Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Meta-analysis of CO2 conversion, energy efficiency, and other performance data of plasma-catalysis reactors with the open access PIONEER database

  • Salden, Antoine
  • Budde, Maik
  • García Soto, Carolina A.
  • Biondo, Omar
  • Barauna, Jairo
  • Faedda, Marzia
  • Musig, Beatrice
  • Fromentin, Chloé
  • Nguyen-Quang, Minh
  • Philpott, Harry
  • Hasrack, Golshid
  • Aceto, Domenico
  • Cai, Yuxiang
  • Azzolina Jury, Federico
  • Bogaerts, Annemie
  • Costa, Patrick da
  • Engeln, Richard
  • Gálvez Parruca, María Elena
  • Gans, Timo
  • García Martínez, Tomás
  • Guerra, Vasco
  • Henriques, Carlos
  • Motak, Monika
  • Navarro López, María Victoria
  • Parvulescu, Vasile I.
  • Van Rooij, Gerard
  • Samojeden, Bogdan
  • Sobota, Ana
  • Tosi, Paolo
  • Tu, Xin
  • Guaitella, Olivier
16 figures, 4 tables., This paper brings the comparison of performances of CO2 conversion by plasma and plasma-assisted catalysis based on the data collected from literature in this field, organised in an open access online database. This tool is open to all users to carry out their own analyses, but also to contributors who wish to add their data to the database in order to improve the relevance of the comparisons made, and ultimately to improve the efficiency of CO2 conversion by plasma-catalysis. The creation of this database and database user interface is motivated by the fact that plasma-catalysis is a fast-growing field for all CO2 conversion processes, be it methanation, dry reforming of methane, methanolisation, or others. As a result of this rapid increase, there is a need for a set of standard procedures to rigorously compare performances of different systems. However, this is currently not possible because the fundamental mechanisms of plasma-catalysis are still too poorly understood to define these standard procedures. Fortunately however, the accumulated data within the CO2 plasma-catalysis community has become large enough to warrant so-called “big data” studies more familiar in the fields of medicine and the social sciences. To enable comparisons between multiple data sets and make future research more effective, this work proposes the first database on CO2 conversion performances by plasma-catalysis open to the whole community. This database has been initiated in the framework of a H2020 European project and is called the “PIONEER DataBase”. The database gathers a large amount of CO2 conversion performance data such as conversion rate, energy efficiency, and selectivity for numerous plasma sources coupled with or without a catalyst. Each data set is associated with metadata describing the gas mixture, the plasma source, the nature of the catalyst, and the form of coupling with the plasma. Beyond the database itself, a data extraction tool with direct visualisation features or advanced filtering functionalities has been developed and is available online to the public. The simple and fast visualisation of the state of the art puts new results into context, identifies literal gaps in data, and consequently points towards promising research routes. More advanced data extraction illustrates the impact that the database can have in the understanding of plasma-catalyst coupling. Lessons learned from the review of a large amount of literature during the setup of the database lead to best practice advice to increase comparability between future CO2 plasma-catalytic studies. Finally, the community is strongly encouraged to contribute to the database not only to increase the visibility of their data but also the relevance of the comparisons allowed by this tool., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 813393. VG was partially funded by the Portuguese FCT-Fundação para a Ciência e a Tecnologia, under projects UIDB/50010/2020, UIDP/50010/2020 and PTDC/FIS- PLA/1616/2021., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information about The PIONEER database

  • Salden, Antoine
  • Budde, Maik
  • García Soto, Carolina A.
  • Biondo, Omar
  • Barauna, Jairo
  • Faedda, Marzia
  • Musig, Beatrice
  • Guaitella, Olivier
Data processing: Computed columns: By parsing the input data it is possible to increase the amount of columns in the database without changing the source format. The following columns are computed (or updated) in the back-end when the database is loaded from disk to memory.-- Assumptions for calculations: A number of parameters are (re)calculated based on provided metadata for publications: the residence time (1), the SEI in J L-1 (2), energy efficiency of CO2 conv. % (5) but also the frequency range column (section 8.1). Each of these calculations rely on data that potentially is given as a range of values, see section 1. By convention, the mean of the range is taken for each of the parameters. All entries for which a (re)calculation has been performed on either the x or y data, have the Calculated field set to ‘Calculated’ (rather than ‘Original’). Filtering the database on only Original data, this calculated data can be replaced with calculations by the user based on other aggregation, if desired. As mentioned for equation (2), the calculation that converts power (in W) to SEI (J L-1) simply relies on the gas flow rate Φ (in sccm or mLmin-1) and therefore does not take into account if Φ is defined w.r.t. standard conditions or the actual conditions in the discharge regarding pressure and temperature. Since generally in this case both the power and gas flux are know, the SEI can be calculated (except for batch reactors where there is no flow), which allows for a comparison between a larger body of experiments. Contrary to this, the calculations for the residence time (1) and energy efficiency of CO2 conversion both take into account the discharge conditions. This discrepancy is a conscious one: the SEI (in J L-1) is often reported as a macroscopic process parameter that is calculated from the power and fluxes put into the reactor. For τ res taking into account the conditions inside the plasma is paramount, since it can provide the information on how long a particle is exposed to plasma conditions. Do note that in lieu of the plasma –or active zone– volume, for some experiments an approximation such as the reactor volume is used, see column relevant volume in section 4. Likewise for the efficiency, it is important to account for the actual measurement conditions to establish the number of particles into which energy has been channelled. For in situ versus effluent conditions this can be very different. Overestimating the number density favourably improves efficiency, whilst an underestimation similarly negatively impacts it. While the way in which the PDB is structured and reports metadata is not without caveats (section 4.3 of the paper), the distinction between in- versus post-plasma dissociation measurements can be partially addressed by tailored filtering and aggregation of the data contained within.-- Normalisations: Several normalisation functions are available in the interface of the database. As described in the main text, the aim to provide a tool for easy calculation of normalised data within the same interface and compare with different data sets. For flexibility sake, a wide set of normalisations are provided, without restriction on whether they are sensible in a given context. The purpose of each normalised function is described briefly and summarised in table 1 along with the equations utilised.-- Under a Creative Commons license CC BY 4.0., The Pioneer database (PDB) is divided into two parts: performance data and metadata. The performance data originate from measurements reported in literature, where they are typically provided in form of plots or tables. The PDB and its dedicated online tool allow to compare large amounts of performance data to derive trends leading eventually to process optimisation. Performance data is provided in form of plain text files with only two comma-separated columns of numbers with a point (.) as decimal separator, without a header (as it is inferred from the metadata). The first column contains what is henceforth called process parameters. These are the independent variables of the experiments, i.e. the x-values like power, pressure etc., see section 7. The second column contains the so-called performance parameters. These are the dependent variables of the experiment, i.e. the y-values like conversion, selectivity etc., see section 7. The metadata contain additional information about the measurements that are crucial for their interpretation. Metadata are provided in table format following the template discussed subsequently. Before elaborating on the actual data input, the structure of the PDB metadata is discussed. The metadata is grouped thematically in categories. Within each category, information is entered into fields, i.e. the columns of the table. Essential and conditional fields are distinguished. Essential fields contain crucial information for the assessment of the plasma-catalytic process. In the best case scenario, all of them are given in the respective publication. When fields are listed in the description of a category from section 2 onward, essential fields are indicated by a regular bullet point (•). Conditional fields are by no means less important than essential ones, but can rather be left empty depending on other fields. For instance, most fields in the catalyst category are left empty, when no catalyst is used. Thus, conditional fields are meant to save time. Listed in the following, they are indicated by a plus (+). In conclusion, all fields are strongly recommended as data useful for valuable comparison with other work from the community. A subgroup of essential as well as conditional fields are those fields that contain the process parameters defined in the first paragraph of this section. Generally speaking, process parameters are the experimental settings in the pursuit of highest performance. The user of the PDB thus encounters process parameters on two occasions: on the one hand as typical x-values in the performance data and on the other hand as input to fields of the metadata. Hereafter, fields that contain process parameters and parameters are used synonymously. The total of fields belonging to the same measurement make up what is hereafter called a data set, corresponding to a row of the table. Note that here the input of data is addressed. In the back end, a data set is broken up into (x,y)-pairs for more flexibility in data handling. Data is exported also in that format. To ensure comparability, a template is used for inputting information into the PDB metadata. With respect to information entered, fields can be divided in numerical and textual fields. They are filled with numbers or text, respectively. For example, parameters are usually numerical fields. A numerical field contains either (i) one number x if the numerical value is known and does not change during the experiment; (ii) a range of values between xmin and xmax –given as array-like notation rxmin; xmaxs– if the numerical value is not exactly known, or when it changes in the course of the measurement; or (iii) NA if the numerical value is not known. For further use, an aggregate function is applied to array-like data to obtain a single number, by convention the mean. A textual field contains a string of text. There are a few instances where text can be entered freely as long as some format is followed. However, usually the field is filled by selecting from a pre-defined list of options in the template. Most of these lists are fixed but some might be extended in the future depending on the experimental data provided. This paragraph just gives a general overview. In the in-depth discussion of the fields of each category, it gets more clear what exactly is supposed to be filled in each field. The metadata of the PDB are divided into six categories • data identification • gas mixture • plasma source • catalyst • separation unit • output data, 1. General 2. Data Identification 3. Gas Mixture 4. Plasma Source 5. Catalyst 5.1 Catalyst Coupling . 5.2 Catalyst Composition 5.3 Catalyst Pre-treatment Before Reaction 5.4 Catalyst Conditions 5.5 Catalyst Characterization 6. Separation Unit 7. Output Data 8. Data processing 8.1 Computed columns 8.2 Assumptions for calculations 8.3 Normalisations, When data is reported according to the specified scheme above, the combined data and metadata can be read from disk and processed with some scripting. Most notably this performs data type coercion and extraction from a more flexible ‘human-readable’ format to a consistent, ‘machine-usable’ scheme. Some of the computed columns are redundant to some extent –the authyear column for instance is just a concatenation of the first author name and publication year (yyyy) columns– but these are provided for ease of filtering or grouping data, avoiding frequent (re)computation., This project has received funding from the European Unions Horizon 2020 research and innovation programme under the Marie Skodowska-Curie grant agreement No. 813393, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Nanostructured catalysts for plasma-assisted CO2 methanation, Catalizadores nanoestructurados para metanización de CO2 asistida por plasma, Catalyseurs nanostructurés pour la méthanisation du CO2 assistée par plasma

  • Musig, Beatrice
Work presented for the double degree of: Doctor por la Universidad de Zaragoza in the framework of the program of Ingeniería Química y del Medio Ambiente Diplôme naDonal de Doctorat de Sorbonne Université, specialité EnergéDque génie des procédés.-- It was read 20/10/2023, Sobresaliente Cum Laude., [EN] Among the different processes for carbon capture and utilisation, CO2 methanation is experiencing a renaissance as a promising technology for the development of Power-to-gas as an energy storage solution and carbon circular economy. The field of plasma catalysis, which considers the association of a catalyst with non-thermal plasma, has been recently developed for boosting CO2 methanation. The challenges of plasma catalysis focus on taking advantage of the activated species and electrons created by the plasma to achieve more favourable reaction pathways and interaction with the active sites of the catalyst and on plasma-catalyst synergy, meaning the enhancement of the catalyst properties by contact with plasma and vice versa. The goal of this work is to explore the effect of morphology and physicochemical properties of nanostructured Ni/CeO2 catalysts on plasma-catalyst synergy and to highlight the key characteristics of the catalysis that control an efficient plasma-assisted CO2 methanation in order to advance in the rational design of materials tailored for applications in plasma catalysis. For the plasma-assisted CO2 methanation tests, a suitable non-thermal plasma type is the dielectric barrier discharge due to mild temperature conditions, which allow the catalyst to be in direct contact with the plasma in a packed bed configuration, and operation at atmospheric pressure, promising for industrial applications. Nickel catalysts supported on Ce-based metal oxides have been proposed in recent publications for plasma-assisted CO2 methanation. Ni is a reliable solution as it is active for CO2 methanation as well as cost-effective. Cerium oxide (CeO2) is an interesting material to be used as support thanks to its redox properties related to the tendency to form oxygen vacancies. Such property can be tuned by enhancing the non-stoichiometric nature of the CeO2 surface, either by doping or, as in this case, by morphology modification, which has been reported for cerium oxide to be controllable via synthesis method. The parameters of the hydrothermal synthesis were varied and CeO2 nanomaterials with different morphology (polyhedra, nanorods, nanocubes), crystallite size, and surface area were produced. The Ni catalysts synthesised with these supports were further characterised by state-of-the-art techniques to examine the most relevant physicochemical properties, e.g., surface area, reducibility and metal-support interaction, surface basicity, and formation of oxygen vacancies. In addition, the electrical behaviour of the catalysts was assessed with focus on how the materials affect the plasma discharge, charge transfer, and the dielectric property of the packed bed. FTIR operando technique was utilised to suggest a possible reaction pathway of the plasma-assisted CO2 methanation on Ni/CeO2. In conclusion, it was found that the physicochemical properties which are relevant in conventional thermal methanation, such as surface area and basicity, are applicable to plasma catalysis but the importance of low dielectric permittivity of the catalyst and charge transfer mechanism was also highlighted for an energy efficient plasma-assisted methanation process. Furthermore, a rod or needle-like CeO2 support allows enhancing the surface defects, the interaction with Ni, and macroposority, which seem to facilitate the methanation reaction in plasma via formate route., [ES] Entre los diferentes procesos de captura y utilización del carbono, la metanización del CO2 experimenta últimamente un renacimiento como tecnología prometedora para el desarrollo de la conversión de electricidad en gas, del almacenamiento de energía y de la economía circular del carbono. El campo de la catálisis asistida por plasma, que considera la asociación de un catalizador con plasma no térmico, se ha desarrollado recientemente para impulsar la metanización de CO2. Los retos de esta tecnología se centran en aprovechar las especies activadas y los electrones para conseguir vías de reacción e interacción más favorables con los sitios activos del catalizador y en la sinergia plasma-catalizador, es decir, la mejora de las propiedades del catalizador por contacto con el plasma y viceversa. El objetivo de este trabajo es explorar el efecto de la morfología y las propiedades físicoquímicas de los catalizadores de Ni/CeO2 nanoestructurados en la sinergia plasma-catalizador y resaltar las características clave del catalizador que controlan una eficiente metanación de CO2 asistida por plasma con el fin de avanzar en el diseño de materiales para aplicaciones en plasma catálisis. Para los experimentos de metanación de CO2 asistida por plasma, un tipo de plasma no térmico adecuado es la descarga de barrera dieléctrica debido a las condiciones de temperatura suaves, que permiten que el catalizador esté en contacto directo con el plasma en una configuración de lecho fijo, y el funcionamiento a presión atmosférica, prometedor para aplicaciones industriales. En publicaciones recientes se han propuesto catalizadores de níquel soportados sobre óxidos metálicos basados en Ce para la metanación de CO2 asistida por plasma. El niquel es un metal adecuado ya que es activo para la metanación de CO2, además relativamente de bajo costo. El óxido de cerio (CeO2) es un material interesante para ser utilizado como soporte gracias a sus propiedades de redox relacionadas con la tendencia a formar vacantes de oxígeno. Dicha propiedad puede ajustarse potenciando la no estequiometria de la superficie del CeO2, ya sea por dopaje o, como en este caso, por modificación de la morfología, que se ha descrito para el óxido de cerio como controlable a través del método de síntesis. Se variaron los parámetros de la síntesis hidrotermal y se produjeron nanomateriales de CeO2 con diferente morfología (poliedros, nanorods, nanocubos), tamaño de cristalito y área superficial. Los catalizadores de Ni sintetizados con estos soportes se caracterizaron además mediante técnicas avanzadas para examinar las propiedades fisicoquímicas más relevantes, por ejemplo, el área superficial, la reducibilidad y la interacción metal-soporte, la basicidad superficial y la formación de vacantes de oxígeno. Además, se evaluó el comportamiento eléctrico de los catalizadores centrándose en cómo afectan los materiales a la descarga de plasma, la transferencia de carga y la propiedad dieléctrica del lecho fijo. Se utilizó la técnica operando FTIR para sugerir una posible vía de reacción de la metanización de CO2 con Ni/CeO2 asistida por plasma. En conclusión, se encontró que las propiedades fisicoquímicas que son relevantes en la metanación térmica convencional, como el área superficial y la basicidad, no son aplicables a la plasma catálisis, pero también se enfatiza la importancia de la baja permitividad dieléctrica del catalizador y el mecanismo de transferencia de carga para un proceso energéticamente eficiente. Además, un soporte de CeO2 en forma de barra o de aguja permite potenciar los defectos superficiales, la interacción con el Ni y la macroposoridad, que parecen facilitar la reacción de metanación en plasma por vía del formiato., [FR] Parmi les différents procédés de capture et d'utilisation du carbone, la méthanisation du CO2 connaît une renaissance comme une technologie prometteuse pour le développement du Power-to-gas et en tant que solution de stockage de l'énergie et de l'économie circulaire du carbone. Le domaine de la catalyse plasma, qui considère l'association d'un catalyseur avec un plasma non thermique, a été récemment développé pour stimuler la méthanation du CO2. Les défis de la catalyse assistée par plasma consistent à tirer profit des espèces activées et des électrons créés par le plasma pour obtenir des voies de réaction et des interactions plus favorables avec les sites actifs du catalyseur, ainsi que de la synergie plasma-catalyseur, c'est-à-dire de la modification des propriétés du catalyseur par contact avec le plasma et vice-versa. L'objectif de cette thèse est d'explorer l'effet de la morphologie et des propriétés physicochimiques des catalyseurs Ni/CeO2 nanostructurés sur la synergie plasma-catalyseur et de mettre en évidence les caractéristiques clés du catalyseur qui permettent une méthanisation efficace du CO2 assistée par plasma, afin de progresser dans la conception rationnelle de matériaux adaptés aux applications de la plasma-catalyse. Pour les essais de méthanation du CO2 assistée par plasma, les plasmas froids à décharge de barrière diélectrique (DBD) permettent des températures douces, ainsi qu’un contact direct entre le plasma et le catalyseur dans une configuration de lit fixe. Au même temps ils permettent l’opération sous pression atmosphérique, conditions idéales pour des applications industrielles. Des catalyseurs à base de nickel supportés par des oxydes métalliques à base de Ce ont été proposés dans des publications récentes pour la méthanisation du CO2 assistée par plasma. Le nickel est une solution fiable, car il est actif dans la méthanisation du CO2 et au même temps économiquement rentable. L'oxyde de cérium (CeO2) est un matériau intéressant à utiliser comme support grâce à ses propriétés d'oxydoréduction liées à sa capacité d’échange d'oxygène. Ces propriétés peuvent être ajustées en améliorant la nature non stœchiométrique de la surface de CeO2, soit par dopage, soit, comme dans le cas présent, par modification de la morphologie, ce qui a été rapporté pour l'oxyde de cérium comme pouvant être contrôlé par la méthode de synthèse. Ainsi, les paramètres de la synthèse hydrothermale ont été modifiés, ce qui a permis d’obtenir des nanomatériaux de CeO2 présentant différentes morphologies (polyèdres, nanorods, nanocubes), tailles de cristallites et surfaces actives. Les catalyseurs Ni synthétisés avec ces supports ont été caractérisés par des techniques de pointe afin d'examiner les propriétés physicochimiques les plus pertinentes, par exemple la surface, la réductibilité et l'interaction métal-support, la basicité de la surface et la formation de lacunes dans l'oxygène. En outre, le comportement électrique des catalyseurs a été évalué en mettant l'accent sur la manière dont les matériaux affectent la décharge du plasma, le transfert de charge et le comportement diélectrique du lit fixe. La technique FTIR operando a été utilisée pour suggérer une voie de réaction possible de la méthanisation du CO2 assistée par plasma sur Ni/CeO2. En conclusion, il a été constaté que les propriétés physicochimiques qui sont pertinentes dans la méthanisation thermique conventionnelle ne sont pas entièrement applicables à la catalyse par plasma, car l'importance d'une faible permittivité diélectrique du catalyseur et d'un mécanisme de transfert de charge est mise en évidence pour un processus de méthanisation efficace sur le plan énergétique. Finalement, un support CeO2 contenant des nanostructures en forme de tige ou d'aiguille permet d'améliorer les défauts de surface, l'interaction avec le Ni et la macroposorité, ce qui semble faciliter la réaction de méthanisation dans le plasma par la voie du formiate., This project has received funding from the European Union’s Horizon H2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement n.º 813393., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructured CeO2 as support of Ni-catalysts for plasma-catalytic CO2 methanation: Tailoring support’s nanomorphology towards improved performance

  • Musig, Beatrice
  • Roy, Abhijit
  • Arenal, Raúl
  • García Martínez, Tomás
  • Gálvez Parruca, María Elena
  • Navarro López, María Victoria
7 figures, 6 tables.-- Supporting information available.-- © 2023. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Plasma-assisted CO2 methanation has been recently presented as a highly promising route towards the electrification of power-to-gas processes, a key step in our transition to sustainable energy generation. Interesting results have been obtained via the combination of cold plasmas – such as Dielectric Barrier Discharge – and Ni-catalysts prepared using CeO2-containing oxides as support, well known for they ability towards oxygen exchange. In the present work, the physicochemical and dielectric properties of Ni/CeO2 catalysts were tailored through the modification of the nanostructured morphology of pure CeO2, as an alternative to the use of dopants/promoters. Improved efficiency was observed in the presence of CeO2 nanoneedles and nanorods exposing 〈0 1 1〉 facets, more prompt to oxygen exchange. The lower dielectric permittivity of these materials led to a more efficient management of adsorbed species during on-plasma operation, resulting in improved plasma-catalytic behavior., This work received funding from the European Union’s Horizon H2020 research and innovation programme under the Marie Skłodowska-Curie [grant number 813393]. This work was supported by the Departamento de Ciencia, Universidad y Sociedad del Conocimiento of the Gobierno de Aragón [project number LMP151_21]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Appendix A. Supplementary data for Nanostructured CeO2 as support of Ni-catalysts for plasma-catalytic CO2 methanation: Tailoring support’s nanomorphology towards improved performance [Dataset]

  • Musig, Beatrice
  • Roy, Abhijit
  • Arenal, Raúl
  • García Martínez, Tomás
  • Gálvez Parruca, María Elena
  • Navarro López, María Victoria
The textural features of the CeO2 supports and calcined catalysts were assessed by means of N2 adsorption at -196 °C, performed in an Autosorb 6 device (Quantachrome). X-Ray diffraction patterns (XRD) were acquired in a Bruker D8 Advance series II diffractometer using monochromatic Cu-Kα radiation (λ = 0,1541 nm) operated at 40 kV and 40 mA. Data were collected in the 2θ range from 20° to 90°, using a step size of 0.02° and a step time of 3 s. All the patterns obtained were calibrated against a silicon standard. The identification of crystalline phases and the subsequent Rietveld analysis was performed using the TOPAS software. Raman spectra were acquired in a Horiba Jobin Yvon HR800 UV dispersive laser Raman microscope. X-ray photoelectron spectroscopy (XPS) measurements were used to investigate the surface composition and chemical states of cerium and nickel. They were performed in a ESCA+ (Omicron) photoelectron spectrometer using a non-monochromatic AlKalpha X-ray source (h = 1486.7 eV). A pass energy of 50 eV was used for survey scans and 20 eV for detailed scans. Binding energies were referenced to the Ce3d v’2 (917 eV). The obtained spectra were analyzed using the CasaXPS software. Oxygen Storage Capacity (OSC) measurements of the nanostructured CeO2 supports were performed by thermogravimetric analysis (TGA) in a SETARAM Setsys Evolution device. Inductively coupled plasma atomic emission spectrometry (ICP-AES) was performed on the reduced catalysts using a Xpectroblue-EOP-TI FMT26 (Spectro) spectrophotometer and pre-treating the samples with lithium tetraborate. To assess the reducibility of the materials temperature-programmed reduction in H2 (H2-TPR) measurements were conducted in a BELCAT-M apparatus (BEL Japan Inc.) equipped with a thermal conductivity detector (TCD). Details on the morphology of the CeO2 nanostructured supports, as well as on the Ni-phase distribution on the catalysts prepared, were gained through scanning (SEM) and transition (TEM) electron microscopy analyses. SEM micrographs were acquired using a SEM Hitachi S-3400N microscope with variable pressure couple to an energy-dispersive X-ray spectrometer (X-EDS) Röntec XFlash operated at 10 kV. High-resolution TEM (HRTEM) was performed in a FEI Titan microscope at 300 kV containing spherical-aberration corrector at the objective lens. The high-resolution scanning TEM (HRSTEM), high-angle annular dark-field STEM (HAADF-STEM) images were acquired by a FEI TITAN Low Base TEM at 300 kV containing aberration corrector at the condenser lens and also equipped with X-EDS detector.-- Under a Creative Commons license CC.BY-NC-ND/4.0., 1. Synthesis of the CeO2 supports. 2. Physicochemical characterization techniques and devices. 3. Plasma-catalytic and thermo-catalytic setups & experimental procedures. 4. SEM and TEM characterization: 4.1. CeO2 supports. 4.2. Reduced Ni-catalysts. 4.3. Spent Ni-catalysts (used in plasma-catalytic methanation). 5. X-ray diffraction. 6. N2-adsorption isotherms. 7. X-ray photoelectron spectrometry. 8. Raman spectroscopy. 9. 10 h time-on-stream methanation experiments, This work received funding from the European Union’s Horizon H2020 research and innovation programme under the Marie Skłodowska-Curie [grant number 813393]. This work was supported by the Departamento de Ciencia, Universidad y Sociedad del Conocimiento of the Gobierno de Aragón [project number LMP151_21]., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanostructured CeO2 as support of Ni-catalysts for plasma-catalytic CO2 methanation: Tailoring support’s nanomorphology towards improved performance

  • Musig, Beatrice
  • Roy, Abhijit
  • Arenal, Raúl
  • García, Tomás
  • Gálvez, María Elena
  • Navarro, María Victoria
Plasma-assisted CO2 methanation has been recently presented as a highly promising route towards the electrification of power-to-gas processes, a key step in our transition to sustainable energy generation. Interesting results have been obtained via the combination of cold plasmas – such as Dielectric Barrier Discharge – and Ni-catalysts prepared using CeO2-containing oxides as support, well known for they ability towards oxygen exchange. In the present work, the physicochemical and dielectric properties of Ni/CeO2 catalysts were tailored through the modification of the nanostructured morphology of pure CeO2, as an alternative to the use of dopants/promoters. Improved efficiency was observed in the presence of CeO2 nanoneedles and nanorods exposing 〈0 1 1〉 facets, more prompt to oxygen exchange. The lower dielectric permittivity of these materials led to a more efficient management of adsorbed species during on-plasma operation, resulting in improved plasma-catalytic behavior.