Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cryogenic multiplexing using selective area grown nanowires

  • Olšteins, Dāgs
  • Nagda, Gunjan
  • Carrad, Damon J.
  • Beznasyuk, Daria V.
  • Petersen, Christian Emanuel N.
  • Martí-Sànchez, Sara
  • Arbiol, Jordi
  • Jespersen, Thomas Sand
Bottom-up grown nanomaterials play an integral role in the development of quantum technologies but are often challenging to characterise on large scales. Here, we harness selective area growth of semiconductor nanowires to demonstrate large-scale integrated circuits and characterisation of large numbers of quantum devices. The circuit consisted of 512 quantum devices embedded within multiplexer/demultiplexer pairs, incorporating thousands of interconnected selective area growth nanowires operating under deep cryogenic conditions. Multiplexers enable a range of new strategies in quantum device research and scaling by increasing the device count while limiting the number of connections between room-temperature control electronics and the cryogenic samples. As an example of this potential we perform a statistical characterization of large arrays of identical quantum dots thus establishing the feasibility of applying cross-bar gating strategies for efficient scaling of future selective area growth quantum circuits. More broadly, the ability to systematically characterise large numbers of devices provides new levels of statistical certainty to materials/device development., This research was supported by research grants from Villum Fonden (Grant no.: 00013157) (T.S.J.) and the European Research Council under the European Union’s Horizon 2020 research and innovation program (Grant no.: 716655 and 866158) (T.S.J.) and Microsoft Quantum. ICN2 acknowledges funding from Generalitat de Catalunya (Grant no.: 2021SGR00457) (J.A.). This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGenerationEU (Grant no.: PRTR-C17.I1) (J.A.) and by Generalitat de Catalunya. The authors thank the support from “ERDF A Way of Making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant no.: CEX2021- 001214-S) and is funded by the CERCA Program/Generalitat de Catalunya. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at the University of Zaragoza. We acknowledge support from CSIC Interdisciplinary Thematic Platform (PTI+) on Quantum Technologies (PTI-QTEP+)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Statistical Reproducibility of Selective Area Grown InAs Nanowire Devices

  • Olšteins, Dāgs
  • Nagda, Gunjan
  • Carrad, Damon J.
  • Beznasyuk, Daria V.
  • Petersen, Christian Emanuel N.
  • Martí-Sànchez, Sara
  • Arbiol, Jordi
  • Jespersen, Thomas Sand
New approaches such as selective area growth (SAG), where crystal growth is lithographically controlled, allow the integration of bottom-up grown semiconductor nanomaterials in large-scale classical and quantum nanoelectronics. This calls for assessment and optimization of the reproducibility between individual components. We quantify the structural and electronic statistical reproducibility within large arrays of nominally identical selective area growth InAs nanowires. The distribution of structural parameters is acquired through comprehensive atomic force microscopy studies and transmission electron microscopy. These are compared to the statistical distributions of the cryogenic electrical properties of 256 individual SAG nanowire field effect transistors addressed using cryogenic multiplexer circuits. Correlating measurements between successive thermal cycles allows distinguishing between the contributions of surface impurity scattering and fixed structural properties to device reproducibility. The results confirm the potential of SAG nanomaterials, and the methodologies for quantifying statistical metrics are essential for further optimization of reproducibility., This research was supported by research grants from Villum Fonden (Grant no. 00013157) (T.S.J.) and the European Research Council under the European Union’s Horizon 2020 research and innovation program (Grant nos. 716655 and 866158) (T.S.J.) and Microsoft Quantum. ICN2 acknowledges funding from Generalitat de Catalunya (Grant no. 2021SGR00457) (J.A.). This study is part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGenerationEU (Grant no. PRTR-C17.I1) (J.A.) and by Generalitat de Catalunya. The authors thank support from “ERDF A way of making Europe”, by the ”European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant no. CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at University of Zaragoza. We acknowledge support from CSIC Interdisciplinary Thematic Platform (PTI+) on Quantum Technologies (PTI-QTEP+)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cryogenic multiplexing using selective area grown nanowires

  • Olsteins, Dags|||0000-0002-2946-7531
  • Nagda, Gunjan|||0000-0001-7199-2033
  • Carrad, Damon J.|||0000-0003-0372-8593
  • Beznasyuk, Daria V.|||0000-0002-8279-1875
  • Petersen, Christian E. N.|||0009-0005-5681-370X
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Sand Jespersen, Thomas|||0000-0002-7879-976X
Bottom-up grown nanomaterials play an integral role in the development of quantum technologies but are often challenging to characterise on large scales. Here, we harness selective area growth of semiconductor nanowires to demonstrate large-scale integrated circuits and characterisation of large numbers of quantum devices. The circuit consisted of 512 quantum devices embedded within multiplexer/demultiplexer pairs, incorporating thousands of interconnected selective area growth nanowires operating under deep cryogenic conditions. Multiplexers enable a range of new strategies in quantum device research and scaling by increasing the device count while limiting the number of connections between room-temperature control electronics and the cryogenic samples. As an example of this potential we perform a statistical characterization of large arrays of identical quantum dots thus establishing the feasibility of applying cross-bar gating strategies for efficient scaling of future selective area growth quantum circuits. More broadly, the ability to systematically characterise large numbers of devices provides new levels of statistical certainty to materials/device development.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Statistical Reproducibility of Selective Area Grown InAs Nanowire Devices

  • Olsteins, Dags|||0000-0002-2946-7531
  • Nagda, Gunjan|||0000-0001-7199-2033
  • Carrad, Damon J.|||0000-0003-0372-8593
  • Beznasyuk, Daria V.|||0000-0002-8279-1875
  • Petersen, Christian E. N.|||0009-0005-5681-370X
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Sand Jespersen, Thomas|||0000-0002-7879-976X
New approaches such as selective area growth (SAG), where crystal growth is lithographically controlled, allow the integration of bottom-up grown semiconductor nanomaterials in large-scale classical and quantum nanoelectronics. This calls for assessment and optimization of the reproducibility between individual components. We quantify the structural and electronic statistical reproducibility within large arrays of nominally identical selective area growth InAs nanowires. The distribution of structural parameters is acquired through comprehensive atomic force microscopy studies and transmission electron microscopy. These are compared to the statistical distributions of the cryogenic electrical properties of 256 individual SAG nanowire field effect transistors addressed using cryogenic multiplexer circuits. Correlating measurements between successive thermal cycles allows distinguishing between the contributions of surface impurity scattering and fixed structural properties to device reproducibility. The results confirm the potential of SAG nanomaterials, and the methodologies for quantifying statistical metrics are essential for further optimization of reproducibility.