Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Lithium Borate Ionic Liquids as Single-Component Electrolytes for Batteries

  • Guzmán González, Gregorio
  • Álvarez Tirado, Marta
  • Olmedo Martínez, Jorge L.
  • Picchio, Matías L.
  • Casado Pérez, Nerea
  • Forsyth, Maria
  • Mecerreyes Molero, David
Current electrolytes for lithium batteries are usually composed of at least two chemical compounds, an organic solvent such as a cyclic carbonate and a lithium salt such as LiPF6. Here, the concept of using a single-component electrolyte is demonstrated in lithium batteries based on new lithium borate ionic liquids at room temperature. The design concept of this class of lithium ionic liquids (LiILs) is based on an asymmetrically substituted central tetracoordinate boron atom with oligoethylene glycol groups, fluorinated electron-attracting groups, and one alkane group. The optimized borateLi+ LiILs show a high ionic conductivity value of >10−4 S cm−1 at 25 °C, high lithium transference numbers ( = 0.4 – 0.5) and electrochemical stability (>4 V). Some of the LiILs present high compatibility with lithium-metal electrodes showing stable polarization profiles in platting/stripping tests. The selected LiIL is investigated as single-component electrolytes in lithium-metal battery cells showing discharge capacity values in Li0/LiIL/lithium–iron phosphate and Li0/LiIL/lithium titanate cells of 124 and 75 mAh g−1, respectively, at a C-rate of 0.2 C and 65 °C with low-capacity loss., This work was funded and supported by a Grant for Basque Government through grant IT1309-19, and European Commission's funded Marie Skłodowska–Curie project POLYTE-EID (Project No. 765828) and Spanish MCIN/AEI/PID2020-119026GB-I00. G.G.-G. is grateful to “Secretaría de Educación, Ciencia, Tecnología e Innovación” from Ciudad de México for the postdoctoral fellowship through grant SECTEI/133/2019. G.G.-G. also thanks the PhD. IOSM for being the driving force and constant support.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Single-ion lithium conducting polymers with high ionic conductivity based on borate pendant groups

  • Guzmán González, Gregorio
  • Vauthier, Soline
  • Álvarez Tirado, Marta
  • Cotte, Stéphane
  • Castro, Laurent
  • Guéguen, Aurélie
  • Casado Pérez, Nerea
  • Mecerreyes Molero, David
This communication reports a family of single-ion lithium conducting polymer electrolytes based on highly delocalized borate groups is reported. The effect of the nature of the substituents on the boron atom on the ionic conductivity of the resultant methacrylic polymers was analyzed. To the best of our knowledge the lithium borate polymers endowed with flexible and electron-withdrawing substituents presents the highest ionic conductivity reported for a lithium single-ion conducting homopolymer (1.65×10−4 S cm−1 at 60 °C). This together with its high lithium transference number tLi+= =0.93 and electrochemical stability window of 4.2 V vs Li0/Li+ show promise for application in lithium batteries. To illustrate this, a lithium borate monomer was integrated into a single-ion gel polymer electrolyte which showed good performance on lithium symmetrical cells (<0.85 V at ±0.2 mA cm−2 for 175 h)., This work was supported by a Grant for Basque Government through grant IT1309-19, and European Commission’s funded Marie Skłodowska-Curie project POLYTE-EID (project no. 765828) and Spanish MCIN/ AEI/ PID2020-119026GB-I00. G.G-G. is grateful to "Secretaría de Educación, Ciencia, Tecnología e Innovación" from Ciudad de México for the postdoctoral fellowship through grant (SECTEI/133/2019).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Single- Versus Dual-Ion UV-Cross-Linked Gel Polymer Electrolytes for Li–O2 Batteries

  • Álvarez Tirado, Marta
  • Castro, Laurent
  • Guzmán González, Gregorio
  • Porcarelli, Luca
  • Mecerreyes Molero, David
Lithium-O2 batteries represent one of the most appealing candidates for battery electric vehicles (BEV) due to its remarkable theoretical high energy density, similar to fossil fuels. Solid polymer electrolytes represent a plausible solution to tackle some of the challenges associated to conventional liquid-based Li-O2 batteries, including safety concerns. Herein, cross-linked robust gel polymer electrolytes (GPE) based on poly(ethylene glycol) dimethacrylate (PEGDM) and tetraethylene glycol dimethyl ether (TEGDME) as plasticizer are prepared by rapid UV-photopolymerization. Both types of robust GPEs presented high ionic conductivity at room temperature (1.6·10−4 S·cm−1 and 1.4·10−3 S·cm−1 for single ion or dual ion, respectively). Both types of GPEs, single ion and dual ion lithium conductors, have been compared for the first time on Li-O2 cells. First, their performance was investigated in symmetrical Li|Li cells. In this case, the dual-ion GPE showed an outstanding behavior where the overpotential was <0.2 V vs Li0/Li+ for more than 40 hours at a current density as highs as ±1 mA·cm−2. On the other hand, in full Li-O2 configuration, the single ion GPE cell showed superior discharge capacity, up to 2.38 mAh·cm−2. A dynamic discharge characterization technique is proposed here as a method for evaluating the polarization effect in electrolytes during discharge in an easy, quantifiable and reproducible manner., This work was supported by the European Commission´s funded Marie Skłodowska-Curie project POLYTE-EID (Project No. 765828). L.P. has received funding from the European Commission Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 797295 (eJUMP). G.G-G. is grateful to “Secretaría de Estado de Ciencia, Tecnología e Innovación” from Ciudad de Mexico for the current postdoctoral fellowship (SECTEI/133/2019).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Designing boron-based single-ion gel polymer electrolytes for lithium batteries by photopolymerization

  • Álvarez Tirado, Marta
  • Guzmán González, Gregorio
  • Vauthier, Soline
  • Cotte, Stéphane
  • Guéguen, Aurélie
  • Castro, Laurent
  • Mecerreyes Molero, David
Single-ion lithium conducting polymer electrolytes based on delocalized borate groups have been designed and synthesized by rapid UV-photopolymerisation. For this purpose, three different functional lithium boron sp3 anionic monomers, containing fluorinated, ethoxy, or a blend of both functionalities have been synthesized. These monomers were photopolymerized in the presence of a PEG-di-acrylate crosslinker and tetraglyme as plasticizer. By this method, gel polymer electrolytes (SIPEs) endowed with lithium single-ion conduction were prepared. The impact generated by the different functionalities of the borate groups and the addition of plasticizer on the electrochemical and ion conducting properties of the synthesized polymer electrolytes are analyzed in detail. These polymer electrolytes showed high ionic conductivity (1.71·10 -4 S·cm-1 at 25 °C) and high lithium transference number values (up to 0.85). Finally, they were investigated as solid electrolytes in lithium metal symmetrical cells showing good performance (<0.85 V at ±0.2 mA·cm-2 for 175 h)., This work was supported by the European Commission´s funded Marie Skłodowska-Curie project POLYTE-EID (Project No. 765828). G.G-G. is grateful to "Secretaría de Educación, Ciencia, Tecnología e Innovación" from Ciudad de México for the postdoctoral fellowship through grant (SECTEI/133/2019). Author 1 and Author 2 contributed equally to this work. The authors are also grateful to Maria Rosaria Caputo for her valuable help with the TGA testing.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Iongel Soft Solid Electrolytes Based on [DEME][TFSI] Ionic Liquid for Low Polarization Lithium-O-2 Batteries

  • Álvarez Tirado, Marta
  • Castro, Laurent
  • Guéguen, Aurélie
  • Mecerreyes Molero, David
Lithium-air/O-2 batteries are a promising battery technology for automotive applications due to their high energy density. However, many challenges need to be solved, particularly the high reactivity of the electrolyte with oxygen superoxide radicals and its low cyclability. In this work, we present a simple and fast way to prepare polymer-based iongel soft solid electrolytes. Thermally and mechanically stable iongels are prepared by fast UV-photopolymerisation exhibiting a high ionic conductivity (similar to 1.2 x 10(-3) S cm(-1) at 25 degrees C). When used as solid electrolytes in lithium symmetrical cells, they can withstand a critical current density of 0.5 mA cm(-2). Performance in Li-O-2 cells showed capacities as large as 3.3 mAh cm(-2), and cycling capability of 25 cycles, exceeding results on liquid-counterpart cells., European Commission's funded Marie Skłodowska-Curie. Grant Number: 765828