Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sub-ns-pulsed laser cleaning of an archaeological bone from the Sierra de Atapuerca, Spain: a case study

  • Rahman, Md. Ashiqur
  • Fuente, Germán F. de la
  • Carretero, José Miguel
  • Maina Maingi, Evan
  • Alonso Abad, María Pilar
  • Alonso Alcalde, Rodrigo
  • Chapoulie, Rémy
  • Schiavon, Nick
  • Angurel, Luis A.
Controlled laser irradiation parameters using recently developed sub-nanosecond pulsed laser technology with emission wavelength in the near Infrared regime (1064 nm) have been assessed on a Pleistocene bone from the archaeological site of Sierra de Atapuerca, Spain. Burst pulse mode was employed to explore contaminant removal efficiency, while at the same time, assessing the degree of damage produced to the underlying original substrate surface. The surface morphology and composition of the deteriorated bone have been characterized, along with the effects of laser irradiation at 1064 nm, using Optical Microscopy (OM), Scanning Electron Microscopy–with Energy Dispersive X-ray Spectrometry (SEM–EDS), and X-ray Photoelectron Spectroscopy (XPS). The most effective laser cleaning parameters in burst mode have been identified in order to optimize the emission parameters of the laser, thus localizing its interaction within the outermost layers of contaminants and degradation products, avoiding damage to the underlying original bone surface. Hence, threshold cleaning and substrate damage values have been determined for this new sub-ns laser, paving the way to safer laser cleaning procedures that may be useful for the effective conservation of bone archaeological artifacts., Project supported by H2020-MSCA-ITN-EJD/ED-ARCHMAT action funding under the Marie Skłodowska-Curie grant agreement, no 766311. Partial support obtained from Departamento de Ciencia, Universidad y Sociedad del Conocimiento of Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_20R). The Atapuerca research project is financed by Ministerio de Ciencia, Innovación y Universidades project PGC 2018-093925-B-C33. Fieldwork at the Atapuerca sites is funded by the Junta de Castilla y León and the Fundación Atapuerca. The fossil analysed in this work was made available by the Laboratory of Human Evolution of the University of Burgos, in close collaboration with the “Colección Museística de Castilla y León” of the Junta de Castilla y León; we acknowledge Professor Juan Luis Arsuaga for the permit to analyse the sample. The use of Servicio General de Apoyo a la Investigación and the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at the University of Zaragoza is acknowledged. This work is part of the ongoing collaboration between INMA (CSIC-University of Zaragoza) and University of Burgos, under the auspices of Unidad Asociada de I+D+i al CSIC “Vidrio y Materiales del Patrimonio Cultural (VIMPAC)”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Historical stained-glass window laser preservation: The heat accumulation challenge, Conservación de vidrieras históricas con tecnologías láser: el reto de limitar la acumulación de calor

  • Maina Maingi, Evan
  • Alonso Abad, María Pilar
  • Angurel, Luis A.
  • Rahman, Md. Ashiqur
  • Chapoulie, Rémy
  • Dubernet, Stéphan
  • Fuente, Germán F. de la
[EN] Stained-glass windows form an important part of cultural heritage. Short pulse lasers open new opportunities for safe decontamination. In this work, and for the first time, the interaction of sub-nanosecond and femtosecond pulsed lasers with some contemporary stained-glasses has been analyzed exploring their applicability to safely clean stained-glass windows. The results show that, in these materials, damage can be induced using energy levels below damage thresholds due to the heat accumulation in the coating layer that is being eliminated. The latter generates significant thermal stresses on the glass volume, which induce crack formation. In consequence, in order to apply safe stained-glass cleaning protocols, laser parameters have to be selected to control the temperature increase within this layer. To achieve the latter goal, two alternative irradiation procedures were explored in this work. As a first option, a reduction of the effective pulse repetition frequency to values lower than 20 kHz was applied. A second alternative was used for lasers with pulse repetition rates in the hundreds of kHz. In this case, the burst mode was employed controlling the number of pulses emitted and combined with an adequate time lapse selection between two consecutive burst runs. A proof of concept demonstration was carried out on a stained-glass sample from the Cathedral of Cuenca, dated at the end of the XV century., [ES] Las vidrieras constituyen un elemento esencial de nuestro patrimonio cultural. Los láseres de pulsos ultracortos ofrecen nuevas oportunidades para desarrollar procesos de restauración seguros. En este trabajo, por primera vez, se estudia la interacción de láseres pulsados emitiendo pulsos en el rango de los subnanosegundos y femtosegundos con piezas de vidrieras contemporáneas, con el fin de explorar la posibilidad de desarrollar procesos seguros de restauración de vidrieras. Los resultados muestran que, en estos materiales, incluso trabajando con niveles de energía por debajo de los umbrales de daño, se puede generar deterioro por la acumulación de calor generada en la capa que se está eliminando, lo cual puede generar niveles de tensiones térmicas que provocan la ruptura del vidrio. Por tanto, para desarrollar protocolos de limpieza seguros, los parámetros de procesado deben escogerse de tal manera que se minimice la temperatura que se alcanza en esta capa. Se han explorado dos alternativas. Una es reducir la frecuencia de trabajo hasta valores por debajo de los 20 kHz. En el caso de láseres que trabajen a frecuencias más elevadas, la alternativa es trabajar en modo burst, limitando el número de pulsos en cada serie y estableciendo tiempos de espera entre dos series. Estas ideas se han aplicado sobre una pieza de vidriera de la Catedral de Cuenca de finales del siglo XV., This work was supported by European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement N.° 766311. Partial support is obtained from Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_20R). The use of Servicio General de Apoyo a la Investigación at the University of Zaragoza is acknowledged. This work has been performed in the framework of the Unidad Asociada de I+D+I al CSIC “Vidrio y Materiales del Patrimonio Cultural (VIMPAC)”, by INMA (CSIC-University of Zaragoza) and University of Burgos., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Application of ultrashort pulse lasers in the restoration of historical stainedglasses

  • Maina Maingi, Evan
  • Alonso Abad, María Pilar
  • Fuente, Germán F. de la
  • Dubernet, Stéphan
  • Chapoulie, Rémy
  • Vally, Elodie
  • Angurel, Luis A.
Resumen del trabajo presentado a la 13th International Conference on Lasers in the Conservation of Artworks, celebrada en Florence (Italia) del 12 al 16 de septiembre de 2022., This work has been supported by H2020MSCAITNEJD/EDARCHMAT action under the Marie SklodowskaCurie grant agreement No. 766311 and by Gobierno de Aragón (research group T54_20R)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Application of femtosecond UV laser for selective cleaning of archaeologically significant pleistocene bones

  • Rahman, Md. Ashiqur
  • Fuente, Germán F. de la
  • Carretero, José Miguel
  • Maina Maingi, Evan
  • Alonso Abad, María Pilar
  • Alonso Alcalde, Rodrigo
  • Chapoulie, Rémy
  • Schiavon, Nick
  • Angurel, Luis A.
Resumen del trabajo presentado a la 13th International Conference on Lasers in the Conservation of Artworks, celebrada en Florence (Italia) del 12 al 16 de septiembre de 2022., Project supported by H2020MSCAITNEJD/EDARCHMAT action funding under the Marie Skłodowska Curie grant agreement, No 766311 and by Gobierno de Aragón (research group T54_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Effects of FS laser irradiation on Batalha Monastery limestone

  • Ding, Y.
  • Fuente, Germán F. de la
  • Angurel, Luis A.
  • Schiavon, Nick
Resumen del trabajo presentado a la 13th International Conference on Lasers in the Conservation of Artworks, celebrada en Florence (Italia) del 12 al 16 de septiembre de 2022., Financial support of this work was provided by the European Union’s Horizon 2020 research and innovation program under the H2020MSCAITNEJD EDARCHMAT, grant agreement No 766311., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical and laser cleaning of corrosion encrustations on historical stained glass: A comparative study

  • Maina Maingi, Evan
  • Alonso Abad, María Pilar
  • Angurel, Luis A.
  • Fuente, Germán F. de la
  • Dubernet, Stéphan
  • Chapoulie, Rémy
  • Mellouët, Oriane
  • Vally, Elodie
This article belongs to the Special Issue Cleaning Strategies for Cultural Heritage., The aim of this research work was to conduct a comparative study on the effectiveness of the application of chemical cleaning versus laser cleaning in the removal of surface congruent dissolution products from a potash-lime–silica historical stained-glass sample. EDTA was selected as the chemical cleaning agent. Laser cleaning was performed using a 238 fs pulse UV (343 nm) laser. The comparative cleaning studies were carried out on a stained-glass piece supplied by the Maison Lorin Glass Restoration Workshop from Chartres, France. Given the complex nature, irregular thickness and heterogeneity of the encrustations found on the glass, the two cleaning approaches were carefully performed step by step, while monitoring the process using an optical microscope. Raman spectroscopy and field emission scanning electron microscopy were used to characterize the changes induced on the sample surface during the cleaning process. The results demonstrate that the two cleaning approaches were able to eliminate the outer surface dark layer associated with carbon compounds, as well as the external part of the white layer generated by the crystallization of salts, formed with the dissolved elements after a reaction with the air. A comparison of the advantages and disadvantages of each method is also presented., This research was funded by the H2020-MSCA-ITN-EJD/ED-ARCHMAT action under the Marie Sklodowska-Curie grant agreement No. 766311. The authors acknowledge the partial support obtained from Gobierno de Aragón (research group T54_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrashort pulsed Femtosecond UV laser for selective cleaning of significant Cretaceous flints

  • Rahman, Md. Ashiqur
  • Fuente, Germán F. de la
  • Carretero, José Miguel
  • Alonso Abad, María Pilar
  • Navazo Ruiz, Marta
  • Alonso Alcalde, Rodrigo
  • Chapoulie, Rémy
  • Schiavon, Nick
  • Angurel, Luis A.
This work reports on studies aimed to evaluate the utilization of ultrashort 238 fs (fs) pulsed UV laser emission at 343 nm for eliminating colored crusts and surface deposits on significant Cretaceous flint surfaces, in an attempt to safeguard its aesthetic appearance and archaeological value. The results indicate that fs UV lasers may be an ideal, non-contact tool for selective surface cleaning of sensitive archaeological artefacts, since they enable contaminant desorption while avoiding photothermal damage., Project supported by H2020-MSCA-ITN-EJD/ED-ARCHMAT funding under the Marie Skłodowska-Curie Actions grant agreement, No. 766311 and by Gobierno de Aragón (research group T54_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultra-short pulse laser cleaning of contaminated pleistocene bone: A comprehensive study on the influence of pulse duration and wavelength

  • Rahman, Md. Ashiqur
  • Fuente, Germán F. de la
  • Carretero, José Miguel
  • Alonso Abad, María Pilar
  • Alonso Alcalde, Rodrigo
  • Chapoulie, Rémy
  • Schiavon, Nick
  • Angurel, Luis A.
This article belongs to the Special Issue Cleaning Strategies for Cultural Heritage., The impact of wavelength and pulse duration in laser cleaning of hard blackish contaminants crust from archaeologically significant Pleistocene bone is investigated in this research. The objective is to determine the practical cleaning procedures and identify adequate laser parameters for cleaning archaeological bone from Sima de los Huesos (Spain) based on conservation and restoration perspectives. Bone surface cleaning was performed utilizing two Q-switched Nd:YAG lasers: sub-nanosecond pulsed lasers with emission wavelengths at 355 nm and 1064 nm, respectively, and a Yb:KGW femtosecond pulsed laser with an emission wavelength in the third harmonic at 343 nm. In all experiments, the laser beam scanning mode was applied to measure cleaning efficiency in removing contaminants and degradation products while assessing the underlying substrate surface damage. Several properties, including wavelength-dependent absorption, pulse repetition rate, and thermal properties of the material, are analyzed when evaluating the ability of these lasers to boost the cleaning efficiency of the deteriorated bone surface. Bone surface morphology and composition were studied and compared before and after laser irradiation, using Optical Microscopy, Scanning Electron Microscopy with Energy Dispersive X-ray Spectrometry (SEM-EDS), Fourier Transform Infrared Spectroscopy (FTIR), and X-ray Photoelectron Spectroscopy (XPS) characterization methods. The results indicate that 238-femtosecond UV laser irradiation with 2.37 TWcm−2 is significantly safer and more efficient toward surface contaminant desorption than sub-nanosecond laser irradiation. The results herein presented suggest that these types of fs lasers may be considered for realistic laser conservation of valuable historic and archaeological museum artifacts., This research was funded by the H2020-MSCA-ITN-EJD/ED-ARCHMAT action funding under the Marie Skłodowska-Curie grant agreement, No 766311., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

UV femtosecond laser cleaning of encrusted historical stained-glasses

  • Maina Maingi, Evan
  • Alonso Abad, María Pilar
  • Fuente, Germán F. de la
  • Dubernet, Stéphan
  • Lefrais, Yannick
  • Chapoulie, Rémy
  • Vally, Elodie
  • Angurel, Luis A.
Laser irradiation enables the removal of unwanted surface deposits from different materials in a safe and controllable manner. Laser parameters should be carefully selected to achieve the removal of the target contaminants without inducing damage to the substrate. Ultra-short pulse lasers have opened new opportunities for safe and controlled decontamination of cultural heritage materials because the thickness of material that is affected by the laser is limited. In this study, an ultraviolet femtosecond pulsed laser was used for the removal of unwanted encrustation formed on the surface of an historical colourless stained-glass sample from the Cuenca Cathedral in Spain. One of the sides of this glass exhibits a reddish-brown grisaille that also has to be preserved. A laser cleaning process has been designed to avoid heat accumulation while controlling the thickness of ablated material. In this context, a multi-step process was selected in order to be able to eliminate, in a controlled way, the crust layer without damaging the grisaille layer, or the glass substrate. In this case, laser irradiation in beam scanning mode with a pulse repetition frequency of 10 kHz proved to be effective for the safe cleaning of the glass. The latter was analysed before and after laser cleaning by optical and confocal microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray fluorescence, and Raman spectroscopy, confirming that the crust layer was effectively eliminated without damaging the surface., This work was supported by H2020-MSCA-ITN-EJD/ED-ARCHMAT action under the Marie Sklodowska-Curie grant agreement no. 766311. Partial support is obtained from Gobierno de Aragón (research group T54_20R). The use of Servicio General de Apoyo a la Investigación at the University of Zaragoza is acknowledged. This work has been performed in the framework of the Unidad Asociada de I+D+I al CSIC “Vidrio y Materiales del Patrimonio Cultural (VIMPAC)”, by INMA (CSIC-University of Zaragoza) and University of Burgos., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Ultrashort pulsed Femtosecond UV laser for selective cleaning of significant Cretaceous flints

  • Rahman, Md. Ashiqur
  • Fuente Leis, Germán F. de la
  • Carretero Díaz, José Miguel
  • Alonso Abad, Mª Pilar
  • Navazo Ruiz, Marta
  • Alonso Alcalde, Rodrigo
  • Chapoulie, Rémy
  • Schiavon, Nick
  • Angurel Lámban, Luis Alberto
This work reports on studies aimed to evaluate the utilization of ultrashort 238 fs (fs) pulsed UV laser emission at 343 nm for eliminating colored crusts and surface deposits on significant Cretaceous flint surfaces, in an attempt to safeguard its aesthetic appearance and archaeological value. The results indicate that fs UV lasers may be an ideal, non-contact tool for selective surface cleaning of sensitive archaeological artefacts, since they enable contaminant desorption while avoiding photothermal damage., Project supported by H2020-MSCA-ITN-EJD/ED-ARCHMAT funding under the Marie Skłodowska-Curie Actions grant agreement, No. 766311 and by Gobierno de Aragón (research group T54_20R).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Tesis doctoral (DoctoralThesis)

Laser based intervention on historical stained-glasses

  • Maingi, Evan Maina
Los láseres de pulso ultracorto han abierto nuevas oportunidades para la descontaminación segura y controlada de los materiales del patrimonio cultural. Este tipo de láseres son controlables, seguros bajo ciertas condiciones de uso y amigables con el medio ambiente, entre otras ventajas. En este trabajo se utilizaron láseres de pulsos ultracortos en el desarrollo de protocolos de limpieza con láser utilizando una serie de vidrieras contemporáneas que se utilizan frecuentemente en restauración; Uno de los objetivos es explorar la aplicabilidad del uso de estos láseres para eliminar de forma segura las incrustaciones de las vidrieras históricas. Se diseñaron protocolos de limpieza con láser que permitieron la eliminación segura y eficaz de las incrustaciones de la superficie del vidrio. Los protocolos establecidos se aplicaron con éxito en la limpieza láser de las vidrieras históricas de la Catedral de Cuenca (España) y la Catedral de Chartres (Francia) sin inducir daño a la capa de grisalla ni al sustrato de vidrio., Ultra-short pulse lasers have opened up new opportunities for safe and controlled decontamination of cultural heritage materials. These types of lasers are controllable, safe under certain condition of use and are environmentally friendly among other advantages. In this work, ultra-short pulsed lasers were utilized in the development of laser cleaning protocols using a series of contemporary stained-glasses frequently used in restoration; one of the objectives being to explore the applicability of using these lasers to safely remove encrustations formed on historical stained-glass windows. Laser cleaning protocols were designed that allowed safe and effective removal of encrustations from the glass surface. The established protocols were successfully applied in the laser cleaning of historical stained-glass windows from Cuenca cathedral (Spain) and Chartres cathedral (France) without inducing damage to the grisaille layer or on the glass substrate., I also express my gratitude for the funding support from H2020-MSCA-ITN-EJD/EDARCHMAT action under the Marie Sklodowska-Curie grant agreement No. 766311. For the partial support obtained from Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_20R) and for the availability and the use of the Servicio General de Apoyo a la Investigación at the University of Zaragoza. Also to mention and thank the team working under the framework of the Unidad Asociada de I+D+I al CSIC “Vidrio y Materiales del Patrimonio Cultural (VIMPAC)”, INMA (CSIC-University of Zaragoza) and the University of Burgos as well as the team at the Université Bordeaux Montaigne France for all the support.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Tesis doctoral (DoctoralThesis)

Laser based intervention in archaeological materials and museum artifacts

  • Rahman, Md. Ashiqur
La tecnología láser ha evolucionado rápidamente en las últimas décadas, proporcionando sistemas láser recientemente desarrollados, que son capaces de emitir en una diversidad de longitudes de onda, potencias y duraciones de pulso. Además, los láseres modernos se están volviendo compactos en tamaño y, en muchos casos, portátiles o transportables y sin refrigerante líquidos, lo que allana el camino para su pleno aprovechamiento en muchas aplicaciones, incluidas las que afectan a la restauración del Patrimonio cultural (PC) y la conservación de piezas de museos arqueológicos. Incluso hace tiempo los láseres eran más intensivos, muchos menos compactos y con unas características de emission alejadas de las que ofrecen hoy en día; aparecieron muchos ejemplos en la historiografía y en la restauración de monumentos, demostrando su potencial en el campo del PC. Aunque hoy en día los láseres son objeto de muchos trabajos publicados sobre diferentes piezas arqueológicas y del PC, su uso en estos campos aún necesita más atención y mejoras, particularmente en vista de sus últimos avances tecnológios. En esencia, las últimas ventajas pueden allanar el camino para establecer protocolos de limpieza con láser más seguros que puedan ser fáciles de implementar para la conservación efectiva de superficies frágiles y sensibles. Este trabajo de tesis revisa una amplia gama de aplicaciones de limpieza láser y los regímenes de interacción láser-material que las acompañan y que pueden afectar a la conservación de huesos, piedras, cerámicas y objetos de hierro arqueológicos, en un intento de centrarse en las técnicas metodológicas utilizadas para abordar los desafíos típicos de la limpieza. Dado que a menudo se ha encontrado que los hallazgos publicados son inconsistentes entre sí, se han identificado dificultades para hacer coincidir la idoneidad de un procedimiento de limpieza con láser, con un tipo específico de pieza, lo que sugiere que los resultados de la limpieza con láser dependen del caso. Los parámetros de irradiación láser controlados que utilizan tecnología láser pulsada de femtosegundos (fs) y subnanosegundos desarrollada recientemente con una longitud de onda de emisión en los regímenes de infrarrojo cercano (1030 nm. 1064 nm), visible (515 nm) y ultravioleta (343 nm. 355 nm) han sido evaluados en piezas arqueológicas desenterradas en varios yacimientos arqueológicos de la Sierra de Arapuerca (Burgos, España). Los valores de umbral de ablación, daño y limpieza en modo de pulso de ráfaga y esacaneo de haz se han identificado en la eliminación de contaminantes y productos de degradación mientras se evalúa el daño de la superficie del sustrato subyacente. También se ha explorado el impacto de la longitud de onda y la duración del pulso para optimizar los parámetros de emission del láser, localizando así su interacción dentro de la superficie más externa del sustrato. La longitud de onda (no se ha estudiado este tipo de fenómenos, solo se ha observado el efecto de diferentes longitudes de onda), la irradiancia y la tasa de repetición de pulsos fieron algunos de los parámetros considerados para evaluar el potencial que ofrecen estos tipos de láser para una mayor eficiencia de limpieza. La microstopía óptica (OM), las cámaras térmicas infrarrojas (IR), la mocroscopía electronica de barrido con espectrometría de rayos X de dispersion de energía (SEM-EDS), la espectroscopía de fotoelectrones de rayos X (XPS), la espectroscopía infrarroja transformada de Fourier (FTIR) y la difractometría de rayos X (XRD) se han utilizado para caracterizar las piezas contaminadas antes y después del tratamiento con láser, mientras se evaluaba el grado de daño producido en la superficie de la pieza original. El estudio revela la capacidad de diferentes láseres en la conservación con éxito de las piezas, lo que indica su capacidad para eliminar material no deseado con precision a nanoescala, al mismo tiempo que proporciona un control sobre la profundidad de la ablación, evitando la acumulación de calor, las transformaciones físicoquímicas y el daño mecánico a las capas subyacentes. El láser pulsado ultrarrápido de femtosegundos en diferentes longitudes de onda, adaptado a una variedad de problemas de eliminación de contaminantes, parece ofrecer soluciones atractivas basadas en la selección adecuada de la intensidad del láser y su distribución temporal y especial para gestionar las interacciones láser-pieza. En esencia, se ha propuesto un protocolo de limpieza láser específico para cada tipo de superficie de pieza limpiada con láser, debido a la capacidad de control de los parámetros de irradiación láser y los resultados de los estudios físicoquímicos y de microestructura mediante los cuales se caracterizaron adecuadamente los cambios en la irradiación láser. Los descubrimientos de este trabajo de tesis resaltan la importancia de evaluar sistemáticamente los resultados de limpieza para desarrollar procedimientos de limpieza láser más efecivos, operativos y seguros. Se espera que estos brinden a los conservadores/ restauradores información muy útil sobre el uso mejorado de los láseres para la preservación de piezas históricamente relevantes. Además, este trabajo sirve como un valioso punto de partida para los especialistas en conservación que tienen la intención de investigar más sobre la limpieza de piezas históricas con láser. La presente tesis finaliza con una serie de casos de estudio que podrían desarrollarse en un futuro próximo para lograr una limpieza mejorada para la conservación de piezas arqueológicas y del patrimonio cultural., Laser technology has evolved rapidly over the last decades, providing newly developed laser systems which are capable of emitting in a diversity of wavelengths, powers and pulse durations. In addition, modern lasers are becoming compact in size and, in many cases, portable or transportable and without liquid refrigerants, which paves the way for their full exploitation in many applications, including those which affect restoration of Cultural Heritage (CH) and preservation of Archaeological museum artifacts. Even at the time lasers were more intensive, much less compact and with emission characteristics far from what they offer today, many examples appeared in the literature, and in restoration of monuments, demonstrating their potential in the CH field. Although nowadays lasers are the subject of many published works on different archaeological and CH artifacts, their use in these fields still needs more attention and further improvements, particularly in view of their latest technological advances. In essence, the latter advantages may pave the way to safer laser cleaning protocols that may be easy to implement for the effective conservation of fragile and sensitive surfaces. This thesis work reviews a wide range of laser cleaning applications and the accompanying laser-material interaction regimes that may affect the conservation of archaeological bones, stones, ceramics and iron objects, in an attempt to focus on the methodological techniques used to address typical cleaning challenges. Since published findings have been often found to be inconsistent with each other, difficulties were identified in matching the suitability of a laser cleaning procedure with a specific type of artifact, suggesting that laser cleaning outcomes are case-dependent. Controlled laser irradiation parameters using recently developed femtosecond (fs) and sub-nanosecond pulsed laser technology with an emission wavelength in the near Infrared (1030 nm, 1064 nm), visible (515 nm) and Ultraviolet (343 nm, 355 nm) regimes have been assessed on selected archaeological artifacts unearthed from several archaeological sites of Sierra de Atapuerca (Burgos, Spain). The ablation, damage and cleaning threshold values in burst pulse and beam scanning mode have been identified in removing contaminants and degradation products while assessing the underlying substrate surface damage. The impact of wavelength and pulse duration has also been explored to optimize the laser's emission parameters, thus localizing its interaction within the outermost surface of the substrate. Wavelength, irradiance and pulse repetition rate were among the parameters considered to evaluate the potential that these types of lasers offer towards an increased cleaning efficiency. Optical Microscopy (OM), Infrared (IR) Thermal Cameras, Scanning Electron Microscopy with Energy Dispersive X-ray Spectrometry (SEM-EDS), X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared Spectroscopy (FTIR), and X-ray Diffractometry (XRD) were used to characterize the contaminated artifacts before and after the laser treatment, while evaluating the degree of damage produced to the original artifact's surface. The study reveals the capability of different lasers in the successful conservation of artifacts, indicating their ability to remove unwanted material with nanoscale precision, while providing control over ablation depth, avoiding heat accumulation, physicochemical transformations, and mechanical damage to the underlayers. The ultrafast femtosecond pulsed laser in different wavelengths, adapted to a variety of contaminant removal problems, appears to offer attractive solutions based on proper selection of laser intensity and its temporal and spatial distribution to manage laser-artifact interactions. In essence, a specific laser cleaning protocol was proposed concerning each laser cleaned artifact surface, owing to the controllability of laser irradiation parameters and the results from physico-chemical and microstructure studies whereby changes upon laser irradiation were properly characterized. The findings from this thesis work highlight the importance of systematically assessing the cleaning outcomes to develop more effective, operative and safer laser cleaning procedures. It is hoped that these will provide conservators/restorers with very useful information on the improved use of lasers for the preservation of historically relevant artifacts. In addition, this work serves as a valuable beginning point for conservation specialists who intend to do more research on the laser cleaning of ancient artifacts. The current thesis finishes with a number of case studies that might be pursued in the near future to achieve improved cleaning for the preservation of archaeological and cultural heritage objects., At last, I feel pleasure to acknowledge the ED-ARCHMAT project, supported by H2020-MSCA-ITNEJD/ED-ARCHMAT action funding under the Marie Skłodowska-Curie grant agreement, No 766311. Partial support obtained from Departamento de Ciencia, Universidad y Sociedad del Conocimiento of Gobierno de Aragón (research group T54_20R). The Atapuerca research project is financed by Ministerio de Ciencia, Innovación y Universidades project PGC 2018-093925-B-C33. Fieldwork at the Atapuerca sites is funded by the Junta de Castilla y León and the Fundación Atapuerca. The archaeological materials presented in this work was made available by the Laboratory of Human Evolution of the University of Burgos, in close collaboration with the "Colección Museística de Castilla y León" of the Junta de Castilla y León, and Museo de la Evolución Humana (Burgos); we acknowledge Professor Juan Luis Arsuaga for the permit to analyze the sample. The use of Servicio General de Apoyo a la Investigación and the National Facility ELECMI ICTS, node "Laboratorio de Microscopías Avanzadas" at the University of Zaragoza is acknowledged. This work is part of the ongoing collaboration between INMA (CSIC-University of Zaragoza) and University of Burgos, under the auspices of Unidad Asociada de I+D+I al CSIC “Vidrio y Materiales del Patrimonio Cultural (VIMPAC)”.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sub-ns-pulsed laser cleaning of an archaeological bone from the Sierra de Atapuerca, Spain: a case study

  • Rahman, M.A.
  • de la Fuente, G.F.
  • Carretero, J.M.
  • Maingi, E.M.
  • Alonso Abad, M.P.
  • Alonso Alcalde, R.
  • Chapoulie, R.
  • Schiavon, N.
  • Angurel, L.A.
Controlled laser irradiation parameters using recently developed sub-nanosecond pulsed laser technology with emission wavelength in the near Infrared regime (1064 nm) have been assessed on a Pleistocene bone from the archaeological site of Sierra de Atapuerca, Spain. Burst pulse mode was employed to explore contaminant removal efficiency, while at the same time, assessing the degree of damage produced to the underlying original substrate surface. The surface morphology and composition of the deteriorated bone have been characterized, along with the effects of laser irradiation at 1064 nm, using Optical Microscopy (OM), Scanning Electron Microscopy-with Energy Dispersive X-ray Spectrometry (SEM-EDS), and X-ray Photoelectron Spectroscopy (XPS). The most effective laser cleaning parameters in burst mode have been identified in order to optimize the emission parameters of the laser, thus localizing its interaction within the outermost layers of contaminants and degradation products, avoiding damage to the underlying original bone surface. Hence, threshold cleaning and substrate damage values have been determined for this new sub-ns laser, paving the way to safer laser cleaning procedures that may be useful for the effective conservation of bone archaeological artifacts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ultrashort pulsed Femtosecond UV laser for selective cleaning of significant Cretaceous flints

  • Rahman, Md. Ashiqur
  • Fuente Leis, Germán Francisco de la
  • Carretero, José Miguel
  • Alonso Abad, Mª Pilar
  • Ruiz Navazo, Marta
  • Alonso Alcalde, Rodrigo
  • Chapoulie, Rémy
  • Schiavon, Nick
  • Angurel, Luis A.
This work reports on studies aimed to evaluate the utilization of ultrashort 238 fs (fs) pulsed UV laser emission at 343 nm for eliminating colored crusts and surface deposits on significant Cretaceous flint surfaces, in an attempt to safeguard its aesthetic appearance and archaeological value. The results indicate that fs UV lasers may be an ideal, non-contact tool for selective surface cleaning of sensitive archaeological artefacts, since they enable contaminant desorption while avoiding photothermal damage.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemical and laser cleaning of corrosion encrustations on historical stained glass: a comparative study

  • Maingi, E. M.
  • Alonso, M. P.
  • Angurel, L. A.
  • de la Fuente, G. F.
  • Dubernet, S.
  • Chapoulie, R.
  • Mellouët, O.
  • Vally, E.
The aim of this research work was to conduct a comparative study on the effectiveness of the application of chemical cleaning versus laser cleaning in the removal of surface congruent dissolution products from a potash-lime–silica historical stained-glass sample. EDTA was selected as the chemical cleaning agent. Laser cleaning was performed using a 238 fs pulse UV (343 nm) laser. The comparative cleaning studies were carried out on a stained-glass piece supplied by the Maison Lorin Glass Restoration Workshop from Chartres, France. Given the complex nature, irregular thickness and heterogeneity of the encrustations found on the glass, the two cleaning approaches were carefully performed step by step, while monitoring the process using an optical microscope. Raman spectroscopy and field emission scanning electron microscopy were used to characterize the changes induced on the sample surface during the cleaning process. The results demonstrate that the two cleaning approaches were able to eliminate the outer surface dark layer associated with carbon compounds, as well as the external part of the white layer generated by the crystallization of salts, formed with the dissolved elements after a reaction with the air. A comparison of the advantages and disadvantages of each method is also presented.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

UV femtosecond laser cleaning of encrusted historical stained-glasses

  • Maingi, E. M.
  • Alonso, M. P.
  • Fuente, Germán F. de la
  • Dubernet, S.
  • Lefrais, Y.
  • Chapoulie, R.
  • Vally, E.
  • Angurel, L. A.
Laser irradiation enables the removal of unwanted surface deposits from different materials in a safe and controllable manner. Laser parameters should be carefully selected to achieve the removal of the target contaminants without inducing damage to the substrate. Ultra-short pulse lasers have opened new opportunities for safe and controlled decontamination of cultural heritage materials because the thickness of material that is affected by the laser is limited. In this study, an ultraviolet femtosecond pulsed laser was used for the removal of unwanted encrustation formed on the surface of an historical colourless stained-glass sample from the Cuenca Cathedral in Spain. One of the sides of this glass exhibits a reddish-brown grisaille that also has to be preserved. A laser cleaning process has been designed to avoid heat accumulation while controlling the thickness of ablated material. In this context, a multi-step process was selected in order to be able to eliminate, in a controlled way, the crust layer without damaging the grisaille layer, or the glass substrate. In this case, laser irradiation in beam scanning mode with a pulse repetition frequency of 10 kHz proved to be effective for the safe cleaning of the glass. The latter was analysed before and after laser cleaning by optical and confocal microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray fluorescence, and Raman spectroscopy, confirming that the crust layer was effectively eliminated without damaging the surface.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ultra-Short Pulse Laser Cleaning of Contaminated Pleistocene Bone: A Comprehensive Study on the Influence of Pulse Duration and Wavelength

  • Rahman, Md. Ashiqur
  • de la Fuente, Germán F.
  • Miguel Carretero, José
  • Abad, Mª Pilar Alonso
  • Alcalde, Rodrigo Alonso
  • Chapoulie, Rémy
  • Schiavon, Nick
  • Angurel, Luis A.
The impact of wavelength and pulse duration in laser cleaning of hard blackish contaminants crust from archaeologically significant Pleistocene bone is investigated in this research. The objective is to determine the practical cleaning procedures and identify adequate laser parameters for cleaning archaeological bone from Sima de los Huesos (Spain) based on conservation and restoration perspectives. Bone surface cleaning was performed utilizing two Q-switched Nd:YAG lasers: sub-nanosecond pulsed lasers with emission wavelengths at 355 nm and 1064 nm, respectively, and a Yb:KGW femtosecond pulsed laser with an emission wavelength in the third harmonic at 343 nm. In all experiments, the laser beam scanning mode was applied to measure cleaning efficiency in removing contaminants and degradation products while assessing the underlying substrate surface damage. Several properties, including wavelength-dependent absorption, pulse repetition rate, and thermal properties of the material, are analyzed when evaluating the ability of these lasers to boost the cleaning efficiency of the deteriorated bone surface. Bone surface morphology and composition were studied and compared before and after laser irradiation, using Optical Microscopy, Scanning Electron Microscopy with Energy Dispersive X-ray Spectrometry (SEM-EDS), Fourier Transform Infrared Spectroscopy (FTIR), and X-ray Photoelectron Spectroscopy (XPS) characterization methods. The results indicate that 238-femtosecond UV laser irradiation with 2.37 TWcm−2 is significantly safer and more efficient toward surface contaminant desorption than sub-nanosecond laser irradiation. The results herein presented suggest that these types of fs lasers may be considered for realistic laser conservation of valuable historic and archaeological museum artifacts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Historical stained-glass window laser preservation: The heat accumulation challenge

  • Maingi, E. M.
  • Alonso, M. P.
  • Angurel, L. A.
  • Rahman, M. A.
  • Chapoulie, R.
  • Dubernet, S.
  • de la Fuente, G. F.
Stained-glass windows form an important part of cultural heritage. Short pulse lasers open new opportunities for safe decontamination. In this work, and for the first time, the interaction of sub-nanosecond and femtosecond pulsed lasers with some contemporary stained-glasses has been analyzed exploring their applicability to safely clean stained-glass windows. The results show that, in these materials, damage can be induced using energy levels below damage thresholds due to the heat accumulation in the coating layer that is being eliminated. The latter generates significant thermal stresses on the glass volume, which induce crack formation. In consequence, in order to apply safe stained-glass cleaning protocols, laser parameters have to be selected to control the temperature increase within this layer. To achieve the latter goal, two alternative irradiation procedures were explored in this work. As a first option, a reduction of the effective pulse repetition frequency to values lower than 20 kHz was applied. A second alternative was used for lasers with pulse repetition rates in the hundreds of kHz. In this case, the burst mode was employed controlling the number of pulses emitted and combined with an adequate time lapse selection between two consecutive burst runs. A proof of concept demonstration was carried out on a stained-glass sample from the Cathedral of Cuenca, dated at the end of the XV century. © 2021 SECV