Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelling and energy efficiency analysis of the microwave continuous processing of limestone

  • Do Nascimento-Gonçalves, Sofia
  • Albuquerque, Duarte Manuel
  • Fernandes Pereira, José Carlos
[EN] Our numerical investigation is oriented to the energy efficiency of the microwave heating technology for the continuous production of cement clinker. Simulations of the novel microwave continuous processing of limestone are performed using the COMSOL Multiphysics (R) Software. The proposed mathematical model couples Maxwell's equations with energy and chemical equations, and numerical verification and validation are undertaken to support the accuracy of the results in this work. This approach includes automatic control actions regulating energy input and cavity impedance. A rectangular waveguide, operating as a single -mode cavity at 2.45 GHz, is utilized. The impact of various fill ratios of material on the system's efficiency unveiled an intriguing heat transfer mechanism responsible for optimal operational conditions, with microwave efficiency up to 75% and thermal efficiency exceeding 90%. Notably, the potential of microwave technology in reducing greenhouse gas emissions is contingent upon establishing clean energy sources for electricity production., These results are contributions from the project DESTINY, which has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement n degrees 820783.Institutional Acknowledgements: The authors acknowledge Fundacao para a Ciencia e a Tecnologia (FCT), Portugal for its financial support via the projects LAETA Base Funding (DOI: 10.54499/UIDB/50022/2020) and LAETA Programatic Funding, Portugal (DOI: 10.54499/UIDP/50022/2020).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Measurement Approach for Characterizing Temperature-Related Emissivity Variability in High-Emissivity Materials

  • Cosoli, Gloria
  • Chiariotti, Paolo
  • Pandarese, Giuseppe
  • Revel, Gian Marco
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
[EN] The effective knowledge of emissivity is pivotal to obtain reliable temperature measurements through non-contact techniques like pyrometry and thermal imaging. This is fundamental in high-temperature applications since material emissivity strongly depends on temperature conditions. Given the recent attention in high-temperature applications, especially for replacing fossil-fuel-dependent heating with greener solutions in energy-intensive processes, renewed interest in characterizing materials radiant properties rose. This work presents a measurement procedure for characterizing the total emissivity of high-emissivity materials exploiting microwaves for heating the test material. The procedure grounds on a sequential approach, using a reference material of known emissivity (e.g., high-emissivity coating, already characterized sample holder, etc.) to derive the target material total emissivity. Uncertainty analysis is performed to provide a metrological characterization of the approach. The procedure is validated on target materials of known emissivity, focusing on high-emissivity materials commonly employed in microwave heating processes. Results are compatible with reference literature and material datasheets, demonstrating the validity of the proposed approach., This research was funded by the European Union's Horizon 2020 research and innovation programme under grant agreement no. 820783, in the framework of the DESTINY (Development of an Efficient Microwave System for Material Transformation in energy INtensive processes for an improved Yield) project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of Microwave Synthesis of Ceramic Pigments Based on In Situ Dielectric Characterization

  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Sánchez-Marín, Juan Rafael|||0000-0003-4887-5810
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Godes, Jose L.
  • Leonelli, Cristina
[EN] The application of microwave technology for efficient and environmentally friendly synthesis of ceramic pigments is a successful and rapidly evolving area of research. However, a clear understanding of the reactions and their relationship with the material absorbance has not been fully achieved. The present study introduces an in situ permittivity characterization technique, which serves as an innovative and precise tool for assessing the microwave synthesis of ceramic pigments. Several processing parameters (atmosphere, the heating rate, raw mixture composition and particle size) were evaluated by studying the permittivity curves as a function of temperature to elucidate their effect on the synthesis temperature and the final pigment quality. The validity of the proposed approach was verified through correlation with other well-known analysis techniques, such as DSC or XRD, providing valuable information about the reaction mechanisms and the optimum conditions for the synthesis process. In particular, changes in permittivity curves were linked, for the first time, to undesired metal oxide reduction at too-high heating rates and could be used to detect pigment synthesis failures and ensure product quality. The proposed dielectric analysis was also found to be a useful tool for optimizing raw material composition for the microwave process, including the use of chromium with lower specific surface area and flux removal., This research was funded by the European Union s Horizon 2020 research and innovation programme under grant agreement number 820783.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric and optical evaluation of high-emissivity coatings for temperature measurements in microwave applications

  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Chiariotti, Paolo
  • Napolitano, Rachele
  • Pandarese, Giuseppe
  • Navarrete Algaba, Laura
  • Revel, Gian Marco
[EN] In this work, several commercial high-emissivity coatings have been characterized in terms of emissivity, chemical composition and dielectric properties as a function of temperature, under microwave irradiation. Accurate knowledge of their response under exposure to microwaves provides new and crucial information about their practical usability for non-contact temperature measurements in microwave environments. Due to their high metallic content, some of the studied coatings exhibited unexpected microwave-triggered reactions that hindered their use up to the maximum temperature specified by the manufacturers. Emissivity and chemical analyses before and after the heating cycles confirmed the degradation of some of the samples predicted by dielectric measurements. This work illustrates how a careful characterization of optical and dielectric properties under representative operating conditions (temperature range, microwave exposure) is vital in order to select the appropriate reference coating to obtain reliable temperature measurements in microwave applications., This research was funded by the European Unions Horizon 2020 research and innovation programme under grant agreement number 820783.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High Temperature Dielectric Properties of Iron- and Zinc-Bearing Products during Carbothermic Reduction by Microwave Heating

  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Sánchez-Marín, Juan Rafael|||0000-0003-4887-5810
  • Navarrete Algaba, Laura
  • López-Buendía, Angel M.
  • Schmidt, Lukas
[EN] In this work, the carbothermic reduction of iron- and zinc-bearing products is studied through in situ microwave heating, dielectric properties monitoring, and mass spectrometry up to high temperatures (1000 degrees C). The results are correlated to the information provided by conventional analysis techniques such as differential scanning calorimetry (DSC) and thermogravimetry (TG). This combination allows a detailed study of seven different process stages with an accurate determination of the reaction temperatures, providing new evidence about the particular conditions of this microwave-driven reduction process. The presented results suggest that molecular vibrations imposed by the microwave field are presumably the reason for reactions taking place at lower temperatures than those observed in the conventional process. This work also explores the influence of other parameters, such as the apparent density or the amount of carbonaceous material, on the resulting dielectric properties, providing useful information for the development of a potential microwave industrial application in the metallurgy field., This research was funded by the European Union's Horizon 2020 research and innovation programme under Grant Agreement number 820783.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High temperature dielectric properties of iron-and zinc-bearing products during carbothermic reduction by microwave heating

  • García-Baños, Beatriz
  • Catalá-Civera, José M.
  • Sánchez, J.R.
  • Navarrete Algaba, Laura
  • López-Buendía, A. M.
  • Schmidt, L.
In this work, the carbothermic reduction of iron-and zinc-bearing products is studied through in situ microwave heating, dielectric properties monitoring, and mass spectrometry up to high temperatures (1000 °C). The results are correlated to the information provided by conventional analysis techniques such as differential scanning calorimetry (DSC) and thermogravimetry (TG). This combination allows a detailed study of seven different process stages with an accurate determination of the reaction temperatures, providing new evidence about the particular conditions of this microwave-driven reduction process. The presented results suggest that molecular vibrations imposed by the microwave field are presumably the reason for reactions taking place at lower temperatures than those observed in the conventional process. This work also explores the influence of other parameters, such as the apparent density or the amount of carbonaceous material, on the resulting dielectric properties, providing useful information for the development of a potential microwave industrial application in the metallurgy field., This research was funded by the European Union’s Horizon 2020 research and innovation programme under Grant Agreement number 820783., Peer reviewed