Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Overcoming Voltage Losses in Vanadium Redox Flow Batteries Using WO3 as a Positive Electrode

  • Mousavihashemi, Seyedabolfazl
  • Murcia López, Sebastián
  • Rodriguez Olguin, Miguel A.
  • Gardeniers, Han
  • Andreu, Teresa
  • Morante, Joan Ramón
  • Susarrey Arce, Arturo
  • Flox, Cristina
Vanadium redox flow batteries (VRFBs) are appealing large-scale energy storage systems due to their unique properties of independent energy/power design. The VRFBs stack design is crucial for technology deployment in power applications. Besides the design, the stack suffers from high voltage losses caused by the electrodes. The introduction of active sites into the electrode to facilitate the reaction kinetic is crucial in boosting the power rate of the VRFBs. Here, an O-rich layer has been applied onto structured graphite felt (GF) by depositing WO3 to increase the oxygen species content. The oxygen species are the active site during the positive reaction (VO2+/VO2+) in VRFB. The increased electrocatalytic activity is demonstrated by the monoclinic (m)-WO3/GF electrode that minimizes the voltage losses, yielding excellent performance results in terms of power density output and limiting current density (556 mWcm−2@800 mAcm−2). The results confirm that the m-WO3/GF electrode is a promising electrode for high-power in VRFBs, overcoming the performance-limiting issues in a positive half-reaction., Miguel A. Rodriguez-Olguin, Han Gardeniers, and Arturo Susarrey-Arce acknowledge the funding for their research received from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program (Grant agreement No. 742004). C. Flox acknowledges financial support from the Ministery of Science Spain, AEI Severo Ochoa Grant CEX2019-000917-S, and the European Commission under the grant MSCA-IF-EF-ST, proposal number 101026162., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Additive manufacturing of 3D yttria-stabilized zirconia microarchitectures

  • Winczewski, J.P.
  • Zeiler, S.
  • Gabel, S.
  • Maestre Varea, David
  • Merle, B.
  • Gardeniers, J.G.E.
  • Arce, A. Susarrey
The additive manufacturing (AM) of yttria-stabilized zirconia (YSZ) microarchitectures with sub-micrometer precision via two-photon lithography (TPL), utilizing custom photoresin containing zirconium and yttrium monomers is investigated. YSZ 3D microarchitectures can be formed at low temperatures (600 ◦C). The low- temperature phase stabilization of ZrO2 doped with Y2O3 demonstrates that doping ZrO2 with ≈10 mol% Y2O3 stabilizes the c-ZrO2 phase. The approach does not utilize YSZ particles as additives. Instead, the crystallization of the YSZ phase is initiated after printing, i.e., during thermal processing in the air at 600 ◦C – 1200 ◦C for one and two hours. The YSZ microarchitectures are characterized in detail. This includes understanding the role of defect chemistry, which has been overlooked in TPL-enabled micro-ceramics. Upon UV excitation, defect- related yellowish-green emission is observed from YSZ microarchitectures associated with intrinsic and extrinsic centers, correlated with the charge compensation due to Y3+doping. The mechanical properties of the microarchitectures are assessed with manufactured micropillars. Micropillar compression yields the intrinsic mechanical strength of YSZ. The highest strength is observed for micropillars annealed at 600 ◦C, and this characteristic decreased with an increase in the annealing temperature. The deformation behavior gradually changes from ductile to brittle-like, correlating with the Hall–Petch strengthening mechanism