Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preparation and Characterization of Electrospun Food Biopackaging Films of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Derived From Fruit Pulp Biowaste

  • Meléndez-Rodríguez, Beatriz
  • Castro-Mayorga, Jinneth L.
  • Reis, Maria A. M.
  • Sammon, Chris
  • Cabedo, Luis
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In the present study, circular economy based and potentially low-cost poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was produced by mixed microbial cultures derived from fruit pulp, an industrial by-product of the juice industry. Three different chemical routes, namely non-extraction, extraction with sodium hypochlorite (NaClO), and extraction with chloroform, in combination with ¿ltering and centrifugation, were explored to purify the biopolymer and ¿nd the most optimal solution for its processing via electrospinning. The resultant ultrathin ¿ber mats of the different extracted PHBV materials were thermally post-processed at different temperatures in order to obtain continuous ¿lms adequate for food packaging applications. The resultant ¿lms were characterized in terms of morphology, crystallinity as well as thermal, mechanical, and barrier properties. The results showed that extraction with both chloroform and NaClO with a post-treatment of ¿ltering and centrifugation of the PHBV-containing biomass were necessary re¿ning steps to allow its processing by electrospinning. In particular, the PHBV extracted with chloroform presented the highest degree of purity, resulting in more transparent ¿lms with lower wettability and higher ¿exibility. The here-formulated electrospun ¿lms made of biomass derived from biowaste exhibit great potential as interlayers or coatings for food biopackaging applications., The authors would like to thank the Unidad Asociada IATAUJI Plastics Technology and the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R and the H2020 EU projects YPACK (reference number 773872) and RES URBIS (reference number 730349) for funding. BM-R and ST-G would also like to thank the MINECO s FPI (BES2016-077972) and Juan de la Cierva (IJCI-2016-29675) programs, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxygen-Scavenging Multilayered Biopapers Containing Palladium Nanoparticles Obtained by the Electrospinning Coating Technique

  • Cherpinski, Adriane
  • Szewczyk, Piotr K.
  • Gruszczynski, Adam
  • Stachewicz, Urszula
  • Lagaron, Jose M.
[EN] The main goal of this study was to obtain, for the first time, highly efficient water barrier and oxygen-scavenging multilayered electrospun biopaper coatings of biodegradable polymers over conventional cellulose paper, using the electrospinning coating technique. In order to do so, poly(3-hydroxybutyrate) (PHB) and polycaprolactone (PCL) polymer-containing palladium nanoparticles (PdNPs) were electrospun over paper, and the morphology, thermal properties, water vapor barrier, and oxygen absorption properties of nanocomposites and multilayers were investigated. In order to reduce the porosity, and to enhance the barrier properties and interlayer adhesion, the biopapers were annealed after electrospinning. A previous study showed that electrospun PHB-containing PdNP did show significant oxygen scavenging capacity, but this was strongly reduced after annealing, a process that is necessary to form a continuous film with the water barrier. The results in the current work indicate that the PdNP were better dispersed and distributed in the PCL matrix, as suggested by focus ion beam-scanning electron microscopy (FIB-SEM) experiments, and that the Pd enhanced, to some extent, the onset of PCL degradation. More importantly, the PCL/PdNP nanobiopaper exhibited much higher oxygen scavenging capacity than the homologous PHB/PdNP, due to most likely, the higher oxygen permeability of the PCL polymer and the somewhat higher dispersion of the Pd. The passive and active multilayered biopapers developed here may be of significant relevance to put forward the next generation of fully biodegradable barrier papers of interest in, for instance, food packaging., This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R, the H2020 EU YPACK (reference number 773872) and ResUrbis (Reference number 730349). A. Cherpinski would like to thank the Brazilian Council for Scientific and Technological Development (CNPq) of the Brazilian Government for her predoctoral grant (205955/2014-2). U. Stachewicz thanks the National Science Centre in Poland for the Sonata Bis 5 project, No 2015/18/E/ST5/00230 allowing this study, and a PhD scholarship for P.K. Szewczyk.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reactive Melt Mixing of Poly(3-Hydroxybutyrate)/Rice Husk Flour Composites with Purified Biosustainably Produced Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)

  • Meléndez-Rodríguez, Beatriz
  • Aldureid, Abdulaziz
  • Cabedo, Luis
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Novel green composites based on commercial poly(3-hydroxybutyrate) (PHB) filled with 10 wt % rice husk flour (RHF) were melt-compounded in a mini-mixer unit using triglycidyl isocyanurate (TGIC) as compatibilizer and dicumyl peroxide (DCP) as initiator. Purified poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) produced by mixed bacterial cultures derived from fruit pulp waste was then incorporated into the green composite in contents in the 5-50 wt % range. Films for testing were obtained thereafter by thermo-compression and characterized. Results showed that the incorporation of up to 20 wt % of biowaste derived PHBV yielded green composite films with a high contact transparency, relatively low crystallinity, high thermal stability, improved mechanical ductility, and medium barrier performance to water vapor and aroma. This study puts forth the potential use of purified biosustainably produced PHBV as a cost-effective additive to develop more affordable and waste valorized food packaging articles., This research was supported by the Spanish Ministry of Science, Innovation, and Universities (MICIU) program number AGL2015-63855-C2-1-R and by the EU H2020 projects YPACK (reference number 773872) and ResUrbis (reference number 730349). B.M.-R. and S.T.-G. acknowledge MICIU for her FPI grant (BES-2016-077972) and his Juan de la Cierva-Incorporación contract (IJCI-2016-29675), respectively. The authors also thank the Joint Unit in Polymers Technology between IATA¿CSIC and PIMA-Universitat Jaume I.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrospun Antimicrobial Films of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Containing Eugenol Essential Oil Encapsulated in Mesoporous Silica Nanoparticles

  • Meléndez-Rodríguez, Beatriz
  • Figueroa-López, Kelly Johana
  • CABEDO MAS, LUIS
  • LAGARON CABELLO, JOSE MARIA
  • Bernardos Bau, Andrea|||0000-0002-3842-5771
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] The main goal of this study was to develop poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) films with long-term antimicrobial capacity of interest in food packaging applications. To this end, eugenol was first highly efficiently encapsulated at 50 wt.-% in the pores of mesoporous silica nanoparticles by vapor adsorption. The eugenol-containing nanoparticles were then loaded in the 2.5-20 wt.-% range into PHBV by electrospinning and the resultant electrospun composite fibers were annealed at 155 degrees C to produce continuous films. The characterization showed that the PHBV films filled with mesoporous silica nanoparticles containing eugenol present sufficient thermal resistance and enhanced mechanical strength and barrier performance to water vapor and limonene. The antimicrobial activity of the films was also evaluated against foodborne bacteria for 15 days in open vs. closed conditions in order to simulate real packaging conditions. The electrospun PHBV films with loadings above 10 wt.-% of mesoporous silica nanoparticles containing eugenol successfully inhibited the bacterial growth, whereas the active films stored in hermetically closed systems increased their antimicrobial activity after 15 days due to the volatile portion accumulated in the system's headspace and the sustained release capacity of the films. The resultant biopolymer films are, therefore, potential candidates to be applied in active food packaging applications to provide shelf life extension and food safety., This research was supported by the Ministry of Science, Innovation, and Universities (MICIU) program numbers AGL2015-63855-C2-1-R and MAT2015-64139-C4-1-R, by the Generalitat Valenciana (GVA) PROMETEO/2018/024 program, and by the EU H2020 projects YPACK (reference number 773872) and ResUrbis (reference number 730349). B.M.-R. and S.T.-G. acknowledge MICIU for her FPI grant (BES-2016-077972) and his Juan de la Cierva - Incorporación contract (IJCI-2016-29675), respectively. K.J.F-L. also acknowledges GVA for her Santiago Grisolia grant (GRISOLIAP/2017/101). A.B. would also like to thank GVA (POSTD/2014/016) and MICIU for her Juan de la Cierva - Incorporación contract (IJCI-2014-21534). The authors also thank the Joint Unit in Polymers Technology between IATA¿CSIC and PIMA-Universitat Jaume I.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Enhancement of volatile fatty acids production from food waste by mature compost addition

  • Cheah, Yen Keong
  • Dosta Parras, Joan
  • Mata Álvarez, Joan
Food waste (FW) collected from a university canteen was treated in acidogenic fermenters to produce volatile fatty acids (VFA) under biological pretreatment with mature compost. Batch assays working at pH 6 revealed an increment of 9.0%, 7.9%, and 4.1% (on COD basis) of VFA concentration when adding 2.5%, 3.5%, and 4.5% w/w of mature compost, respectively, even though the volatile solids (VS) concentration of food waste was lower in the tests with increasing doses of mature compost. For batch tests at pH 7, this VFA generation improvement was lower, even though enhanced COD solubilization was recorded. Operating in semi-continuous conditions at 35 ºC, pH of 6, and hydraulic retention time (HRT) of 3.5 days, the addition of 2.5% w/w of mature compost led to a VFA concentration up to 51.2 ± 12.3% more (on VS basis) when compared to a reference reactor without compost addition. Moreover, the percentage of butyric acid on VS basis in the fermentation broth working at a pH of 6 increased from up to 12.2 ± 1.9% (0% compost addition) to up to 23.5 ± 2.7% (2.5% compost addition). The VFA production was not improved when a higher percentage of mature compost was used (3.5% instead of 2.5% w/w), and it slightly decreased when mature compost addition was lowered to 1.5% w/w. When working at a pH of 7 in the semi-continuous fermenters with the addition of 2.5% w/w mature compost at an HRT of 3.5 days, an improvement of 79% and 104% of the VFA concentration (on VS basis) were recorded as compared to fermenters working at a pH of 6 with 2.5% and 0% w/w of mature compost addition, respectively. At a pH of 7, higher production of propionic and valeric acids was found with respect to the reactor working at a pH of 6. The effect of pH on VFA generation was estimated to have greater contribution than that of only biological pretreatment using mature compost. At a pH of 7, the VFA yield was higher for the fermenter working with 2.5% w/w mature compost but at a pH of 7 and HRT of 5 days, the effect of mature compost on VFA production improvement was lower than that obtained at a pH of 6. Moreover, higher solubilization in terms of soluble chemical oxygen demand and total ammonium was detected when biological pretreatment using mature compost was applied at both a pH of 6 and a pH of 7, which indicates enhanced hydrolysis in both conditions.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Exploring the potential of co-fermenting sewage sludge and lipids in a resource recovery scenario

  • Peces, Miriam
  • Pozo, Guillermo
  • Koch, Konrad
  • Dosta Parras, Joan
  • Astals Garcia, Sergi
In this study, co-fermentation of primary sludge (PS) or waste activated sludge (WAS) with lipids was explored to improve volatile fatty acid production. PS and WAS were used as base substrate to facilitate lipid fermentation at 20 °C under semi-aerobic conditions. Mono-fermentation tests showed higher VFA yields for PS (32-89 mgCOD gVS-1) than for WAS (20-41 mgCOD gVS-1) where propionate production was favoured. The principal component analysis showed that the base substrate had a notable influence on co-fermentation yields and profile. Co-fermentation with WAS resulted in a greater extent of oleic acid degradation (up to 4.7%) and evidence of chain elongation producing valerate. The occurrence of chain elongation suggests that co-fermentation can be engineered to favour medium-chain fatty acids without the addition of external commodity chemicals. BMP tests showed that neither mono-fermentation nor co-fermentation had an impact on downstream anaerobic digestion.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Volatile fatty acid production from mesophilic acidogenic fermentation of organic fraction of municipal solid waste and food waste under acidic and alkaline pH

  • Cheah, Yen Keong
  • Vidal Antich, Carme
  • Dosta, Joan
  • Mata Álvarez, Joan
This study is focused on the effects of pH on the production of volatile fatty acids (VFAs) and their distribution through the acidogenic fermentation of source-sorted organic fraction of municipal solid waste (OFMSW) from a mechanical-biological treatment (MBT) plant, and food waste (FW) from a university canteen. In semi-continuous lab-scale digesters using OFMSW at a hydraulic retention time (HRT) of 3.5 days under acidic conditions (pH 6.0), the VFA concentration in the effluent increased to 9.8-11.5 g L−1 (VS content of the feedstock between 4.2 and 5.2% w/w), while its individual VFA profiling was similar to the influent which was already prefermented (namely, C2 35-41%, C3 18-22%, C4 17-21%, and C5 9-12%). When working with the same conditions but using FW as feedstock, an effluent with a VFA concentration up to 11.5 g VFA L−1 (FW with a VS content of 5.5% w/w) and a stable distribution of C2 and C4 acids (up to 60.3% and 12.9%, respectively) but with very low quantities of C3 and C5 acids (lower than 1.8 and 2.7%, respectively) was obtained. Anaerobic batch tests using FW revealed that alkaline pH near 9 could lead to higher VFA production with high acetic acid content when compared to pH 6. In the semi-continuous fermenters working at alkaline conditions (pH 9.5-10) using OFMSW and FW, an enhanced solubilization of organic matter was registered with respect to the fermenters working under acidic conditions. This fact was not reflected in a higher VFA production when using OFMSW as feedstock, probably due to free ammonia inhibition, since OFMSW was mixed in the MBT plant with supernatant from anaerobic digestion of this biowaste. However, when using FW, alkaline conditions lead to an enhanced VFA production with respect to the reactor working under acidic conditions, being acetic acid the predominant product, which represented up to 91% of the VFA spectrum obtained.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrospun antimicrobial films of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) containing eugenol essential oil encapsulated in mesoporous silica nanoparticles

  • Meléndez-Rodríguez, Beatriz
  • Figueroa-Lopez, Kelly J.
  • Bernardos, Andrea
  • Martínez-Máñez, Ramón
  • Cabedo, Luis
  • Torres-Giner, Sergio
  • Lagarón Cabello, José María
The main goal of this study was to develop poly(3-hydroxybutyrate-<i>co</i>-3-hydroxyvalerate) (PHBV) films with long-term antimicrobial capacity of interest in food packaging applications. To this end, eugenol was first highly efficiently encapsulated at 50 wt.-% in the pores of mesoporous silica nanoparticles by vapor adsorption. The eugenol-containing nanoparticles were then loaded in the 2.5–20 wt.-% range into PHBV by electrospinning and the resultant electrospun composite fibers were annealed at 155 °C to produce continuous films. The characterization showed that the PHBV films filled with mesoporous silica nanoparticles containing eugenol present sufficient thermal resistance and enhanced mechanical strength and barrier performance to water vapor and limonene. The antimicrobial activity of the films was also evaluated against foodborne bacteria for 15 days in open vs. closed conditions in order to simulate real packaging conditions. The electrospun PHBV films with loadings above 10 wt.-% of mesoporous silica nanoparticles containing eugenol successfully inhibited the bacterial growth, whereas the active films stored in hermetically closed systems increased their antimicrobial activity after 15 days due to the volatile portion accumulated in the system’s headspace and the sustained release capacity of the films. The resultant biopolymer films are, therefore, potential candidates to be applied in active food packaging applications to provide shelf life extension and food safety., This research was supported by the Ministry of Science, Innovation, and Universities (MICIU) program numbers AGL2015-63855-C2-1-R and MAT2015-64139-C4-1-R, by the Generalitat Valenciana (GVA) PROMETEO/2018/024 program, and by the EU H2020 projects YPACK (reference number 773872) and ResUrbis (reference number 730349)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxygen-Scavenging Multilayered Biopapers Containing Palladium Nanoparticles Obtained by the Electrospinning Coating Technique

  • Cherpinski, Adriane
  • Szewczyk, Piotr K.
  • Gruszczyński, Adam
  • Stachewicz, Urszula
  • Lagarón Cabello, José María
The main goal of this study was to obtain, for the first time, highly efficient water barrier and oxygen-scavenging multilayered electrospun biopaper coatings of biodegradable polymers over conventional cellulose paper, using the electrospinning coating technique. In order to do so, poly(3-hydroxybutyrate) (PHB) and polycaprolactone (PCL) polymer-containing palladium nanoparticles (PdNPs) were electrospun over paper, and the morphology, thermal properties, water vapor barrier, and oxygen absorption properties of nanocomposites and multilayers were investigated. In order to reduce the porosity, and to enhance the barrier properties and interlayer adhesion, the biopapers were annealed after electrospinning. A previous study showed that electrospun PHB-containing PdNP did show significant oxygen scavenging capacity, but this was strongly reduced after annealing, a process that is necessary to form a continuous film with the water barrier. The results in the current work indicate that the PdNP were better dispersed and distributed in the PCL matrix, as suggested by focus ion beam-scanning electron microscopy (FIB-SEM) experiments, and that the Pd enhanced, to some extent, the onset of PCL degradation. More importantly, the PCL/PdNP nanobiopaper exhibited much higher oxygen scavenging capacity than the homologous PHB/PdNP, due to most likely, the higher oxygen permeability of the PCL polymer and the somewhat higher dispersion of the Pd. The passive and active multilayered biopapers developed here may be of significant relevance to put forward the next generation of fully biodegradable barrier papers of interest in, for instance, food packaging., This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R, the H2020 EU YPACK (reference number 773872) and ResUrbis (Reference number 730349), We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physicochemical, Antioxidant and Antimicrobial Properties of Electrospun Poly(ε-caprolactone) Films Containing a Solid Dispersion of Sage (Salvia officinalis L.) Extract

  • Salević, Ana
  • Prieto López, Cristina
  • Cabedo, Luis
  • Nedović, Viktor
  • Lagarón Cabello, José María
In this study, novel active films made of poly(ε-caprolactone) (PCL) containing a solid dispersion of sage extract (SE) were developed by means of the electrospinning technique and subsequent annealing treatment. Initially, the antioxidant and antimicrobial potential of SE was confirmed. Thereafter, the effect of SE incorporation at different loading contents (5%, 10%, and 20%) on the physicochemical and functional properties of the films was evaluated. The films were characterized in terms of morphology, transparency, water contact angle, thermal stability, tensile properties, water vapor, and aroma barrier performances, as well as antioxidant and antimicrobial activities. Thin, hydrophobic films with good contact transparency were produced by annealing of the ultrathin electrospun fibers. Interestingly, the effect of SE addition on tensile properties and thermal stability of the films was negligible. In general, the water vapor and aroma permeability of the PCL-based films increased by adding SE to the polymer. Nevertheless, a strong 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging ability, and a strong activity against foodborne pathogens Staphylococcus aureus and Escherichia coli were achieved by SE incorporation into PCL matrix. Overall, the obtained results suggest great potential of the here-developed PCL-based films containing SE in active food packaging applications with the role of preventing oxidation processes and microbial growth, This research was funded by COST Action FP1405 (STSM reference number 39168), the EU H2020 ResUrbis project (Reference number 730349) and the Ministry of Education, Science and Technological Development (Republic of Serbia) project number III46010., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reactive melt mixing of poly(3-hydroxybutyrate)/rice husk flour composites with purified biosustainably produced poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

  • Meléndez-Rodríguez, Beatriz
  • Torres Giner, Sergio
  • Aldureid, Abdulaziz
  • Cabedo, Luis
  • Lagarón Cabello, José María
Novel green composites based on commercial poly(3-hydroxybutyrate) (PHB) filled with 10 wt % rice husk flour (RHF) were melt-compounded in a mini-mixer unit using triglycidyl isocyanurate (TGIC) as compatibilizer and dicumyl peroxide (DCP) as initiator. Purified poly(3- hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) produced by mixed bacterial cultures derived from fruit pulp waste was then incorporated into the green composite in contents in the 5-50 wt % range. Films for testing were obtained thereafter by thermo-compression and characterized. Results showed that the incorporation of up to 20 wt % of biowaste derived PHBV yielded green composite films with a high contact transparency, relatively low crystallinity, high thermal stability, improved mechanical ductility, and medium barrier performance to water vapor and aroma. This study puts forth the potential use of purified biosustainably produced PHBV as a cost-effective additive to develop more affordable and waste valorized food packaging articles., This research was supported by the Spanish Ministry of Science, Innovation, and Universities (MICIU) program number AGL2015-63855-C2-1-R and by the EU H2020 projects YPACK (reference number 773872) and ResUrbis (reference number 730349). B.M.-R. and S.T.-G. acknowledge MICIU for her FPI grant (BES-2016-077972) and his Juan de la Cierva-Incorporación contract (IJCI-2016-29675), respectively. The authors also thank the Joint Unit in Polymers Technology between IATA–CSIC and PIMA-Universitat Jaume I., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Preparation and Characterization of Electrospun Films of Poly (3- hydroxybutyrate-co-3-hydroxyvalerate) Derived From Fruit Pulp Biowaste for Food Biopackaging

  • Meléndez-Rodríguez, Beatriz
  • Castro Mayorga, Jinneth Lorena
  • Reis, M.A.M.
  • Sammon,C.
  • Cabedo, Luis
  • Torres Giner, Sergio
  • Lagarón Cabello, José María
Comunicación al congreso 1st NANOGATEWAY International Scientific Conference, Braga (Portugal) Octubre 2018, Industrial by-product residues management is the main goal to maintain resource conservation and the quality of the environment. The growing concern for plastic waste disposal of petroleum-based materials has intensified the study and development of bio-based and biodegradable polymers, particularly those synthesized from agro-industrial residues [1]. Recently, biopolymers are used to replace petroleum-based synthetic polymers to reduce the non-renewable energy consumption and the carbon dioxide emission [2]. This work reports different methods to purify, namely non-extraction, extraction with sodium hypochlorite (NaClO) (sample 1), and extraction with chloroform (sample 2) of a circular economy based and potentially low-cost poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) produced by mixed microbial cultures derived from fruit pulp, an industrial by-product of the juice industry. The highest yield obtained was 40% with sample 2 and it was the most optimal solution for its processing via electrospinning. After thermal post-processed of the resultant ultrathin fiber mats, in order to obtain continuous films adequate for food packaging applications, the films were characterized in terms of morphology, crystallinity as well as thermal, mechanical, and barrier properties. Different results in their characteristics were found depending on the purification applied. The results showed that sample 2 presented the highest degree of purity, resulting in more transparent films with lower wettability and higher flexibility. Therefore, there are a great potential as interlayers or coatings for food biopackaging applications for these electrospun films made of biomass derived from biowaste [3]., The authors would like to thank the Unidad Asociada IATA-UJI Plastics Technology and the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R and the H2020 EU projects YPACK (reference number 773872) and RES URBIS (reference number 730349) for funding. BM-R and ST-G would also like to thank the MINECO’s FPI (BES-2016-077972) and Juan de la Cierva (IJCI-2016-29675) programs, respectively., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Volatile fatty acid production from mesophilic acidogenic fermentation of organic fraction of municipal solid waste and food waste under acidic and alkaline pH

  • Cheah, Yen Keong
  • Vidal Antich, Carme
  • Dosta, Joan
  • Mata Álvarez, Joan
This study is focused on the effects of pH on the production of volatile fatty acids (VFAs) and their distribution through the acidogenic fermentation of source-sorted organic fraction of municipal solid waste (OFMSW) from a mechanical-biological treatment (MBT) plant, and food waste (FW) from a university canteen. In semi-continuous lab-scale digesters using OFMSW at a hydraulic retention time (HRT) of 3.5 days under acidic conditions (pH 6.0), the VFA concentration in the effluent increased to 9.8-11.5 g L−1 (VS content of the feedstock between 4.2 and 5.2% w/w), while its individual VFA profiling was similar to the influent which was already prefermented (namely, C2 35-41%, C3 18-22%, C4 17-21%, and C5 9-12%). When working with the same conditions but using FW as feedstock, an effluent with a VFA concentration up to 11.5 g VFA L−1 (FW with a VS content of 5.5% w/w) and a stable distribution of C2 and C4 acids (up to 60.3% and 12.9%, respectively) but with very low quantities of C3 and C5 acids (lower than 1.8 and 2.7%, respectively) was obtained. Anaerobic batch tests using FW revealed that alkaline pH near 9 could lead to higher VFA production with high acetic acid content when compared to pH 6. In the semi-continuous fermenters working at alkaline conditions (pH 9.5-10) using OFMSW and FW, an enhanced solubilization of organic matter was registered with respect to the fermenters working under acidic conditions. This fact was not reflected in a higher VFA production when using OFMSW as feedstock, probably due to free ammonia inhibition, since OFMSW was mixed in the MBT plant with supernatant from anaerobic digestion of this biowaste. However, when using FW, alkaline conditions lead to an enhanced VFA production with respect to the reactor working under acidic conditions, being acetic acid the predominant product, which represented up to 91% of the VFA spectrum obtained.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Exploring the potential of co-fermenting sewage sludge and lipids in a resource recovery scenario

  • Peces, Miriam
  • Pozo, Guillermo
  • Koch, Konrad
  • Dosta Parras, Joan
  • Astals Garcia, Sergi
In this study, co-fermentation of primary sludge (PS) or waste activated sludge (WAS) with lipids was explored to improve volatile fatty acid production. PS and WAS were used as base substrate to facilitate lipid fermentation at 20 °C under semi-aerobic conditions. Mono-fermentation tests showed higher VFA yields for PS (32-89 mgCOD gVS-1) than for WAS (20-41 mgCOD gVS-1) where propionate production was favoured. The principal component analysis showed that the base substrate had a notable influence on co-fermentation yields and profile. Co-fermentation with WAS resulted in a greater extent of oleic acid degradation (up to 4.7%) and evidence of chain elongation producing valerate. The occurrence of chain elongation suggests that co-fermentation can be engineered to favour medium-chain fatty acids without the addition of external commodity chemicals. BMP tests showed that neither mono-fermentation nor co-fermentation had an impact on downstream anaerobic digestion.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhancement of volatile fatty acids production from food waste by mature compost addition

  • Cheah, Yen Keong
  • Dosta Parras, Joan
  • Mata Álvarez, Joan
Food waste (FW) collected from a university canteen was treated in acidogenic fermenters to produce volatile fatty acids (VFA) under biological pretreatment with mature compost. Batch assays working at pH 6 revealed an increment of 9.0%, 7.9%, and 4.1% (on COD basis) of VFA concentration when adding 2.5%, 3.5%, and 4.5% w/w of mature compost, respectively, even though the volatile solids (VS) concentration of food waste was lower in the tests with increasing doses of mature compost. For batch tests at pH 7, this VFA generation improvement was lower, even though enhanced COD solubilization was recorded. Operating in semi-continuous conditions at 35 ºC, pH of 6, and hydraulic retention time (HRT) of 3.5 days, the addition of 2.5% w/w of mature compost led to a VFA concentration up to 51.2 ± 12.3% more (on VS basis) when compared to a reference reactor without compost addition. Moreover, the percentage of butyric acid on VS basis in the fermentation broth working at a pH of 6 increased from up to 12.2 ± 1.9% (0% compost addition) to up to 23.5 ± 2.7% (2.5% compost addition). The VFA production was not improved when a higher percentage of mature compost was used (3.5% instead of 2.5% w/w), and it slightly decreased when mature compost addition was lowered to 1.5% w/w. When working at a pH of 7 in the semi-continuous fermenters with the addition of 2.5% w/w mature compost at an HRT of 3.5 days, an improvement of 79% and 104% of the VFA concentration (on VS basis) were recorded as compared to fermenters working at a pH of 6 with 2.5% and 0% w/w of mature compost addition, respectively. At a pH of 7, higher production of propionic and valeric acids was found with respect to the reactor working at a pH of 6. The effect of pH on VFA generation was estimated to have greater contribution than that of only biological pretreatment using mature compost. At a pH of 7, the VFA yield was higher for the fermenter working with 2.5% w/w mature compost but at a pH of 7 and HRT of 5 days, the effect of mature compost on VFA production improvement was lower than that obtained at a pH of 6. Moreover, higher solubilization in terms of soluble chemical oxygen demand and total ammonium was detected when biological pretreatment using mature compost was applied at both a pH of 6 and a pH of 7, which indicates enhanced hydrolysis in both conditions.