Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

TECNALIA Publications
Publicación Contribución de congreso (ConferenceOutput)

Geo-Fence Based Route Tracking Diagnosis Strategy for Energy Prediction Strategies Applied to EV

  • Prieto, P.
  • Trancho, E.
  • Arteta, B.
  • Parra, A.
  • Coupeau, A.
  • Cagigas, D.
  • Ibarra, E.
Nowadays, the shortage of energy and environmental pollution are considered as relevant problems due to the high amount of traditional automotive vehicles with internal combustion engines (ICEs). Electric vehicle (EV) is one of the solutions to localize the energy source and the best choice for saving energy and provide zero emission vehicles. However, their main drawback when compared to conventional vehicles is their limited energy storage capacity, resulting in poor driving ranges. In order to mitigate this issue, the scientific community is extensively researching on energy optimization and prediction strategies to extend the autonomy of EV. In general, such strategies require the knowledge of the route profile, being of capital importance to identify whether the vehicle is on route or not. Considering this, in this paper, a route tracking diagnosis strategy is proposed and tested. The proposed strategy relies on the information provided by the Google Maps API (Application Programming Interface) to calculate the vehicles reference route. Additionally, a Global Positioning System (GPS) device is used to monitor the real vehicle position. The proposed strategy is validated throughout simulation, Driver in the Loop (DiL) test and experimental tests.
TECNALIA Publications
Publicación Artículo científico (JournalArticle)

On pre-emptive vehicle stability control

  • Parra, Alberto
  • Tavernini, Davide
  • Gruber, Patrick
  • Sorniotti, Aldo
  • Zubizarreta, Asier
  • Pérez, Joshué
Future vehicle localisation technologies enable major enhancements of vehicle dynamics control. This study proposes a novel vehicle stability control paradigm, based on pre-emptive control that considers the curvature profile of the expected path ahead in the computation of the reference direct yaw moment and braking control action. The additional information allows pre-emptive trail braking control, which slows down the vehicle if the predicted speed profile based on the current torque demand is deemed incompatible with the reference trajectory ahead. Nonlinear model predictive control is used to implement the approach, in which also the steering angle and reference yaw rate provided to the internal model are varied along the prediction horizon, to account for the expected vehicle path. Two pre-emptive stability control configurations with different levels of complexity are proposed and compared with the passive vehicle, and two state-of-the-art nonlinear model predictive stability controllers, one with and one without non-pre-emptive trail braking control. The performance is assessed along obstacle avoidance tests, simulated with a high-fidelity model of an electric vehicle with in-wheel motors. Results show that the pre-emptive controllers achieve higher maximum entry speeds – up to ∼34% and ∼60% in high and low tyre-road friction conditions – than the formulations without preview.
TECNALIA Publications
Publicación Contribución de congreso (ConferenceOutput)

A Speed Planner Approach Based On Bézier Curves Using Vehicle Dynamic Constrains and Passengers Comfort

  • Lattarulo, Ray
  • Marti, Enrique
  • Marcano, Mauricio
  • Matute, Jose
  • Perez, Joshue
This paper presents a speed profile generation approach for longitudinal control of automated vehicles, based on quintic Bézier curves. The described method aims to increase comfort level of passengers based on the ISO2631-1 specification, while taking into account vehicle dynamics and traffic rules to keep high safety levels. The algorithm has been tested in an in-house tool for high accuracy vehicle dynamics simulations, called Dynacar. The considered scenario is a closed circuit inside Tecnalia facilities. The resulting profile has better properties (for example, rate of change) than a raw input based on traffic speed limits. When used as reference for the speed controller, it improves both comfort and safety.
TECNALIA Publications
Publicación Contribución de congreso (ConferenceOutput)

Route tracking diagnosis algorithm for EV energy prediction strategies

  • Prieto, P.
  • Trancho, Elena
  • Arteta, B.
  • Parra, A.
  • Coupeau, A.
  • Cagigas, D.
  • Ibarra, E.
Current pollution issues generated by internal com bustion engine (ICE) based vehicles have lead to their progressive introduction of electrified transport systems. However, their main drawback is their poor autonomy when compared to conventional vehicles. In order to mitigate this issue, the scientific community is extensively researching on energy optimization and prediction strategies to extend the autonomy of electric vehicles (EV). In general, such strategies require the knowledge of the route profile, being of capital importance to identify whether the vehicle is on route or not. Considering this, in this paper, a geo-fence based route tracking diagnosis strategy is proposed and tested. The proposed strategy relies on the information provided by the Google Maps API (Application Programming Interface) to calculate the vehicles reference route. Additionally, a Global Positioning System (GPS) device is used to monitor the real vehicle position. The proposed strategy is validated throughout simulation and experimental tests.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

On pre-emptive vehicle stability control

  • Parra Delgado, Alberto
  • Tavernini, Davide
  • Gruber, Patrick
  • Sorniotti, Aldo
  • Zubizarreta Pico, Asier
  • Pérez Rastelli, Joshue Manuel
[EN] Future vehicle localisation technologies enable major enhancements of vehicle dynamics control. This study proposes a novel vehicle stability control paradigm, based on pre-emptive control that considers the curvature profile of the expected path ahead in the computation of the reference direct yaw moment and braking control action. The additional information allows pre-emptive trail braking control, which slows down the vehicle if the predicted speed profile based on the current torque demand is deemed incompatible with the reference trajectory ahead. Nonlinear model predictive control is used to implement the approach, in which also the steering angle and reference yaw rate provided to the internal model are varied along the prediction horizon, to account for the expected vehicle path. Two pre-emptive stability control configurations with different levels of complexity are proposed and compared with the passive vehicle, and two state-of-the-art nonlinear model predictive stability controllers, one with and one without non-pre-emptive trail braking control. The performance is assessed along obstacle avoidance tests, simulated with a high-fidelity model of an electric vehicle with in-wheel motors. Results show that the pre-emptive controllers achieve higher maximum entry speeds – up to ∼34% and ∼60% in high and low tyre-road friction conditions – than the formulations without preview., This work was supported in part by the Horizon 2020 Framework Programme of the European Commission under grant agreements no. 769944 (STEVE project) and no. 824311 (ACHILES project).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

On Nonlinear Model Predictive Control for Energy-Efficient Torque-Vectoring

  • Parra Delgado, Alberto
  • Tavernini, Davide
  • Gruber, Patrick
  • Sorniotti, Aldo
  • Zubizarreta Pico, Asier
  • Pérez Rastelli, Joshue Manuel
A recently growing literature discusses the topics of direct yaw moment control based on model predictive control (MPC), and energy-efficient torque-vectoring (TV) for electric vehicles with multiple powertrains. To reduce energy consumption, the available TV studies focus on the control allocation layer, which calculates the individual wheel torque levels to generate the total reference longitudinal force and direct yaw moment, specified by higher level algorithms to provide the desired longitudinal and lateral vehicle dynamics. In fact, with a system of redundant actuators, the vehicle-level objectives can be achieved by distributing the individual control actions to minimize an optimality criterion, e.g., based on the reduction of different power loss contributions. However, preliminary simulation and experimental studies - not using MPC - show that further important energy savings are possible through the appropriate design of the reference yaw rate. This paper presents a nonlinear model predictive control (NMPC) implementation for energy-efficient TV, which is based on the concurrent optimization of the reference yaw rate and wheel torque allocation. The NMPC cost function weights are varied through a fuzzy logic algorithm to adaptively prioritize vehicle dynamics or energy efficiency, depending on the driving conditions. The results show that the adaptive NMPC configuration allows stable cornering performance with lower energy consumption than a benchmarking fuzzy logic TV controller using an energy-efficient control allocation layer, This work was supported in part by the Horizon 2020 Programme of the European Commission under Grant Agreements 769944 (STEVE project) and 824311 (ACHILES project). The review of this article was coordinated by Dr. Dongpu Cao