Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robust Downlink Mechanism for Industrial Internet of Things Using LoRaWAN Networks

  • TODOLI FERRANDIS, DAVID
  • Silvestre-Blanes, Javier|||0000-0001-7091-0040
  • Sempere Paya, Víctor Miguel|||0000-0001-9271-2010
[EN] The adoption of LoRaWAN as a technology for wireless deployments in many applications, such as smart cities or industry 4.0, still presents challenges such as energy consumption, robustness, or reduced throughput in harsh, noisy scenarios. Class B is a MAC mode that allows better performance in downlink traffic but has difficulties regarding scalability and its response to channel interference. This article introduces, via simulation software, the possibility of testing deployments, adding interference sources that model industrial scenarios, and proposes an adaptive data rate (ADR) mechanism to enhance the operation for downlink and class B devices, called DROB (downlink rate optimization for class B) to study the impact of these conditions in a network with detailed event characterization., The research leading to these results received funding from the Horizon 2020 Program of the European Commission under Grant Agreement No. 825631 "Zero Defect Manufacturing Platform (ZDMP)". It was also partially supported by the MCyU (Spanish Ministry of Science and Universities) under the project ATLAS (PGC2018-094151-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Matheuristic Algorithm for Job-Shop Scheduling Problem Using a Disjunctive Mathematical Model

  • Guzmán-Ortiz, Brunnel Eduardo
  • Andres, B.|||0000-0002-7920-7711
  • Poler, R.|||0000-0003-4475-6371
[EN] This paper focuses on the investigation of a new efficient method for solving machine scheduling and sequencing problems. The complexity of production systems significantly affects companies, especially small- and medium-sized enterprises (SMEs), which need to reduce costs and, at the same time, become more competitive and increase their productivity by optimizing their production processes to make manufacturing processes more efficient. From a mathematical point of view, most real-world machine scheduling and sequencing problems are classified as NP-hard problems. Different algorithms have been developed to solve scheduling and sequencing problems in the last few decades. Thus, heuristic and metaheuristic techniques are widely used, as are commercial solvers. In this paper, we propose a matheuristic algorithm to optimize the job-shop problem which combines a genetic algorithm with a disjunctive mathematical model, and the Coin-OR Branch & Cut open-source solver is employed. The matheuristic algorithm allows efficient solutions to be found, and cuts computational times by using an open-source solver combined with a genetic algorithm. This provides companies with an easy-to-use tool and does not incur costs associated with expensive commercial software licenses., The research leading to these results received funding from the European Union H2020 Program with grant agreements No. 825631 "Zero-Defect Manufacturing Platform (ZDMP)" and No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)". This work was supported by the Conselleria de Educación, Investigación, Cultura y Deporte Generalitat Valenciana for hiring predoctoral research staff with Grant (ACIF/2018/170) and the European Social Fund with the Grant Operational Programme of FSE 2014 2020, the Valencian Community (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Multi-tenant Data Management in Collaborative Zero Defect Manufacturing

  • Fraile Gil, Francisco|||0000-0002-3275-7740
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Montalvillo, Leticia
  • Rodríguez-Sánchez, María De Los Ángeles
  • Navarro, Héctor
[EN] This research paper describes different patterns and best practices to effectively implement multi-tenancy of production sensor data in collaborative applications. The paper explains the design considerations taken to support multi-tenancy in the Zero Defects Manufacturing Platform (ZDMP), using concrete collaborative use cases as an example. The main objective is to provide an overview of multi-tenancy as an enabler of collaborative use cases in digital manufacturing platforms, describe the different design patterns, the main trade-offs, and best practices., This work was supported in part by the European Commission under the Grant Agreement 825631. The author María Ángeles Rodríguez was supported by the Generalitat Valenciana (Conselleria de Educación, Investigación, Cultura y Deporte) under Grant-Agreement ACIF/2019/021.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Data of a novel MILP model for the production, lot-sizing and scheduling of automotive plastic components on parallel flexible injection machines

  • Andres, B.|||0000-0002-7920-7711
  • Poler, R.|||0000-0003-4475-6371
  • Guzmán Ortiz, Brunnel Eduardo
[EN] The data set contains the input/output data that was entered into the mathematical model to develop the case study. The data is synthetically generated and developed with an algorithm encoded in Python 3.7, the parameters for programming the algorithm are based on real data from a company in the automotive sector and the values have been structured according to the indices defined in the model. Input/output data details have been added to make the model replicable., This work was supported by the Conselleria de Educación, Investigación, Cultura y Deporte - Generalitat Valenciana for hiring predoctoral research staff with Grant (ACIF/2018/170) and European Social Fund with Grant Operational Program of FSE 2014-2020, the Valencian Community, and the authors would like to acknowledge the support of the researchers participating in the collaborative projects ‘Cloud Collaborative Manufacturing Networks’ (C2NET) (http://c2net-project.eu/), which has received funding from the EU Horizon 2020 Research and Innovation Programme with grant agreement No. 636909. “Zero Defects Manufacturing Platform” (ZDMP) (www.zdmp.eu) which has received funding from the EU Horizon 2020 Research and Innovation Programme with grant agreement No. 825631
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Models, Algorithms and Digital Technologies for the Automation and Collaboration of Connected Smart Factories in an Industry 4.0 Environment

  • Cañas Sánchez, Héctor Enrique
[ES] Los sistemas tradicionales de planificación y control de la producción (PPC) se centran en producir lo que demanda el mercado, con la calidad, el calendario y los volúmenes previstos al mínimo coste, ajustándose al mismo tiempo a las disrupciones de la cadena de suministro. La exploración e implementación de nuevos avances tecnológicos en el marco de la industria 4.0 (I4.0), como sistemas ciberfísicos (CPS), fabricación en la nube (CMfg), fabricación aditiva (AM), big data, inteligencia artificial y la Internet de las cosas (IoT), podrían cambiar aspectos organizativos tales como las responsabilidades de PPC. En este contexto, no se identificaron estudios sobre un sistema para la toma de decisiones, arquitecturas y marcos conceptuales para los nuevos sistemas inteligentes de PPC e I4.0. En este contexto de nuevos cambios tecnológicos y organizativos a los que tienen que hacer frente las pequeñas y medianas empresas (PYMEs), surge el problema de diseñar herramientas de PPC que permitan la integración y colaboración de las operaciones de producción. Así, basándose en las nuevas tecnologías de producción digital y en las herramientas organizativas que darán soporte a las fábricas inteligentes conectadas del futuro, se identificó la falta de un sistema integrado de PPC e I4.0. Esta tesis doctoral es un compendio de artículos que abordan una amplia revisión bibliográfica sobre la PPC en un entorno de I4.0. También, se propone un marco conceptual y el diseño de modelos y algoritmos para la toma de decisiones y dar soporte a las funciones de PPC en un contexto digital I4.0 basado en las nuevas tecnologías de producción digital y herramientas organizativas que darán soporte a las fábricas inteligentes colaborativas y conectadas del futuro. Los modelos matemáticos y algoritmos propuestos se centran en resolver el problema del diseño y planificación de una cadena de suministro sostenible y resiliente en la que las decisiones estratégicas y tácticas se toman de forma integrada. Los modelos, algoritmos y método de resolución se han programado en Python. Los modelos han sido validados mediante un software que genera instancias de datos sintéticos y permite evaluar la complejidad computacional de los mismos. El desarrollo de este tipo de modelos y algoritmos supone una contribución al ámbito académico e investigador y, concretamente, en el área de PPC., [CA] En l'actualitat, els sistemes tradicionals de planificació i control de la producció (PPC) se centren en produir el que demanda el mercat, amb la qualitat, el calendari i els volums previstos al mínim cost, ajustant-se al mateix temps a les pertorbacions. L'exploració i implementació de nous avanços tecnològics, com CPS, fabricació en el núvol (CMfg), fabricació additiva (AM), big data, intelligència artificial i el IoT, podrien canviar aspectes organitzatius, com les responsabilitats de PPC. En aquest context, no es van identificar estudis sobre un sistema per a la presa de decisions, arquitectures i marcs conceptuals per als nous sistemes intelligents de PPC i I4.0. En aquest context de nous canvis tecnològics i organitzatius als quals han de fer front les petites i mitjanes empreses (PIME), sorgeix el problema de dissenyar eines de PPC que permeten la integració i collaboració de les operacions de producció. Així, basant-se en les noves tecnologies de producció digital i en les eines organitzatives que donaran suport a les fàbriques intelligents connectades del futur, es va identificar la falta d'un sistema integrat de la PPC i I4.0. Aquesta investigació és un compendi d'articles que aborden una àmplia revisió bibliogràfica sobre la PPC en un entorn I4.0. També proposa un marc conceptual i el disseny de models i algorismes per a la presa de decisions i per a donar suport a les funcions de PPC en un context digital I4.0 basat en les noves tecnologies de producció digital i eines organitzatives que donaran suport a les fàbriques intelligents col·laboratives i connectades del futur. Els models matemàtics i algorismes proposats se centren en resoldre el problema del disseny d'una cadena de subministrament sostenible i resistent en la qual les decisions estratègiques i tàctiques es prenen de forma integrada. Els models, algorismes i mètode de resolució s'han programat en Python. Els models han sigut validats mitjançant un programari que genera instàncies de dades sintètiques i permet avaluar la complexitat computacional dels models. El desenvolupament d'aquesta mena de models i algorismes suposa una important contribució a l'àmbit acadèmic., [EN] Currently, traditional production planning and control (PPC) systems focus on producing what the market demands with the expected quality, schedule and volumes at a minimum cost, while adjusting for disruption. The exploration and implementation of new technological advances, such as CPS, cloud manufacturing (CMfg), additive manufacturing (AM), big data, artificial intelligence and the Internet of Things (IoT), could change organisational aspects like PPC responsibilities. In this context, no studies on a system for decision making, architectures and conceptual frameworks for the new intelligent systems of PPC and industry 4.0 (I4.0) have been identified. In this context of new technological and organisational changes that small-and medium-sized enterprises (SMEs) have to face, the problem of designing PPC tools that enable the integration and collaboration of production operations arises. Thus, based on the new digital production technologies and organisational tools that will support the connected smart factories of the future, lack of an integrated PPC and I4.0 system was identified. The present doctoral thesis is a compendium of articles addressing a comprehensive literature review on PPC in an I4.0 environment. It also proposes a conceptual framework and the design of models and algorithms for decision making and to support PPC functions in a digital I4.0 context based on the new digital production technologies and organisational tools that will support the collaborative and connected smart factories of the future. The proposed mathematical models and algorithms focus on solving the problem of designing a sustainable and resilient supply chain where strategic and tactical decisions are made in an integrated way. The models, algorithms and resolution method have been programmed in Python. The models have been validated by means of software that generates synthetic data instances and allows the models' computational complexity to be evaluated. The development of this type of models and algorithms is a significant contribution to the academic field., I would like to thank the following projects and universities for having financed the publications included in this doctoral thesis: • European Commission Horizon 2020 project entitled "Crop diversification and low-input farming cross Europe: From practitioners' engagement and ecosystems services to increased revenues and value chain organisation' (Diverfarming), grant agreement 728003. • Spanish Ministry of Science, Innovation and Universities project entitled 'Optimization of zero-defect production technologies enabling supply chains 4.0 (CADS4.0)' (RTI2018-101344-B-I00). • European Union H2020 program with grant agreement no. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)". • European Union H2020 Program with grant agreement nº 825631 "Zero- Defect Manufacturing Platform (ZDMP)".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Smart manufacturing scheduling: A literature review

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] Within the scheduling framework, the potential of digital twin (DT) technology, based on virtualisation and intelligent algorithms to simulate and optimise manufacturing, enables an interaction with processes and modifies their course of action in time synchrony in the event of disruptive events. This is a valuable capability for automating scheduling and confers it autonomy. Automatic and autonomous scheduling management can be encouraged by promoting the elimination of disruptions due to the appearance of defects, regardless of their origin. Hence the zero-defect manufacturing (ZDM) management model oriented towards zero-disturbance and zero-disruption objectives has barely been studied. Both strategies combine the optimisation of production processes by implementing DTs and promoting ZDM objectives to facilitate the modelling of automatic and autonomous scheduling systems. In this context, this particular vision of the scheduling process is called smart manufacturing scheduling (SMS). The aim of this paper is to review the existing scientific literature on the scheduling problem that considers the DT technology approach and the ZDM model to achieve self-management and reduce or eliminate the need for human intervention. Specifically, 68 research articles were identified and analysed. The main results of this paper are to: (i) find methodological trends to approach SMS models, where three trends were identified; i.e. using DT technology and the ZDM model, utilising other enabling digital technologies and incorporating inherent SMS capabilities into scheduling; (ii) present the main SMS alignment axes of each methodological trend; (iii) provide a map to classify the literature that comes the closest to the SMS concept; (iv) discuss the main findings and research gaps identified by this study. Finally, managerial implications and opportunities for further research are identified., This work was supported by the Spanish Ministry of Science, Innovation and Universities project entitled 'Optimisation of zero-defects production technologies enabling supply chains 4.0 (CADS4.0) ' (RTI2018-101344-B-I00) , the European Union H2020 research and innovation programme with grant agreement No. 825631 "Zero Defect Manufacturing Platform (ZDMP) " and the European Union H2020 research and innovation programme with agreement No. 958205 "In-dustrial Data Services for Quality Control in Smart Manufacturing (i4Q) ".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Digital twin for supply chain master planning in zero-defect manufacturing

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] Recently, many novel paradigms, concepts and technologies, which lay the foundation for the new revolution in manufacturing environments, have emerged and make it faster to address critical decisions today in supply chain 4.0 (SC4.0), with flexibility, resilience, sustainability and quality criteria. The current power of computational resources enables intelligent optimisation algorithms to process manufacturing data in such a way, that simulating supply chain (SC) planning performance in real time is now possible, which allows relevant information to be acquired so that SC nodes are digitally interconnected. This paper proposes a conceptual framework based on a digital twin (DT) to model, optimise and prescribe a SC¿s master production schedule (MPS) in a zero-defect environment. The proposed production technologies focus on the scientific development and resolution of new models and optimisation algorithms for the MPS problem in SC4.0., The research leading to these results received funding from the EuropeanUnion H2020 Program with grant agreement No. 825631 Zero Defect Manufacturing Platform(ZDMP) and with grant agreement No. 958205 Industrial Data Services for Quality Control inSmart Manufacturing (i4Q) and from the Spanish Ministry of Science, Innovation and Universities under grant agreement RTI2018-101344-B-I00 Optimisation of zero-defects productiontechnologies enabling supply chains 4.0 (CADS4.0).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Novel MILP Model for the Production, Lot Sizing, and Scheduling of Automotive Plastic Components on Parallel Flexible Injection Machines with Setup Common Operators

  • Andres, B.|||0000-0002-7920-7711
  • Poler, R.|||0000-0003-4475-6371
  • Guzmán-Ortiz, Brunnel Eduardo
[EN] In this article, a mixed integer linear program (MILP) model is proposed for the production, lot sizing, and scheduling of automotive plastic components to minimize the setup, inventory, stockout, and backorder costs, by taking into account injection molds as the main index to schedule on parallel flexible injection machines. The proposed MILP considers the minimum and maximum inventory capacities and penalizes stockout. A relevant characteristic of the modeled problem is the dependence between mold setups to produce plastic components. The lot sizing and scheduling problem solution results in the assignment of molds to machines during a specific time period and in the calculation of the number of components to be produced, which is often called lot size, following a sequence-dependent setup time. Depending on the machine on which the mold is setup, the number of units to be produced will be distinct because machines differ from one another. The stock coverage, defined in demand days, is also included in the MILP to avoid backorders, which is highly penalized in the automotive supply chain. Added to this, the proposed model is extended by considering setup common operators to respond to and fulfill the constraints that appear in automotive plastic enterprises. In this regard, the MILP presented solves a lot-sizing and scheduling problem, emerged in a second-tier supplier of a real automotive supply chain. Finally, this article validates the MILP by performing experiments with different sized instances, including small, medium, and large. The large-sized dataset is characterized by replicating the amount of data used in the real enterprise, which is the object of this study. The goodness of the model is evaluated with the computational time and the deviation of the obtained results as regards to the optimal solution., Thiis work was supported by the Conselleria de Educacion, Investigacion, Cultura y Deporte-Generalitat Valenciana for hiring predoctoral research staff with Grant no. ACIF/2018/170 and European Social Fund with Grant Operational Program of FSE 2014-2020, the Valencian Community, and the authors would like to acknowledge the support of the researchers participating in the collaborative projects 'Cloud Collaborative Manufacturing Networks' (C2NET) (http://c2net-project.eu/), which has received funding from the EU Horizon 2020 Research and Innovation Programme with grant agreement no. 63690, and "Zero Defects Manufacturing Platform" (ZDMP) (http://www.zdmp.eu), which has received funding from the EU Horizon 2020 Research and Innovation Programme with grant agreement no. 825631.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Relational network of innovation ecosystems generated by digital innovation hubs: a conceptual framework for the interaction processes of DIHs from the perspective of collaboration within and between their relationship levels

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
  • Ferreira, José
  • Jardim-Goncalves, R.
[EN] Collaboration plays a key role in the success attained to date by networks of innovation ecosystems generated around entities known as Digital Innovation Hubs (DIHs), recently created following European Commission initiatives to boost the digitisation of the European economic fabric. This article proposes a conceptual framework that brings together, defines, structures and relates the concepts involved in the collaborative interaction processes within and between these innovation ecosystems to allow comprehensive conceptualisation. The developed framework also provides an approach that helps to tangibilise collaboration as a management process. Here the goal is to ultimately move towards not only qualitative, but also quantitative modelling to bridge the research gap in the state of the art in this respect. The data-driven business-ecosystem-skills-technology (D-BEST) model, devised to configure DIHs service portfolios in a collaborative context, provides the reference basis for the interorganisational asset transfer methodology (IOATM). This is the keystone that structures the framework and constitutes its main contribution. Through the IOATM, this conceptual framework points out collaboration quantification, and serves as a lever for its modelling to deal with collaboration accounting by: turning it into a more controllable management element; guiding practitioners' efforts to improve collaborative processes efficiency with an approach that pursues objectivity and maximises synergies., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The research leading to these results received funding from the European Union H2020 Research and Innovation Programme with Grant Agreements No. 872548 Fostering DIHs for Embedding Interoperability in Cyber Physical Systems of European SMEs (DIH4CPS), No. 825631 Zero-Defect Manufacturing Platform (ZDMP), and No. 958205 Industrial Data Services for Quality Control in Smart Manufacturing (i4Q) , from the European Union Horizon Europe Programme with Grant Agreement No. 101057294 AI Driven Industrial Equipment Product Life Cycle Boosting Agility, Sustainability and Resilience (AIDEAS), and from the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana entitled Industrial Production and Logistics Optimisation in Industry 4.0 (i4OPT, Ref. PROMETEO/2021/065).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A data model for collaborative manufacturing environments

  • Andres, B.|||0000-0002-7920-7711
  • Poler, R.|||0000-0003-4475-6371
  • Sanchis, R.|||0000-0002-5495-3339
[EN] This paper addresses the problem of information exchange required for collaborative manufacturing planning processes at supply network levels. For a few years now, the traditional manufacturing planning paradigm has shifted toward optimizing collaborative plans at the inter-enterprise level driven by cloud-enabled tools (manufacturing platforms), from which the need to share data between networked partners arises to solve intra-enterprise plans in real-time scenarios. Collaboration among enterprises has to increasingly deal with the sharing the information encoded in ontologies. Cloud repositories are seen as collaboration mechanisms whose main aim is to exchange data regardless of their origins and nature. In line with this, industrial planning research is encouraged by solving problems regarding information exchange, sharing and storage in cloud collaborative environments. The contribution of this research paper lies in identifying information used by manufacturing enterprises when they follow their planning processes in a cloud collaborative manufacturing context to propose common formalized data terminologies. This paper introduces a novel data model for collaborative manufacturing environments (CMData) by building a taxonomy of data concepts to represent information about the replenishment, production and delivery planning domains. Although there are standards aimed at exchanging product data that covers different parts of the history of a product from conceptual design to disposal, this proposal is defined as a detailed version of such current standard initiatives covering the specific area in the domain of production planning and supply chain collaboration. Moreover, this proposal complements and gives an answer to the new cloud collaborative business needs from industry. The CMData has the following objectives: (i) to solve problems related with data interpretation; (ii) to solve the sharing between enterprise legacy systems and cloud environments through the mapping procedure and (iii) to identify the required data coming from different enterprises to collaboratively compute the joint planning activities. The proposed CMData are validated through their application in the collaborative production scheduling plan of a second-tier supplier and a first-tier supplier in the automotive industry. Future work and open issues are also discussed. (C) 2021 Elsevier B.V. All rights reserved. Keywords, This work has received funding from the European Union's Horizon 2020 research and innovation programme with grant agreements No. 636909 and No. 825631.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

A Standardised Data Model for Collaborative Manufacturing CMData

  • Andres, B.|||0000-0002-7920-7711
  • Poler, R.|||0000-0003-4475-6371
  • Sanchis, R.|||0000-0002-5495-3339
Novel standardised data model for collaborative manufacturing environments (CMData), building a taxonomy of data concepts to represent information related to the replenishment, production and delivery planning domains, The authors would like to acknowledge the support of the researchers participating in the collaborative projects “Cloud Collaborative Manufacturing Network” (C2NET) (www.c2net-project.eu) and “Zero Defects Manufacturing Platform” (ZDMP) (www.zdmp.eu).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Toward smart manufacturing scheduling from an ontological approach of job-shop uncertainty sources

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] An integral application of the enabling technologies of Industry 4.0 in the job-shop scheduling problem (JSSP) must contemplate the automation and autonomy of the involved decision-making processes as a goal, which is the main purpose of the smart manufacturing scheduling (SMS) paradigm. In a real production context, uncertainty acts as a barrier that hinders this goal being met and, therefore, any SMS model should integrate uncertainty generators in one way or another. This paper proposes an ontological framework that identifies and structures the entities shaping the joint domain formed by the job-shop scheduling process in its itinerary toward the SMS paradigm, the sources of uncertainty that it faces, and the interrelationship type that link these entities. This ontological framework will serve in future research as a conceptual basis to design new quantitative models that, from a holistic perspective, will address the stochasticity of manufacturing environments and incorporate the management of disturbances into the realtime resolution of automatic and autonomous job-shop scheduling., The research leading to these results received funding from grant RTI2018-101344-B-I00 of MCIN/AEI/10.13039/501100011033 and ¿ERDF A way of making Europe¿, from the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana entitled "Industrial Production and Logistics Optimization in Industry 4.0" (i4OPT) (Ref. PROMETEO/2021/065)", and from the European Union H2020 programs with grant agreements No. 825631 ¿Zero-Defect Manufacturing Platform (ZDMP)¿, No. 872548 "Fostering DIHs for Embedding Interoperability in Cyber-Physical Systems of European SMEs (DIH4CPS)", and No. 958205 ¿Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)¿.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reference Models for Digital Manufacturing Platforms

  • Fraile Gil, Francisco|||0000-0002-3275-7740
  • Sanchis, R.|||0000-0002-5495-3339
  • Poler, R.|||0000-0003-4475-6371
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
[EN] This paper presents an integrated reference model for digital manufacturing platforms, based on cutting edge reference models for the Industrial Internet of Things (IIoT) systems. Digital manufacturing platforms use IIoT systems in combination with other added-value services to support manufacturing processes at different levels (e.g., design, engineering, operations planning, and execution). Digital manufacturing platforms form complex multi-sided ecosystems, involving different stakeholders ranging from supply chain collaborators to Information Technology (IT) providers. This research analyses prominent reference models for IIoT systems to align the definitions they contain and determine to what extent they are complementary and applicable to digital manufacturing platforms. Based on this analysis, the Industrial Internet Integrated Reference Model (I3RM) for digital manufacturing platforms is presented, together with general recommendations that can be applied to the architectural definition of any digital manufacturing platform., This work has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 825631 and from the Operational Program of the European Regional Development Fund (ERDF) of the Valencian Community 2014-2020 IDIFEDER/2018/025.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Software de investigación Software (Software)

Synthetic input data generator for a MILP model for lot-sizing and scheduling of automotive plastic components with availability of raw materials and packaging

  • Guzmán Ortiz, Brunnel Eduardo
  • Andres, B.|||0000-0002-7920-7711
  • Poler, R.|||0000-0003-4475-6371
The Python code generates synthetic input data. The dataset contains the input data to develop the experiments for the mathematical model (mixed integer linear programming model for lot-sizing and scheduling of automotive plastic components with availability of raw materials and packaging), This work was supported by the Conselleria de Educación, Investigación, Cultura y Deporte - Generalitat Valenciana for hiring predoctoral research staff with Grant (ACIF/2018/170) and European Social Fund with Grant Operational Program of FSE 2014-2020, the Valencian Community
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A capacitated lot-sizing model with sequence-dependent setups, parallel machines and bi-part injection moulding

  • Mula, Josefa|||0000-0002-8447-3387
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
  • Andres, B.|||0000-0002-7920-7711
  • Poler, R.|||0000-0003-4475-6371
  • Sanchis, R.|||0000-0002-5495-3339
[EN] This paper aims to propose a model for solving a capacitated lot-sizing problem with sequence-dependent setups (CLSD) and parallel machines in a bi-part injection moulding (BPIM) context that consists of injecting two different parts or products into the same mould in separate injection cavities. These two parts require the same sequence order and available capacity at the same instant, but generate different part inventories. The addressed problem should be considered a multi-machine CLSD-BPIM one. We provide a mixed integer linear programming (MILP) model for it. The proposed model is based on a real-world case study from a second-tier supplier of the automotive sector. In sequence setup, inventory and resource setup costs terms, the benefits of the proposed multi-machine CLSD-BPIM model are validated by comparing it with a single-machine CLSD-BPIM model that replicates the current planning scenario carried out in the company under study. Additionally, random instances based on the real problem have been generated and tested. The computational results exhibit optimal solutions for the small instances with an average of 0.2-second solution time, the medium instances present average gaps of 0.47% with 2.6 h and large instances present average gaps of 4% with 6 h solution time., The research leading to these results was supported in part by the European Commission under the Grant Agreement No. 825631 `Zero Defects Manufacturing Platform' (ZDMP) (www.zdmp.eu); and the Spanish Ministry of Science, Innovation and Universities project entitled `Optimisation of zero-defects production technologies enabling supply chains 4.0 (CADS4.0)' (RTI2018-101344-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reinforcement learning applied to production planning and control

  • Esteso, Ana|||0000-0003-0379-8786
  • Peidro Payá, David|||0000-0001-8678-6881
  • Mula, Josefa|||0000-0002-8447-3387
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
[EN] The objective of this paper is to examine the use and applications of reinforcement learning (RL) techniques in the production planning and control (PPC) field addressing the following PPC areas: facility resource planning, capacity planning, purchase and supply management, production scheduling and inventory management. The main RL characteristics, such as method, context, states, actions, reward and highlights, were analysed. The considered number of agents, applications and RL software tools, specifically, programming language, platforms, application programming interfaces and RL frameworks, among others, were identified, and 181 articles were sreviewed. The results showed that RL was applied mainly to production scheduling problems, followed by purchase and supply management. The most revised RL algorithms were model-free and single-agent and were applied to simplified PPC environments. Nevertheless, their results seem to be promising compared to traditional mathematical programming and heuristics/metaheuristics solution methods, and even more so when they incorporate uncertainty or non-linear properties. Finally, RL value-based approaches are the most widely used, specifically Q-learning and its variants and for deep RL, deep Q-networks. In recent years however, the most widely used approach has been the actor-critic method, such as the advantage actor critic, proximal policy optimisation, deep deterministic policy gradient and trust region policy optimisation., The funding for the research work that has led to the obtained results came from the following grants: CADS4.0 (Ref. RTI2018-101344-B-I00) and NIOTOME (Ref. RTI2018102020-B-I00), financed byMCIN/AEI/10.13039/501100011033 and 'ERDF A way of making DEurope'; the EU H2020 research and innovation programme with grant numbers 825631 'Zero-Defect Manufacturing Platform (ZDMP)' and 958205 'Industrial Data Services for Quality Control in SmartManufacturing (i4Q)'; 'Industrial Production and Logistics Optimization in Industry 4.0' (i4OPT) (Ref. PROMETEO/2021/065) and 'Resilient, Sustainable and PeopleOriented Supply Chain 5.0 Optimization Using Hybrid Intelligence' (RESPECT) (Ref. CIGE/2021/159) Projects were funded by the Generalitat Valenciana (Valencian Regional Government).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Data of a novel MILP model for the production, lot-sizing and scheduling of automotive plastic components on parallel flexible injection machines with setup common operators

  • Andres, B.|||0000-0002-7920-7711
  • Poler, R.|||0000-0003-4475-6371
  • Guzmán Ortiz, Brunnel Eduardo
[EN] The data set contains the input/output data that was entered into the mathematical model to develop the case study. The data is synthetically generated and developed with an algorithm encoded in Python 3.7, the parameters for programming the algorithm are based on real data from a company in the automotive sector and the values have been structured according to the indices defined in the model. Input/output data details have been added to make the model replicable., This work was supported by the Conselleria de Educación, Investigación, Cultura y Deporte - Generalitat Valenciana for hiring predoctoral research staff with Grant (ACIF/2018/170) and European Social Fund with Grant Operational Program of FSE 2014-2020, the Valencian Community, and the authors would like to acknowledge the support of the researchers participating in the collaborative projects ‘Cloud Collaborative Manufacturing Networks’ (C2NET) (http://c2net-project.eu/), which has received funding from the EU Horizon 2020 Research and Innovation Programme with grant agreement No. 636909. “Zero Defects Manufacturing Platform” (ZDMP) (www.zdmp.eu) which has received funding from the EU Horizon 2020 Research and Innovation Programme with grant agreement No. 825631
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An industry maturity model for implementing Machine Learning operations in manufacturing

  • Mateo-Casalí, Miguel Ángel|||0000-0001-5086-9378
  • Boza, Andres|||0000-0002-5429-0416
  • Fraile Gil, Francisco
  • Nazarenko, Artem
[EN] The next evolutionary technological step in the industry presumes the automation of the elements found within a factory, which can be accomplished through the extensive introduction of automatons, computers and Internet of Things (IoT) components. All this seeks to streamline, improve, and increase production at the lowest possible cost and avoid any failure in the creation of the product, following a strategy called Zero Defect Manufacturing . Machine Learning Operations (MLOps) provide a ML-based solution to this challenge, promoting the automation of all product-relevant steps, from development to deployment. When integrating different machine learning models within manufacturing operations, it is necessary to understand what functionality is needed and what is expected. This article presents a maturity model that can help companies identify and map their current level of implementation of machine learning models., The research leading to these results received funding from the European Union H2020 programs with grant agreements No. 825631, “Zero-Defect Manufacturing Platform (ZDMP)” and No. 958205, “Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Smart digital twin for ZDM-based job-shop scheduling

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] The growing digitization of manufacturing processes is revolutionizing the production job-shop by leading it toward the Smart Manufacturing (SM) paradigm. For a process to be smart, it is necessary to combine a given blend of data technologies, information and knowledge that enable it to perceive its environment and to autonomously perform actions that maximize its success possibilities in its assigned tasks. Of all the different ways leading to this transformation, both the generation of virtual replicas of processes and applying artificial intelligence (AI) techniques provide a wide range of possibilities whose exploration is today a far from negligible sources of opportunities to increase industrial companies¿ competitiveness. As a complex manufacturing process, production order scheduling in the job-shop is a necessary scenario to act by implementing these technologies. This research work considers an initial conceptual smart digital twin (SDT) framework for scheduling job-shop orders in a zero-defect manufacturing (ZDM) environment. The SDT virtually replicates the job-shop scheduling issue to simulate it and, based on the deep reinforcement learning (DRL) methodology, trains a prescriber agent and a process monitor. This simulation and training setting will facilitate analyses, optimization, defect and failure avoidance and, in short, decision making, to improve job-shop scheduling., The research that led to these results received funding from the European Union H2020 Programme with grant agreement No. 825631 Zero-Defect Manufacturing Platform (ZDMP) and Grant agreement No. 958205 Industrial Data Services for Quality Control in Smart Manufacturing (i4Q), and from the Spanish Ministry of Science, Innovation and Universities with Grant Agreement RTI2018-101344-B-I00 "Optimisation of zero-defects production technologies enabling supply chains 4.0 (CADS4.0)"
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of Bidirectional ADR-Enabled Class B LoRaWAN Networks in Industrial Scenarios

  • TODOLI FERRANDIS, DAVID
  • Planes, Ana
  • Silvestre-Blanes, Javier|||0000-0001-7091-0040
  • Sempere Paya, Víctor Miguel|||0000-0001-9271-2010
[EN] Low-power wide-area network (LPWAN) technologies are becoming a widespread solution for wireless deployments in many applications, such as smart cities or Industry 4.0. However, there are still challenges to be addressed, such as energy consumption and robustness. To characterize and optimize these types of networks, the authors have developed an optimized use of the adaptative data rate (ADR) mechanism for uplink, proposed its use also for downlink based on the simulator ns-3, and then defined an industrial scenario to test and validate the proposed solution in terms of packet loss and energy., The research leading to these results received funding from the Horizon 2020 Programme of the European Commission under Grant Agreement No. 825631 "Zero Defect Manufacturing Platform (ZDMP)". It was also partially supported by the MCyU (Spanish Ministry of Science and Universities) under the project ATLAS (PGC2018-094151-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Software de investigación Software (Software)

Synthetic input data generator for a MILP model for lot-sizing and scheduling on parallel flexible injection machines with setup common operators

  • Andres, B.|||0000-0002-7920-7711
  • Poler, R.|||0000-0003-4475-6371
  • Guzmán Ortiz, Brunnel Eduardo
[EN] The Python code generates synthetic input data The dataset contains the input data that for the mathematical model to develop the experiments. Launch LSSP_MILP_BASE_MODEL_GeneratorEXEC for generating synthetic input data by using the CLSD-BPIM Generator. The sizes of the indices (products, parts, resources, periods) for the small, medium and large datasets are the ones used in the experiments., This work was supported by the Conselleria de Educación, Investigación, Cultura y Deporte - Generalitat Valenciana for hiring predoctoral research staff with Grant (ACIF/2018/170) and European Social Fund with Grant Operational Program of FSE 2014-2020, the Valencian Community, and the authors would like to acknowledge the support of the researchers participating in the collaborative projects ‘Cloud Collaborative Manufacturing Networks’ (C2NET) (http://c2net-project.eu/), which has received funding from the EU Horizon 2020 Research and Innovation Programme with grant agreement No. 636909. “Zero Defects Manufacturing Platform” (ZDMP) (www.zdmp.eu) which has received funding from the EU Horizon 2020 Research and Innovation Programme with grant agreement No. 825631
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A conceptual framework for multi-objective facility layout planning by a bottom-up approach

  • Pérez-Gosende, Pablo
  • Mula, Josefa|||0000-0002-8447-3387
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
[EN] The purpose of this paper is to present a conceptual framework to facilitate academics and practitioners decision making related to multi-objective facility layout planning (mFLP) by employing a bottom-up approach. Based on a literature survey framed in the mFLP context, this work identified and discussed a set of criteria that have become limitations of the traditional top-down approach. These criteria served as the basis to conceive the proposed conceptual framework. Our conceptual framework formalises FLP as a multi-objective problem by following the two traditional planning phases (block- and detailed phase) in reverse by a bottom-up approach, and by also integrating a third phase, called the refined phase, which has not previously been contemplated in the literature. Apart from identifying the inputs and outputs of each phase, the conceptual framework groups together several objectives related to mFLP that have been recently considered in the literature and formalises and contextualises them according to the planning phase in which they are involved. This is the first time that mFLP is addressed with a bottom-up approach., The research leading to these results received funding from the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana entitled “Industrial Production and Logistics Optimization in Industry 4.0” (i4OPT) (Ref. PROMETEO/2021/065)”, and from the European Union H2020 programmes with grant agreements No. 825631 “Zero-Defect Manufacturing Platform (ZDMP)” and No. 958205 “Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A conceptual framework for smart production planning and control in Industry 4.0

  • Cañas, Héctor
  • Campuzano-Bolarín, Francisco
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] This article aims to introduce the challenge (i.e., integration of new collaborative models and tools) posed by the automation and collaboration of industrial processes in Industry 4.0 (I4.0) smart factories. Small- and medium-sized enterprises (SMEs) are particularly confronted with new technological and organisational changes, but a conceptual framework for production planning and control (PPC) systems in the I4.0 context is lacking. The main contributions of this article are to: (i) identify the functions making up traditional PPC and smart production planning and control in I4.0 (SPPC 4.0); (ii) analyse the impact of I4.0 technologies on PPC systems; (iii) propose a conceptual framework that provides the systematic structuring of how a PPC system operates in the I4.0 context, dubbed SPPC 4.0. Thus SPPC 4.0 is proposed by adopting the axes of the RAMI 4.0 reference architecture model, which compiles and contains the main concepts of PPC systems and I4.0. It also provides the technical description, organisation and understanding of each aspect, which can provide a guide for academic research and industrial practitioners to transform PPC systems towards I4.0 implementations. Finally, theoretical implications and research gaps are provided., The research leading to these results received funding from the European Union H2020 Program with grant agreements No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)" and No. 825631 "Zero-Defect Manufacturing Platform (ZDMP)"; the "Industrial Production and Logistics Optimization in Industry 4.0" (i4OPT) (Ref. PROMETEO/2021/065) project granted by the Valencian Regional Government; and the PAI-12-21 open-access support from the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Software de investigación Software (Software)

Synthetic input data generator for a MILP model for lot-sizing and scheduling on parallel flexible injection machines

  • Andres, B.|||0000-0002-7920-7711
  • Poler, R.|||0000-0003-4475-6371
  • Guzmán Ortiz, Brunnel Eduardo
[EN] The Python code generates synthetic input data. The dataset contains the input data that for the mathematical model to develop the experiments. Launch LSSP_MILP_BASE_MODEL_GeneratorEXEC for generating synthetic input data by using the CLSD-BPIM Generator. The sizes of the indices (products, parts, resources, periods) for the small, medium and large datasets are the ones used in the experiments., This work was supported by the Conselleria de Educación, Investigación, Cultura y Deporte-Generalitat Valenciana for hiring predoctoral research staff with Grant no. ACIF/2018/170 and European Social Fund with Grant Operational Program of FSE 2014-2020, the Valencian Community, and the authors would like to acknowledge the support of the researchers participating in the collaborative projects ‘Cloud Collaborative Manufacturing Networks’ (C2NET) (http://c2net-project.eu/), which has received funding from the EU Horizon 2020 Research and Innovation Programme with grant agreement no. 636909, and “Zero Defects Manufacturing Platform” (ZDMP) (http://www.zdmp.eu), which has received funding from the EU Horizon 2020 Research and Innovation Programme with grant agreement no. 825631.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-Code as Enabler of Digital Transformation in Manufacturing Industry

  • Sanchis, R.|||0000-0002-5495-3339
  • Fraile Gil, Francisco|||0000-0002-3275-7740
  • Poler, R.|||0000-0003-4475-6371
  • Garcia-Perales, O.
[EN] Currently, enterprises have to make quick and resilient responses to changing market requirements. In light of this, low-code development platforms provide the technology mechanisms to facilitate and automate the development of software applications to support current enterprise needs and promote digital transformation. Based on a theory-building research methodology through the literature and other information sources review, the main contribution of this paper is the current characterisation of the emerging low-code domain following the foundations of the computer-aided software engineering field. A context analysis, focused on the current status of research related to the low-code development platforms, is performed. Moreover, benchmarking among the existing low-code development platforms addressed to manufacturing industry is analysed to identify the current lacking features. As an illustrative example of the emerging low-code paradigm and respond to the identified uncovered features, the virtual factory open operating system (vf-OS) platform is described as an open multi-sided low-code framework able to manage the overall network of a collaborative manufacturing and logistics environment that enables humans, applications, and Internet of Things (IoT) devices to seamlessly communicate and interoperate in the interconnected environment, promoting resilient digital transformation., This work was supported in part by the European Commission under the Grant Agreements No. 723710 and 825631.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Job shop smart manufacturing scheduling by deep reinforcement learning for Industry 4.0

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
[ES] El paradigma de la Industria 4.0 (I4.0) gravita en gran medida sobre el potencial de las tecnologías de la información y la comunicación (TIC) para mejorar la competitividad y sostenibilidad de las industrias. El concepto de Smart Manufacturing Scheduling (SMS) surge y se inspira de ese potencial. SMS, como estrategia de transformación digital, aspira a optimizar los procesos industriales mediante la aplicación de tecnologías como el gemelo digital o digital twin (DT), el modelo de gestión zero-defect manufacturing (ZDM), y el aprendizaje por refuerzo profundo o deep reinforcement learning (DRL), con el propósito final de orientar los procesos de programación de operaciones hacia una automatización adaptativa en tiempo real y una reducción de las perturbaciones en los sistemas de producción. SMS se basa en cuatro principios de diseño del espectro I4.0: automatización, autonomía, capacidad de acción en tiempo real e interoperabilidad. A partir de estos principios clave, SMS combina las capacidades de la tecnología DT para simular, analizar y predecir; la del modelo ZDM para prevenir perturbaciones en los sistemas de planificación y control de la producción; y la del enfoque de modelado DRL para mejorar la toma de decisiones en tiempo real. Este enfoque conjunto orienta los procesos de programación de operaciones hacia una mayor eficiencia y, con ello, hacia un mayor rendimiento y resiliencia del sistema productivo. Esta investigación emprende, en primer lugar, una revisión exhaustiva del estado del arte sobre SMS. Con la revisión efectuada como referencia, la investigación plantea un modelo conceptual de SMS como estrategia de transformación digital en el contexto del proceso de programación del taller de trabajos o job shop. Finalmente, la investigación propone un modelo basado en DRL para abordar la implementación de los elementos clave del modelo conceptual: el DT del taller de trabajos y el agente programador. Los algoritmos que integran este modelo se han programado en Python y han sido validados contra varias de las más conocidas reglas heurísticas de prioridad. El desarrollo del modelo y los algoritmos supone una contribución académica y gerencial en el área de la planificación y control de la producción., [CA] El paradigma de la Indústria 4.0 (I4.0) gravita en gran mesura sobre el potencial de les tecnologies de la informació i la comunicació (TIC) per millorar la competitivitat i la sostenibilitat de les indústries. El concepte d'smart manufacturing scheduling (SMS) sorgeix i inspira a partir d'aquest potencial. SMS, com a estratègia de transformació digital, aspira a optimitzar els processos industrials mitjançant l'aplicació de tecnologies com el bessó digital o digital twin (DT), el model de gestió zero-defect manufacturing (ZDM), i l'aprenentatge per reforçament profund o deep reinforcement learning (DRL), amb el propòsit final dorientar els processos de programació doperacions cap a una automatització adaptativa en temps real i una reducció de les pertorbacions en els sistemes de producció. SMS es basa en quatre principis de disseny de l'espectre I4.0: automatització, autonomia, capacitat d¿acció en temps real i interoperabilitat. A partir d'aquests principis clau, SMS combina les capacitats de la tecnologia DT per simular, analitzar i predir; la del model ZDM per prevenir pertorbacions en els sistemes de planificació i control de la producció; i la de de l'enfocament de modelatge DRL per millorar la presa de decisions en temps real. Aquest enfocament conjunt orienta els processos de programació d'operacions cap a una eficiència més gran i, amb això, cap a un major rendiment i resiliència del sistema productiu. Aquesta investigació emprèn, en primer lloc, una exhaustiva revisió de l'estat de l'art sobre SMS. Amb la revisió efectuada com a referència, la investigació planteja un model conceptual de SMS com a estratègia de transformació digital en el context del procés de programació del taller de treballs o job shop. Finalment, la investigació proposa un model basat en DRL per abordar la implementació dels elements claus del model conceptual: el DT del taller de treballs i l'agent programador. Els algorismes que integren aquest model s'han programat a Python i han estat validats contra diverses de les més conegudes regles heurístiques de prioritat. El desenvolupament del model i els algorismes suposa una contribució a nivell acadèmic i gerencial a l'àrea de la planificació i control de la producció., [EN] The Industry 4.0 (I4.0) paradigm relies, to a large extent, on the potential of information and communication technologies (ICT) to improve the competitiveness and sustainability of industries. The smart manufacturing scheduling (SMS) concept arises and draws inspiration from this potential. As a digital transformation strategy, SMS aims to optimise industrial processes through the application of technologies, such as the digital twin (DT), the zero-defect manufacturing (ZDM) management model and deep reinforcement learning (DRL), for the ultimate purpose of guiding operations scheduling processes towards real-time adaptive automation and to reduce disturbances in production systems. SMS is based on four design principles of the I4.0 spectrum: automation, autonomy, real-time capability and interoperability. Based on these key principles, SMS combines the capabilities of the DT technology to simulate, analyse and predict; with the ZDM model, to prevent disturbances in production planning and control systems; by the DRL modelling approach, to improve real-time decision making. This joint approach orients operations scheduling processes towards greater efficiency and, with it, a better performing and more resilient production system. This research firstly undertakes a comprehensive review of the state of the art on SMS. By taking the review as a reference, the research proposes a conceptual model of SMS as a digital transformation strategy in the job shop scheduling process context. Finally, it proposes a DRL-based model to address the implementation of the key elements of the conceptual model: the job shop DT and the scheduling agent. The algorithms that integrate this model have been programmed in Python and validated against several of the most well-known heuristic priority rules. The development of the model and algorithms is an academic and managerial contribution in the production planning and control area., This thesis was developed with the support of the Research Centre on Production Management and Engineering (CIGIP) of the Universitat Politècnica de València and received funding from: the European Union H2020 programme under grant agreement No. 825631, “Zero Defect Manufacturing Platform (ZDMP)”; the European Union H2020 programme under grant agreement No. 872548, "Fostering DIHs for Embedding Interoperability in Cyber-Physical Systems of European SMEs (DIH4CPS)"; the European Union H2020 programme under grant agreement No. 958205, “Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)”; the European Union Horizon Europe programme under grant agreement No. 101057294, “AI Driven Industrial Equipment Product Life Cycle Boosting Agility, Sustainability and Resilience” (AIDEAS); the Spanish Ministry of Science, Innovation and Universities under grant agreement RTI2018-101344-B-I00, "Optimisation of zero-defects production technologies enabling supply chains 4.0 (CADS4.0)"; the Valencian Regional Government, in turn funded from grant RTI2018- 101344-B-I00 by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, "Industrial Production and Logistics optimization in Industry 4.0" (i4OPT) (Ref. PROMETEO/2021/065); and the grant PDC2022-133957- I00, “Validation of transferable results of optimisation of zero-defect enabling production technologies for supply chain 4.0” (CADS4.0-II) funded by MCIN/AEI/10.13039/501100011033 and by European Union Next GenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A decision-making tool for algorithm selection based on a fuzzy TOPSIS approach to solve replenishment, production and distribution planning problems

  • Guzmán-Ortiz, Brunnel Eduardo
  • Andres, B.|||0000-0002-7920-7711
  • Poler, R.|||0000-0003-4475-6371
[EN] A wide variety of methods and techniques with multiple characteristics are used in solving replenishment, production and distribution planning problems. Selecting a solution method (either a solver or an algorithm) when attempting to solve an optimization problem involves considerable difficulty. Identifying the best solution method among the many available ones is a complex activity that depends partly on human experts or a random trial-and-error procedure. This paper addresses the challenge of recommending a solution method for replenishment, production and distribution planning problems by proposing a decision-making tool for algorithm selection based on the fuzzy TOPSIS approach. This approach considers a collection of the different most commonly used solution methods in the literature, including distinct types of algorithms and solvers. To evaluate a solution method, 13 criteria were defined that all address several important dimensions when solving a planning problem, such as the computational difficulty, scheduling knowledge, mathematical knowledge, algorithm knowledge, mathematical modeling software knowledge and expected computational performance of the solution methods. An illustrative example is provided to demonstrate how planners apply the approach to select a solution method. A sensitivity analysis is also performed to examine the effect of decision maker biases on criteria ratings and how it may affect the final selection. The outcome of the approach provides planners with an effective and systematic decision support tool to follow the process of selecting a solution method., The research leading to these results received funding from the European Union H2020 Programme with grant agreements No. 825631 "Zero-Defect Manufacturing Platform (ZDMP)" and No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)" and from the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana with Ref. PROMETEO/2021/065 "Industrial Production and Logistics Optimization in Industry 4.0" (i4OPT). This work was supported by the Conselleria de Educación, Investigación, Cultura y Deporte¿Generalitat Valenciana for hiring predoctoral research staff with Grant (ACIF/2018/170) and the European Social Fund with the Grant Operational Programme of FSE 2014- 2020, the Valencian Community (Spain). Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Zero-defect manufacturing terminology standardization: Definition, improvement, and harmonization

  • Sousa, João
  • Nazarenko, Artem
  • Grunewald, Christian
  • Psarommatis, Foivos
  • Meyer, Olga
  • Sarraipa, João
  • Fraile Gil, Francisco|||0000-0002-3275-7740
[EN] Zero-Defect Manufacturing (ZDM) is the next evolutionary step in quality management for manufacturing that makes use of Industry 4.0 technologies to support quality in manufacturing. These technologies help reduce the cost of inspection, allowing for more inspection points throughout the manufacturing process, reducing the size of quality feedback loops, and guaranteeing that no defective product is delivered to the customer. There are several ZDM-related initiatives, but still no harmonized terminology. This article describes the methodological approach to provide a common agreement on the ZDM concept and its associated terminology taking place within an open CEN-CENELEC Workshop. The methodology has the support of ISO standards for terminology work such as ISO 704, ISO 860, and ISO 10241¿1/2. This work shows that the terminology for ZDM has a significant overlap with the terminology of quality management, metrology, dependability, statistics, non-destructive inspection, and condition monitoring. The proposed new terms and definitions can be used to further extend ISO¿s and IEC¿s already available terminologies and support present and future researchers in the field to conduct their research using a common vocabulary., The research leading to these results has received funding from the European Unions Horizon 2020 research and innovation program, mainly project ZDMP under grant agreement 825631, and Eur3ka, TALON, and RE4DY, EU H2020 projects under grant agreements 101016175, 101070181, and 101058384 accordingly.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Smart Master Production Schedule for the Supply Chain: A Conceptual Framework

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] Risks arising from the effect of disruptions and unsustainable practices constantly push the supply chain to uncompetitive positions. A smart production planning and control process must successfully address both risks by reducing them, thereby strengthening supply chain (SC) resilience and its ability to survive in the long term. On the one hand, the antidisruptive potential and the inherent sustainability implications of the zero-defect manufacturing (ZDM) management model should be highlighted. On the other hand, the digitization and virtualization of processes by Industry 4.0 (I4.0) digital technologies, namely digital twin (DT) technology, enable new simulation and optimization methods, especially in combination with machine learning (ML) procedures. This paper reviews the state of the art and proposes a ZDM strategy-based conceptual framework that models, optimizes and simulates the master production schedule (MPS) problem to maximize service levels in SCs. This conceptual framework will serve as a starting point for developing new MPS optimization models and algorithms in supply chain 4.0 (SC4.0) environments., The research leading to these results received funding from the European Union H2020 Program with grant agreements No. 825631 "Zero-Defect Manufacturing Platform (ZDMP)" and No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q)", and from Grant RTI2018-101344-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Zero Defect Manufacturing ontology: A preliminary version based on standardized terms

  • Psarommatis, Foivos
  • Ameri, Farhad
  • Fraile Gil, Francisco|||0000-0002-3275-7740
[EN] The global transition from traditional manufacturing systems to Industry 4.0 compatible systems has already begun. Therefore, the digitization of the manufacturing systems across the globe is increasing with exponential growth which implies a significant increase in the volume and variety of the generated data. Industry 4.0 technologies are mostly data driven and therefore, manufacturers need to be equipped with the appropriate tools and skill sets to extract useful knowledge and insights from the plethora of data continually collected form shop floors. Furthermore, quality assurance is a key domain in manufacturing that uses almost all the industry 4.0 technologies and has great impact on the sustainability of a manufacturing systems. The latest approach to higher quality and manufacturing sustainability is named Zero Defect Manufacturing (ZDM). ZDM interest has spiked the last three years illustrating the need for an alternative quality assurance approach from the traditional such as Six Sigma and Lean manufacturing. Therefore, the goal of this paper is to create a ZDM ontology that can semantically align multiple software systems that interact in a ZDM ecosystem. The development of the proposed ZDM ontology was performed using the principles introduced by Industrial Ontology Foundry (IOF) and with the use of Basic formal ontology (BFO) as an upper level ontology. The proposed ontology was utilized in the Pre-diction Optimization Designer tool developed, to assist developers to create new projects reusing existing re-sources, or to respond to a specific challenge. The use case validation results show that the combination of Natural Language Processing (NLP) using Sentence-BERT and ontology-based search methods rooted in the ZDM ontology is a promising strategy to implement effective search engines for applications in the ZDM domain., The presented work was partially supported by the projects Eur3ka, TALON, RE4DY and ZDMP, EU H2020 projects under grant agreements No 101016175, No 101070181, No. 101058384 and No. 825631 accordingly.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of a multidimensional conceptual model for job shop smart manufacturing scheduling from the Industry 4.0 perspective

  • Serrano-Ruiz, Julio Cesar|||0000-0002-6671-7077
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] Based on a scientific literature review in the conceptual domain defined by smart manufacturing scheduling (SMS), this article identifies the benefits and limitations of the reviewed contributions, establishes and discusses a set of criteria with which to collect and structure its main synergistic attributes, and devises a conceptual framework that models SMS around three axes: a semantic ontology context, a hierarchical agent structure, and the deep reinforcement learning (DRL) method. The main purpose of such a modelling research is to establish a conceptual and structured relationship framework to improve the efficiency of the job shop scheduling process using the approach defined by SMS. The presented model orients the job shop scheduling process towards greater flexibility, through enhanced rescheduling capability, and towards autonomous operation, mainly supported by the use of machine learning technology. To the best of our knowledge, there are no other similar conceptual models in the literature that synergistically combine the potential of the specific set of Industry 4.0 principles and technologies that model SMS. This research can provide guidance for practitioners and researchers¿ efforts to move toward the digital transformation of job shops., The research leading to these results received funding from the European Union H2020 Programme ,Belgium with grant agreements No. 825631 "Zero-Defect Manufacturing Platform (ZDMP) ", No. 958205 "Industrial Data Services for Quality Control in Smart Manufacturing (i4Q) " and 872548 "Fostering DIHs for Embedding Interoperability in Cyber-Physical Systems of European SMEs (DIH4CPS) ", from Grant RTI2018-101344-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana entitled "Industrial Production and Logistics Optimization in Industry 4.0" (i4OPT) (Ref. PROMETEO/2021/065).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhance the Injection Molding Quality Prediction with Artificial Intelligence to Reach Zero-Defect Manufacturing

  • Silva, Bruno
  • Marques, Rubén
  • Faustino, Dinis
  • Ilheu, Paulo
  • Santos, Tiago
  • Sousa, João
  • Rocha, Andre Dionisio
With the spread of the Industry 4.0 concept, implementing Artificial Intelligence approaches on the shop floor that allow companies to increase their competitiveness in the market is starting to be prioritized. Due to the complexity of the processes used in the industry, the inclusion of a real-time Quality Prediction methodology avoids a considerable number of costs to companies. This paper exposes the whole process of introducing Artificial Intelligence in plastic injection molding processes in a company in Portugal. All the implementations and methodologies used are presented, from data collection to real-time classification, such as Data Augmentation and Human-in-the-Loop labeling, among others. This approach also allows predicting and alerting with regard to process quality loss. This leads to a reduction in the production of non-compliant parts, which increases productivity and reduces costs and environmental footprint. In order to understand the applicability of this system, it was tested in different injection molding processes (traditional and stretch and blow) and with different materials and products. The results of this document show that, with the approach developed and presented, it was possible to achieve an increase in Overall Equipment Effectiveness (OEE) of up to 12%, a reduction in the process downtime of up to 9% and a significant reduction in the number of non-conforming parts produced. This improvement in key performance indicators proves the potential of this solution., The research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement n°. ZDMP 825631.