Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

SPARROW: A low-cost hardware/software co-designed SIMD microarchitecture for AI operations in space processors

  • Solé i Bonet, Marc|||0000-0002-9634-2026
  • Kosmidis, Leonidas
Recently there is an increasing interest in the use of artificial intelligence for on-board processing as indicated by the latest space missions, which cannot be satisfied by existing low-performance space-qualified processors. Although COTS AI accelerators can provide the required performance, they are not designed to meet space requirements. In this work, we co-design a low-cost SIMD micro-architecture integrated in a space qualified processor, which can significantly increase its performance. Our solution has no impact on the processor's 100 MHz frequency and consumes minimal area thanks to its innovative design compared to conventional vector micro-architectures. For the minimum configuration of our baseline space processor, our results indicate a performance boost of up to 9.3× for commonly used AI-related and image processing algorithms and 5.5× faster for a complex, space-relevant inference application with just 30% area increase., This work was supported by ESA through the GPU4S (GPU for Space) project, the Spanish Ministry of Economy and Competitiveness under grants PID2019- 107255GB and FJCI-2017-34095 (Spanish State Research Agency / http://dx.doi.org/10.13039/501100011033), the European Commission’s Horizon 2020 programme under the UP2DATE project (grant agreement 871465), the HiPEAC Network of Excellence and a first prize in Xilinx’s University Open Hardware Competition 2021 in the student category., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

The UP2DATE baseline research platforms

  • Jover Álvarez, Álvaro
  • Calderón Torres, Alejandro Josué
  • Rodríguez Ferrández, Iván
  • Kosmidis, Leonidas
  • Asifuzzaman, Kazi
  • Uven, Patrick
  • Gruttner, Kim
  • Poggi, Tomaso
  • Agirre, Irune
The UP2DATE H2020 project focuses on highperformance heterogeneous embedded platforms for critical systems. We will develop observability and controllability solutions to support online updates while ensuring safety and security for mixed-criticality tasks. In this paper, we describe the rationale behind the selection of the baseline research platforms which will be used to develop and demonstrate the project concepts, including a performance comparison to identify the most efficient one., This work is funded by the European Commission’s Horizon 2020 programme under the UP2DATE project (grant agreement 871465). It is also partially supported by the Spanish Ministry of Economy and Competitiveness under grants PID2019-107255GB and FJCI-2017-34095 and HiPEAC., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Evaluation of SYCL’s suitability for high-performance critical systems

  • Peralta Quesada, Cristina
  • Trompouki, Matina Maria
  • Kosmidis, Leonidas
Upcoming safety critical systems require high performance processing, which can be provided by multi-cores and embedded GPUs found in several Systems-on-chip (SoC) targeting these domains. So far, only low-level programming models and APIs, such as CUDA or OpenCL have been evaluated. In this paper, we evaluate the effectiveness of a higher level programming model, SYCL, for critical applications executed in such embedded platforms. In particular, we are interested in two aspects: performance and programmability. In order to conduct our study, we use the open source GPU4S Bench benchmarking suite for space and an open source pedestrian detection application representing the automotive sector, which we port into SYCL and analyse their behavior. We perform our evaluation on a high-performance platform featuring an NVIDIA GTX 1080Ti as well as a representative embedded platform, the NVIDIA Xavier AGX which is considered a good candidate for future safety critical systems in both domains and we compare our results with other programming models. Our results show that in several cases SYCL is able to obtain performance close to highly optimised code using CUDA or NVIDIA libraries, with significantly lower development effort and complexity, which confirms the suitability of SYCL for programming high-performance safety critical systems., This work was funded by the Ministerio de Ciencia e Innovacion - Agencia Estatal de Investigacion (PID2019-107255GB-C21 and IJC-2020-045931-I MCIN/AEI/10.13039/501100011033), the European Commission’s Horizon 2020 programme under the UP2DATE project (grant agreement 871465) and the HiPEAC Network of Excellence., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Worst case execution time and power estimation of multicore and GPU software: a pedestrian detection use case

  • Rodríguez Ferrández, Iván
  • Jover Álvarez, Álvaro
  • Trompouki, Matina Maria
  • Kosmidis, Leonidas
  • Cazorla Almeida, Francisco Javier
Worst Case Execution Time estimation of software running on parallel platforms is a challenging task, due to resource interference of other tasks and the complexity of the underlying CPU and GPU hardware architectures. Similarly, the increased complexity of the hardware, challenges the estimation of worst case power consumption. In this paper, we employ Measurement Based Probabilistic Timing Analysis (MBPTA), which is capable of managing complex architectures such as multicores. We enable its use by software randomisation, which we show for the first time that is also possible on GPUs. We demonstrate our method on a pedestrian detection use case on an embedded multicore and GPU platform for the automotive domain, the NVIDIA Xavier. Moreover, we extend our measurement based probabilistic method in order to predict the worst case power consumption of the software on the same platform., This work was funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (PID2019-107255GB- C21/AEI/10.13039/501100011033 and IJC-2020-045931-I), the European Commission’s Horizon 2020 programme under the UP2DATE project (grant agreement 871465), an ERC grant (No. 772773) and the HiPEAC Network of Excellence, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Enabling unit testing of already-integrated AI software systems: The case of Apollo for autonomous driving

  • Alcón Doganoc, Miguel
  • Tabani, Hamid
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
  • Cazorla Almeida, Francisco Javier
The advanced AI-based software used for autonomous driving comprises multiple highly-coupled modules that are data and control dependent. Deploying those already-integrated software frameworks makes unit testing, a fundamental step in the validation process of critical software, very challenging in safety-critical systems. To tackle this issue, in this paper, we show the steps we followed to develop standalone versions of the modules in an industry-level autonomous driving framework (Apollo) by applying several modifications to its architectural design. We show how the standalone modules have the same functional behavior as their integrated counterpart modules. We exemplify the benefits of standalone modules by performing incremental analysis of the software timing requirements of each module running on a heterogeneous System on Chip (SoC). This is a mandatory step to consolidate and integrate software modules guaranteeing timing constraints (e.g. related to freedom from interference) while maximizing SoC utilization., This work has been partially supported by the Spanish Ministry of Science, Innovation and Universities under grant PID2019-110854RB-I00/AEI/10.13039/501100011033, the UP2DATE European Union’s Horizon 2020 (H2020) research and innovation programme under grant agreement No 871465, the SuPerCom European Research Council (ERC) project under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 772773), and the HiPEAC Network of Excellence., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

GPU devices for safety-critical systems: a survey

  • Pérez Cerrolaza, Jon
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
  • Kosmidis, Leonidas
  • Calderón Torres, Alejandro Josué
  • Cazorla Almeida, Francisco Javier
  • Flores Barroso, José Luis
Graphics Processing Unit (GPU) devices and their associated software programming languages and frameworks can deliver the computing performance required to facilitate the development of next-generation high-performance safety-critical systems such as autonomous driving systems. However, the integration of complex, parallel, and computationally demanding software functions with different safety-criticality levels on GPU devices with shared hardware resources contributes to several safety certification challenges. This survey categorizes and provides an overview of research contributions that address GPU devices’ random hardware failures, systematic failures, and independence of execution., This work has been partially supported by the European Research Council with Horizon 2020 (grant agreements No. 772773 and 871465), the Spanish Ministry of Science and Innovation under grant PID2019-107255GB, the HiPEAC Network of Excellence and the Basque Government under grant KK-2019-00035. The Spanish Ministry of Economy and Competitiveness has also partially supported Leonidas Kosmidis with a Juan de la Cierva Incorporación postdoctoral fellowship (FJCI-2020- 045931-I)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

UP2DATE: Safe and secure over-the-air software updates on high-performance mixed-criticality systems

  • Agirre, Irene
  • Onaindia, Peio
  • Poggi, Tomasso
  • Yarza, Irune
  • Cazorla Almeida, Francisco Javier
  • Kosmidis, Leonidas
  • Grüttner, Kim
  • Abuteir, Mohammed
  • Loewe, Jan
  • Orbegozo, Juan M.
  • Botta, Stefania
Following the same trend of consumer electronics, safety-critical industries are starting to adopt Over-The-Air Software Updates (OTASU) on their embedded systems. The motivation behind this trend is twofold. On the one hand, OTASU offer several benefits to the product makers and users by improving or adding new functionality and services to the product without a complete redesign. On the other hand, the increasing connectivity trend makes OTASU a crucial cyber-security demand to download latest security patches. However, the application of OTASU in the safety-critical domain is not free of challenges, specially when considering the dramatic increase of software complexity and the resulting high computing performance demands. This is the mission of UP2DATE, a recently launched project funded within the European H2020 programme focused on new software update architectures for heterogeneous high-performance mixed-criticality systems. This paper gives an overview of UP2DATE and its foundations, which seeks to improve existing OTASU solutions by considering safety, security and availability from the ground up in an architecture that builds around composability and modularity., The research presented throughout this paper has received funding from the European Community’s Horizon 2020 programme under the UP2DATE project (grant agreement 871465)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On the safe deployment of matrix multiplication in massively parallel safety-related systems

  • Fernández Muñoz, Javier
  • Pérez Cerrolaza, Jon
  • Agirre, Irune
  • Calderón Torres, Alejandro Josué
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
  • Cazorla Almeida, Francisco Javier
Deep learning technology has enabled the development of increasingly complex safety-related autonomous systems using high-performance computers, such as graphics processing units (GPUs), which provide the required high computing performance for the execution of parallel computing algorithms, such as matrix–matrix multiplications (a central computing element of deep learning software libraries). However, the safety certification of parallel computing software algorithms and GPU-based safety-related systems is a challenge to be addressed. For example, achieving the required fault-tolerance and diagnostic coverage for random hardware errors. This paper contributes with a safe matrix–matrix multiplication software implementation for GPUs with random hardware error-detection capabilities (permanent, transient) that can be used with different architectural patterns for fault-tolerance, and which serves as a foundation for the implementation of safe deep learning libraries for GPUs. The proposed contribution is complementary and can be combined with other techniques, such as algorithm-based fault tolerance. In particular, (i) we provide the high-performance matrix multiplication CUTLASS library with a catalog of diagnostic mechanisms to detect random hardware errors down to the arithmetic operation level; and (ii) we measure the performance impact incurred by the adoption of these mechanisms and their achievable diagnostic coverage with a set of representative matrix dimensions. To that end, we implement these algebraic operations, targeting CUDA cores with single instructions and multiple-thread math instructions in an NVIDIA Xavier NX GPU., The research of this paper has received funding from the European Union’s Horizon 2020 research and innovation programme (grant agreement No 871465 (UP2DATE))., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

En-route: on enabling resource usage testing for autonomous driving frameworks

  • Alcon, Miguel
  • Tabani, Hamid
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
  • Kosmidis, Leonidas
  • Cazorla Almeida, Francisco Javier
Software resource usage testing, including execution time bounds and memory, is a mandatory validation step during the integration of safety-related real-time systems. However, the inherent complexity of Autonomous Driving (AD) systems challenges current practice for resource usage testing. This paper exposes the difficulties to perform resource usage testing for AD frameworks by analyzing a complex and critical module of an AD framework, and provides some guidelines and practical evidence on how resource usage testing can be effectively performed, thus enabling end users to validate their safety-related real-time AD frameworks., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under grant TIN2015-65316-P, the UP2DATE European Union’s Horizon 2020 (H2020) research and innovation programme under grant agreement No 871465, and the HiPEAC Network of Excellence. MINECO partially supported Jaume Abella under Ramon y Cajal postdoctoral fellowship (RYC-2013-14717) and Leonidas Kosmidis under Juan de la Cierva-Formación postdoctoral fellowship (FJCI-2017-34095), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Assessing and improving the suitability of model-based design for GPU-accelerated railway control systems

  • Calderón Torres, Alejandro Josué
  • Kosmidis, Leonidas
  • Nicolás Ramírez, Carlos Fernando
  • Lasala, Javier de
  • Larrañaga, Ion
Model-Based Design (MBD) is widely used for the design and simulation of electric traction control systems in the railway industry. Moreover, similar to other transportation industries, railway is moving towards the consolidation of multiple computing systems on fewer and more powerful ones, aiming for the reduction of Size, Weight and Power (SWaP). In that regard, Graphics Processing Units (GPUs) are increasingly considered by critical systems engineers, seeking to satisfy their ever increasing performance requirements. Recently, MBD tools have been enhanced with GPU code generation capabilities for machine learning acceleration, however, there is no indication whether these tools are ready for the design of time-sensitive systems. In this paper we analyse the suitability of commercial MBD toolsets by designing and deploying a model-based parallel control case study on embedded GPU platforms. While our results show promising feasibility evidence, they also reveal shortcomings which should be addressed before these toolsets become fit for developing critical systems. We propose certain improvements that have to be incorporated in these tools to achieve this goal. By implementing our proposals in the generated code, we experimentally show their effectiveness on two NVIDIA-based embedded GPUs., This work was partially supported by the European Commission’s Horizon 2020 programme under the UP2DATE project (grant agreement 871465), by the Spanish Ministry of Economy and Competitiveness under grants PID2019-107255GB and FJCI-2017-34095 and the HiPEAC Network of Excellence., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Evaluation of SYCL’s suitability for high-performance critical systems

  • Peralta Quesada, Cristina
  • Trompouki, Matina Maria
  • Kosmidis, Leonidas
Upcoming safety critical systems require high performance processing, which can be provided by multi-cores and embedded GPUs found in several Systems-on-chip (SoC) targeting these domains. So far, only low-level programming models and APIs, such as CUDA or OpenCL have been evaluated. In this paper, we evaluate the effectiveness of a higher level programming model, SYCL, for critical applications executed in such embedded platforms. In particular, we are interested in two aspects: performance and programmability. In order to conduct our study, we use the open source GPU4S Bench benchmarking suite for space and an open source pedestrian detection application representing the automotive sector, which we port into SYCL and analyse their behavior. We perform our evaluation on a high-performance platform featuring an NVIDIA GTX 1080Ti as well as a representative embedded platform, the NVIDIA Xavier AGX which is considered a good candidate for future safety critical systems in both domains and we compare our results with other programming models. Our results show that in several cases SYCL is able to obtain performance close to highly optimised code using CUDA or NVIDIA libraries, with significantly lower development effort and complexity, which confirms the suitability of SYCL for programming high-performance safety critical systems., This work was funded by the Ministerio de Ciencia e Innovacion - Agencia Estatal de Investigacion (PID2019-107255GB-C21 and IJC-2020-045931-I MCIN/AEI/10.13039/501100011033), the European Commission’s Horizon 2020 programme under the UP2DATE project (grant agreement 871465) and the HiPEAC Network of Excellence., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

En-route: on enabling resource usage testing for autonomous driving frameworks

  • Alcon, Miguel
  • Tabani, Hamid
  • Abella Ferrer, Jaume
  • Kosmidis, Leonidas
  • Cazorla Almeida, Francisco Javier
Software resource usage testing, including execution time bounds and memory, is a mandatory validation step during the integration of safety-related real-time systems. However, the inherent complexity of Autonomous Driving (AD) systems challenges current practice for resource usage testing. This paper exposes the difficulties to perform resource usage testing for AD frameworks by analyzing a complex and critical module of an AD framework, and provides some guidelines and practical evidence on how resource usage testing can be effectively performed, thus enabling end users to validate their safety-related real-time AD frameworks., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under grant TIN2015-65316-P, the UP2DATE European Union’s Horizon 2020 (H2020) research and innovation programme under grant agreement No 871465, and the HiPEAC Network of Excellence. MINECO partially supported Jaume Abella under Ramon y Cajal postdoctoral fellowship (RYC-2013-14717) and Leonidas Kosmidis under Juan de la Cierva-Formación postdoctoral fellowship (FJCI-2017-34095), Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

GPU devices for safety-critical systems: a survey

  • Pérez Cerrolaza, Jon
  • Abella Ferrer, Jaume
  • Kosmidis, Leonidas
  • Calderón Torres, Alejandro Josué
  • Cazorla Almeida, Francisco Javier
  • Flores Barroso, José Luis
Graphics Processing Unit (GPU) devices and their associated software programming languages and frameworks can deliver the computing performance required to facilitate the development of next-generation high-performance safety-critical systems such as autonomous driving systems. However, the integration of complex, parallel, and computationally demanding software functions with different safety-criticality levels on GPU devices with shared hardware resources contributes to several safety certification challenges. This survey categorizes and provides an overview of research contributions that address GPU devices’ random hardware failures, systematic failures, and independence of execution., This work has been partially supported by the European Research Council with Horizon 2020 (grant agreements No. 772773 and 871465), the Spanish Ministry of Science and Innovation under grant PID2019-107255GB, the HiPEAC Network of Excellence and the Basque Government under grant KK-2019-00035. The Spanish Ministry of Economy and Competitiveness has also partially supported Leonidas Kosmidis with a Juan de la Cierva Incorporación postdoctoral fellowship (FJCI-2020- 045931-I)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

SPARROW: A low-cost hardware/software co-designed SIMD microarchitecture for AI operations in space processors

  • Solé i Bonet, Marc
  • Kosmidis, Leonidas
Recently there is an increasing interest in the use of artificial intelligence for on-board processing as indicated by the latest space missions, which cannot be satisfied by existing low-performance space-qualified processors. Although COTS AI accelerators can provide the required performance, they are not designed to meet space requirements. In this work, we co-design a low-cost SIMD micro-architecture integrated in a space qualified processor, which can significantly increase its performance. Our solution has no impact on the processor's 100 MHz frequency and consumes minimal area thanks to its innovative design compared to conventional vector micro-architectures. For the minimum configuration of our baseline space processor, our results indicate a performance boost of up to 9.3× for commonly used AI-related and image processing algorithms and 5.5× faster for a complex, space-relevant inference application with just 30% area increase., This work was supported by ESA through the GPU4S (GPU for Space) project, the Spanish Ministry of Economy and Competitiveness under grants PID2019- 107255GB and FJCI-2017-34095 (Spanish State Research Agency / http://dx.doi.org/10.13039/501100011033), the European Commission’s Horizon 2020 programme under the UP2DATE project (grant agreement 871465), the HiPEAC Network of Excellence and a first prize in Xilinx’s University Open Hardware Competition 2021 in the student category., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The UP2DATE baseline research platforms

  • Jover Álvarez, Álvaro
  • Calderón Torres, Alejandro Josué
  • Rodríguez Ferrández, Iván
  • Kosmidis, Leonidas
  • Asifuzzaman, Kazi
  • Uven, Patrick
  • Gruttner, Kim
  • Poggi, Tomaso
  • Agirre, Irune
The UP2DATE H2020 project focuses on highperformance heterogeneous embedded platforms for critical systems. We will develop observability and controllability solutions to support online updates while ensuring safety and security for mixed-criticality tasks. In this paper, we describe the rationale behind the selection of the baseline research platforms which will be used to develop and demonstrate the project concepts, including a performance comparison to identify the most efficient one., This work is funded by the European Commission’s Horizon 2020 programme under the UP2DATE project (grant agreement 871465). It is also partially supported by the Spanish Ministry of Economy and Competitiveness under grants PID2019-107255GB and FJCI-2017-34095 and HiPEAC., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Assessing and improving the suitability of model-based design for GPU-accelerated railway control systems

  • Calderón Torres, Alejandro Josué
  • Kosmidis, Leonidas
  • Nicolás Ramírez, Carlos Fernando
  • Lasala, Javier de
  • Larrañaga, Ion
Model-Based Design (MBD) is widely used for the design and simulation of electric traction control systems in the railway industry. Moreover, similar to other transportation industries, railway is moving towards the consolidation of multiple computing systems on fewer and more powerful ones, aiming for the reduction of Size, Weight and Power (SWaP). In that regard, Graphics Processing Units (GPUs) are increasingly considered by critical systems engineers, seeking to satisfy their ever increasing performance requirements. Recently, MBD tools have been enhanced with GPU code generation capabilities for machine learning acceleration, however, there is no indication whether these tools are ready for the design of time-sensitive systems. In this paper we analyse the suitability of commercial MBD toolsets by designing and deploying a model-based parallel control case study on embedded GPU platforms. While our results show promising feasibility evidence, they also reveal shortcomings which should be addressed before these toolsets become fit for developing critical systems. We propose certain improvements that have to be incorporated in these tools to achieve this goal. By implementing our proposals in the generated code, we experimentally show their effectiveness on two NVIDIA-based embedded GPUs., This work was partially supported by the European Commission’s Horizon 2020 programme under the UP2DATE project (grant agreement 871465), by the Spanish Ministry of Economy and Competitiveness under grants PID2019-107255GB and FJCI-2017-34095 and the HiPEAC Network of Excellence., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On the safe deployment of matrix multiplication in massively parallel safety-related systems

  • Fernández Muñoz, Javier
  • Pérez Cerrolaza, Jon
  • Agirre, Irune
  • Calderón Torres, Alejandro Josué
  • Abella Ferrer, Jaume
  • Cazorla Almeida, Francisco Javier
Deep learning technology has enabled the development of increasingly complex safety-related autonomous systems using high-performance computers, such as graphics processing units (GPUs), which provide the required high computing performance for the execution of parallel computing algorithms, such as matrix–matrix multiplications (a central computing element of deep learning software libraries). However, the safety certification of parallel computing software algorithms and GPU-based safety-related systems is a challenge to be addressed. For example, achieving the required fault-tolerance and diagnostic coverage for random hardware errors. This paper contributes with a safe matrix–matrix multiplication software implementation for GPUs with random hardware error-detection capabilities (permanent, transient) that can be used with different architectural patterns for fault-tolerance, and which serves as a foundation for the implementation of safe deep learning libraries for GPUs. The proposed contribution is complementary and can be combined with other techniques, such as algorithm-based fault tolerance. In particular, (i) we provide the high-performance matrix multiplication CUTLASS library with a catalog of diagnostic mechanisms to detect random hardware errors down to the arithmetic operation level; and (ii) we measure the performance impact incurred by the adoption of these mechanisms and their achievable diagnostic coverage with a set of representative matrix dimensions. To that end, we implement these algebraic operations, targeting CUDA cores with single instructions and multiple-thread math instructions in an NVIDIA Xavier NX GPU., The research of this paper has received funding from the European Union’s Horizon 2020 research and innovation programme (grant agreement No 871465 (UP2DATE))., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

UP2DATE: Safe and secure over-the-air software updates on high-performance mixed-criticality systems

  • Agirre, Irene
  • Onaindia, Peio
  • Poggi, Tomasso
  • Yarza, Irune
  • Cazorla Almeida, Francisco Javier
  • Kosmidis, Leonidas
  • Grüttner, Kim
  • Abuteir, Mohammed
  • Loewe, Jan
  • Orbegozo, Juan M.
  • Botta, Stefania
Following the same trend of consumer electronics, safety-critical industries are starting to adopt Over-The-Air Software Updates (OTASU) on their embedded systems. The motivation behind this trend is twofold. On the one hand, OTASU offer several benefits to the product makers and users by improving or adding new functionality and services to the product without a complete redesign. On the other hand, the increasing connectivity trend makes OTASU a crucial cyber-security demand to download latest security patches. However, the application of OTASU in the safety-critical domain is not free of challenges, specially when considering the dramatic increase of software complexity and the resulting high computing performance demands. This is the mission of UP2DATE, a recently launched project funded within the European H2020 programme focused on new software update architectures for heterogeneous high-performance mixed-criticality systems. This paper gives an overview of UP2DATE and its foundations, which seeks to improve existing OTASU solutions by considering safety, security and availability from the ground up in an architecture that builds around composability and modularity., The research presented throughout this paper has received funding from the European Community’s Horizon 2020 programme under the UP2DATE project (grant agreement 871465)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Enabling unit testing of already-integrated AI software systems: The case of Apollo for autonomous driving

  • Alcón Doganoc, Miguel
  • Tabani, Hamid
  • Abella Ferrer, Jaume
  • Cazorla Almeida, Francisco Javier
The advanced AI-based software used for autonomous driving comprises multiple highly-coupled modules that are data and control dependent. Deploying those already-integrated software frameworks makes unit testing, a fundamental step in the validation process of critical software, very challenging in safety-critical systems. To tackle this issue, in this paper, we show the steps we followed to develop standalone versions of the modules in an industry-level autonomous driving framework (Apollo) by applying several modifications to its architectural design. We show how the standalone modules have the same functional behavior as their integrated counterpart modules. We exemplify the benefits of standalone modules by performing incremental analysis of the software timing requirements of each module running on a heterogeneous System on Chip (SoC). This is a mandatory step to consolidate and integrate software modules guaranteeing timing constraints (e.g. related to freedom from interference) while maximizing SoC utilization., This work has been partially supported by the Spanish Ministry of Science, Innovation and Universities under grant PID2019-110854RB-I00/AEI/10.13039/501100011033, the UP2DATE European Union’s Horizon 2020 (H2020) research and innovation programme under grant agreement No 871465, the SuPerCom European Research Council (ERC) project under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 772773), and the HiPEAC Network of Excellence., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Worst case execution time and power estimation of multicore and GPU software: a pedestrian detection use case

  • Rodríguez Ferrández, Iván
  • Jover Álvarez, Álvaro
  • Trompouki, Matina Maria
  • Kosmidis, Leonidas
  • Cazorla Almeida, Francisco Javier
Worst Case Execution Time estimation of software running on parallel platforms is a challenging task, due to resource interference of other tasks and the complexity of the underlying CPU and GPU hardware architectures. Similarly, the increased complexity of the hardware, challenges the estimation of worst case power consumption. In this paper, we employ Measurement Based Probabilistic Timing Analysis (MBPTA), which is capable of managing complex architectures such as multicores. We enable its use by software randomisation, which we show for the first time that is also possible on GPUs. We demonstrate our method on a pedestrian detection use case on an embedded multicore and GPU platform for the automotive domain, the NVIDIA Xavier. Moreover, we extend our measurement based probabilistic method in order to predict the worst case power consumption of the software on the same platform., This work was funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (PID2019-107255GB- C21/AEI/10.13039/501100011033 and IJC-2020-045931-I), the European Commission’s Horizon 2020 programme under the UP2DATE project (grant agreement 871465), an ERC grant (No. 772773) and the HiPEAC Network of Excellence, Peer Reviewed, Postprint (author's final draft)