • Lei, Wei
  • Zheng, Yuxiang
  • Huang, Weidong
Purpose This paper aims to address the numerical simulation of additive manufacturing (AM) processes. The numerical results are compared with the experimental campaign carried out at State Key Laboratory of Solidification Processing laboratories, where a laser solid forming machine, also referred to as laser engineered net shaping, is used to fabricate metal parts directly from computer-aided design models. Ti-6Al-4V metal powder is injected into the molten pool created by a focused, high-energy laser beam and a layer of added material is sinterized according to the laser scanning pattern specified by the user. Design/methodology/approach The numerical model adopts an apropos finite element (FE) activation technology, which reproduces the same scanning pattern set for the numerical control system of the AM machine. This consists of a complex sequence of polylines, used to define the contour of the component, and hatches patterns to fill the inner section. The full sequence is given through the common layer interface format, a standard format for different manufacturing processes such as rapid prototyping, shape metal deposition or machining processes, among others. The result is a layer-by-layer metal deposition which can be used to build-up complex structures for components such as turbine blades, aircraft stiffeners, cooling systems or medical implants, among others. Findings Ad hoc FE framework for the numerical simulation of the AM process by metal deposition is introduced. Description of the calibration procedure adopted is presented. Originality/value The objectives of this paper are twofold: firstly, this work is intended to calibrate the software for the numerical simulation of the AM process, to achieve high accuracy. Secondly, the sensitivity of the numerical model to the process parameters and modeling data is analyzed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Physics-based balancing domain decomposition by constraints for multi-material problems

  • Badia, Santiago|||0000-0003-2391-4086
  • Martín Huertas, Alberto Francisco|||0000-0001-5751-4561
  • Nguyen, Hieu Trung
The final publication is available at Springer via http://dx.doi.org/10.1007/s10915-018-0870-z, In this work, we present a new variant of the balancing domain decomposition by constraints preconditioner that is robust for multi-material problems. We start with a well-balanced subdomain partition, and based on an aggregation of elements according to their physical coefficients, we end up with a finer physics-based (PB) subdomain partition. Next, we define corners, edges, and faces for this PB partition, and select some of them to enforce subdomain continuity (primal faces/edges/corners). When the physical coefficient in each PB subdomain is constant and the set of selected primal faces/edges/corners satisfy a mild condition on the existence of acceptable paths, we can show both theoretically and numerically that the condition number does not depend on the contrast of the coefficient across subdomains. An extensive set of numerical experiments for 2D and 3D for the Poisson and linear elasticity problems is provided to support our findings. In particular, we show robustness and weak scalability of the new preconditioner variant up to 8232 cores when applied to 3D multi-material problems with the contrast of the physical coefficient up to 108 and more than half a billion degrees of freedom. For the scalability analysis, we have exploited a highly scalable advanced inter-level overlapped implementation of the preconditioner that deals very efficiently with the coarse problem computation. The proposed preconditioner is compared against a state-of-the-art implementation of an adaptive BDDC method in PETSc for thermal and mechanical multi-material problems., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical modelling of heat transfer and experimental validation in powder-bed fusion with the virtual domain approximation

  • Miranda Neiva, Eric
  • Chiumenti, Michele
  • Cervera Ruiz, Miguel
  • Salsi, Emilio
  • Piscopo, Gabriele
  • Badia, Santiago
  • Martín Huertas, Alberto Francisco
  • Chen, Zhuoer
  • Lee, Caroline
  • Davies, Christopher
Among metal additive manufacturing technologies, powder-bed fusion features very thin layers and rapid solidification rates, leading to long build jobs and a highly localized process. Many efforts are being devoted to accelerate simulation times for practical industrial applications. The new approach suggested here, the virtual domain approximation, is a physics-based rationale for spatial reduction of the domain in the thermal finite-element analysis at the part scale. Computational experiments address, among others, validation against a large physical experiment of 17.5[cm3]of deposited volume in 647 layers. For fast and automatic parameter estimation at such level of complexity, a high-performance computing framework is employed. It couples FEMPAR-AM,a specialized parallel finite-element software, with Dakota, for the parametric exploration. Compared to previous state-of-the-art, this formulation provides higher accuracy at the same computational cost. This sets the path to a fully virtualized model, considering an upwards-moving domain covering the last printed layers., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A scalable parallel finite element framework for growing geometries: application to metal additive manufacturing

  • Miranda Neiva, Eric
  • Badia, Santiago
  • Martín Huertas, Alberto Francisco
  • Chiumenti, Michele
This is the accepted version of the following article: [ Neiva, E, Badia, S, Martín, A F, Chiumenti, M. A scalable parallel finite element framework for growing geometries. Application to metal additive manufacturing. Int J Numer Methods Eng. 2019. https://doi.org/10.1002/nme.6085], which has been published in final form at https://onlinelibrary.wiley.com/doi/abs/10.1002/nme.6085, This work introduces an innovative parallel, fully-distributed finite element framework for growing geometries and its application to metal additive manufacturing. It is well-known that virtual part design and qualification in additive manufacturing requires highly-accurate multiscale and multiphysics analyses. Only high performance computing tools are able to handle such complexity in time frames compatible with time-to-market. However, efficiency, without loss of accuracy, has rarely held the centre stage in the numerical community. Here, in contrast, the framework is designed to adequately exploit the resources of high-end distributed-memory machines. It is grounded on three building blocks: (1) Hierarchical adaptive mesh refinement with octree-based meshes; (2) a parallel strategy to model the growth of the geometry; (3) state-of-the-art parallel iterative linear solvers. Computational experiments consider the heat transfer analysis at the part scale of the printing process by powder-bed technologies. After verification against a 3D benchmark, a strong-scaling analysis assesses performance and identifies major sources of parallel overhead. A third numerical example examines the efficiency and robustness of (2) in a curved 3D shape. Unprecedented parallelism and scalability were achieved in this work. Hence, this framework contributes to take on higher complexity and/or accuracy, not only of part-scale simulations of metal or polymer additive manufacturing, but also in welding, sedimentation, atherosclerosis, or any other physical problem where the physical domain of interest grows in time., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Physics-based balancing domain decomposition by constraints for multi-material problems

  • Badia, Santiago
  • Martín Huertas, Alberto Francisco
  • Nguyen, Hieu Trung
The final publication is available at Springer via http://dx.doi.org/10.1007/s10915-018-0870-z, In this work, we present a new variant of the balancing domain decomposition by constraints preconditioner that is robust for multi-material problems. We start with a well-balanced subdomain partition, and based on an aggregation of elements according to their physical coefficients, we end up with a finer physics-based (PB) subdomain partition. Next, we define corners, edges, and faces for this PB partition, and select some of them to enforce subdomain continuity (primal faces/edges/corners). When the physical coefficient in each PB subdomain is constant and the set of selected primal faces/edges/corners satisfy a mild condition on the existence of acceptable paths, we can show both theoretically and numerically that the condition number does not depend on the contrast of the coefficient across subdomains. An extensive set of numerical experiments for 2D and 3D for the Poisson and linear elasticity problems is provided to support our findings. In particular, we show robustness and weak scalability of the new preconditioner variant up to 8232 cores when applied to 3D multi-material problems with the contrast of the physical coefficient up to 108 and more than half a billion degrees of freedom. For the scalability analysis, we have exploited a highly scalable advanced inter-level overlapped implementation of the preconditioner that deals very efficiently with the coarse problem computation. The proposed preconditioner is compared against a state-of-the-art implementation of an adaptive BDDC method in PETSc for thermal and mechanical multi-material problems., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical simulation and experimental calibration of additive manufacturing by blown powder technology. Part I: thermal analysis

  • Chiumenti, Michele
  • Lin, Xin
  • Cervera Ruiz, Miguel
  • Lei, Wei
  • Zheng, Yuxiang
  • Huang, Weidong
Purpose This paper aims to address the numerical simulation of additive manufacturing (AM) processes. The numerical results are compared with the experimental campaign carried out at State Key Laboratory of Solidification Processing laboratories, where a laser solid forming machine, also referred to as laser engineered net shaping, is used to fabricate metal parts directly from computer-aided design models. Ti-6Al-4V metal powder is injected into the molten pool created by a focused, high-energy laser beam and a layer of added material is sinterized according to the laser scanning pattern specified by the user. Design/methodology/approach The numerical model adopts an apropos finite element (FE) activation technology, which reproduces the same scanning pattern set for the numerical control system of the AM machine. This consists of a complex sequence of polylines, used to define the contour of the component, and hatches patterns to fill the inner section. The full sequence is given through the common layer interface format, a standard format for different manufacturing processes such as rapid prototyping, shape metal deposition or machining processes, among others. The result is a layer-by-layer metal deposition which can be used to build-up complex structures for components such as turbine blades, aircraft stiffeners, cooling systems or medical implants, among others. Findings Ad hoc FE framework for the numerical simulation of the AM process by metal deposition is introduced. Description of the calibration procedure adopted is presented. Originality/value The objectives of this paper are twofold: firstly, this work is intended to calibrate the software for the numerical simulation of the AM process, to achieve high accuracy. Secondly, the sensitivity of the numerical model to the process parameters and modeling data is analyzed., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical modelling and experimental validation in Selective Laser Melting

  • Chiumenti, Michele
  • Miranda Neiva, Eric
  • Salsi, Emilio
  • Cervera Ruiz, Miguel
  • Badia, Santiago
  • Moya, Joan
  • Chen, Zhuoer
  • Lee, Caroline
  • Davies, Christopher
In this work a finite-element framework for the numerical simulation of the heat transfer analysis of additive manufacturing processes by powder-bed technologies, such as Selective Laser Melting, is presented. These kind of technologies allow for a layer-by-layer metal deposition process to cost-effectively create, directly from a CAD model, complex functional parts such as turbine blades, fuel injectors, heat exchangers, medical implants, among others. The numerical model proposed accounts for different heat dissipation mechanisms through the surrounding environment and is supplemented by a finite-element activation strategy, based on the born-dead elements technique, to follow the growth of the geometry driven by the metal deposition process, in such a way that the same scanning pattern sent to the numerical control system of the AM machine is used. An experimental campaign has been carried out at the Monash Centre for Additive Manufacturing using an EOSINT-M280 machine where it was possible to fabricate different benchmark geometries, as well as to record the temperature measurements at different thermocouple locations. The experiment consisted in the simultaneous printing of two walls with a total deposition volume of 107 cm3 in 992 layers and about 33,500 s build time. A large number of numerical simulations have been carried out to calibrate the thermal FE framework in terms of the thermophysical properties of both solid and powder materials and suitable boundary conditions. Furthermore, the large size of the experiment motivated the investigation of two different model reduction strategies: exclusion of the powder-bed from the computational domain and simplified scanning strategies. All these methods are analysed in terms of accuracy, computational effort and suitable applications., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A generic finite element framework on parallel tree-based adaptive meshes

  • Badia, Santiago
  • Martín, Alberto F.
  • Miranda Neiva, Eric
  • Verdugo Rojano, Francesc
In this work we formally derive and prove the correctness of the algorithms and data structures in a parallel, distributed-memory, generic finite element framework that supports h-adaptivity on computational domains represented as forest-of-trees. The framework is grounded on a rich representation of the adaptive mesh suitable for generic finite elements that is built on top of a low-level, light-weight forest-of-trees data structure handled by a specialized, highly parallel adaptive meshing engine, for which we have identified the requirements it must fulfill to be coupled into our framework. Atop this two-layered mesh representation, we build the rest of the data structures required for the numerical integration and assembly of the discrete system of linear equations. We consider algorithms that are suitable for both subassembled and fully assembled distributed data layouts of linear system matrices. The proposed framework has been implemented within the FEMPAR scientific software library, using p4est as a practical forest-of-octrees demonstrator. A strong scaling study of this implementation when applied to Poisson and Maxwell problems reveals remarkable scalability up to 32.2K CPU cores and 482.2M degrees of freedom. Besides, a comparative performance study of FEMPAR and the state-of-the-art deal.II finite element software shows at least comparative performance, and at most a factor of 2--3 improvement in the h-adaptive approximation of a Poisson problem with first- and second-order Lagrangian finite elements, respectively., Financial support from the European Commission under the EMUSIC and ExaQUteprojects within the Horizon 2020 Framework Programme is gratefully acknowledged (grants 690725and 800898, resp.). This work has been partially funded by the project RTI2018-096898-B-I00from the “FEDER/Ministerio de Ciencia e Innovación–Agencia Estatal de Investigación”. The firstauthor gratefully acknowledges the support received from the Catalan Government through theICREA Acadèmia Research Program. The third author gratefully acknowledges the support receivedfrom the Catalan Government through an FI fellowship (2019 FI-B2-00090; 2018 FI-B1-00095; 2017FI-B-00219). The fourth author gratefully acknowledges the support received from the Secretariad’Universitats i Recerca of the Catalan Government in the framework of the Beatriu Pinós Program(grant 2016 BP 00145). The authors thankfully acknowledge the computer resources at Marenostrum-IV and the technical support provided by the Barcelona Supercomputing Center (RES-ActivityID:FI-2018-2-0009, FI-2018-3-0029, IM-2020-1-0002)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Parametric shape optimization for combined additive–subtractive manufacturing

  • Tamellini, Lorenzo
  • Chiumenti, Michele
  • Altenhofen, Christian
  • Attene, Marco
  • Barrowclough, Oliver
  • Livesu, Marco
The final publication is available at Springer via http://dx.doi.org/10.1007/s11837-019-03886-x, In industrial practice, additive manufacturing (AM) processes are often followed by post-processing operations such as heat treatment, subtractive machining, milling, etc., to achieve the desired surface quality and dimensional accuracy. Hence, a given part must be 3D-printed with extra material to enable this finishing phase. This combined additive/subtractive technique can be optimized to reduce manufacturing costs by saving printing time and reducing material and energy usage. In this work, a numerical methodology based on parametric shape optimization is proposed for optimizing the thickness of the extra material, allowing for minimal machining operations while ensuring the finishing requirements. Moreover, the proposed approach is complemented by a novel algorithm for generating inner structures to reduce the part distortion and its weight. The computational effort induced by classical constrained optimization methods is alleviated by replacing both the objective and constraint functions by their sparse grid surrogates. Numerical results showcase the effectiveness of the proposed approach., Peer Reviewed, Postprint (published version)