Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Automatic Mapping of Discontinuity Persistence on Rock Masses Using 3D Point Clouds

  • Riquelme, Adrián
  • Tomás, Roberto
  • Cano, Miguel
  • Pastor Navarro, José Luis
  • Abellán Fernández, Antonio
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Finding new ways to quantify discontinuity persistence values in rock masses in an automatic or semi-automatic manner is a considerable challenge, as an alternative to the use of traditional methods based on measuring patches or traces with tapes. Remote sensing techniques potentially provide new ways of analysing visible data from the rock mass. This work presents a methodology for the automatic mapping of discontinuity persistence on rock masses, using 3D point clouds. The method proposed herein starts by clustering points that belong to patches of a given discontinuity. Coplanar clusters are then merged into a single group of points. Persistence is measured in the directions of the dip and strike for each coplanar set of points, resulting in the extraction of the length of the maximum chord and the area of the convex hull. The proposed approach is implemented in a graphic interface with open source software. Three case studies are utilized to illustrate the methodology: (1) small-scale laboratory setup consisting of a regular distribution of cubes with similar dimensions, (2) more complex geometry consisting of a real rock mass surface in an excavated cavern and (3) slope with persistent sub-vertical discontinuities. Results presented good agreement with field measurements, validating the methodology. Complexities and difficulties related to the method (e.g., natural discontinuity waviness) are reported and discussed. An assessment on the applicability of the method to the 3D point cloud is also presented. Utilization of remote sensing data for a more objective characterization of the persistence of planar discontinuities affecting rock masses is highlighted herein.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A multidisciplinary approach for the investigation of a rock spreading on an urban slope

  • Tomás, Roberto
  • Abellán Fernández, Antonio
  • Cano, Miguel
  • Riquelme, Adrián
  • Tenza-Abril, Antonio José
  • Baeza Brotons, Francisco
  • Saval Pérez, José Miguel
  • Jaboyedoff, Michel
  • Baeza Brotons, Francisco|||/items/aa91de7e-5d8e-413e-8d6a-87443b4dfe2e
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Saval Pérez, José Miguel|||/items/e08c30d7-7578-4b2e-8eb9-eebf974dd3dd
  • Tenza-Abril, Antonio José|||/items/07e0951f-fcaa-4f60-8f86-1d0ce5ca3f30
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Landslides are very complex processes controlled by multiple factors. The knowledge and characterization of these factors is essential for a comprehensive understanding of the mechanisms and kinematics of the instabilities and for an efficient design of corrective measures. The aim of this work is to combine traditional geological and geotechnical techniques with geophysical, remote sensing and forensic techniques for obtaining a whole picture of an active lateral spreading affecting the Finestrat municipality in Alicante, SE Spain. Geomorphological, geotechnical and geophysical techniques (i.e. ground penetrating radar and refraction seismic) have provided essential information about the geometry, structure and petro-physical properties of the slope. A Terrestrial Laser Scanner was used for recognizing the most important sets of discontinuities affecting the rock mass and to evaluate the activity of the landslide slope. Complementarily, a forensic analysis of the building damage completed the available datasets, yielding very useful kinematic information of the landslide. Finally, a sensitivity analysis of the stability of the rock slope has been performed considering both block toppling and block sliding models. Therefore, the multisource analysis performed in this work has allowed the identification and characterization of a complex lateral spreading, highlighting its effectiveness for a comprehensive understanding of this type of landslide.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Multi-epoch and Multi-Imagery (MEMI) Photogrammetric Workflow for Enhanced Change Detection Using Time-Lapse Cameras

  • Blanch Gorriz, Xabier
  • Eltner, Anette
  • Guinau Sellés, Marta
  • Abellán Fernández, Antonio
Photogrammetric models have become a standard tool for the study of surfaces, structures and natural elements. As an alternative to Light Detection and Ranging (LiDAR), photogrammetry allows 3D point clouds to be obtained at a much lower cost. This paper presents an enhanced workflow for image-based 3D reconstruction of high-resolution models designed to work with fixed time-lapse camera systems, based on multi-epoch multi-images (MEMI) to exploit redun-dancy. This workflow is part of a fully automatic working setup that includes all steps: from capturing the images to obtaining clusters from change detection. The workflow is capable of obtaining photogrammetric models with a higher quality than the classic Structure from Motion (SfM) time-lapse photogrammetry workflow. The MEMI workflow resulted in a 50% improve-ment in accuracy when compared to the previous approach, allowing for M3C2 standard devia-tion of 1.5 cm. In terms of absolute accuracy, using LiDAR data as a reference, our proposed method is 20% more accurate than models obtained with the classic workflow. The automation of the method as well as the improvement of the quality of the 3D reconstructed models enables accurate 4D photogrammetric analysis in near-real time.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multi-epoch and Multi-Imagery (MEMI) Photogrammetric Workflow for Enhanced Change Detection Using Time-Lapse Cameras

  • Blanch Gorriz, Xabier
  • Eltner, Anette
  • Guinau Sellés, Marta
  • Abellán Fernández, Antonio
Photogrammetric models have become a standard tool for the study of surfaces, structures and natural elements. As an alternative to Light Detection and Ranging (LiDAR), photogrammetry allows 3D point clouds to be obtained at a much lower cost. This paper presents an enhanced workflow for image-based 3D reconstruction of high-resolution models designed to work with fixed time-lapse camera systems, based on multi-epoch multi-images (MEMI) to exploit redun-dancy. This workflow is part of a fully automatic working setup that includes all steps: from capturing the images to obtaining clusters from change detection. The workflow is capable of obtaining photogrammetric models with a higher quality than the classic Structure from Motion (SfM) time-lapse photogrammetry workflow. The MEMI workflow resulted in a 50% improve-ment in accuracy when compared to the previous approach, allowing for M3C2 standard devia-tion of 1.5 cm. In terms of absolute accuracy, using LiDAR data as a reference, our proposed method is 20% more accurate than models obtained with the classic workflow. The automation of the method as well as the improvement of the quality of the 3D reconstructed models enables accurate 4D photogrammetric analysis in near-real time.