Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Twisted Edwards elliptic curves for zero-knowledge circuits

  • Bellés-Muñoz, Marta
  • Whitehat, Barry
  • Baylina, Jordi
  • Daza, Vanesa
  • Muñoz-Tapia, José L.
Circuit-based zero-knowledge proofs have arose as a solution to the implementation of privacy in blockchain applications, and to current scalability problems that blockchains suffer from. The most efficient circuit-based zero-knowledge proofs use a pairing-friendly elliptic curve to generate and validate proofs. In particular, the circuits are built connecting wires that carry elements from a large prime field, whose order is determined by the number of elements of the pairing-friendly elliptic curve. In this context, it is important to generate an inner curve using this field, because it allows to create circuits that can verify public-key cryptography primitives, such as digital signatures and encryption schemes. To this purpose, in this article, we present a deterministic algorithm for generating twisted Edwards elliptic curves defined over a given prime field. We also provide an algorithm for checking the resilience of this type of curve against most common security attacks. Additionally, we use our algorithms to generate Baby Jubjub, a curve that can be used to implement elliptic-curve cryptography in circuits that can be validated in the Ethereum blockchain., This research has been partially funded by the projects Project RTI2018-102112-B-100 (AEI/FEDER, UE), i3Market (H2020-ICT-2019-2 grant number 871754) and TCO-RISEBLOCK (PID2019- 110224RB-I00).
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

New privacy practices for blockchain software

  • Bellés-Muñoz, Marta
  • Baylina, Jordi
  • Daza, Vanesa
  • Muñoz-Tapia, José L.
In this article, we present the software tools we have implemented to bring complex privacy technologies closer to developers and to facilitate the implementation of privacyenabled blockchain applications., This research is supported by the Ethereum Foundation Ecosystem Support, privacy and security in blockchain (RISEBLOCK, Id: PID2019-110224RB-I00), intelligent, interoperable, integrative and deployable open source MARKETplace with trusted and secure software tools for incentivizing the industry data economy (i3-MARKET, European Commission, H2020, Id: 871754), a software architecture for rate-control over integrated satellite-terrestrial networks (ARPASAT, Id: TEC2015-70197-R), Information Security Group (ISG, Id: 2014-SGR-1504), Photoreal REaltime Sentient ENTity (PRESENT, European Commission, H2020, Id: 856879), and Técnicas avanzadas de cadenas de bloques para la internet de las cosas (Id: RTI2018-102112-B-I00).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

New privacy practices for blockchain software

  • Bellés Muñoz, Marta
  • Baylina Melé, Jordi
  • Daza Fernández, Vanesa
  • Muñoz Tapia, José Luis|||0000-0001-6442-437X
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The benefits of blockchain technologies for industrial applications are unquestionable. However, it is a considerable challenge to use a transparent system like blockchain and at the same time provide privacy to sensitive data. Privacy technologies permit conducting private transactions about sensitive data over transparent networks, but their inherent complexity has been overwhelming for many developers. Closing the gap between developers and privacy-preserving technologies would help to the full adoption of the privacy by design framework for blockchain software. To this end, in this paper we present the software tools we have implemented to bring complex privacy technologies closer to developers and facilitate the job of implementing privacy-enabled blockchain applications., This research is supported by the Ethereum Foundation Ecosystem Support [9], TCO-RISEBLOCK (PID2019-110224RB-I00), H2020-i3-MARKET, ARPASAT (TEC2015-70197-R), 2014-SGR-1504, RTI2018-102112-B-I00 (AEI/FEDER,UE) and H2020 PRESENT (856879)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

NoRDEx: A decentralized optimistic non-repudiation protocol for data exchanges

  • Román García, Fernando|||0000-0002-1330-1422
  • Hernández Serrano, Juan|||0000-0001-5225-7404
  • Esparza Martín, Óscar|||0000-0002-2593-0162
This article introduces the Non-Repudiable Data Exchange (NoRDEx) protocol, designed to ensure non-repudiation in data exchanges. Unlike traditional non-repudiation and fair exchange protocols, NoRDEx can be considered decentralized as it eliminates the need for a centralized Trusted Third Party (TTP) by using a Distributed Ledger Technology (DLT) to store cryptographic proofs without revealing the exchanged message. NoRDEx is an optimistic non-repudiation protocol, as it only uses the DLT in case of a dispute. The protocol has been implemented and tested in real-world environments, with performance assessments covering cost, overhead, and execution time. A formal security analysis using the Syverson Van Oorschot (SVO) logical model demonstrates NoRDEx’s ability to resolve disputes securely., This research has been funded by the European Union i3-MARKET project (H2020-ICT-2019-2 grant number 871754), and by the General-itat de Catalunya under grant 2021-SGR-00594. It is worth noting that this initiative is carried out within the framework of the funds from the Recovery, Transformation, and Resilience Plan, financed by the European Union (Next Generation), under the auspices of the INCIBE Cybersecurity Chair named CARISMATICA (C066.23_UPC)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Invoice factoring registration based on a public blockchain

  • Mohammadzadeh, Nasibeh|||0000-0001-5950-0964
  • Nogoorani, Sadegh Dorri
  • Muñoz Tapia, José Luis|||0000-0001-6442-437X
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Invoice factoring is a very useful tool for developing businesses that face liquidity problems. The main property that a factoring system needs to fulfill is to prevent an invoice from being factored twice. In order to prevent double factoring, many factoring ecosystems use one or several centralized entities to register factoring agreements. However, this puts a lot of power in the hands of these centralized entities and makes it difficult for users to dispute situations in which factoring data is unavailable, wrongly recorded or manipulated by negligence or on purpose. In this article, we propose an architecture for invoice factoring registration based on a public blockchain. To solve the aforementioned drawbacks, we replace the trusted third parties for factoring registration with a smart contract. Using a smart contract, we record digital evidence of the terms and conditions of factoring agreements in explicit detail, allowing auditability and dispute resolution. Relevant information is highly available on the blockchain while its privacy is protected. The registration is optimal, since it needs only one blockchain transaction and one key-value storage per invoice factoring., This work was supported in part by the TCO-RISEBLOCK under Grant PID2019-110224RB-I00, in part by the H2020-i3-MARKET, and in part by the ARPASAT under Grant TEC2015-70197-R and Grant 2014-SGR-1504, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Twisted edwards elliptic curves for zero-knowledge circuits

  • Ballés Muñoz, Marta
  • Whitehat, Barry
  • Baylina Melé, Jordi
  • Daza Fernández, Vanesa
  • Muñoz Tapia, José Luis|||0000-0001-6442-437X
Circuit-based zero-knowledge proofs have arose as a solution to the implementation of privacy in blockchain applications, and to current scalability problems that blockchains suffer from. The most efficient circuit-based zero-knowledge proofs use a pairing-friendly elliptic curve to generate and validate proofs. In particular, the circuits are built connecting wires that carry elements from a large prime field, whose order is determined by the number of elements of the pairing-friendly elliptic curve. In this context, it is important to generate an inner curve using this field, because it allows to create circuits that can verify public-key cryptography primitives, such as digital signatures and encryption schemes. To this purpose, in this article, we present a deterministic algorithm for generating twisted Edwards elliptic curves defined over a given prime field. We also provide an algorithm for checking the resilience of this type of curve against most common security attacks. Additionally, we use our algorithms to generate Baby Jubjub, a curve that can be used to implement elliptic-curve cryptography in circuits that can be validated in the Ethereum blockchain., This research has been partially funded by the projects Project RTI2018-102112-B-100 (AEI/FEDER, UE), i3Market (H2020-ICT-2019-2 grant number 871754) and TCO-RISEBLOCK (PID2019- 110224RB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An architecture for easy onboarding and key life-cycle management in blockchain applications

  • Genés Durán, Rafael|||0000-0003-2456-2625
  • Yarlequé Ruesta, Diana
  • Bellés Muñoz, Marta
  • Jimenez Viguer, Antonio
  • Muñoz Tapia, José Luis|||0000-0001-6442-437X
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., New manufacturing paradigms require a large number of business interactions between multiple cyber-physical systems with different owners. In this context, public distributed ledgers are disruptive because they make it possible to securely and publicly record proofs of agreements between parties that do not necessarily trust each other. Many industry leaders have already achieved significant business benefits using this technology, including greater transparency, improved traceability, enhanced security, increased transaction speed and costs reduction. While the benefits of blockchain technologies for industrial applications are unquestionable, these technologies have an inherent complexity that might be overwhelming for many users. To decrease entry barriers for industry users to distributed ledger technologies, it is necessary to have an easy user onboarding process and a simple key life-cycle management. In this paper, we propose an architecture that facilitates these processes and simplifies how users utilize decentralized applications without sacrificing on the expected security. To achieve this goal, our architecture uses a middleware that allows us to decouple the digital signatures required for paying blockchain fees from the ones required for authorization. This approach has the advantage that users are not forced to create wallets, buy cryptocurrency, or protect their private keys. For these reasons, our solution is a promising way of enabling a reasonable transition to the integration of distributed ledger technologies in industrial business processes.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

DA2Wa: a secure pairing protocol between a DApp and a wallet for the blockchain scenario, DA2Wa: un protocol de vinculació segur entre una DApp i un wallet per al cas d'ús de blockchain

  • Román García, Fernando|||0000-0002-1330-1422
  • Hernández Serrano, Juan|||0000-0001-5225-7404
  • Esparza Martín, Óscar|||0000-0002-2593-0162
© 2024 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Wallet applications play a crucial role in securely storing users’ private keys needed to interact with the blockchain, while decentralized applications (DApps) take profit of blockchain technologies to create transparent, tamper-proof environments without the need for trust relationships. As DApps need private keys to interact with the blockchain, the secure interconnection of these applications is vital yet still challenging. This article introduces DA2Wa, a protocol designed to establish a secure pairing between a cryptocurrency wallet and a DApp, both of which run as isolated applications on the same machine. The protocol utilizes a six-character PIN exchange mechanism, delivering a security level equivalent to that of Bluetooth. To demonstrate the security of DA2Wa, we employ Tamarin Prover, a tool for symbolically modelling and analysing security protocols., We would like to thank the anonymous referees’ valuable comments and suggestions on the improvement of this paper. This research has been funded by i3-MARKET (H2020-ICT-2019-2 grant number 871754), by the Spanish Ministry of Science and Education under the project TCO-RISEBLOCK (PID2019-110224RB-I00), and finally by the Generalitat de Catalunya under grant 2021-SGR-00594. It is worth noting that this initiative is carried out within the framework of the funds from the Recovery, Transformation, and Resilience Plan, financed by the European Union (Next Generation), under the auspices of the INCIBE Cybersecurity Chair named CARISMATICA., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A protocol for data exchange with free samples using smart contracts

  • Genés Durán, Rafael|||0000-0003-2456-2625
  • Hernández Serrano, Juan|||0000-0001-5225-7404
  • Esparza Martín, Óscar|||0000-0002-2593-0162
  • Soriano Ibáñez, Miguel|||0000-0003-0457-8531
  • Muñoz Tapia, José Luis|||0000-0001-6442-437X
  • Bellés Muñoz, Marta
Distrust between data providers and data consumers is one of the main obstacles hampering digitaldata commerce to take off. Data providers want to get paid for what they offer, while data consumers want to know exactly what are they paying for before actually paying for it. In this paper, we summarize a protocol that overcomes this obstacle by building trust based on two main ideas. First, a probabilistic verification protocol, where some random samples of the real dataset are shown to buyers in order to allow them to make an assessment before committing any payment; and second a guaranteed, protected payment process, enforced with smart contracts on a public blockchain, that guarantees the payment of the data if and only if the data provided meets the agreed terms, and that refunds honest players otherwise., This research has been funded by i3Market (H2020- ICT-2019-2 grant number 871754). This work is also supported by the TCO-RISEBLOCK (PID2019-110224RBI00), ARPASAT (TEC2015-70197-R), Project RTI2018- 102112-B-I00 (AEI/FEDER,UE) and by the Generalitat de Catalunya grant 2014-SGR-1504
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Decentralized factoring for self-sovereign identities

  • Mohammadzadeh, Nasibeh|||0000-0001-5950-0964
  • Nogoorani, Sadegh Dorri
  • Muñoz Tapia, José Luis|||0000-0001-6442-437X
Invoice factoring is a handy tool for developing businesses that face liq- uidity problems. The main property that a factoring system needs to fulfill is to prevent an invoice from being factored twice. Distributed ledger tech- nology is suitable for implementing the platform to register invoice factor- ing agreements and prevent double-factoring. Several works have been proposed to use this technology for invoice factoring. However, current proposals lack in one or several aspects such as decentralization and secu- rity against corruption, protecting business and personally identifiable in- formation (PII), providing non-repudiation for handling disputes, Know- Your-Customer (KYC) compliance, easy user on-boarding, and being cost- efficient. In this article, a factoring registration protocol is proposed for invoice factoring registration based on a public distributed ledger which adheres to the before-mentioned requirements. We include a relayer in our architecture to address the entry barrier that the users have due to the need of managing cryptocurrencies for interacting with the public ledger. Moreover, we leverage the concept of Verifiable Credentials (VCs) for KYC compliance, and allow parties to implement their self-sovereign identities by using decentralized identifiers (DIDs). DIDs enable us to relay on the DIDComm protocol for asynchronous and secure off-chain communica- tions. We analyze our protocol from several security aspects, compare it to the related work, and study a possible business use case. Our evalu- ations demonstrate that our proposal is secure and efficient, and covers requirements not addressed by existing related work., This research has been funded by i3Market (H2020-ICT-2019-2 grant number 871754). This work is also supported by the TCO-RISEBLOCK (PID2019-110224RB-I00), ARPASAT (TEC2015- 70197-R), and by the Generalitat de Catalunya grant 2014-SGR-1504., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

New privacy practices for blockchain software

  • Bellés Muñoz, Marta
  • Baylina Melé, Jordi
  • Daza Fernández, Vanesa
  • Muñoz Tapia, José Luis
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The benefits of blockchain technologies for industrial applications are unquestionable. However, it is a considerable challenge to use a transparent system like blockchain and at the same time provide privacy to sensitive data. Privacy technologies permit conducting private transactions about sensitive data over transparent networks, but their inherent complexity has been overwhelming for many developers. Closing the gap between developers and privacy-preserving technologies would help to the full adoption of the privacy by design framework for blockchain software. To this end, in this paper we present the software tools we have implemented to bring complex privacy technologies closer to developers and facilitate the job of implementing privacy-enabled blockchain applications., This research is supported by the Ethereum Foundation Ecosystem Support [9], TCO-RISEBLOCK (PID2019-110224RB-I00), H2020-i3-MARKET, ARPASAT (TEC2015-70197-R), 2014-SGR-1504, RTI2018-102112-B-I00 (AEI/FEDER,UE) and H2020 PRESENT (856879)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An architecture for easy onboarding and key life-cycle management in blockchain applications

  • Genés Durán, Rafael
  • Yarlequé Ruesta, Diana
  • Bellés Muñoz, Marta
  • Jimenez Viguer, Antonio
  • Muñoz Tapia, José Luis
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., New manufacturing paradigms require a large number of business interactions between multiple cyber-physical systems with different owners. In this context, public distributed ledgers are disruptive because they make it possible to securely and publicly record proofs of agreements between parties that do not necessarily trust each other. Many industry leaders have already achieved significant business benefits using this technology, including greater transparency, improved traceability, enhanced security, increased transaction speed and costs reduction. While the benefits of blockchain technologies for industrial applications are unquestionable, these technologies have an inherent complexity that might be overwhelming for many users. To decrease entry barriers for industry users to distributed ledger technologies, it is necessary to have an easy user onboarding process and a simple key life-cycle management. In this paper, we propose an architecture that facilitates these processes and simplifies how users utilize decentralized applications without sacrificing on the expected security. To achieve this goal, our architecture uses a middleware that allows us to decouple the digital signatures required for paying blockchain fees from the ones required for authorization. This approach has the advantage that users are not forced to create wallets, buy cryptocurrency, or protect their private keys. For these reasons, our solution is a promising way of enabling a reasonable transition to the integration of distributed ledger technologies in industrial business processes., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

New privacy practices for blockchain software

  • Bellés-Muñoz, Marta
  • Baylina, Jordi
  • Daza, Vanesa
  • Muñoz-Tapia, José L.
In this article, we present the software tools we have implemented to bring complex privacy technologies closer to developers and to facilitate the implementation of privacyenabled blockchain applications., This research is supported by the Ethereum Foundation Ecosystem Support, privacy and security in blockchain (RISEBLOCK, Id: PID2019-110224RB-I00), intelligent, interoperable, integrative and deployable open source MARKETplace with trusted and secure software tools for incentivizing the industry data economy (i3-MARKET, European Commission, H2020, Id: 871754), a software architecture for rate-control over integrated satellite-terrestrial networks (ARPASAT, Id: TEC2015-70197-R), Information Security Group (ISG, Id: 2014-SGR-1504), Photoreal REaltime Sentient ENTity (PRESENT, European Commission, H2020, Id: 856879), and Técnicas avanzadas de cadenas de bloques para la internet de las cosas (Id: RTI2018-102112-B-I00).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A protocol for data exchange with free samples using smart contracts

  • Genés Durán, Rafael
  • Hernández Serrano, Juan
  • Esparza Martín, Óscar
  • Soriano Ibáñez, Miguel
  • Muñoz Tapia, José Luis
  • Bellés Muñoz, Marta
Distrust between data providers and data consumers is one of the main obstacles hampering digitaldata commerce to take off. Data providers want to get paid for what they offer, while data consumers want to know exactly what are they paying for before actually paying for it. In this paper, we summarize a protocol that overcomes this obstacle by building trust based on two main ideas. First, a probabilistic verification protocol, where some random samples of the real dataset are shown to buyers in order to allow them to make an assessment before committing any payment; and second a guaranteed, protected payment process, enforced with smart contracts on a public blockchain, that guarantees the payment of the data if and only if the data provided meets the agreed terms, and that refunds honest players otherwise., This research has been funded by i3Market (H2020- ICT-2019-2 grant number 871754). This work is also supported by the TCO-RISEBLOCK (PID2019-110224RBI00), ARPASAT (TEC2015-70197-R), Project RTI2018- 102112-B-I00 (AEI/FEDER,UE) and by the Generalitat de Catalunya grant 2014-SGR-1504, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Invoice factoring registration based on a public blockchain

  • Mohammadzadeh, Nasibeh
  • Nogoorani, Sadegh Dorri
  • Muñoz Tapia, José Luis
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Invoice factoring is a very useful tool for developing businesses that face liquidity problems. The main property that a factoring system needs to fulfill is to prevent an invoice from being factored twice. In order to prevent double factoring, many factoring ecosystems use one or several centralized entities to register factoring agreements. However, this puts a lot of power in the hands of these centralized entities and makes it difficult for users to dispute situations in which factoring data is unavailable, wrongly recorded or manipulated by negligence or on purpose. In this article, we propose an architecture for invoice factoring registration based on a public blockchain. To solve the aforementioned drawbacks, we replace the trusted third parties for factoring registration with a smart contract. Using a smart contract, we record digital evidence of the terms and conditions of factoring agreements in explicit detail, allowing auditability and dispute resolution. Relevant information is highly available on the blockchain while its privacy is protected. The registration is optimal, since it needs only one blockchain transaction and one key-value storage per invoice factoring., This work was supported in part by the TCO-RISEBLOCK under Grant PID2019-110224RB-I00, in part by the H2020-i3-MARKET, and in part by the ARPASAT under Grant TEC2015-70197-R and Grant 2014-SGR-1504, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Twisted Edwards elliptic curves for zero-knowledge circuits

  • Bellés-Muñoz, Marta
  • Whitehat, Barry
  • Baylina, Jordi
  • Daza, Vanesa
  • Muñoz-Tapia, José L.
Circuit-based zero-knowledge proofs have arose as a solution to the implementation of privacy in blockchain applications, and to current scalability problems that blockchains suffer from. The most efficient circuit-based zero-knowledge proofs use a pairing-friendly elliptic curve to generate and validate proofs. In particular, the circuits are built connecting wires that carry elements from a large prime field, whose order is determined by the number of elements of the pairing-friendly elliptic curve. In this context, it is important to generate an inner curve using this field, because it allows to create circuits that can verify public-key cryptography primitives, such as digital signatures and encryption schemes. To this purpose, in this article, we present a deterministic algorithm for generating twisted Edwards elliptic curves defined over a given prime field. We also provide an algorithm for checking the resilience of this type of curve against most common security attacks. Additionally, we use our algorithms to generate Baby Jubjub, a curve that can be used to implement elliptic-curve cryptography in circuits that can be validated in the Ethereum blockchain., This research has been partially funded by the projects Project RTI2018-102112-B-100 (AEI/FEDER, UE), i3Market (H2020-ICT-2019-2 grant number 871754) and TCO-RISEBLOCK (PID2019- 110224RB-I00).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Twisted edwards elliptic curves for zero-knowledge circuits

  • Ballés Muñoz, Marta
  • Whitehat, Barry
  • Baylina Melé, Jordi
  • Daza Fernández, Vanesa
  • Muñoz Tapia, José Luis
Circuit-based zero-knowledge proofs have arose as a solution to the implementation of privacy in blockchain applications, and to current scalability problems that blockchains suffer from. The most efficient circuit-based zero-knowledge proofs use a pairing-friendly elliptic curve to generate and validate proofs. In particular, the circuits are built connecting wires that carry elements from a large prime field, whose order is determined by the number of elements of the pairing-friendly elliptic curve. In this context, it is important to generate an inner curve using this field, because it allows to create circuits that can verify public-key cryptography primitives, such as digital signatures and encryption schemes. To this purpose, in this article, we present a deterministic algorithm for generating twisted Edwards elliptic curves defined over a given prime field. We also provide an algorithm for checking the resilience of this type of curve against most common security attacks. Additionally, we use our algorithms to generate Baby Jubjub, a curve that can be used to implement elliptic-curve cryptography in circuits that can be validated in the Ethereum blockchain., This research has been partially funded by the projects Project RTI2018-102112-B-100 (AEI/FEDER, UE), i3Market (H2020-ICT-2019-2 grant number 871754) and TCO-RISEBLOCK (PID2019- 110224RB-I00)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

NoRDEx: A decentralized optimistic non-repudiation protocol for data exchanges

  • Román García, Fernando
  • Hernández Serrano, Juan
  • Esparza Martín, Óscar
This article introduces the Non-Repudiable Data Exchange (NoRDEx) protocol, designed to ensure non-repudiation in data exchanges. Unlike traditional non-repudiation and fair exchange protocols, NoRDEx can be considered decentralized as it eliminates the need for a centralized Trusted Third Party (TTP) by using a Distributed Ledger Technology (DLT) to store cryptographic proofs without revealing the exchanged message. NoRDEx is an optimistic non-repudiation protocol, as it only uses the DLT in case of a dispute. The protocol has been implemented and tested in real-world environments, with performance assessments covering cost, overhead, and execution time. A formal security analysis using the Syverson Van Oorschot (SVO) logical model demonstrates NoRDEx’s ability to resolve disputes securely., This research has been funded by the European Union i3-MARKET project (H2020-ICT-2019-2 grant number 871754), and by the General-itat de Catalunya under grant 2021-SGR-00594. It is worth noting that this initiative is carried out within the framework of the funds from the Recovery, Transformation, and Resilience Plan, financed by the European Union (Next Generation), under the auspices of the INCIBE Cybersecurity Chair named CARISMATICA (C066.23_UPC)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Decentralized factoring for self-sovereign identities

  • Mohammadzadeh, Nasibeh
  • Nogoorani, Sadegh Dorri
  • Muñoz Tapia, José Luis
Invoice factoring is a handy tool for developing businesses that face liq- uidity problems. The main property that a factoring system needs to fulfill is to prevent an invoice from being factored twice. Distributed ledger tech- nology is suitable for implementing the platform to register invoice factor- ing agreements and prevent double-factoring. Several works have been proposed to use this technology for invoice factoring. However, current proposals lack in one or several aspects such as decentralization and secu- rity against corruption, protecting business and personally identifiable in- formation (PII), providing non-repudiation for handling disputes, Know- Your-Customer (KYC) compliance, easy user on-boarding, and being cost- efficient. In this article, a factoring registration protocol is proposed for invoice factoring registration based on a public distributed ledger which adheres to the before-mentioned requirements. We include a relayer in our architecture to address the entry barrier that the users have due to the need of managing cryptocurrencies for interacting with the public ledger. Moreover, we leverage the concept of Verifiable Credentials (VCs) for KYC compliance, and allow parties to implement their self-sovereign identities by using decentralized identifiers (DIDs). DIDs enable us to relay on the DIDComm protocol for asynchronous and secure off-chain communica- tions. We analyze our protocol from several security aspects, compare it to the related work, and study a possible business use case. Our evalu- ations demonstrate that our proposal is secure and efficient, and covers requirements not addressed by existing related work., This research has been funded by i3Market (H2020-ICT-2019-2 grant number 871754). This work is also supported by the TCO-RISEBLOCK (PID2019-110224RB-I00), ARPASAT (TEC2015- 70197-R), and by the Generalitat de Catalunya grant 2014-SGR-1504., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

DA2Wa: a secure pairing protocol between a DApp and a wallet for the blockchain scenario, DA2Wa: un protocol de vinculació segur entre una DApp i un wallet per al cas d'ús de blockchain

  • Román García, Fernando
  • Hernández Serrano, Juan
  • Esparza Martín, Óscar
© 2024 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Wallet applications play a crucial role in securely storing users’ private keys needed to interact with the blockchain, while decentralized applications (DApps) take profit of blockchain technologies to create transparent, tamper-proof environments without the need for trust relationships. As DApps need private keys to interact with the blockchain, the secure interconnection of these applications is vital yet still challenging. This article introduces DA2Wa, a protocol designed to establish a secure pairing between a cryptocurrency wallet and a DApp, both of which run as isolated applications on the same machine. The protocol utilizes a six-character PIN exchange mechanism, delivering a security level equivalent to that of Bluetooth. To demonstrate the security of DA2Wa, we employ Tamarin Prover, a tool for symbolically modelling and analysing security protocols., We would like to thank the anonymous referees’ valuable comments and suggestions on the improvement of this paper. This research has been funded by i3-MARKET (H2020-ICT-2019-2 grant number 871754), by the Spanish Ministry of Science and Education under the project TCO-RISEBLOCK (PID2019-110224RB-I00), and finally by the Generalitat de Catalunya under grant 2021-SGR-00594. It is worth noting that this initiative is carried out within the framework of the funds from the Recovery, Transformation, and Resilience Plan, financed by the European Union (Next Generation), under the auspices of the INCIBE Cybersecurity Chair named CARISMATICA., Peer Reviewed, Postprint (published version)