Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Cost-effective ultra-high temperature latent heat thermal energy storage systems

  • Ramos Cabal, Alba|||0000-0002-3841-3260
  • López, Esther
  • del Cañizo, Carlos
  • Datas Medina, Alejandro
The availability of cost-effective energy storage technologies with durations from 10 to 100 h is key for intermittent renewable energies, like wind or solar, to become a large share of the electrical grid power. Battery prices forecasted for the upcoming years are still too expensive; and storing the energy as heat instead of electricity, arises as a promising cheaper solution. Even if there is an efficiency penalty when converting heat back to electricity, the low cost of thermal energy storage (TES) systems is an important advantage. Besides, not always the heat stored in a TES system needs to be converted to electricity, as heat corresponds to about 50% of the global energy demand. In this work, the potential of Ultra-High Temperature Latent Heat Thermal Energy Storage (UH-LHTES), which can reach energy capacity costs below 10 € well beyond 1000 ¿ /kWh by storing heat at temperatures C, is presented with the help of a Computational Fluid Dynamics (CFD) model. Modelling results, together with real materials performance and cost data, allow to estimate cost-efficiency boundaries for UH-LHTES systems for a range of sizes from 10 kWh th to 10 MWh th . The CFD model has been validated reproducing the real size and materials of a UH-LHTES prototype developed in the framework of the AMADEUS project. The CFD model is proven to be a reliable tool to reproduce the operation of a UH-LHTES system and it predicts quite precisely UH-LHTES prototype discharge rates and heat losses, This work has been partially funded by the Spanish Minister for Science and the Agencia Estatal de Investigación for the funding provided in the Project TERMOCELL (ENE201786683-R - MINECO/AEI/ FEDER, UE) with the support of FEDER funds, and GETPV (PID2020115719RB-C22) funded by MCIN/ AEI /10.13039/ 501100011033, as well as the Regional Government of Madrid, for the projects ANDREA (funded in the "programa de apoyo a la realización de Proyectos de I + D para jóvenes investigadores 2019 ′′ ) and MADRID-PV2 (CAM S2018/EMT-4308). Additional support has been provided by the EU-funded FET projects NATHALIE (ID 945858) and AMADEUS (ID 737054). A. Ramos acknowledges the Serra Húnter Program from the Generalitat de Catalunya for her Serra Húnter Fellow post
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Germanium photovoltaic cells with MoO x hole-selective contacts

  • Alcañiz, A.
  • López Rodríguez, Gema|||0000-0003-4806-5180
  • Martín García, Isidro|||0000-0001-8833-9057
  • Jiménez Pagán, Alba
  • Datas Medina, Alejandro
  • Calle, Eric
  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Gerling Sarabia, Luis Guillermo
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • del Cañizo Nadal, Carlos
  • Alcubilla González, Ramón|||0000-0003-4827-4513
© <2019> Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Very thin, thermally evaporated MoOx (x¿<¿3) layer has been used as transparent hole-selective contact on an n-type Germanium substrate to effectively demonstrate PV conversion capability. The fabricated MoOx/Ge heterojunction PV cell shows a photocurrent density of 44.8¿mA/cm2 under AM1.5G illumination, which is comparable to that of conventional Ge PV cells. However, a low open-circuit voltage of 138¿mV is obtained, which might be explained by the presence of tunnelling mechanisms through the MoOx/Ge interface. To our knowledge, this is the first demonstration of a hole-selective contact made of transition metal oxide on an n-type semiconductor different from c-Si. Thus, this work may have important implications toward the development of new device architectures, such as novel low-cost Ge PV cells with possible applications in multijunction solar cells and thermophotovoltaics., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Cost-effective ultra-high temperature latent heat thermal energy storage systems

  • Ramos Cabal, Alba
  • González López, Esther
  • del Cañizo, Carlos
  • Datas Medina, Alejandro
The availability of cost-effective energy storage technologies with durations from 10 to 100 h is key for intermittent renewable energies, like wind or solar, to become a large share of the electrical grid power. Battery prices forecasted for the upcoming years are still too expensive; and storing the energy as heat instead of electricity, arises as a promising cheaper solution. Even if there is an efficiency penalty when converting heat back to electricity, the low cost of thermal energy storage (TES) systems is an important advantage. Besides, not always the heat stored in a TES system needs to be converted to electricity, as heat corresponds to about 50% of the global energy demand. In this work, the potential of Ultra-High Temperature Latent Heat Thermal Energy Storage (UH-LHTES), which can reach energy capacity costs below 10 € well beyond 1000 ¿ /kWh by storing heat at temperatures C, is presented with the help of a Computational Fluid Dynamics (CFD) model. Modelling results, together with real materials performance and cost data, allow to estimate cost-efficiency boundaries for UH-LHTES systems for a range of sizes from 10 kWh th to 10 MWh th . The CFD model has been validated reproducing the real size and materials of a UH-LHTES prototype developed in the framework of the AMADEUS project. The CFD model is proven to be a reliable tool to reproduce the operation of a UH-LHTES system and it predicts quite precisely UH-LHTES prototype discharge rates and heat losses, This work has been partially funded by the Spanish Minister for Science and the Agencia Estatal de Investigación for the funding provided in the Project TERMOCELL (ENE201786683-R - MINECO/AEI/ FEDER, UE) with the support of FEDER funds, and GETPV (PID2020115719RB-C22) funded by MCIN/ AEI /10.13039/ 501100011033, as well as the Regional Government of Madrid, for the projects ANDREA (funded in the "programa de apoyo a la realización de Proyectos de I + D para jóvenes investigadores 2019 ′′ ) and MADRID-PV2 (CAM S2018/EMT-4308). Additional support has been provided by the EU-funded FET projects NATHALIE (ID 945858) and AMADEUS (ID 737054). A. Ramos acknowledges the Serra Húnter Program from the Generalitat de Catalunya for her Serra Húnter Fellow post, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Germanium photovoltaic cells with MoO x hole-selective contacts

  • Alcañiz, A.
  • López Rodríguez, Gema
  • Martín García, Isidro
  • Jiménez Pagán, Alba
  • Datas Medina, Alejandro
  • Calle, Eric
  • Ros Costals, Eloi
  • Gerling Sarabia, Luis Guillermo
  • Voz Sánchez, Cristóbal
  • del Cañizo Nadal, Carlos
  • Alcubilla González, Ramón
© <2019> Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Very thin, thermally evaporated MoOx (x¿<¿3) layer has been used as transparent hole-selective contact on an n-type Germanium substrate to effectively demonstrate PV conversion capability. The fabricated MoOx/Ge heterojunction PV cell shows a photocurrent density of 44.8¿mA/cm2 under AM1.5G illumination, which is comparable to that of conventional Ge PV cells. However, a low open-circuit voltage of 138¿mV is obtained, which might be explained by the presence of tunnelling mechanisms through the MoOx/Ge interface. To our knowledge, this is the first demonstration of a hole-selective contact made of transition metal oxide on an n-type semiconductor different from c-Si. Thus, this work may have important implications toward the development of new device architectures, such as novel low-cost Ge PV cells with possible applications in multijunction solar cells and thermophotovoltaics., Peer Reviewed, Postprint (author's final draft)
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Wetting behavior and reactivity of molten silicon with h-BN substrate at ultrahigh temperatures up to 1750 °C

  • Polkowski, Wojciech
  • Sobczak, Natalia
  • Nowak, Rafal
  • Kudyba, Artur
  • Bruzda, Grzegorz
  • Polkowska, Adelajda
  • Homa, Marta
  • Turalska, Patrycja
  • Tangstad, Merete
  • Safarian, Jafar
  • Moosavi-Khoonsari, Elmira
  • Datas Medina, Alejandro|||0000-0001-5964-3818
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

AMADEUS: Next Generation Materials and Solid State Devices for Ultra High Temperature Energy Storage and Conversion

  • Datas Medina, Alejandro|||0000-0001-5964-3818
  • Cristobal López, Ana Belén|||0000-0002-4314-6160
  • Cañizo Nadal, Carlos del|||0000-0003-1287-6854
  • Antolín Fernández, Elisa|||0000-0002-5220-2849
  • Martí Vega, Antonio|||0000-0002-8841-7091
  • Beaughon, M.
  • Nikolopoulos, N.
  • Nikolopoulos, A.
  • Zeneli, M.
  • Sobezak, N.
  • Polkowski, W.
  • Tangstad, M.
  • Safarian, J.
  • Trucchi, D.m.
  • Bellucci, A.
  • Girolami, M.
  • Marx, R.
  • Bestenlehner, D.
  • Lang, S.
  • Vitulano, A.
  • Sabbatella, G.
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Molten silicon at the hearth of a novel energy storage system

  • Ramos Cabal, Alba
  • Datas Medina, Alejandro|||0000-0001-5964-3818
  • Cañizo Nadal, Carlos del|||0000-0003-1287-6854
  • Martí Vega, Antonio|||0000-0002-8841-7091
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Thermophotovoltaic efficiency measurement: design and analysis of a novel experimental method

  • Cabrera Gallardo, Alejandro
  • Ramos Cabal, Alba
  • Artacho Huertas, Irene|||0000-0003-0213-2966
  • Gómez Larios, Miguel
  • Gabin, K.
  • Martí Vega, Antonio|||0000-0002-8841-7091
  • Datas Medina, Alejandro|||0000-0001-5964-3818
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Techno-economic analysis of solar PV power-to-heat-to-power storage and trigeneration in the residential sector

  • Datas Medina, Alejandro|||0000-0001-5964-3818
  • Ramos Cabal, Alba
  • Cañizo Nadal, Carlos del|||0000-0003-1287-6854
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Germanium photovoltaic cells with MoOx hole-selective contacts

  • Alcañiz, A.
  • López, G.
  • Martín, I.
  • Jiménez Pagán, Alba|||0000-0002-2619-4806
  • Datas Medina, Alejandro|||0000-0001-5964-3818
  • Calle, E.
  • Ros, E.
  • Gerling, L.G.
  • Voz, C.
  • Cañizo Nadal, Carlos del|||0000-0003-1287-6854
  • Alcubilla, R.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Thermionic-enhanced near-field thermophotovoltaics for medium-grade heat sources

Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Hybrid thermionic-photovoltaic converter with an In0.53Ga0.47As anode

  • Bellucci, A.
  • García Linares, Pablo|||0000-0003-2369-3017
  • Villa Morales, Juan|||0000-0003-1322-1518
  • Martí Vega, Antonio|||0000-0002-8841-7091
  • Datas Medina, Alejandro|||0000-0001-5964-3818
  • Trucchi, D.M.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

A Three-Terminal Hybrid Thermionic-Photovoltaic Energy Converter

  • Bellucci, Alessandro
  • García-Linares Fontes, Pablo|||0000-0003-2369-3017
  • Martí Vega, Antonio|||0000-0002-8841-7091
  • Trucchi, Daniele Maria
  • Datas Medina, Alejandro|||0000-0001-5964-3818
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Cost-effective ultra-high temperature latent heat thermal energy storage systems

  • Ramos Cabal, Alba|||0000-0002-9039-3586
  • Lopez Gonzalo, Eduardo|||0000-0002-3671-7148
  • López Estrada, Esther|||0000-0003-4256-9329
  • Cañizo Nadal, Carlos del|||0000-0003-1287-6854
  • Datas Medina, Alejandro|||0000-0001-5964-3818
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Latent heat thermophotovoltaic batteries

  • Datas Medina, Alejandro|||0000-0001-5964-3818
  • López Ceballos, Alicia|||0000-0003-0197-2103
  • López Estrada, Esther|||0000-0003-4256-9329
  • Ramos Cabal, Alba|||0000-0002-9039-3586
  • Cañizo Nadal, Carlos del|||0000-0003-1287-6854