Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Using Aerial and Vehicular NFV Infrastructures to Agilely Create Vertical Services

  • Nogales Dorado, Borja
  • Silva, Miguel
  • Vidal Fernández, Iván
  • Luis, Miguel
  • Valera Pintor, Francisco
  • Sargento, Susana
  • Azcorra Saloña, Arturo
5G communications have become an enabler for the creation of new and more complex networking scenarios, bringing together different vertical ecosystems. Such behavior has been fostered by the network function virtualization (NFV) concept, where the orchestration and virtualization capabilities allow the possibility of dynamically supplying network resources according to its needs. Nevertheless, the integration and performance of heterogeneous network environments, each one supported by a different provider, and with specific characteristics and requirements, in a single NFV framework is not straightforward. In this work we propose an NFV-based framework capable of supporting the flexible, cost-effective deployment of vertical services, through the integration of two distinguished mobile environments and their networks: small sized unmanned aerial vehicles (SUAVs), supporting a flying ad hoc network (FANET) and vehicles, promoting a vehicular ad hoc network (VANET). In this context, a use case involving the public safety vertical will be used as an illustrative example to showcase the potential of this framework. This work also includes the technical implementation details of the framework proposed, allowing to analyse and discuss the delays on the network services deployment process. The results show that the deployment times can be significantly reduced through a distributed VNF configuration function based on the publish&-subscribe model., This article has been partially supported by the European H2020 5GinFIRE project (grant agreement 732497). The work of the Universidad Carlos III team members was partially supported by the European H2020 LABYRINTH project (grant agreement H2020-MG-2019-TwoStages-861696), and by the TRUE5G project (PID2019-108713RB-C52PID2019-108713RB-C52/AEI/10.13039/501100011033) funded by the Spanish National Research Agency; and the work of the Instituto de Telecomunicações team members, by the Competitiveness and Internationalization Operational Programme (COMPETE 2020) of the Portugal 2020 framework Mobilizer Project 5G with Nr. 024539 (POCI-01-0247-FEDER-024539).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

A NFV system to support configurable and automated multi-UAV service deployments

  • Nogales Dorado, Borja
  • Sánchez Agüero, Víctor
  • Vidal Fernández, Iván
  • Valera Pintor, Francisco
  • García Reinoso, Jaime José
Proceeding of: DroNet 2018, 4th ACM Workshop on Micro Aerial Vehicle Networks, Systems, and Applications (Co-located with ACM MobiSys 2018), In this paper, we explore the strong potential of Network Function Virtualization (NFV) technologies to enable multi-mission small unmanned aircraft systems. In this context, we analyze the main challenges of using NFV technologies in this emergent field, and we present the design of an NFV system that supports the flexible, automated and cost-effective deployment of network services over small unmanned aerial vehicles. To validate our design, we implemented its most relevant components with open-source technologies, using this first prototype of the system to carry out a set of preliminary experiments that showcase its feasibility and functionality., This article has been partially supported by the European H2020 5GinFIRE project (grant agreement 732497), and by the 5GCity project (TEC2016-76795- C6-3-R) funded by the Spanish Ministry of Economy and Competitiveness.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

SCoT: a secure content-oriented transport

  • Vidal Fernández, Iván
  • García Reinoso, Jaime José
  • Soto Campos, Ignacio
  • Valera Pintor, Francisco
  • Lpez, Diego
The evolution of the Internet has resulted in the deployment of new application-level solutions to enhance the scalability and efficiency of content dissemination (e.g., content delivery networks and peer-to-peer systems). However, despite of this improvement on performance, the utilization of this type of solutions introduces new security concerns, as a content provider must necessarily delegate the role of distributing the content to third parties, and current security solutions, such as TLS and IPsec, do not allow authenticating the original content provider or the content itself in these scenarios. In this paper, we present SCoT, a transport-layer protocol that allows a content provider to bind protection to content, enabling content authentication at receivers regardless of any third party infrastructures that have been used to disseminate the content. Content authentication procedures are executed transparently to end-user applications. We implemented a fully operational prototype of the protocol in Java, including an API to support the development of SCoT applications. We utilized it to configure an experimentation scenario that served to validate a theoretical analysis of the SCoT throughput and to illustrate the performance that can be achieved in a practical deployment. The paper concludes describing a set of use cases of the protocol., This article has been partially supported by the European H2020 5Gin-FIRE project (grant agreement 732497), and by the DRONEXT project (TEC2014-54335-C4-2-R) funded by the Spanish Ministry of Economy and Competitiveness. The work of Ignacio Soto has partially been supported by the Spanish Texeo project (TEC2016-80339-R) funded by the Spanish Ministry of Economy and Competitiveness.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Design and Deployment of an Open Management and Orchestration Platform for Multi-Site NFV Experimentation

  • Nogales Dorado, Borja
  • Vidal Fernández, Iván
  • López, Diego R.
  • Rodríguez, Juan
  • García Reinoso, Jaime José
  • Azcorra Saloña, Arturo
Management and orchestration of virtual resources and functions, commonly referred to as MANO, are key functionalities of NFV environments. This article describes the design and deployment of the NFV MANO platform of 5TONIC, the open research and innovation laboratory on 5G technologies founded by Telefonica and IMDEA Networks. This NFV MANO platform provides 5TONIC trials and experiments with access to a functional production-like NFV environment, enabling experimentation with novel NFV products and services. As a relevant feature, the platform is capable of incorporating external sites to complement the portfolio of software and hardware resources that can be made available for experimentation activities. The 5TONIC MANO platform has been designed and built using open source technologies. The research carried out during its design and deployment has resulted in a contribution already made to its upstream projects regarding the automated configuration of virtualized network functions. Finally, we explore the scalability properties of the 5TONIC MANO platform, and we experimentally validate its functional capacity to orchestrate multi-site experiments., This article has been partially supported by the European H2020 5GinFIRE project (grant agreement 732497) and by the 5GCity project (TEC2016-76795-C6-3-R) funded by the Spanish Ministry of Economy and Competitiveness., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Enabling the orchestration of IoT slices through edge and cloud microservice platforms

  • Fernandez, Juan Manuel
  • Vidal Fernández, Iván
  • Valera Pintor, Francisco
This article addresses one of the main challenges related to the practical deployment of Internet of Things (IoT) solutions: the coordinated operation of entities at different infrastructures to support the automated orchestration of end-to-end Internet of Things services. This idea is referred to as "Internet of Things slicing" and is based on the network slicing concept already defined for the Fifth Generation (5G) of mobile networks. In this context, we present the architectural design of a slice orchestrator addressing the aforementioned challenge, based on well-known standard technologies and protocols. The proposed solution is able to integrate existing technologies, like cloud computing, with other more recent technologies like edge computing and network slicing. In addition, a functional prototype of the proposed orchestrator has been implemented, using open-source software and microservice platforms. As a first step to prove the practical feasibility of our solution, the implementation of the orchestrator considers cloud and edge domains. The validation results obtained from the prototype prove the feasibility of the solution from a functional perspective, verifying its capacity to deploy Internet of Things related functions even on resource constrained platforms. This approach enables new application models where these Internet of Things related functions can be onboarded on small unmanned aerial vehicles, offering a flexible and cost-effective solution to deploy these functions at the network edge. In addition, this proposal can also be used on commercial cloud platforms, like the Google Compute Engine, showing that it can take advantage of the benefits of edge and cloud computing respectively, The work of Ivan Vidal and Francisco Valera was partially supported by the European H2020 5GinFIRE project (grant agreement 732497), and by the 5GCity project (TEC2016-76795-C6-3-R) funded by the Spanish Ministry of Economy and Competitiveness.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Automated deployment of an internet protocol telephony service on unmanned aerial vehicles using network functions virtualization

  • Nogales Dorado, Borja
  • Vidal Fernández, Iván
  • Sánchez Agüero, Víctor
  • Valera Pintor, Francisco
  • González Blázquez, Luis Félix
  • Azcorra Saloña, Arturo
The Network Function Virtualization (NFV) paradigm is one of the key enabling technologies in the development of the 5 th generation of mobile networks. This technology aims to lessen the dependence on hardware in the provision of network functions and services by using virtualization techniques that allow the softwarization of those functionalities over an abstraction layer. In this context, there is increasing interest in exploring the potential of unmanned aerial vehicles (UAVs) to offer a flexible platform capable of enabling cost-effective NFV operations over delimited geographic areas. To demonstrate the practical feasibility of utilizing NFV technologies in UAV platforms, a protocol is presented to set up a functional NFV environment based on open source technologies, in which a set of small UAVs supply the computational resources that support the deployment of moderately complex network services. Then, the protocol details the different steps needed to support the automated deployment of an internet protocol (IP) telephony service over a network of interconnected UAVs, leveraging the capacities of the configured NFV environment. Experimentation results demonstrate the proper operation of the service after its deployment. Although the protocol focuses on a specific type of network service (i.e., IP telephony), the described steps may serve as a general guide to deploy other type of network services. On the other hand, the protocol description considers concrete equipment and software to set up the NFV environment (e.g., specific single board computers and open source software). The utilization of other hardware and software platforms may be feasible, although the specific configuration aspect of the NFV environment and the service deployment may present variations with respect to those described in the protocol.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Milano: una visión futura para un UAS táctico

  • Vidal Fernández, Iván
  • Sánchez Agüero, Víctor
  • Valera Pintor, Francisco
  • Nogales Dorado, Borja
  • Cabezas, Jaime
  • Vidal, Carlos
  • López, Alicia
  • González, Daniel
  • Díez, José
  • Berrazueta, Laura
  • Merino, Manuel
Proceeding of: VI Congreso Nacional de i+d en Defensa y Seguridad (DESEI+D 2018), Valladolid, 20-22 de noviembre de 2018, En este artículo se presenta el nuevo sistema de aeronaves no tripuladas Milano, del Instituto Nacional de Técnica Aeroespacial (INTA). Con una autonomía de vuelo de 20 horas, una carga útil de hasta 150 Kg, y un sistema de comunicaciones radio TCP/IP, el sistema desarrollado posibilita misiones de observación y vigilancia que van más allá de las ofrecidas por un sistema táctico tradicional. En el artículo se identifican las principales características del sistema Milano, en particular las relativas a su sistema de comunicaciones en línea de vista radioeléctrica basado en el protocolo IP. Asimismo, se describen las líneas actuales de trabajo consideradas para la evolución de este sistema: 1) mecanismos de vuelo cooperativo; 2) nuevas evoluciones del sistema de comunicaciones radio en línea de vista; 3) desarrollo de mecanismos para la distribución segura de la información de tele-medida de las aeronaves; y 4) estudio de nuevos enfoques disruptivos para favorecer el despliegue flexible de servicios de telecomunicaciones sobre la plataforma de comunicaciones del Milano., El trabajo realizado por Víctor Sánchez y Borja Nogales ha sido parcialmente financiado por la Unión Europea, mediante el proyecto del H2020 5GinFIRE (grant agreement 732497), y por el Ministerio de Economía y Competitividad, a través del proyecto 5GCITY (TEC2016-76795-C6-3-R).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Investigating the deployability of VoIP services over wireless interconnected micro aerial vehicles

  • Sánchez Agüero, Víctor
  • Nogales Dorado, Borja
  • Valera Pintor, Francisco
  • Vidal Fernández, Iván
Emerging technological devices, such as Unmanned Aircraft Vehicles (UAV) and Single Board Computers (SBC), are being increasingly employed in recent years, thanks to the advances in electronics and the wide variety of sensors that are endowed. This paper aims at analyzing the viability of deploying multimedia services, focusing on the voice scenario, over wireless interconnected Micro Air Vehicles (MAV), also known as drones. Toward this end, we assessed the performance both of the embedded wireless cards of current drones and also SBCs, which may be carried as payload in existing UAV solutions. Driven by the results obtained in these experiments, we then deployed an operational VoIP service over a network of commercial MAVs, to perform an experimental analysis on the resource capabilities of these devices and demonstrate that this type of service can certainly be used., This article has been partially supported by the European H2020 5GinFIRE project (grant agreement 732497) and the 5G‐City project (TEC2016‐76795‐C6‐3‐R) funded by the Spanish Ministry of Economy and Competitiveness.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Adaptable and automated small UAV deployments via virtualization

  • Nogales Dorado, Borja
  • Sánchez Agüero, Víctor
  • Vidal Fernández, Iván
  • Valera Pintor, Francisco
In this paper, we present a practical solution to support the adaptable and automated deployment of applications of Small Unmanned Aerial Vehicles (SUAVs). Our solution is based on virtualization technologies, and considers SUAVs as programmable network platforms capable of executing virtual functions and services, which may be dynamically selected according to the requirements specified by the operator of the aerial vehicles. This way, SUAVs can be flexibly and rapidly adapted to different missions with heterogeneous objectives. The design of our solution is based on Network Function Virtualization (NFV) technologies, developed under the umbrella of the fifth generation of mobile networks (5G), as well as on existing Internet protocol standards, including flying ad hoc network routing protocols. We implemented a functional prototype of our solution using well-known open source technologies, and we demonstrated its practical feasibility with the execution of an IP telephony service. This service was implemented as a set of virtualized network functions, which were automatically deployed and interconnected over an infrastructure of SUAVs, being the telephony service tested with real voice-over-IP terminals., This article was partially supported by the European H2020 5GinFIRE project (grant agreement 732497), and by the 5GCity project (TEC2016-76795-C6-3-R) funded by the Spanish Ministry of Economy and Competitiveness.
Repositorio Digital UPCT
Publicación Artículo científico (JournalArticle)

MIGRATE: Mobile Device Virtualisation Through State Transfer

  • Santa Lozano, José
  • Ortiz Murillo, Jordi
  • Fernández Ruiz, Pedro Javier
  • Luis, Miguel
  • Gomes, Christian
  • Oliveira, Jorge
  • Gomes, Diogo
  • Sánchez Iborra, Ramón Jesús
  • Sargento, Susana
  • Gómez Skarmeta, Antonio Fernando
Delegation of processing tasks to the network has moved from cloud-based schemes to edge computing solutions where nearby servers process requests in a timely manner. Virtualisation technologies have recently given data cloud and network providers the required flexibility to offer such on-demand resources. However, the maintenance of close computing resources presents a challenge when the served devices are on the move. In this case, if processing continuity is desired, a transference of processing resources and task state should be committed to maintain the service to end devices. The solution here presented, MIGRATE, proposes the concept of virtual mobile devices (vMDs) implemented as Virtual Functions (VxF) and acting as virtual representatives of physical processing devices. vMDs are instantiated at the edge of the access network, following a Multi-Access Edge Computing (MEC) approach, and move across different virtualisation domains. MIGRATE provides seamless and efficient transference of these software entities to follow the real location of mobile devices and continue supporting their physical counterparts. Software Defined Networks and Management and Operation functions are exploited to “migrate” vMDs to new virtualisation domains by forwarding data flows to the former domain until the new one is prepared, while a distributed data base avoids the transference of data. The solution has been deployed in a reference vehicular scenario at the Institute of Telecommunications Aveiro premises within the 5GINFIRE European project. In particular, the system has been evaluated under different virtualisation domains to study the operation of the migration approach in a vehicular monitoring scenario. The results validate the system from the application viewpoint with a Web monitoring tool, and the migration of the digital twin provided as VxF is analysed attending to the modification of data flows, indicating a seamless transition between virtualisation domains in a timely manner., This work has been supported by European Commission, under the projects 5GINFIRE (Grant No. 732497) and 5G-MOBIX (Grant No.825496); by the Spanish Ministry of Science, Innovation and Universities, under the project PERSEIDES (Grant No. TIN2017-86885-R) and the Ramon y Cajal Program (Grant No. RYC-2017-23823); and by the BBVA Foundation, under the 2018 Leonardo Grant for Researchers and Cultural Creators.