Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Investment planning in multi-vector energy systems: definition of key performance indicators

  • Hoffmann, Martha
  • Puranik, Sanket
  • Juanpera Gallel, Marc|||0000-0003-0970-7953
  • Martín-Rapún, José M.
  • Tuiskula, Heidi
  • Blechinger, P.
With the rising focus on integrating high shares of renewable energy into energy supply systems, the need to meet the viability of these renewable sources becomes pressing. Apart from storing electricity in electrochemical storage units, the concept of sector coupling could promise to provide the needed flexibility and storage capacities. A strong metric is needed to determine the viability and economic feasibility of different sector-coupled energy systems. This conference study presents an empirical method to develop a list of key performance indicators (KPIs), as a direct adaption of the KPI of the energy system with a single energy vector is not always possible. The list was developed based on a stakeholder workshop within the H2020 research project E-Land. The authors proposed the introduction of three new indicators for the evaluation of sector-coupled energy systems, namely degree of autonomy, levelised cost of energy and degree of sector coupling. A sector-coupled case study is evaluated to validate the performance of such new indicators while proving their utility to better assist decision-making., E-LAND project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 824388. The information and views set out in this study are those of the author(s) and do not necessarily reflect the official opinion of the European Union. Neither the European Union institutions and bodies nor any person acting on their behalf may be held responsible for the use which may be made of the information contained therein., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multi-state techno-economic model for optimal dispatch of grid connected hydrogen electrolysis systems operating under dynamic conditions

  • Matute, G.
  • Yusta, J.M.
  • Beyza, J.
  • Correas, L.C.
The production of hydrogen through water electrolysis is a promising pathway to decarbonize the energy sector. This paper presents a techno-economic model of electrolysis plants based on multiple states of operation: production, hot standby and idle. The model enables the calculation of the optimal hourly dispatch of electrolyzers to produce hydrogen for different end uses. This model has been tested with real data from an existing installation and compared with a simpler electrolyzer model that is based on two states. The results indicate that an operational strategy that considers the multi-state model leads to a decrease in final hydrogen production costs. These reduced costs will benefit businesses, especially while electrolysis plants grow in size to accommodate further increases in demand.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Investment planning in multi-vector energy systems: definition of key performance indicators

  • Hoffmann, Martha
  • Puranik, Sanket
  • Juanpera Gallel, Marc
  • Martín-Rapún, José M.
  • Tuiskula, Heidi
  • Blechinger, P.
With the rising focus on integrating high shares of renewable energy into energy supply systems, the need to meet the viability of these renewable sources becomes pressing. Apart from storing electricity in electrochemical storage units, the concept of sector coupling could promise to provide the needed flexibility and storage capacities. A strong metric is needed to determine the viability and economic feasibility of different sector-coupled energy systems. This conference study presents an empirical method to develop a list of key performance indicators (KPIs), as a direct adaption of the KPI of the energy system with a single energy vector is not always possible. The list was developed based on a stakeholder workshop within the H2020 research project E-Land. The authors proposed the introduction of three new indicators for the evaluation of sector-coupled energy systems, namely degree of autonomy, levelised cost of energy and degree of sector coupling. A sector-coupled case study is evaluated to validate the performance of such new indicators while proving their utility to better assist decision-making., E-LAND project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 824388. The information and views set out in this study are those of the author(s) and do not necessarily reflect the official opinion of the European Union. Neither the European Union institutions and bodies nor any person acting on their behalf may be held responsible for the use which may be made of the information contained therein., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Definition of Residential Power Load Profiles Clusters Using Machine Learning and Spatial Analysis

  • Flor Ambrosi, Mario Alberto
  • Herraiz Jaramillo, Sergio
  • Contreras, Ivan
This study presents a novel approach for discovering actionable knowledge and exploring data-based models from data recorded by household smart meters. The proposed framework is supported by a machine learning architecture based on the application of data mining methods and spatial analysis to extract temporal and spatial restricted clusters of characteristic monthly electricity load profiles. In addition, it uses these clusters to perform short-term load forecasting (1 week) using recurrent neural networks. The approach analyses a database with measurements of 1000 smart meters gathered during 4 years in Guayaquil, Ecuador. Results of the proposed methodology led us to obtain a precise and efficient stratification of typical consumption patterns and to extract neighbour information to improve the performance of residential energy consumption forecasting, The University of Girona and SENESCYT-Ecuador awarded the author with a pre-doctoral grant of Secretaría Nacional de Educación Superior, Ciencia, Tecnología e Innovación, (SENESCYT)— Ecuador. This work has been partially funded by the grant PID2020-117171RA-I00 funded by MCIN/AEI/10.13039/501100011033, the Government of Catalonia under 2017SGR1551 and the E-LAND project which received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 824388
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multi-vector energy management system including scheduling electrolyser, electric vehicle charging station and other assets in a real scenario

  • Massana i Raurich, Joaquim
  • Burgas Nadal, Llorenç
  • Herraiz Jaramillo, Sergio
  • Colomer Llinàs, Joan
  • Pous i Sabadí, Carles
Today, in the field of energy, the main goal is to reduce emissions with the aim of maintaining a clean environment. To reduce energy consumption from fossil fuels, new tools for micro-grids have been proposed. In the context of multi-vector energy management systems, the present work proposes an optimal scheduler based on genetic algorithms to manage flexible assets in the energy system, such as energy storage and manageable demand. This tool is applied to a case study for a Spanish technology park (360 kW consumption peak) with photovoltaic and wind generation (735 kW generation peak), hydrogen production (15 kW), and electric and fuel cell charging stations. It provides an hourly day-ahead scheduling for the existing flexible assets: the electrolyser, the electric vehicle charging station, the hydrogen refuelling station, and the heating, ventilation, and air conditioning system in one building of the park. A set of experiments is carried out over a period of 14 days, using real data and performing computations in real time, in order to test and validate the tool. The analysis of results show that the solution maximises the use of local renewable energy production (demand is shifted to those hours when there is a surplus of generation), which means a reduction in energy costs, whereas the computational cost allows the implementation of the tool in real time, This work was carried out under the following Horizon 2020 European projects: E-Land (grant agreement ID: 824388) and FEVER (grant agreement ID: 864537), Open access funding was provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Multi-vector energy optimization tools for energy islands

  • Puranik, Sanket
  • Tuiskula, Heidi
  • Ilieva, Iliana
  • Torrent-Fontbona, Ferran
  • Colomer Llinàs, Joan
  • Meléndez i Frigola, Joaquim
Synergies between multiple energy vectors can support decarbonization of local energy islands and, at the same time, relieve stress from the electricity grid. Multi-vector energy systems offer flexibility to integrate variable and economic local energy generation. However, the implementation and operation of multi-vector energy systems face technical, societal and business-related challenges. This paper identifies these challenges and proposes different tools to tackle them. These tools are to be developed in the E-LAND project funded by European Union under the H2020 scheme. Special focus of the paper is on developing a method for optimal planning and operation of multi-vector grid considering robustness. Another novelty of technical tool lies in making scheduling decisions on long-term and short-term storage considering demand response as flexibility resource. By combining technological, societal and business tools, the project expects to create multi-vector energy systems accepted by citizens and with viable business model, E-LAND project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 824388
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessment of electric vehicle charging hub based on stochastic models of user profiles

  • Cañigueral Maurici, Marc
  • Burgas Nadal, Llorenç
  • Massana i Raurich, Joaquim
  • Meléndez i Frigola, Joaquim
  • Colomer Llinàs, Joan
A significant challenge in the electric mobility transition is the planning of proper charging infrastructures to incentivize the use of electric vehicles (EV) and guarantee a reliable charging service to EV users. This paper proposes to model generic EV user profiles (e.g. worktime, commuters, etc.) together with a simulation framework to appropriately assess charging hubs that become undersized due to growing EV demand. First, Gaussian Mixture Models (GMM) of different EV user profiles are developed in order to simulate multiple scenarios of EV sessions per day (N). Second, an algorithm is presented to simulate the occupancy of a charging hub based on two parameters: (1) the number of charging points (P) and (2) the connection time limit (H). Finally, the charging hub assessment is performed according to a metric designed to consider the interests of both the EV user and the charging hub operator, recommending the optimal P for expandable hubs, or the optimal H for limited hubs. Both cases are analysed in the validation section of this work employing a real-world use case. Results validate that the presented methodology can be used by EV charging hub operators to achieve a balance between the exploitation of the charging installation and the satisfaction of EV users, The author Marc Cañigueral has been awarded a PhD-scholarship (Ref. FPU18/03626) by the Spanish Ministry of Education and Culture through the Training program for Academic Staff (FPU-programme). This work has been carried out by the research group eXiT (http://exit.udg.edu), awarded with the consolidated research award (SITES group, Ref. 2021 SGR 01125) by the Generalitat de Catalunya, Spain. The research was funded by the European Union Horizon 2020 under E-LAND project grant agreement No 824388, by European Union Horizon Europe under RESCHOOL project grant agreement No 101096490, and founded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR under OptiREC project grant agreement TED2021-131365B-C41, Open Access funding was provided thanks to the CRUE-CSIC agreement with Elsevier, 7
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Flexibility management of electric vehicles based on user profiles: The Arnhem case study

  • Cañigueral Maurici, Marc
  • Meléndez i Frigola, Joaquim
The ever-increasing global adoption of electric vehicles has created both challenges and opportunities for electrical grids and power systems as well as the market itself. Smart charging is broadly presented as a relevant opportunity to provide demand-side flexibility, benefiting both the user and the power system through flexibility aggregators. However, coordinating all sessions for the same optimization objective could be inefficient when the flexibility potential mismatches the flexibility demand. Instead, this paper proposes the user profile concept as a tool to group sessions into similar flexibility levels and then schedule the charging sessions of each user profile according to its most convenient optimization objective. Therefore, a clustering methodology based on a bivariate Gaussian Mixture Models is presented and validated with a real-world data set, resulting in seven different user profiles. The simulation of two smart charging scenarios, first coordinating all flexible sessions and second coordinating two selected user profiles, resulted in a more efficient scheduling in the latter case, obtaining similar results with a 35% fewer sessions shifted and the corresponding reduction in exploitation costs, This work has been carried out within the research group eXiT (http://exit.udg.edu) at the Universitat de Girona - Consolidated Research group (Ref. 2017 SGR 1551) by the Generalitat de Catalunya - and developed under the projects CROWDSAVING (Ref. TIN2016-79726-C2-2-R), co-funded by the Spanish Ministerio de Industria y Competitividad (Agencia Estatal de Investigación), European ERDF funds, and the H2020 project ”E-LAND – (Grant agreement 824388). The author Marc Ca ̃nigueral has been awarded a PhD-scholarship (Ref. FPU18/ 03626) by the Spanish Ministry of Education and Culture through the Training programme for Academic Staff (FPU-programme), Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of occupant presence patterns on energy consumption and its relation to comfort: a case study based on sensor and crowd-sensed data

  • Rusek, Robert
  • Meléndez i Frigola, Joaquim
  • Colomer Llinàs, Joan
Background In recent years, the monitoring of occupant presence patterns has become an imperative for building energy optimization. Very often, there is a significant discrepancy between the building energy performance predicted at the design stage and the actual performance rendered during the building operation. This stems from the difference in user occupancy. In spite of this, user interaction and feedback are rarely taken into account and evidence of the impact of occupant presence patterns on energy consumption is still scarce. Thus, the purpose of this study is to apply crowd-sensing techniques to understand how energy is consumed and how appropriate performance indicators should be defined to provide inputs for building operations regarding more efficient use of resources. Methods Monitoring strategies were implemented in an office lab with controlled variables to collect quantitative data on occupancy patterns, ambient factors and energy consumption. In addition, crowd-sensing techniques were applied to model user activity in different ambient conditions over time and to contrast their occupancy with energy consumption patterns in combination with new inquiry tools to identify how occupants perceive their comfort level. In addition, a set of energy efficiency indicators was used to compare energy performance over different periods. Results It was discovered that there is a strong relation between user occupancy patterns and energy consumption. However, more than 50% of energy was consumed when no user activity was registered. Energy performance indicators revealed that measuring energy efficiency in terms of kWh per surface area encourages a less efficient use of space and, therefore, including a coefficient of person hours is advisable. It was also discovered that users do not fully rely on feedback mechanisms and they prefer to take action to adapt the ambient conditions rather than simply expressing their opinion. Analysis of energy usage during the Covid-19 lock down revealed substantial use of energy contrary to what was expected. This was because home computers were used as terminals only, while the actual tasks were performed on the lab computers, using remote desktop connections, which were turned on 24/7. In addition, energy consumed by each employee at his/her home should be taken into account. Moreover, a set of practical recommendations was formulated, This work was supported by the European Union’s Horizon 2020 E-Land project (Grant agreement 824388), as well as, CROWDSAVING project (Ref: TIN2016-79726-C2-2-R) funded by the Spanish Ministry of Economic Affairs and Digital Transformation
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimal scheduler for energy consumption reduction in multi-vector energy management systems: A case study at the Port of Borg

  • Massana i Raurich, Joaquim
  • Burgas Nadal, Llorenç
  • Colomer Llinàs, Joan
  • Sumper, Andreas
  • Herraiz Jaramillo, Sergio
The objective of microgrid operation is to supply the energy demanded by the loads at minimum cost. To achieve this goal, new tools are being proposed in the literature, such as the use of optimal schedulers in the field of multi-vector management systems. An optimal scheduler provides the hourly schedule of the flexible loads that exist in a microgrid to maximize the use of local renewable resources. This work aims to investigate the application in the context of five optimization algorithms in terms of energy and computation costs and to demonstrate how optimal schedulers can contribute significantly to reducing energy operating costs in new and real microgrid scenarios. The analysis of the algorithms is carried out through an experimental process on the existing installations at Port of Borg (Norway), which contains photovoltaic production and different types of flexible assets, such as cranes, electric vehicle charging stations, and electrical storage. Real data gathered at the port's premises is used to assess the energy cost reduction when the optimal scheduler is part of the energy management system, and the computations are performed in real time to apply the proposed schedule to the pilot. The results show how the use of optimal schedulers can reduce operation costs up to 17.2%, augmenting local energy production utilization, and that using two OS algorithms in cascade can also reduce the computation time, This project was undertaken by the eXiT research group, recipient of the established research distinction (SITES group, Ref. 2021 SGR 01125) granted by the Generalitat de Catalunya. The research received funding from the European Union Horizon 2020 under E-Land project grant agreement No 824388, from the European Union Horizon Europe under RESCHOOL project grant agreement No 101096490, and from MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR under OptiREC project grant agreement TED2021-131365B-C41. The work of Andreas Sumper was supported by the Catalan Institution for Research and Advanced Studies (ICREA) Academia Program, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier, 7