Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Optomechanical Crystals for Spatial Sensing of Submicron Sized Particles

  • Navarro Urrios, Daniel
  • Kang, E.
  • Xiao, P.
  • Colombano, Martín F.
  • Arregui, Guillermo
  • Graczykowski, B.
  • Capuj, Néstor E.
  • Sledzinska, M.
  • Sotomayor Torres, Clivia M.
  • Fytas, G.
Optomechanical crystal cavities (OMC) have rich perspectives for detecting and indirectly analysing biological particles, such as proteins, bacteria and viruses. In this work we demonstrate the working principle of OMCs operating under ambient conditions as a sensor of submicrometer particles by optically monitoring the frequency shift of thermally activated mechanical modes. The resonator has been specifcally designed so that the cavity region supports a particular family of low modal-volume mechanical modes, commonly known as -pinch modes-. These involve the oscillation of only a couple of adjacent cavity cells that are relatively insensitive to perturbations in other parts of the resonator. The eigenfrequency of these modes decreases as the deformation is localized closer to the centre of the resonator. Thus, by identifying specifc modes that undergo a frequency shift that amply exceeds the mechanical linewidth, it is possible to infer if there are particles deposited on the resonator, how many are there and their approximate position within the cavity region. OMCs have rich perspectives for detecting and indirectly analysing biological particles, such as proteins, viruses and bacteria.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Directional elastic wave propagation in high-aspect-ratio photoresist gratings: liquid infiltration and aging

  • Alonso-Redondo, E.
  • Gueddida, A.
  • Li, J.
  • Graczykowski, Bartlomiej
  • Sotomayor Torres, C. M.
  • Pennec, Yan
  • Yang, S.
  • Djafari-Rouhani, Bahram
  • Fytas, George
Determination of the mechanical properties of nanostructured soft materials and their composites in a quantitative manner is of great importance to improve the fidelity in their fabrication and to enable the subsequent reliable utility. Here, we report on the characterization of the elastic and photoelastic parameters of a periodic array of nanowalls (grating) by the non-invasive Brillouin light scattering technique and finite element calculations. The resolved elastic vibrational modes in high and low aspect ratio nanowalls reveal quantitative and qualitative differences related to the two-beam interference lithography fabrication and subsequent aging under ambient conditions. The phononic properties, namely the dispersion relations, can be drastically altered by changing the surrounding material of the nanowalls. Here we demonstrate that liquid infiltration turns the phononic function from a single-direction phonon-guiding to an anisotropic propagation along the two orthogonal directions. The susceptibility of the phononic behavior to the infiltrating liquid can be of unusual benefits, such as sensing and alteration of the materials under confinement., E. A. R. and G. F. thank D. Schneider for his support in the initial stage of the BLS study and acknowledge the support from ERC SuPro 340391 and ERC SmartPhon 694977, respectively. S. Y. acknowledges the support by the National Science Foundation (NSF), Grant #CMMI-0900468. B. G. and C. M. S. T. gratefully acknowledge support from the EC project MERGING (GA nr. 309150), the Spanish project PHENTOM (FIS2015-70862P) and the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). B. G. acknowledges the Alexander von Humboldt foundation for support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

2D Phononic crystals: Progress and prospects in hypersound and thermal transport engineering

  • Sledzinska, Marianna
  • Graczykowski, Bartlomiej
  • Maire, Jeremie
  • Chávez-Angel, Emigdio
  • Sotomayor Torres, C. M.
  • Alzina, Francesc
The central concept in phononics is the tuning of the phonon dispersion relation, or phonon engineering, which provides a means of controlling related properties such as group velocity or phonon interactions and, therefore, phonon propagation, in a wide range of frequencies depending on the geometries and sizes of the materials. Phononics exploits the present state of the art in nanofabrication to tailor dispersion relations in the range of GHz for the control of elastic waves/phonons propagation with applications toward new information technology concepts with phonons as state variable. Moreover, phonons provide an adaptable approach for supporting a coherent coupling between different state variables, and the development of nanoscale optomechanical systems during the last decade attests this prospect. The most extended approach to manipulate the phonon dispersion relation is introducing an artificial periodic modulation of the elastic properties, which is referred to as phononic crystal (PnC). Herein, the focus is on the recent experimental achievements in the fabrication and application of 2D PnCs enabling the modification of the dispersion relation of surface and membrane modes, and presenting phononic bandgaps, waveguiding, and confinement in the hypersonic regime. Furthermore, these artificial materials offer the potential of modifying and controlling the heat flow to enable new schemes in thermal management., ICN2 is supported by the Spanish MINECO (Severo Ochoa Centers of Excellence Program under Grant SEV‐2017‐0706), and by the Generalitat de Catalunya (Grant 2017SGR806 and the CERCA Program). B.G. acknowledges the support from the Foundation for Polish Science (POIR.04.04.00‐00‐5D1B/18), Polish National Science Centre (UMO‐2018/31/D/ST3/03882), and ERC AdG SmartPhon (Grant No. 694977)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal conductivity in disordered porous nanomembranes

  • Sledzinska, Marianna
  • Graczykowski, Bartlomiej
  • Alzina, Francesc
  • Melia, Umberto
  • Termentzidis, Konstantinos
  • Lacroix, David
  • Sotomayor Torres, C. M.
In this work we study the effects of disorder on the thermal conductivity of porous 100 nm thick silicon membranes, in which the size, shape and position of the pores were varied randomly. Measurements using two-laser Raman thermometry on both non-patterned and porous membranes revealed more than a 10-fold reduction of the thermal conductivity compared to that of bulk silicon and a six-fold reduction compared to non-patterned membranes for the sample with random pore shapes. Using Monte Carlo methods we solved the Boltzmann transport equation for phonons and compared different possibilities of pore organization and its influence on the thermal conductivity of the samples. The simulations confirmed that the strongest reduction of thermal conductivity is achieved for a distribution of pores with arbitrary shapes that partially overlap. Up to a 15% reduction of the thermal conductivity with respect to the purely circular pores was predicted for a porous membrane with 37% filling fraction. The effect of the pore shape and distribution was further studied. Maps of temperature and heat flux distributions clearly showed that for particular pore placement heat transport can be efficiently blocked and hot spots can be found in narrow channels between pores. These findings have an impact on the fabrication of membrane-based thermoelectric devices, where low thermal conductivity is required. This work shows that for porous membranes with a given filling fraction the thermal conductivity can be further modified by introducing disorder in the shape and placement of the pores., The ICN2 is funded by the CERCA program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). We acknowledge the financial support from the Spanish MINECO project PHENTOM (FIS2015-70862-P). We acknowledge the financial support from the French ANR with the project MESOPHON (ANR-15-CE30-0019). BG acknowledges the support from the Foundation for Polish Science (Homing/ 2016-1/2 and First Team POIR.04.04.00-00-5D1B/18-00) and ERC AdG SmartPhon (Grant No. 694977)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Shell architecture strongly influences the glass transition, surface mobility, and elasticity of polymer core-shell Nanoparticles

  • Kang, Eunsoo
  • Graczykowski, Bartlomiej
  • Jonas, U.
  • Christie, Dane
  • Gray, Laura A. G.
  • Cangialosi, Daniele
  • Priestley, Rodney D.
  • Fytas, George
Despite the growing application of nanostructured polymeric materials, there still remains a large gap in our understanding of polymer mechanics and thermal stability under confinement and near polymer-polymer interfaces. In particular, the knowledge of polymer nanoparticle thermal stability and mechanics is of great importance for their application in drug delivery, phononics, and photonics. Here, we quantified the effects of a polymer shell layer on the modulus and glass-transition temperature (T) of polymer core-shell nanoparticles via Brillouin light spectroscopy and modulated differential scanning calorimetry, respectively. Nanoparticles consisting of a polystyrene (PS) core and shell layers of poly(n-butyl methacrylate) (PBMA) were characterized as model systems. We found that the high T of the PS core was largely unaffected by the presence of an outer polymer shell, whereas the lower T of the PBMA shell layer decreased with increasing PBMA thickness. The surface mobility was revealed at a temperature about 15 K lower than the T of the PBMA shell layer. Overall, the modulus of the core-shell nanoparticles decreased with increasing PBMA shell layer thickness. These results suggest that the nanoparticle modulus and T can be tuned independently through the control of nanoparticle composition and architecture., E.K., B.G., and G.F. acknowledge the financial support by ERC Advanced Grant Smartphon (No. 694977). B.G. acknowledges the support from the First Team project (POIR.04.04.00-00- 5D1B/18-00) granted by the Foundation for Polish Science. R.D.P. acknowledges the support of the National Science Foundation (NSF) Materials Research Science and Engineering Center Program through the Princeton Center for Complex Materials (DMR-1420541) and NSF CBET1706012. D.C. acknowledges financial support from the Basque Government (Grant No. IT-1175-19).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct visualization and characterization of interfacially adsorbed polymer atop nanoparticles and within nanocomposites

  • Randazzo, Katelyn
  • Bartkiewicz, Malgorzata
  • Graczykowski, Bartlomiej
  • Cangialosi, Daniele
  • Fytas, George
  • Zuo, Biao
  • Priestley, Rodney D.
Irreversible adsorption at polymer/substrate interfaces has been reported to influence glassy properties in thin films. However, consideration has yet to be extended to the nanocomposite geometry, wherein a large interfacial area and high processing temperatures afford especially favorable conditions for irreversible adsorption at the polymer/nanoparticle interface. Here, we present an approach for directly measuring the site-specific glassy properties at the polystyrene (PS)-adsorbed layer interface in PS–silica nanocomposites. We achieved this using a stepwise assembly approach to localize fluorescent dyes within the nanocomposite adsorbed layer, subsequently measuring the glass transition temperature (Tg) via fluorescence. We found that PS adsorption within nanocomposites strongly influenced the local Tg. By measuring the thickness of the PS-adsorbed layers atop nanoparticles via transmission electron microscopy, we found a correlation between adsorbed layer Tg and thickness. Our results provide compelling evidence that adsorbed layer formation within polymer nanocomposites can have a profound impact on local interfacial properties., The authors acknowledge the use of Princeton’s Imaging and Analysis Center, which is partially supported by the Princeton Center for Complex Materials, a National Science Foundation (NSF)-MRSEC program (DMR-2011750). K.R. acknowledges the support of the National Science Foundation Graduate Research Fellowship Program under grant no. DCE-1656466. M.B. and G.F. acknowledge the financial support from ERC AdG SmartPhon (grant no. 694977). M.B. and G.F. acknowledge the financial support of the Foundation for Polish Science (POIR.04.04.00-00-5D1B/18). B.Z. acknowledges the financial support from the Natural Science Foundation of China (grant nos. 22122306, 21973083, and 22011530456)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optomechanical Crystals for Spatial Sensing of Submicron Sized Particles

  • Navarro Urrios, Daniel
  • Kang, E.
  • Xiao, P.
  • Colombano, Martín F.
  • Arregui, Guillermo
  • Graczykowski, B.
  • Capuj, Néstor E.
  • Sledzinska, M.
  • Sotomayor Torres, Clivia M.
  • Fytas, G.
Optomechanical crystal cavities (OMC) have rich perspectives for detecting and indirectly analysing biological particles, such as proteins, bacteria and viruses. In this work we demonstrate the working principle of OMCs operating under ambient conditions as a sensor of submicrometer particles by optically monitoring the frequency shift of thermally activated mechanical modes. The resonator has been specifcally designed so that the cavity region supports a particular family of low modal-volume mechanical modes, commonly known as -pinch modes-. These involve the oscillation of only a couple of adjacent cavity cells that are relatively insensitive to perturbations in other parts of the resonator. The eigenfrequency of these modes decreases as the deformation is localized closer to the centre of the resonator. Thus, by identifying specifc modes that undergo a frequency shift that amply exceeds the mechanical linewidth, it is possible to infer if there are particles deposited on the resonator, how many are there and their approximate position within the cavity region. OMCs have rich perspectives for detecting and indirectly analysing biological particles, such as proteins, viruses and bacteria.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Thermal conductivity in disordered porous nanomembranes

  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Graczykowski, Bartlomiej|||0000-0003-4787-8622
  • Alzina, Francesc|||0000-0002-7082-0624
  • Melia, Umberto|||0000-0003-3033-0505
  • Termentzidis, Konstantinos|||0000-0002-8521-7107
  • Lacroix, David|||0000-0001-6067-8524
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
In this work we study the effects of disorder on the thermal conductivity of porous 100 nm thick silicon membranes, in which the size, shape and position of the pores were varied randomly. Measurements using two-laser Raman thermometry on both non-patterned and porous membranes revealed more than a 10-fold reduction of the thermal conductivity compared to that of bulk silicon and a six-fold reduction compared to non-patterned membranes for the sample with random pore shapes. Using Monte Carlo methods we solved the Boltzmann transport equation for phonons and compared different possibilities of pore organization and its influence on the thermal conductivity of the samples. The simulations confirmed that the strongest reduction of thermal conductivity is achieved for a distribution of pores with arbitrary shapes that partially overlap. Up to a 15% reduction of the thermal conductivity with respect to the purely circular pores was predicted for a porous membrane with 37% filling fraction. The effect of the pore shape and distribution was further studied. Maps of temperature and heat flux distributions clearly showed that for particular pore placement heat transport can be efficiently blocked and hot spots can be found in narrow channels between pores. These findings have an impact on the fabrication of membrane-based thermoelectric devices, where low thermal conductivity is required. This work shows that for porous membranes with a given filling fraction the thermal conductivity can be further modified by introducing disorder in the shape and placement of the pores.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

2D Phononic Crystals, Progress and Prospects in Hypersound and Thermal Transport Engineering

  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Graczykowski, Bartlomiej|||0000-0003-4787-8622
  • Maire, Jeremie|||0000-0002-9921-4804
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Alzina, Francesc|||0000-0002-7082-0624
The central concept in phononics is the tuning of the phonon dispersion relation, or phonon engineering, which provides a means of controlling related properties such as group velocity or phonon interactions and, therefore, phonon propagation, in a wide range of frequencies depending on the geometries and sizes of the materials. Phononics exploits the present state of the art in nanofabrication to tailor dispersion relations in the range of GHz for the control of elastic waves/phonons propagation with applications toward new information technology concepts with phonons as state variable. Moreover, phonons provide an adaptable approach for supporting a coherent coupling between different state variables, and the development of nanoscale optomechanical systems during the last decade attests this prospect. The most extended approach to manipulate the phonon dispersion relation is introducing an artificial periodic modulation of the elastic properties, which is referred to as phononic crystal (PnC). Herein, the focus is on the recent experimental achievements in the fabrication and application of 2D PnCs enabling the modification of the dispersion relation of surface and membrane modes, and presenting phononic bandgaps, waveguiding, and confinement in the hypersonic regime. Furthermore, these artificial materials offer the potential of modifying and controlling the heat flow to enable new schemes in thermal management.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optomechanical crystals for spatial sensing of submicron sized particles

  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Kang, E.
  • Xiao, Peng|||0000-0002-4711-2566
  • Colombano Sosa, Martin|||0000-0002-2003-8597
  • Arregui Bravo, Guillermo|||0000-0002-6458-5277
  • Graczykowski, Bartlomiej|||0000-0003-4787-8622
  • Capuj, Nestor Eduardo|||0000-0002-9042-2041
  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Fytas, Georgios|||0000-0001-5984-5057
Optomechanical crystal cavities (OMC) have rich perspectives for detecting and indirectly analysing biological particles, such as proteins, bacteria and viruses. In this work we demonstrate the working principle of OMCs operating under ambient conditions as a sensor of submicrometer particles by optically monitoring the frequency shift of thermally activated mechanical modes. The resonator has been specifically designed so that the cavity region supports a particular family of low modal-volume mechanical modes, commonly known as -pinch modes-. These involve the oscillation of only a couple of adjacent cavity cells that are relatively insensitive to perturbations in other parts of the resonator. The eigenfrequency of these modes decreases as the deformation is localized closer to the centre of the resonator. Thus, by identifying specific modes that undergo a frequency shift that amply exceeds the mechanical linewidth, it is possible to infer if there are particles deposited on the resonator, how many are there and their approximate position within the cavity region. OMCs have rich perspectives for detecting and indirectly analysing biological particles, such as proteins, viruses and bacteria.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Directional elastic wave propagation in high-aspect-ratio photoresist gratings, Liquid infiltration and aging

  • Alonso-Redondo, Elena
  • Gueddida, Abdellatif
  • Li, Ju|||0000-0002-7841-8058
  • Graczykowski, Bartlomiej|||0000-0003-4787-8622
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Pennec, Yan|||0000-0002-4719-9913
  • Yang, Shu
  • Djafari-Rouhani, Bahram|||0000-0001-6983-9689
  • Fytas, Georgios|||0000-0001-5984-5057
Determination of the mechanical properties of nanostructured soft materials and their composites in a quantitative manner is of great importance to improve the fidelity in their fabrication and to enable the subsequent reliable utility. Here, we report on the characterization of the elastic and photoelastic parameters of a periodic array of nanowalls (grating) by the non-invasive Brillouin light scattering technique and finite element calculations. The resolved elastic vibrational modes in high and low aspect ratio nanowalls reveal quantitative and qualitative differences related to the two-beam interference lithography fabrication and subsequent aging under ambient conditions. The phononic properties, namely the dispersion relations, can be drastically altered by changing the surrounding material of the nanowalls. Here we demonstrate that liquid infiltration turns the phononic function from a single-direction phonon-guiding to an anisotropic propagation along the two orthogonal directions. The susceptibility of the phononic behavior to the infiltrating liquid can be of unusual benefits, such as sensing and alteration of the materials under confinement.