Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Multiphysics simulation of slag melting in an induction furnace for sustainable silicon production

  • Bermúdez de Castro López-Varela, Alfredo
  • Crego Martínez, Óscar
  • Ferrín González, José Luis
  • García Correa, Branca
  • Gómez Pedreira, María Dolores
  • Martínez Suárez, Iván
  • Pérez Pérez, Luis Javier
  • Salgado Rodríguez, María del Pilar
This work presents a multiphysics mathematical modelling and numerical simulation of the slag melting process in an induction furnace, with a focus on the production of sustainable silicon through the EU SisAl Pilot project. The mathematical model incorporates electromagnetic, thermal and hydrodynamic phenomena in a coupled axisymmetric framework to simulate the melting of a CaO-SiO2 slag, a key component in the aluminothermic reduction process for silicon production. The model addresses the challenge of heating the poorly electrically conductive slag using a graphite crucible and it also accounts for buoyancy-driven convection in the molten slag. The numerical simulations are validated against experimental data from pilot scale trials at Elkem’s plant in Norway. In addition, sensitivity analyses are carried out considering both the progressive filling of the furnace and the inclusion of surface-to-surface radiation models.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Modelling oxy-combustion dynamics in rotary kilns for sustainable silicon production: A Case Study from the SisAl Project

  • Ferrín González, José Luis
  • Gómez Pedreira, María Dolores
  • Martínez Suárez, Iván
  • Pérez-Pérez, L. J.
  • Rey, L.
This paper deals with the mathematical modelling and numerical simulation of the rotary gas furnace used at Fundiciones Rey for the preparation of SiO2-CaO slag, a crucial step in the silicon production process of the SisAl Pilot project. The model is structured in three stages to capture the critical thermal and physical processes involved. First, a steady-state combustion model evaluates the wall heat flux from the oxy-gas flame under varying temperature conditions, taking into account the heat exchange between the refractory wall and the furnace load. A simplified transient thermal model then predicts the temperature evolution in the refractory lining between casts during a whole week of operation, with the aim of providing realistic initial conditions for the subsequent model. Finally, the melting model uses these results to simulate the melting process in the furnace, incorporating additional phenomena previously neglected. The numerical results, validated against in-plant measurements of iron and slag melting times and temperature in the external wall of the furnace, demonstrate good agreement with experimental data, supporting the reliability of the model for optimizing furnace operations and energy efficiency.