Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Communication-aware sparse patterns for the factorized approximate inverse preconditioner

  • Laut Turón, Sergi
  • Casas, Marc|||0000-0003-4564-2093
  • Borrell Pol, Ricard
The Conjugate Gradient (CG) method is an iterative solver targeting linear systems of equations Ax=b where A is a symmetric and positive definite matrix. CG convergence properties improve when preconditioning is applied to reduce the condition number of matrix A. While many different options can be found in the literature, the Factorized Sparse Approximate Inverse (FSAI) preconditioner constitutes a highly parallel option based on approximating A-1. This paper proposes the Communication-aware Factorized Sparse Approximate Inverse preconditioner (FSAIE-Comm), a method to generate extensions of the FSAI sparse pattern that are not only cache friendly, but also avoid increasing communication costs in distributed memory systems. We also propose a filtering strategy to reduce inter-process imbalance. We evaluate FSAIE-Comm on a heterogeneous set of 39 matrices achieving an average solution time decrease of 17.98%, 26.44% and 16.74% on three different architectures, respectively, Intel Skylake, Fujitsu A64FX and AMD Zen 2 with respect to FSAI. In addition, we consider a set of 8 large matrices running on up to 32,768 CPU cores, and we achieve an average solution time decrease of 12.59%., Marc Casas is supported by Grant RYC-2017-23269 funded by MCIN/AEI/ 10.13039/501100011033 and by “ESF Investing in your future”. This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 955606. This work has been supported by the Computación de Altas Prestaciones VIII (BSC-HPC8) project. It has also been partially supported by the EXCELLERAT project funded by the European Commission’s ICT activity of the H2020 Programme under grant agreement number: 823691 and by the Spanish Ministry of Science and Innovation (Nucleate, Project PID2020-117001GB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Cache-aware sparse patterns for the factorized sparse approximate inverse preconditioner

  • Laut Turón, Sergi
  • Borrell Pol, Ricard
  • Casas, Marc|||0000-0003-4564-2093
Conjugate Gradient is a widely used iterative method to solve linear systems Ax=b with matrix A being symmetric and positive definite. Part of its effectiveness relies on finding a suitable preconditioner that accelerates its convergence. Factorized Sparse Approximate Inverse (FSAI) preconditioners are a prominent and easily parallelizable option. An essential element of a FSAI preconditioner is the definition of its sparse pattern, which constraints the approximation of the inverse A-1. This definition is generally based on numerical criteria. In this paper we introduce complementary architecture-aware criteria to increase the numerical effectiveness of the preconditioner without incurring in significant performance costs. In particular, we define cache-aware pattern extensions that do not trigger additional cache misses when accessing vector x in the y=Ax Sparse Matrix-Vector (SpMV) kernel. As a result, we obtain very significant reductions in terms of average solution time ranging between 12.94% and 22.85% on three different architectures - Intel Skylake, POWER9 and A64FX - over a set of 72 test matrices., This work is partially supported by the Spanish Ministry of Science and Technology through PID2019-107255GB project and by the Generalitat de Catalunya (contract 2017-SGR-1414). Marc Casas has been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramon y Cajal fellowship number RYC-2017-23269. It has also been partially supported by the EXCELLERAT project funded by the European Commission’s ICT activity of the H2020 Programme under grant agreement number: 823691., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Effects of the actuation on the boundary layer of an airfoil at Reynolds Number Re = 60000

  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Borrell Pol, Ricard
Synthetic (zero net mass flux) jets are an active flow control technique to manipulate the flow field in wall-bounded and free-shear flows. The present paper focuses on the role of the periodic actuation mechanisms on the boundary layer of a SD7003 airfoil at Re=U∞C/ν=6×104. Here, Reynolds number is defined in terms of the free-stream velocity U∞ and the airfoil chord C. The actuation is applied near the leading edge of the airfoil and is periodic in time and in the spanwise direction. The actuation successfully eliminates the laminar bubble at AoA=4∘, however, it does not produce an increase in the airfoil aerodynamic efficiency. At angles of attack larger than the point of maximum lift, the actuation eliminates the massive flow separation, the flow being attached to the airfoil surface in a significant part of the airfoil chord. As a consequence, airfoil aerodynamic efficiency increases by a 124% with a reduction of the drag coefficient about 46%. This kind of technique seems to be promising at delaying flow separation and its associated losses when the angle of attack increases beyond the maximum lift for the baseline case., This work has been partially fnancially supported by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (Ref. TRA2017-88508-R) and by European Union’s Horizon 2020 research and innovation programme (INFRAEDI-02-2018, EXCELLERAT—The European Centre Of Excellence For Engineering Applications H2020.). We also acknowledge Red Española de Surpercomputación (RES) for awarding us access to the MareNostrum IV machine based in Barcelona, Spain (Ref. FI-2018-2-0015 and FI-2018-3-0021).This work is also funded in part by the Coturb program of the European Research Council., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Active flow control for external aerodynamics: from micro air vehicles to a full aircraft in stall

  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Lozano-Durán, Adrian
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
We investigate the aerodynamic performance of active flow control of airfoils and wings using synthetic jets with zero net-mass flow. The study is conducted via wall-resolved and wall-modeled large-eddy simulation using two independent CFD solvers: Alya, a finite-element- based solver; and charLES, a finite-volume-based solver. Our approach is first validated in a NACA4412, for which numerical and experimental results are already available in the literature. The performance of synthetic jets is evaluated for two flow configurations: a SD7003 airfoil at moderate Reynolds number with laminar separation bubble, which is representative of Micro Air Vehicles, and the high-lift configuration of the JAXA Standard Model at realistic Reynolds numbers for landing. In both cases, our predictions indicate that, at high angles of attack, the control successfully eliminates the laminar/turbulent recirculations located downstream the actuator, which increases the aerodynamic performance. Our efforts illustrate the technology- readiness of large-eddy simulation in the design of control strategies for real-world external aerodynamic applications., This work is funded in part by the Coturb program of the European Research Council. O. L. acknowledges the financial support by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (ref. TRA2017-88508-R) and the European Union’s Horizon 2020 research and innovation programme (INFRAEDI-02-2018, EXCELLERAT- The European Centre Of Excellence For Engineering Applications H2020.). We also acknowledge Red Española de Supercomputación and Barcelona Supercomputing Center for awarding us access to the MareNostrum IV machine based in Barcelona, Spain (FI-2018-3- 0021, FI-2018-2-0015, FI-2018-1-0022, FI-2017-3-0024). We acknowledge Prof. R. Vinuesa for the discussions and data analysis of the NACA4412. A.L.-D. acknowledges the support of NASA Transformative Aeronautics Concepts Program (Grant No. NNX15AU93A) and the Office of Naval Research (Grant No. N000141712310)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Heterogeneous CPU/GPU co-execution of CFD simulations on the POWER9 architecture: Application to airplane aerodynamics

  • Borrell, Ricard
  • Dosimont, Damien
  • Garcia Gasulla, Marta|||0000-0003-3682-9905
  • Houzeaux, Guillaume|||0000-0002-2592-1426
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Mehta, Vishal
  • Owen, Herbert
  • Vázquez, Mariano|||0000-0002-2526-6708
  • Oyarzun Altamirano, Guillermo|||0000-0001-9524-3782
High fidelity Computational Fluid Dynamics simulations are generally associated with large computing requirements, which are progressively acute with each new generation of supercomputers. However, significant research efforts are required to unlock the computing power of leading-edge systems, currently referred to as pre-Exascale systems, based on increasingly complex architectures. In this paper, we present the approach implemented in the computational mechanics code Alya. We describe in detail the parallelization strategy implemented to fully exploit the different levels of parallelism, together with a novel co-execution method for the efficient utilization of heterogeneous CPU/GPU architectures. The latter is based on a multi-code co-execution approach with a dynamic load balancing mechanism. The assessment of the performance of all the proposed strategies has been carried out for airplane simulations on the POWER9 architecture accelerated with NVIDIA Volta V100 GPUs., This work is partially supported by the BSC-IBM Deep Learning Research Agreement, under JSA \Application porting, analysis and optimization for POWER and POWER AI". It has also been partially supported by the EX-CELLERAT project funded by the European Commission's ICT activity of the H2020 Programme under grant agreement number: 823691. It has also received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement number: 846139 (Exa-FireFlows). This paper expresses the opinions of the authors and not necessarily those of the European Commission. The European Commission is not liable for any use that may be made of the information contained in this paper. This work has also been nan- cially supported by the Ministerio de Economia, Industria y Competitividad, of Spain (TRA2017-88508-R). The computing experiments of this paper have been performed on the resources of the Barcelona Supercomputing Center., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Parallel SFC-based mesh partitioning and load balancing

  • Borrell Pol, Ricard
  • Oyarzun Altamirano, Guillermo|||0000-0001-9524-3782
  • Dosimont, Damien
  • Houzeaux, Guillaume|||0000-0002-2592-1426
Modern supercomputers allow the simulation of complex phenomena with increased accuracy. Eventually, this requires finer geometric discretizations with larger numbers of mesh elements. In this context, and extrapolating to the Exascale paradigm, meshing operations such as generation, adaptation or partition, become a critical issue within the simulation workflow. In this paper, we focus on mesh partitioning. In particular, we present some improvements carried out on an in-house parallel mesh partitioner based on the Hilbert Space-Filling Curve. Additionally, taking advantage of its performance, we present the application of the SFC-based partitioning for dynamic load balancing. This method is based on the direct monitoring of the imbalance at runtime and the subsequent re-partitioning of the mesh. The target weights for the optimized partitions are evaluated using a least-squares approximation considering all measurements from previous iterations. In this way, the final partition corresponds to the average performance of the computing devices engaged., This work is partially supported by the BSC-IBM Deep Learning Research Agreement, under JSA “Application porting, analysis and optimization for POWER and POWERAI”. It has also been partially supported by the EXCELLERAT project funded by the European Commission’s ICT activity of the H2020 Programme under grant agreement number: 823691. It has also received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement number: 846139 (Exa-FireFlows). This paper expresses the opinions of the authors and not necessarily those of the European Commission. The European Commission is not liable for any use that may be made of the information contained in this paper. This work has also been financially supported by the Ministerio de Economia, Industria y Competitividad, of Spain (TRA2017-88508-R). The computing experiments of this paper have been performed on the resources of the Barcelona Supercomputing Center., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On the Characteristics of the Super-Critical Wake behind a Circular Cylinder

  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
The flow topology of the wake behind a circular cylinder at the super-critical Reynolds number of Re=7.2×105 is investigated by means of large eddy simulations. In spite of the many research works on circular cylinders, there are no studies concerning the main characteristics and topology of the near wake in the super-critical regime. Thus, the present work attempts to fill the gap in the literature and contribute to the analysis of both the unsteady wake and the turbulent statistics of the flow. It is found that although the wake is symmetric and preserves similar traits to those observed in the sub-critical regime, such as the typical two-lobed configuration in the vortex formation zone, important differences are also observed. Owing to the delayed separation of the flow and the transition to turbulence in the attached boundary layer, Reynolds stresses peak in the detached shear layers close to the separation point. The unsteady mean flow is also investigated, and topological critical points are identified in the vortex formation zone and the near wake. Finally, time-frequency analysis is performed by means of wavelets. The study shows that in addition to the vortex shedding frequency, the inception of instabilities that trigger transition to turbulence occurs intermittently in the attached boundary layer and is registered as a phenomenon of variable intensity in time., This work was partially financially supported by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (Ref. TRA2017-88508-R) and by European Union’s Horizon 2020 research and innovation programme (INFRAEDI-02-2018, EXCELLERATThe European Centre Of Excellence For Engineering Applications H2020). The work of O. Lehmkuhl is financed by a Ramón y Cajal postdoctoral contract by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (RYC2018-025949-I)). We also acknowledge PRACE for awarding us access to SuperMUC supercomputer (Project ViValdi Ref. 2017174222)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effects of the actuation on the boundary layer of an airfoil at Reynolds Number Re = 60000

  • Rodríguez Pérez, Ivette María
  • Lehmkuhl Barba, Oriol
  • Borrell Pol, Ricard
Synthetic (zero net mass flux) jets are an active flow control technique to manipulate the flow field in wall-bounded and free-shear flows. The present paper focuses on the role of the periodic actuation mechanisms on the boundary layer of a SD7003 airfoil at Re=U∞C/ν=6×104. Here, Reynolds number is defined in terms of the free-stream velocity U∞ and the airfoil chord C. The actuation is applied near the leading edge of the airfoil and is periodic in time and in the spanwise direction. The actuation successfully eliminates the laminar bubble at AoA=4∘, however, it does not produce an increase in the airfoil aerodynamic efficiency. At angles of attack larger than the point of maximum lift, the actuation eliminates the massive flow separation, the flow being attached to the airfoil surface in a significant part of the airfoil chord. As a consequence, airfoil aerodynamic efficiency increases by a 124% with a reduction of the drag coefficient about 46%. This kind of technique seems to be promising at delaying flow separation and its associated losses when the angle of attack increases beyond the maximum lift for the baseline case., This work has been partially fnancially supported by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (Ref. TRA2017-88508-R) and by European Union’s Horizon 2020 research and innovation programme (INFRAEDI-02-2018, EXCELLERAT—The European Centre Of Excellence For Engineering Applications H2020.). We also acknowledge Red Española de Surpercomputación (RES) for awarding us access to the MareNostrum IV machine based in Barcelona, Spain (Ref. FI-2018-2-0015 and FI-2018-3-0021).This work is also funded in part by the Coturb program of the European Research Council., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Parallel SFC-based mesh partitioning and load balancing

  • Borrell Pol, Ricard
  • Oyarzun Altamirano, Guillermo
  • Dosimont, Damien
  • Houzeaux, Guillaume
Modern supercomputers allow the simulation of complex phenomena with increased accuracy. Eventually, this requires finer geometric discretizations with larger numbers of mesh elements. In this context, and extrapolating to the Exascale paradigm, meshing operations such as generation, adaptation or partition, become a critical issue within the simulation workflow. In this paper, we focus on mesh partitioning. In particular, we present some improvements carried out on an in-house parallel mesh partitioner based on the Hilbert Space-Filling Curve. Additionally, taking advantage of its performance, we present the application of the SFC-based partitioning for dynamic load balancing. This method is based on the direct monitoring of the imbalance at runtime and the subsequent re-partitioning of the mesh. The target weights for the optimized partitions are evaluated using a least-squares approximation considering all measurements from previous iterations. In this way, the final partition corresponds to the average performance of the computing devices engaged., This work is partially supported by the BSC-IBM Deep Learning Research Agreement, under JSA “Application porting, analysis and optimization for POWER and POWERAI”. It has also been partially supported by the EXCELLERAT project funded by the European Commission’s ICT activity of the H2020 Programme under grant agreement number: 823691. It has also received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement number: 846139 (Exa-FireFlows). This paper expresses the opinions of the authors and not necessarily those of the European Commission. The European Commission is not liable for any use that may be made of the information contained in this paper. This work has also been financially supported by the Ministerio de Economia, Industria y Competitividad, of Spain (TRA2017-88508-R). The computing experiments of this paper have been performed on the resources of the Barcelona Supercomputing Center., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Communication-aware sparse patterns for the factorized approximate inverse preconditioner

  • Laut Turón, Sergi
  • Casas, Marc
  • Borrell Pol, Ricard
The Conjugate Gradient (CG) method is an iterative solver targeting linear systems of equations Ax=b where A is a symmetric and positive definite matrix. CG convergence properties improve when preconditioning is applied to reduce the condition number of matrix A. While many different options can be found in the literature, the Factorized Sparse Approximate Inverse (FSAI) preconditioner constitutes a highly parallel option based on approximating A-1. This paper proposes the Communication-aware Factorized Sparse Approximate Inverse preconditioner (FSAIE-Comm), a method to generate extensions of the FSAI sparse pattern that are not only cache friendly, but also avoid increasing communication costs in distributed memory systems. We also propose a filtering strategy to reduce inter-process imbalance. We evaluate FSAIE-Comm on a heterogeneous set of 39 matrices achieving an average solution time decrease of 17.98%, 26.44% and 16.74% on three different architectures, respectively, Intel Skylake, Fujitsu A64FX and AMD Zen 2 with respect to FSAI. In addition, we consider a set of 8 large matrices running on up to 32,768 CPU cores, and we achieve an average solution time decrease of 12.59%., Marc Casas is supported by Grant RYC-2017-23269 funded by MCIN/AEI/ 10.13039/501100011033 and by “ESF Investing in your future”. This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 955606. This work has been supported by the Computación de Altas Prestaciones VIII (BSC-HPC8) project. It has also been partially supported by the EXCELLERAT project funded by the European Commission’s ICT activity of the H2020 Programme under grant agreement number: 823691 and by the Spanish Ministry of Science and Innovation (Nucleate, Project PID2020-117001GB-I00)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On the Characteristics of the Super-Critical Wake behind a Circular Cylinder

  • Rodríguez Pérez, Ivette María
  • Lehmkuhl Barba, Oriol
The flow topology of the wake behind a circular cylinder at the super-critical Reynolds number of Re=7.2×105 is investigated by means of large eddy simulations. In spite of the many research works on circular cylinders, there are no studies concerning the main characteristics and topology of the near wake in the super-critical regime. Thus, the present work attempts to fill the gap in the literature and contribute to the analysis of both the unsteady wake and the turbulent statistics of the flow. It is found that although the wake is symmetric and preserves similar traits to those observed in the sub-critical regime, such as the typical two-lobed configuration in the vortex formation zone, important differences are also observed. Owing to the delayed separation of the flow and the transition to turbulence in the attached boundary layer, Reynolds stresses peak in the detached shear layers close to the separation point. The unsteady mean flow is also investigated, and topological critical points are identified in the vortex formation zone and the near wake. Finally, time-frequency analysis is performed by means of wavelets. The study shows that in addition to the vortex shedding frequency, the inception of instabilities that trigger transition to turbulence occurs intermittently in the attached boundary layer and is registered as a phenomenon of variable intensity in time., This work was partially financially supported by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (Ref. TRA2017-88508-R) and by European Union’s Horizon 2020 research and innovation programme (INFRAEDI-02-2018, EXCELLERATThe European Centre Of Excellence For Engineering Applications H2020). The work of O. Lehmkuhl is financed by a Ramón y Cajal postdoctoral contract by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (RYC2018-025949-I)). We also acknowledge PRACE for awarding us access to SuperMUC supercomputer (Project ViValdi Ref. 2017174222)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Active flow control for external aerodynamics: from micro air vehicles to a full aircraft in stall

  • Lehmkuhl Barba, Oriol
  • Lozano-Durán, Adrian
  • Rodríguez Pérez, Ivette María
We investigate the aerodynamic performance of active flow control of airfoils and wings using synthetic jets with zero net-mass flow. The study is conducted via wall-resolved and wall-modeled large-eddy simulation using two independent CFD solvers: Alya, a finite-element- based solver; and charLES, a finite-volume-based solver. Our approach is first validated in a NACA4412, for which numerical and experimental results are already available in the literature. The performance of synthetic jets is evaluated for two flow configurations: a SD7003 airfoil at moderate Reynolds number with laminar separation bubble, which is representative of Micro Air Vehicles, and the high-lift configuration of the JAXA Standard Model at realistic Reynolds numbers for landing. In both cases, our predictions indicate that, at high angles of attack, the control successfully eliminates the laminar/turbulent recirculations located downstream the actuator, which increases the aerodynamic performance. Our efforts illustrate the technology- readiness of large-eddy simulation in the design of control strategies for real-world external aerodynamic applications., This work is funded in part by the Coturb program of the European Research Council. O. L. acknowledges the financial support by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (ref. TRA2017-88508-R) and the European Union’s Horizon 2020 research and innovation programme (INFRAEDI-02-2018, EXCELLERAT- The European Centre Of Excellence For Engineering Applications H2020.). We also acknowledge Red Española de Supercomputación and Barcelona Supercomputing Center for awarding us access to the MareNostrum IV machine based in Barcelona, Spain (FI-2018-3- 0021, FI-2018-2-0015, FI-2018-1-0022, FI-2017-3-0024). We acknowledge Prof. R. Vinuesa for the discussions and data analysis of the NACA4412. A.L.-D. acknowledges the support of NASA Transformative Aeronautics Concepts Program (Grant No. NNX15AU93A) and the Office of Naval Research (Grant No. N000141712310)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Cache-aware sparse patterns for the factorized sparse approximate inverse preconditioner

  • Laut Turón, Sergi
  • Borrell Pol, Ricard
  • Casas, Marc
Conjugate Gradient is a widely used iterative method to solve linear systems Ax=b with matrix A being symmetric and positive definite. Part of its effectiveness relies on finding a suitable preconditioner that accelerates its convergence. Factorized Sparse Approximate Inverse (FSAI) preconditioners are a prominent and easily parallelizable option. An essential element of a FSAI preconditioner is the definition of its sparse pattern, which constraints the approximation of the inverse A-1. This definition is generally based on numerical criteria. In this paper we introduce complementary architecture-aware criteria to increase the numerical effectiveness of the preconditioner without incurring in significant performance costs. In particular, we define cache-aware pattern extensions that do not trigger additional cache misses when accessing vector x in the y=Ax Sparse Matrix-Vector (SpMV) kernel. As a result, we obtain very significant reductions in terms of average solution time ranging between 12.94% and 22.85% on three different architectures - Intel Skylake, POWER9 and A64FX - over a set of 72 test matrices., This work is partially supported by the Spanish Ministry of Science and Technology through PID2019-107255GB project and by the Generalitat de Catalunya (contract 2017-SGR-1414). Marc Casas has been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramon y Cajal fellowship number RYC-2017-23269. It has also been partially supported by the EXCELLERAT project funded by the European Commission’s ICT activity of the H2020 Programme under grant agreement number: 823691., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Heterogeneous CPU/GPU co-execution of CFD simulations on the POWER9 architecture: Application to airplane aerodynamics

  • Borrell, Ricard
  • Dosimont, Damien
  • Garcia Gasulla, Marta
  • Houzeaux, Guillaume
  • Lehmkuhl Barba, Oriol
  • Mehta, Vishal
  • Owen, Herbert
  • Vázquez, Mariano
  • Oyarzun Altamirano, Guillermo
High fidelity Computational Fluid Dynamics simulations are generally associated with large computing requirements, which are progressively acute with each new generation of supercomputers. However, significant research efforts are required to unlock the computing power of leading-edge systems, currently referred to as pre-Exascale systems, based on increasingly complex architectures. In this paper, we present the approach implemented in the computational mechanics code Alya. We describe in detail the parallelization strategy implemented to fully exploit the different levels of parallelism, together with a novel co-execution method for the efficient utilization of heterogeneous CPU/GPU architectures. The latter is based on a multi-code co-execution approach with a dynamic load balancing mechanism. The assessment of the performance of all the proposed strategies has been carried out for airplane simulations on the POWER9 architecture accelerated with NVIDIA Volta V100 GPUs., This work is partially supported by the BSC-IBM Deep Learning Research Agreement, under JSA \Application porting, analysis and optimization for POWER and POWER AI". It has also been partially supported by the EX-CELLERAT project funded by the European Commission's ICT activity of the H2020 Programme under grant agreement number: 823691. It has also received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement number: 846139 (Exa-FireFlows). This paper expresses the opinions of the authors and not necessarily those of the European Commission. The European Commission is not liable for any use that may be made of the information contained in this paper. This work has also been nan- cially supported by the Ministerio de Economia, Industria y Competitividad, of Spain (TRA2017-88508-R). The computing experiments of this paper have been performed on the resources of the Barcelona Supercomputing Center., Peer Reviewed, Postprint (author's final draft)