Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Rupture Directivity in 3D Inferred From Acoustic Emissions Events in a Mine-Scale Hydraulic Fracturing Experiment

  • López Comino, José Ángel
  • Cesca, Simone
  • Niemz, Peter
  • Dahm, Torsten
  • Zang, Arno
This research has been funded by the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement N degrees 754446 and UGR Research and Knowledge Transfer Found -Athenea3i; and by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) -Projektnummer (407141557). SC and PN received funding from the EU project PostMinQuake, RFCS (899192). AZ was supported by funding received from the European Union's Horizon 2020 research and innovation programme, Grant Agreement No. 691728 (Destress)., The in situ experiment at Äspö Hard Rock Laboratory (HRL) was supported by the GFZ German Research Center for Geosciences (75%), the KIT Karlsruhe Institute of Technology (15%) and the Nova Center for University Studies, Research and Development Oskarshamn (10%). An additional in-kind contribution of the Swedish Nuclear Fuel and Waste Management Co. (SKB) for using Äspö HRL as test site for geothermal research is greatly acknowledged., Rupture directivity, implying a predominant earthquake rupture propagation direction, is typically inferred upon the identification of 2D azimuthal patterns of seismic observations for weak to large earthquakes using surface-monitoring networks. However, the recent increase of 3D monitoring networks deployed in the shallow subsurface and underground laboratories toward the monitoring of microseismicity allows to extend the directivity analysis to 3D modeling, beyond the usual range of magnitudes. The high-quality full waveforms recorded for the largest, decimeter-scale acoustic emission (AE) events during a meter-scale hydraulic fracturing experiment in granites at similar to 410 m depth allow us to resolve the apparent durations observed at each AE sensor to analyze 3D-directivity effects. Unilateral and (asymmetric) bilateral ruptures are then characterized by the introduction of a parameter kappa, representing the angle between the directivity vector and the station vector. While the cloud of AE activity indicates the planes of the hydrofractures, the resolved directivity vectors show off-plane orientations, indicating that rupture planes of microfractures on a scale of centimeters have different geometries. Our results reveal a general alignment of the rupture directivity with the orientation of the minimum horizontal stress, implying that not only the slip direction but also the fracture growth produced by the fluid injections is controlled by the local stress conditions., European Commission 754446 691728, UGR Research and Knowledge Transfer Found -Athenea3i, German Research Foundation (DFG) 407141557, EU project PostMinQuake, RFCS 899192
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Current challenges in monitoring, discrimination, and management of induced seismicity related to underground industrial activities: A European perspective

  • Grigoli, Francesco
  • Cesca, Simone
  • Priolo, Enrico
  • Pio Rinaldi, Antonio
  • Clinton, John F.
  • Stabile, Tony A.
  • Dost, Bernard
  • García-Fernández, Mariano
  • Wiemer, Stefan
  • Dahm, Torsten
Due to the deep socioeconomic implications, induced seismicity is a timely and increasingly relevant topic of interest for the general public. Cases of induced seismicity have a global distribution and involve a large number of industrial operations, with many documented cases from as far back to the beginning of the twentieth century. However, the sparse and fragmented documentation available makes it difficult to have a clear picture on our understanding of the physical phenomenon and consequently in our ability to mitigate the risk associated with induced seismicity. This review presents a unified and concise summary of the still open questions related to monitoring, discrimination, and management of induced seismicity in the European context and, when possible, provides potential answers. We further discuss selected critical European cases of induced seismicity, which led to the suspension or reduction of the related industrial activities., This work has been funded by the EU projects DESTRESS (EU H2020 research and innovation program, grant agreement 691728) and SHEER (EU H2020 research and innovation program, grant agreement 640896), and by the Italian Ministry for the Economic Development (MiSE), General Directorate for the Mining Resources (DGRME), within the Program Agreement with OGS (record 3835 of the Corte dei Conti). A.P. Rinaldi is currently funded by a Swiss National Science Foundation, Ambizione Energy grant (PZENP2‐160555). T.A. Stabile is currently funded by the INSIEME project of the Italian SIR‐MIUR program (grant RBSI14MN31)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparison of numerical codes for coupled thermo-hydro-mechanical simulations of fractured media

  • Zareidarmiyan, Ahmad
  • Salarirad, Hossein
  • Vilarrasa, Víctor
  • Kim, Kwang-Il
  • Lee, Jaewon
  • Min, Ki-Bok
Geo-energy and geo-engineering applications, such as improved oil recovery (IOR), geologic carbon storage, and enhanced geothermal systems (EGSs), involve coupled thermo-hydro-mechanical (THM) processes that result from fluid injection and production. In some cases, reservoirs are highly fractured and the geomechanical response is controlled by fractures. Therefore, fractures should explicitly be included into numerical models to realistically simulate the THM responses of the subsurface. In this study, we perform coupled THM numerical simulations of water injection into naturally fractured reservoirs (NFRs) using CODE_BRIGHT and TOUGH-UDEC codes. CODE_BRIGHT is a finite element method (FEM) code that performs fully coupled THM analysis in geological media and TOUGH-UDEC sequentially solves coupled THM processes by combining a finite volume method (FVM) code that solves non-isothermal multiphase flow (TOUGH2) with a distinct element method (DEM) code that solves the mechanical problem (UDEC). First, we validate the two codes against a semi-analytical solution for water injection into a single deformable fracture considering variable permeability based on the cubic law. Then, we compare simulation results of the two codes in an idealized conceptual model that includes one horizontal fracture and in a more realistic model with multiple fractures. Each code models fractures differently. UDEC calculates fracture deformation from the fracture normal and shear stiffnesses, while CODE_BRIGHT treats fractures as equivalent porous media and uses the equivalent Young's modulus and Poisson's ratio of the fracture. Finally, we obtain comparable results of pressure, temperature, stress and displacement distributions and evolutions for the single horizontal fracture model. Despite some similarities, the two codes provide increasingly different results as model complexity increases. These differences highlight the challenging task of accurately modeling coupled THM processes in fractured media given their high nonlinearity., Ahmad Zareidarmiyan acknowledges the financial support received from the “Iran’s Ministry of Science Research and Technology” (PhD students' sabbatical grants). Victor Vilarrasa acknowledges funding from the European Research Council under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) (Grant Agreement No. 801809). Ki-Bok Min acknowledges the support by the Korea-EU Joint Research Program of the National Research Foundation of Korea through Grant No. NRF-2015K1A3A7A03074226 funded by the Korean Government's Ministry of Science and Information and Communication Technology (ICT) in the framework of the European Union’s Horizon 2020 Research and Innovation Program (Grant No. 691728) and Research Institute of Energy & Resources, Seoul National University., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sobre el Sistema de Financiación Foral vasco y navarro: notas para un debate necesario

  • Fuente, Ángel de la
[EN] This paper contains a critical analysis of the design and functioning of the so called foral financing system applied in the Basque Country and Navarre, with special attention to the determination of these regions’ contribution to national finances and their shares in indirect taxes. It also advances some proposals to solve the detected problems and to increase the system’s transparency. The study shows that some of the variables that play a key role in the relevant calculations are defined and/or measured in incorrect ways that generally tend to introduce a downward bias in these regions’ net contributions to the national purse., [ES] En este trabajo se analizan críticamente algunos aspectos del diseño y funcionamiento del sistema de financiación foral, con especial atención al cálculo del cupo vasco y la aportación navarra y a los ajustes a consumo de los impuestos indirectos, y se avanzan algunas propuestas para resolver los problemas detectados y aumentar la transparencia del sistema. El estudio muestra que algunas variables importantes para estos cálculos se definen de una forma técnicamente mejorable y/o no se miden correctamente en la práctica, lo que sesga sus resultados, generalmente a la baja, Este trabajo ha sido financiado en parte por el Ministerio de Economía, Industria y Competitividad a través del proyecto ECO2017-87862-P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydromechanical modeling of the hydraulic stimulations in borehole PX2 (Pohang, South Korea)

  • Alcolea, Andrés
  • Meier, Peter
  • Vilarrasa, Víctor
  • Olivella, Sebastià
  • Carrera, Jesús
A Mw 5.5 earthquake struck Pohang (South Korea) on November 2017, following a sequence of five hydraulic stimulations of an Enhanced Geothermal System (EGS). The processes that led to this earthquake, which nucleated two months after the end of the last stimulation in borehole PX2, are not well understood yet. We propose a hydromechanical model that integrates available data to understand the potential relationship between the earthquake and the EGS. Data scarcity is translated into model uncertainties, which we address with sensitivity analyses. Results show that the Mw 5.5 earthquake is linked to the high-injection overpressures of up to 90 MPa induced during the stimulations in borehole PX2 and highlight the usefulness of hydromechanical modeling to forecast the seismicity of an EGS and, more specifically, the need to integrate the low permeability fault core that hindered fluid pressure dissipation at Pohang, which explains the long delay of the mainshock., The work of Andrés Alcolea and Peter Meier was supported by the European Union Horizon 2020 research and innovation programme under grant agreement number 691728, and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 15-0316-1. The opinions expressed and arguments employed herein do not necessarily reflect the official views of the Swiss Government. Víctor Vilarrasa acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme through the Starting Grant GEoREST (www.georest.eu) under grant agreement no. 801809. IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, grant CEX2018-000794-S funded by MICIU/AEI/10.13039/501100011033). IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (grant CEX2021-001198, funded by MICIU/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000794-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed