Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Editorial for the Special Issue From Nanoinformatics to Nanomaterials Risk Assessment and Governance

  • Lynch, Iseult
  • Afantitis, Antreas
  • Greco, Darío
  • Dusinska, María
  • Bañares, Miguel A.
  • Melagraki, Georgia
© 2021 by the authors., Ensuring the safe and responsible use of nanotechnologies and nanoscale materials is imperative to maximize consumer confidence and drive commercialization of nano-enabled products that underpin innovation and advances in every industrial sector [...], Afantitis, Dusinska, Greco, Lynch and Melagraki acknowledge funding from H2020 project NanoSolveIT (grant agreement number 814572). Bañares acknowledges funding from H2020 project NanoInformaTIX (grant agreement n 814426). Lynch, Afantitis and Melagraki acknowledge funding from H2020 research infrastructure project NanoCommons (grant agreement number 731032). Dusinska, Lynch, Afantitis and Melagraki acknowledge funding from H2020 project RiskGONE (grant agreement number 814425)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Differentially Induced Autophagy by Engineered Nanomaterial Treatment Has an Impact on Cellular Homeostasis and Cytotoxicity

  • Alcolea-Rodríguez, Víctor
  • Dumit, V.I.
  • Ledwith, R.
  • Portela, Raquel
  • Bañares, Miguel A.
  • Pérez-Haase, A.
Considering the increasing production of engineered nanomaterials (ENMs), new approach methodologies (NAMs) are essential for safe-by-design approaches and risk assessment. Our aim was to enhance screening strategies with a focus on reactivity-triggered toxicities. We applied in vitro tests to 10 selected benchmark ENMs in two cell models, lung epithelial A549 and differentiated THP-1 macrophage-like cells. Previously, we categorized ENMs based on surface reactivity. Here we elucidated their reactivity-triggered cytotoxicity and mode of action using the WST-1 assay (metabolic activity), LDH assay (cell membrane integrity), autophagosome detection, and proteomics. Nonreactive SiO2 NM-200 showed no significant impact on cell viability. Conversely, highly reactive CuO and ZnO (NM-110 and NM-111) disrupted cell homeostasis. Interestingly, moderately reactive TiO2 (NM-101 and NM-105) and CeO2 (NM-211 and NM-212), apparently without an adverse effect, induced autophagosome formation, evidencing autophagy as a defensive mechanism. Our improved in vitro testing strategy, combined with state-of-the-art reactivity information, screens ENMs for potential reactivity-triggered toxicity. © 2024 The Authors. Published by American Chemical Society., ■ ACKNOWLEDGMENTS This work was supported by the EU H2020 project NanoInformaTIX (grant agreement no. 814426) and by the BfR Sonderforschungsprojekt 1322-734. We acknowledge the provision of test engineered nanomaterials by the JRC (Joint Research Centre) Repository., Supporting Information The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.nanolett.4c01573. Methodology and additional details including 4 tables with in chemico and proteomics data (PDF), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In chemico methodology for engineered nanomaterial categorization according to number, nature and oxidative potential of reactive surface sites

  • Alcolea-Rodríguez, Víctor
  • Portela, Raquel
  • Calvino Casilda, Vanesa
  • Bañares, Miguel A.
Methanol probe chemisorption quantifies the number of reactive sites at the surface of engineered nanomaterials, enabling normalization per reactive site in reactivity and toxicity tests, rather than per mass or physical surface area. Subsequent temperature-programmed surface reaction (TPSR) of chemisorbed methanol identifies the reactive nature of surface sites (acidic, basic, redox or combination thereof) and their reactivity. Complementary to the methanol assay, a dithiothreitol (DTT) probe oxidation reaction is used to evaluate the oxidation capacity. These acellular approaches to quantify the number, nature, and reactivity of surface sites constitute a new approach methodology (NAM) for site-specific classification of nanomaterials. As a proof of concept, CuO, CeO2, ZnO, Fe3O4, CuFe2O4, Co3O4 and two TiO2 nanomaterials were probed. A harmonized reactive descriptor for ENMs was obtained: the DTT oxidation rate per reactive surface site, or oxidative turnover frequency (OxTOF). CuO and CuFe2O4 ENMs exhibit the largest reactive site surface density and possess the highest oxidizing ability in the series, as estimated by the DTT probe reaction, followed by CeO2 NM-211 and then titania nanomaterials (DT-51 and NM-101) and Fe3O4. DTT depletion for ZnO NM-110 was associated with dissolved zinc ions rather than the ZnO particles; however, the basic characteristics of the ZnO NM-110 particles were evidenced by methanol TPSR. These acellular assays allow ranking the eight nanomaterials into three categories with statistically different oxidative potentials: CuO, CuFe2O4 and Co3O4 are the most reactive; ceria exhibits a moderate reactivity; and iron oxide and the titanias possess a low oxidative potential. © 2024 The Royal Society of Chemistry., The authors acknowledge the financial support by the European Commission H2020 project NanoInformaTIX (GA 814426). JRC reference materials were supplied by Dr. Juan Riego Sintes at JRC-Ispra, Supporting Information, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A refined dose metric for nanotoxicology based on surface site reactivity for oxidative potential of engineered nanomaterials

  • Alcolea-Rodríguez, Víctor
  • Simeone, Felice C.
  • Dumit, Verónica I.
  • Faccani, Lara
  • Toledo, Victoria
  • Haase, Andrea
  • Coca-López, Nicolás
  • Portela, Raquel
  • Bañares, Miguel A.
The increasing production of engineered nanomaterials (ENMs) raises significant concerns about human and environmental exposure, making it essential to understand the mechanisms of their interaction with biological systems to manage the associated risks. To address this, we propose categorizing ENM reactivity using in chemico methodologies. Surface analysis through methanol chemisorption and temperature-programmed surface reaction allows for the determination of reactive surface sites, providing accurate estimates of effective ENM doses in toxicity studies. Additionally, antioxidant consumption assays (dithiothreitol, cysteine, and glutathione) and reactive oxygen species (ROS) generation assays (RNO and DCFH2-DA) are employed to rank the oxidative potential of ENM surface sites in a cell-free environment. Our study confirms the classification of ZnO NM-110, ZnO NM-111, CuO, and carbon black as highly oxidant ENMs, while TiO2 NM-101 and NM-105 exhibit low oxidative potential due to their acidic surface sites. In contrast, CeO2 NM-211 and NM-212 demonstrate redox surface sites. SiO2 nanomaterials (NM-200 and NM-201) are shown to be inert, with low oxidation rates and minimal reactive surface density, despite their high surface area. Quantifying reactive surface sites offers a refined dose metric for assessing ENM toxicity, advancing safe-by-design nanomaterial development., The authors are grateful for the financial support from the European Commission H2020 project NanoInformaTIX (grant agreement number 814426), and to the German Federal Institute for Risk Assessment for Victor Alcolea-Rodriguez's stay, which was partially funded by European Commission H2020 project HARMLESS (grant agreement number 953183). We are also indebted to F. J. R. Vasques for his support with experimental work at ICP-CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Standardization of nanoecotoxicology to facilitate grouping strategies for engineered nanomaterials

  • Barrick, Andrew
  • Kalman, Judit
  • Manier, Nicolas
  • Châtel, Amélie
  • Fernández-Cruz, M. L.
  • Navas, José María
Nanoecotoxicology hypothesizes that alterations to a nanoform's physical structure can influence ecotoxicology. Grouping and read-across approaches have been proposed to streamline hazard assessments and reduce the burden of regulatory approval. The NanoReg2 project investigated the capacity of historical ecotoxicity data to support read-across approaches and found that the data were insufficient and the information reported was inconsistent. To explore the potential for grouping in ecotoxicology, the NanoReg2 project created a harmonized ecotoxicological database using nanomaterials representative of those available on the European Single Market. Relationships between pristine physicochemical properties, system-dependent changes to physical structure, and ecotoxicological responses were explored using mixed modelling. The study also explored the application of the NanoGENOTOX SOP to ecotoxicology to investigate the application of bovine serum albumin to create stable stock suspensions. Results demonstrated that nanomaterials can be grouped based on their core element (carbon, silicon, titanium, and zinc) and that inherent properties (initial size, density, surface area, purity) could be correlated to biological responses. Results also demonstrated that the use of bovine serum albumin influences the ecotoxicological potential of the tested nanomaterials, which may be attributed to their stability in suspension. While results were promising, initial physicochemical properties are autocorrelated, which challenges discrimination between nanoforms. The NanoReg2 project identified two barriers to implementing grouping approaches: inconsistent test preparations and limited access to historical data. To address these issues, developing FAIR (Findable, Accessible, Interoperable, and Reusable) data is necessary to integrate ecotoxicology into regulatory paradigms., The research contained within this publication was funded by the European Union's Horizon 2020 research and innovation program NANoREG2 under grant agreement 646221 and NanoInformaTIX under grant agreement 814426., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A systematic quality evaluation and review of nanomaterial genotoxicity studies: a regulatory perspective

  • Siivola, Kirsi M.
  • Burgum, Michael J.
  • Suárez-Merino, Blanca
  • Clift, Martin J. D.
  • Doak, Shareen H.
  • Catalán, Julia
The number of publications in the field of nanogenotoxicology and the amount of genotoxicity data on nanomaterials (NMs) in several databases generated by European Union (EU) funded projects have increased during the last decade. In parallel, large research efforts have contributed to both our understanding of key physico-chemical (PC) parameters regarding NM characterization as well as the limitations of toxicological assays originally designed for soluble chemicals. Hence, it is becoming increasingly clear that not all of these data are reliable or relevant from the regulatory perspective. The aim of this systematic review is to investigate the extent of studies on genotoxicity of NMs that can be considered reliable and relevant by current standards and bring focus to what is needed for a study to be useful from the regulatory point of view. Due to the vast number of studies available, we chose to limit our search to two large groups, which have raised substantial interest in recent years: nanofibers (including nanotubes) and metal-containing nanoparticles. Focusing on peer-reviewed publications, we evaluated the completeness of PC characterization of the tested NMs, documentation of the model system, study design, and results according to the quality assessment approach developed in the EU FP-7 GUIDEnano project. Further, building on recently published recommendations for best practices in nanogenotoxicology research, we created a set of criteria that address assay-specific reliability and relevance for risk assessment purposes. Articles were then reviewed, the qualifying publications discussed, and the most common shortcomings in NM genotoxicity studies highlighted. Moreover, several EU projects under the FP7 and H2020 framework set the aim to collectively feed the information they produced into the eNanoMapper database. As a result, and over the years, the eNanoMapper database has been extended with data of various quality depending on the existing knowledge at the time of entry. These activities are highly relevant since negative results are often not published. Here, we have reviewed the NanoInformaTIX instance under the eNanoMapper database, which hosts data from nine EU initiatives. We evaluated the data quality and the feasibility of use of the data from a regulatory perspective for each experimental entry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

P08-13 Quality evaluation and reviewof nanomaterial genotoxicity studies and data – a regulatory perspective

  • Siivola, K.M.
  • Burgum, M.J.
  • Suárez-Merino, B.
  • Clift, M.J.
  • Doak, S.H.
  • Catalán, J.
Background: The number of publications in the field of nanogenotoxicology and the amount of genotoxicity data at several databases generated by EU funded projects have increased during the last decade. The aim of this work was to investigate to what extent this information could be useful from a regulatory perspective.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The dispersion method does not affect the in vitro genotoxicity of multi-walled carbon nanotubes despite inducing surface alterations

  • Burgum, Michael J.
  • Alcolea-Rodríguez, Víctor
  • Saarelainen, Hanna
  • Portela, Raquel
  • Reinosa, Julián J.
  • Fernández, José F.
  • Dumit, Verónica I.
  • Catalán, Julia
  • Simeone, Felice C.
  • Faccani, Lara
  • Clift, Martin J.D.
  • Evans, Stephen J.
  • Bañares, Miguel A.
  • Doak, Shareen H.
Multi-walled carbon nanotubes (MWCNTs) are a desirable class of high aspect ratio nanomaterials (HARNs) owing to their extensive applications. Given their demand, the growing occupational and consumer exposure to these materials has warranted an extensive investigation into potential hazards they may pose towards human health. This study utilised both the in vitro mammalian cell gene mutation and the cytokinesis-blocked micronucleus (CBMN) assays to investigate genotoxicity in human lymphoblastoid (TK6) and 16HBE14o− human lung epithelial cells, following exposure to NM-400 and NM-401 MWCNTs for 24 h. To evaluate the potential for secondary genotoxicity, the CBMN assay was applied on a co-culture of 16HBE14o− with differentiated human monocytic (dTHP-1) cells. In addition, two dispersion methods (NanoGenoTox vs. high shear mixing) were utilised prior to exposures and in acellular experiments to assess the effects on MWCNT oxidative potential, aspect ratio and surface properties. These were characterized in chemico as well as by electron microscopy and Raman spectroscopy. Structural damage of NM-400 was observed following both dispersion approaches; Raman spectra highlighted greater oxidative transformation under probe sonication as opposed to high shear mixing. Despite the changes to the oxidative potential of the MWCNTs, no statistically significant genotoxicity was observed under the conditions applied. There was also no visible signs of cellular internaliation of NM-400 or NM-401 into either cell type under the test conditions, which may support the negative genotoxic response. Whilst these HARNs may have oxidative potential, cells have natural protective mechanisms for repairing transient DNA damage. Therefore, it is crucial to evaluate biological endpoints which measure fixed DNA damage to account for the impact of DNA repair mechanisms.