Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

TECNALIA Publications
Publicación Artículo científico (JournalArticle)

Dual-modular architecture for developing and validation of decision and control modules for automated vehicles, Arquitectura dual-modular para desarrollos y validación de módulos de decisión y control en vehículos automatizados

  • Lattarulo, R.
  • Matute, J. A.
  • Pérez, J.
  • Gomez Garay, V.
El avance logrado durante las últimas décadas en los sistemas avanzados de asistencia a la conducción (ADAS, Advanced Driver Assistance System) ha posibilitado mejorar múltiples aspectos en los vehículos comerciales, como por ejemplo la seguridad, robustez de los sistemas, eficiencia energética, detección de peatones, aparcamiento asistido y ayudas a la navegación, entre otros. Algunos desarrollos, como el control lateral y la generación óptima de trayectorias en tiempo real, están en pleno desarrollo. En este trabajo se presenta una arquitectura dual-modular cuyas principales características son su capacidad para integrar y probar nuevos algoritmos de control y decisión (modular), y la posibilidad de llevar a cabo pruebas en entornos simulados y en plataformas reales (dual), reduciendo los tiempos y costes de desarrollo. Con esta arquitectura se han podido probar diferentes técnicas de control y de generación de trayectorias, realizando además simulaciones, y comparando los resultados obtenidos con un vehículo real.
TECNALIA Publications
Publicación Artículo científico (JournalArticle)

A Review of Sensor Technologies for Perception in Automated Driving

  • Marti, Enrique David
  • de Miguel, Miguel Angel
  • Garcia, Fernando
  • Perez, Joshue
After more than 20 years of research, ADAS are common in modern vehicles available in the market. Automated Driving systems, still in research phase and limited in their capabilities, are starting early commercial tests in public roads. These systems rely on the information provided by on-board sensors, which allow to describe the state of the vehicle, its environment and other actors. Selection and arrangement of sensors represent a key factor in the design of the system. This survey reviews existing, novel and upcoming sensor technologies, applied to common perception tasks for ADAS and Automated Driving. They are put in context making a historical review of the most relevant demonstrations on Automated Driving, focused on their sensing setup. Finally, the article presents a snapshot of the future challenges for sensing technologies and perception, finishing with an overview of the commercial initiatives and manufacturers alliances that will show future market trends in sensors technologies for Automated Vehicles.
TECNALIA Publications
Publicación Artículo científico (JournalArticle)

Low Speed Longitudinal Control Algorithms for Automated Vehicles in Simulation and Real Platforms

  • Marcano, Mauricio
  • Matute, José A.
  • Lattarulo, Ray
  • Martí, Enrique
  • Pérez, Joshué
Advanced Driver Assistance Systems (ADAS) acting over throttle and brake are already available in level 2 automated vehicles. In order to increase the level of automation new systems need to be tested in an extensive set of complex scenarios, ensuring safety under all circumstances. Validation of these systems using real vehicles presents important drawbacks: the time needed to drive millions of kilometers, the risk associated with some situations, and the high cost involved. Simulation platforms emerge as a feasible solution.Therefore, robust and reliable virtual environments to test automated driving maneuvers and control techniques are needed. In that sense, this paper presents a use case where three longitudinal low speed control techniques are designed, tuned, and validated using an in-house simulation framework and later applied in a real vehicle. Control algorithms include a classical PID, an adaptive network fuzzy inference system (ANFIS), and a Model Predictive Control (MPC). The simulated dynamics are calculated using a multibody vehicle model. In addition, longitudinal actuators of a Renault Twizy are characterized through empirical tests. A comparative analysis of results between simulated and real platform shows the effectiveness of the proposed framework for designing and validating longitudinal controllers for real automated vehicles.
TECNALIA Publications
Publicación Artículo científico (JournalArticle)

Efficient Neural Network Implementations on Parallel Embedded Platforms Applied to Real-Time Torque-Vectoring Optimization Using Predictions for Multi-Motor Electric Vehicles

  • Dendaluce Jahnke, Martin
  • Cosco, Francesco
  • Novickis, Rihards
  • Pérez Rastelli, Joshué
  • Gomez-Garay, Vicente
The combination of machine learning and heterogeneous embedded platforms enables new potential for developing sophisticated control concepts which are applicable to the field of vehicle dynamics and ADAS. This interdisciplinary work provides enabler solutions -ultimately implementing fast predictions using neural networks (NNs) on field programmable gate arrays (FPGAs) and graphical processing units (GPUs)- while applying them to a challenging application: Torque Vectoring on a multi-electric-motor vehicle for enhanced vehicle dynamics. The foundation motivating this work is provided by discussing multiple domains of the technological context as well as the constraints related to the automotive field, which contrast with the attractiveness of exploiting the capabilities of new embedded platforms to apply advanced control algorithms for complex control problems. In this particular case we target enhanced vehicle dynamics on a multi-motor electric vehicle benefiting from the greater degrees of freedom and controllability offered by such powertrains. Considering the constraints of the application and the implications of the selected multivariable optimization challenge, we propose a NN to provide batch predictions for real-time optimization. This leads to the major contribution of this work: efficient NN implementations on two intrinsically parallel embedded platforms, a GPU and a FPGA, following an analysis of theoretical and practical implications of their different operating paradigms, in order to efficiently harness their computing potential while gaining insight into their peculiarities. The achieved results exceed the expectations and additionally provide a representative illustration of the strengths and weaknesses of each kind of platform. Consequently, having shown the applicability of the proposed solutions, this work contributes valuable enablers also for further developments following similar fundamental principles.
TECNALIA Publications
Publicación Artículo científico (JournalArticle)

Dual-modular architecture for developing and validation of decision and control modules for automated vehicles: Arquitectura dual-modular para desarrollos y validación de módulos de decisión y control en vehículos automatizados

  • Lattarulo, R.
  • Matute, J. A.
  • Pérez, J.
  • Gomez Garay, V.
El avance logrado durante las últimas décadas en los sistemas avanzados de asistencia a la conducción (ADAS, Advanced Driver Assistance System) ha posibilitado mejorar múltiples aspectos en los vehículos comerciales, como por ejemplo la seguridad, robustez de los sistemas, eficiencia energética, detección de peatones, aparcamiento asistido y ayudas a la navegación, entre otros. Algunos desarrollos, como el control lateral y la generación óptima de trayectorias en tiempo real, están en pleno desarrollo. En este trabajo se presenta una arquitectura dual-modular cuyas principales características son su capacidad para integrar y probar nuevos algoritmos de control y decisión (modular), y la posibilidad de llevar a cabo pruebas en entornos simulados y en plataformas reales (dual), reduciendo los tiempos y costes de desarrollo. Con esta arquitectura se han podido probar diferentes técnicas de control y de generación de trayectorias, realizando además simulaciones, y comparando los resultados obtenidos con un vehículo real., In last decades, the advances done in the Advanced Driver Assistance System (ADAS) have improved multiple aspects in the vehicles, as: safety, system robustness, power efficiency, pedestrian detection and road lanes, assisted parking, navigation, etc. In the other hand, lateral control and generation of optimal trajectories in real time, are under development. In this work, we present a dual modular architecture. Its principal characteristics are the capacity of integrate and test new control algorithms, and the possibility of making tests with the simulation environment and the real platform (dual), reducing the development time. This architecture has been used to test different techniques for control and trajectory generation. Furthermore, the simulations have been done with a high level of precision comparing them with a real vehicle.
TECNALIA Publications
Publicación Artículo científico (JournalArticle)

Urban Motion Planning Framework Based on N-Bézier Curves Considering Comfort and Safety

  • Lattarulo, Ray
  • González, Leonardo
  • Martí, Enrique
  • Matute, José
  • Marcano, Mauricio
  • Pérez, Joshue
In last decades, great technology advances have been done related to the automotive sector, especially in Advanced Driver Assistance Systems (ADAS) developed to improve mobility in terms of comfort and safety during driving process; hence, automated driving is presented as an evolution of those systems in the present and upcoming years. The aim of this work is to present a complete framework of motion planning for automated vehicles, considering different constraints with parametric curves for lateral and longitudinal planners. Parametric Bézier curves are used as the core approach for trajectory design in intersections, roundabouts, and lane change maneuvers. Additionally, a speed planner algorithm is presented using the same parametric curve approach, considering comfort and safety. A simulation environment is used for testing the planning method in urban conditions. Finally, tests with the real platform in automated mode have been performed showing goods results.
TECNALIA Publications
Publicación Contribución de congreso (ConferenceOutput)

A Comparison Between Coupled and Decoupled Vehicle Motion Controllers Based on Prediction Models

  • Matute, Jose A.
  • Lattarulo, Ray
  • Zubizarreta, Asier
  • Perez, Joshue
In this work, a comparative study is carried out with two different predictive controllers that consider the longitudinal jerk and steering rate change as additional parameters, as additional parameters, so that comfort constraints can be included. Furthermore, the approaches are designed so that the effect of longitudinal and lateral motion control coupling can be analyzed. This way, the first controller is a longitudinal and lateral coupled MPC approach based on a kinematic model of the vehicle, while the second is a decoupled strategy based on a triple integrator model based on MPC for the longitudinal control and a double proportional curvature control for the lateral motion control. The control architecture and motion planning are exhaustively explained. The comparative study is carried out using a test vehicle, whose dynamics and low-level controllers have been simulated using the realistic simulation environment Dynacar. The performed tests demonstrate the effectiveness of both approaches in speeds higher than 30 km/h, and demonstrate that the coupled strategy provides better performance than the decoupled one. The relevance of this work relies in the contribution of vehicle motion controllers considering the comfort and its advantage over decoupled alternatives for future implementation in real vehicles.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Scenario-Based Validation &amp, Verification, the ENABLE-S3 Approach

  • Valls Mompó, Joan Josep
  • García-Gordillo, Miguel
  • Sáez Barona, Sergio|||0000-0001-8970-6808
[EN] Automated systems can be found on many current vehi- cles, either land, air or maritime. The reliability, safety and robustness of these systems is extremely important, hence validation approaches need to adapt to the ever- evolving necessities of the industry. The ENABLE-S3 architecture addresses the problem of extensive testing by introducing a set of tools and methodologies that can be used to build up a testing environment for different domains. In this manuscript, a special focus is given to the solution developed for the Reconfigurable Video Processor from the aerospace domain., This work has been conducted within the ENABLE-S3 project that has received funding from the ECSEL Joint Undertaking under grant agreement No 692455. This joint undertaking receives support from the European Unions HORIZON 2020 research and innovation programme and Austria, Denmark, Germany, Finland, Czech Republic, Italy, Spain, Portugal, Poland, Ireland, Belgium, France, Netherlands, United Kingdom, Slovakia, Norway.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Heterogeneous Runtime Monitoring for Real-Time Systems with art2kitekt

  • García-Gordillo, Miguel
  • Valls, Joan
  • Sáez Barona, Sergio|||0000-0001-8970-6808
[EN] Monitoring the execution of real-time systems has many advantages, it is not only useful to understand the behaviour of an application but also to find unfulfilled timing constraints in an implementation. However, real-time operating systems usually do not include the tracing tools to observe the behaviour during the execution. This paper presents the art2kitekt runtime monitoring tool, used to measure and to visualise the temporal characteristics of a real-time application. To demonstrate the functionality of the tool, the behaviour of an RTEMS-based application running over a Xilinx Zynq UltraScale+ is observed., The work presented in this paper has received funding from the ECSEL Joint Undertaking under grant agreement No 737475 (AQUAS project). This Joint Undertaking receives support from the European Unions Horizon 2020 research and innovation programme and Spain, France, United Kingdom, Austria, Italy, Czech Republic, Germany.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Arquitectura dual-modular para desarrollos y validación de módulos de decisión y control en vehículos automatizados, Dual-modular architecture for developing and validation of decision and control modules for automated vehicles

  • Lattarulo, R.
  • Matute, J.
  • Pérez, J.
  • Gomez Garay, V.
[ES] El avance logrado durante las últimas décadas en los sistemas avanzados de asistencia a la conducción (ADAS, Advanced Driver Assistance System) ha posibilitado mejorar múltiples aspectos en los vehículos comerciales, como por ejemplo la seguridad, robustez de los sistemas, eficiencia energética, detección de peatones, aparcamiento asistido y ayudas a la navegación, entre otros. Algunos desarrollos, como el control lateral y la generación óptima de trayectorias en tiempo real, están en pleno desarrollo. En este trabajo se presenta una arquitectura dual-modular cuyas principales características son su capacidad para integrar y probar nuevos algoritmos de control y decisión (modular), y la posibilidad de llevar a cabo pruebas en entornos simulados y en plataformas reales (dual), reduciendo los tiempos y costes de desarrollo. Con esta arquitectura se han podido probar diferentes técnicas de control y de generación de trayectorias, realizando además simulaciones, y comparando los resultados, [EN] In last decades, the advances done in the Advanced Driver Assistance System (ADAS) have improved multiple aspects in the vehicles, as: safety, system robustness, power eciency, pedestrian detection and road lanes, assisted parking, navigation, etc. In the other hand, lateral control and generation of optimal trajectories in real time, are under development. In this work, we present a dual modular architecture. Its principal characteristics are the capacity of integrate and test new control algorithms, and the possibility of making tests with the simulation environment and the real platform (dual), reducing the development time. This architecture has been used to test dierent techniques for control and trajectory generation. Furthermore, the simulations have been done with a high level of precision comparing them with a real vehicle., Proyecto ECSEL ENABLE-S3, número 692455-2
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ravenscar Support for Time-Triggered Scheduling

  • Real Sáez, Jorge Vicente|||0000-0001-7636-6672
  • Sáez Barona, Sergio|||0000-0001-8970-6808
  • Crespo, Alfons|||0000-0002-6606-7406
[EN] This position paper follows from a previous proposal to integrate a time-triggered scheduler in a prioritybased, preemptive scheduler such as that supported by Ada¿s task dispatching policy FIFO Within Priorities . The resulting combined scheduling carries the advantages of both time-triggered and priority-based scheduling, and helps mitigating their drawbacks. The paper presents a system model for the time-triggered subsystem that extends the original proposal, and describes a Ravenscar implementation of the scheduler at the run-time system level, in the form of a new package Ada.Dispatching.TTS. Multiple programming patterns can be implemented on top of this scheduler. With respect to the previously proposed full-Ada implementation, only patterns that implied the use of asynchronous transfer of control have been excluded. On the other hand, the extension of the original model enables new patterns, not supported in our previous proposal, using the new types of continuation and optional slots. We hold that bringing the time-triggered paradigm to Ravenscar is both feasible and convenient for the High-Integrity and Embedded application domains., This work has been partly supported by the Spanish Government’s project M2C2 (TIN2014-56158-C4-1-P-AR) and the European Commission’s projects ENABLE-S3 and AQUAS (ECSEL-JU, Contracts 692455 and 737475)
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Dynamic Reconfiguration under RTEMS for Fault Mitigation and Functional Adaptation in SRAM-based SoPCs for Space Systems

  • Pérez, Arturo
  • Suriano, Leonardo|||0000-0002-3206-117X
  • Otero, Andrés
  • Torre Arnanz, Eduardo de la|||0000-0001-5697-0573
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Performance Analysis of SEE Mitigation Techniques on Zynq Ultrascale+ Hardened Processing Fabrics

  • Pérez García, Arturo|||0000-0002-6629-1002
  • Otero Marnotes, Andres
  • Torre Arnanz, Eduardo de la|||0000-0001-5697-0573
Archivo Digital UPM
Publicación Tesis doctoral (DoctoralThesis)

Runtime Adaptive Hardware/Software Execution in Complex Heterogeneous Systems

Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Scalable Hardware-Based On-Board Processing for Run-Time Adaptive Lossless Hyperspectral Compression

  • Rodríguez Medina, Alfonso|||0000-0001-6326-743X
  • Santos, Lucana
  • Sarmiento, Roberto
  • Torre Arnanz, Eduardo de la|||0000-0001-5697-0573
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Implementation of the Principal Component Analysis onto High-Performance Computer Facilities for Hyperspectral Dimensionality Reduction: Results and Comparisons

  • Martel, Ernestina
  • Lazcano López, Raquel
  • López, José
  • Madroñal Quintín, Daniel|||0000-0001-5994-7440
  • Salvador Perea, Rubén|||0000-0002-0021-5808
  • López, Sebastián
  • Juárez Martínez, Eduardo|||0000-0002-6096-1511
  • Guerra, Raúl|||0000-0002-4303-3051
  • Sanz Alvaro, César|||0000-0002-2411-9132
  • Sarmiento, Roberto|||0000-0002-4843-0507
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Run-Time Reconfigurable MPSoC-Based On-Board Processor for Vision-Based Space Navigation

  • Pérez García, Arturo|||0000-0002-6629-1002
  • Rodríguez Medina, Alfonso|||0000-0001-6326-743X
  • Otero Marnotes, Andres|||0000-0003-4995-7009
  • González Arjona, David
  • Jiménez Peralo, Álvaro
  • Verdugo Rivera, Miguel Ángel
  • Torre Arnanz, Eduardo de la|||0000-0001-5697-0573
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Lossy Hyperspectral Image Compression on a Reconfigurable and Fault-Tolerant FPGA-Based Adaptive Computing Platform

  • Barrios, Yubal|||0000-0001-6186-9971
  • Rodríguez Medina, Alfonso|||0000-0001-6326-743X
  • Sánchez Clemente, Antonio José|||0000-0002-2142-7885
  • Pérez García, Arturo|||0000-0002-6629-1002
  • López Suárez, Sebastián|||0000-0002-2360-6721
  • Otero Marnotes, Andres|||0000-0003-4995-7009
  • Torre Arnanz, Eduardo de la|||0000-0001-5697-0573
  • Sarmiento, Roberto|||0000-0002-4843-0507