Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Current-Induced Magnetization Control in Insulating Ferrimagnetic Garnets

  • Avci, Can Onur
The research into insulating ferrimagnetic garnets has gained enormous momentum in the past decade. This is partly due to the improvement in the techniques to grow high-quality ultrathin films with desirable properties and the advances in understanding the spin transport within the ferrimagnetic garnets and through their interfaces with conducting materials. In recent years, we have seen remarkable progress in controlling the magnetization state of ferrimagnetic garnets by electrical means in suitable heterostructures and device architectures. These advances have readily placed ferrimagnetic garnets in a favorable position for the future development of insulating spintronic concepts. The purpose of this article is to review recent experimental results of the current-induced magnetization control and associated phenomena in ferrimagnetic garnets, as well as to discuss future directions in this rapidly evolving area of spintronics., The author thanks Dr. Lucas Caretta and Martin Testa Anta for fruitful discussions. The author acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (project MAGNEPIC, grant agreement No. 949052)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sputtered terbium iron garnet films with perpendicular magnetic anisotropy for spintronic applications

  • Damerio, Silvia
  • Avci, Can Onur
We report the structural, magnetic, and interfacial spin transport properties of epitaxial terbium iron garnet (TbIG) ultrathin films deposited by magnetron sputtering. High crystallinity was achieved by growing the films on gadolinium gallium garnet (GGG) substrates either at high temperature, or at room temperature followed by thermal annealing, above 750 {\deg}C in both cases. The films display large perpendicular magnetic anisotropy (PMA) induced by compressive strain, and tunable structural and magnetic properties through growth conditions or the substrate lattice parameter choice. The ferrimagnetic compensation temperature (TM) of selected TbIG films was measured through temperature-dependent anomalous Hall effect (AHE) in Pt/TbIG heterostructures. In the studied films, TM was found to be between 190-225 K, i.e., approximately 25-60 K lower than the bulk value, which is attributed to the combined action of Tb deficiency and oxygen vacancies in the garnet lattice evidenced by x-ray photoelectron spectroscopy measurements. Sputtered TbIG ultrathin films with large PMA and highly tunable properties reported here can provide a suitable material platform for a wide range of spintronic experiments and device applications., We would like to thank Professor Josep Funtcuberta, Dr. Martín Testa Anta, and Stefano Fedel for the insightful discussions. The authors acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (project MAGNEPIC, Grant Agreement No. 949052)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Leveraging symmetry for an accurate spin-orbit torques characterization in ferrimagnetic insulators

  • Testa Anta, Martín
  • Lambert, Charles-Henri
  • Avci, Can Onur
Spin-orbit torques (SOTs) have emerged as an efficient means to electrically control the magnetization in ferromagnetic heterostructures. Lately, an increasing attention has been devoted to SOTs in heavy metal (HM)/magnetic insulator (MI) bilayers owing to their tunable magnetic properties and insulating nature. Quantitative characterization of SOTs in HM/MI heterostructures are, thus, vital for fundamental understanding of charge-spin interrelations and designing novel devices. However, the accurate determination of SOTs in MIs have been limited so far due to small electrical signal outputs and dominant spurious thermoelectric effects caused by Joule heating. Here, we report a simple methodology based on harmonic Hall voltage detection and macrospin simulations to accurately quantify the damping-like and field-like SOTs, and thermoelectric contributions separately in MI-based systems. Experiments on the archetypical Bi-doped YIG/Pt heterostructure using the developed method yield precise values for the field-like and damping-like SOTs, reaching -0.14 and -0.15 mT per 1.7x$10^{ 11}$ A/$m^2$, respectively. We further reveal that current-induced Joule heating changes the spin transparency at the interface, reducing the spin Hall magnetoresistance and damping-like SOT, simultaneously. These results and the devised method can be beneficial for fundamental understanding of SOTs in MI-based heterostructures and designing new devices where accurate knowledge of SOTs is necessary., The authors acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (project MAGNEPIC, grant agreement no. 949052) and from the Spanish Ministry of Science and Innovation through grant reference no. PID2021-125973OA-I00. M.T.-A. acknowledges financial support from the Spanish Ministry of Science and Innovation under grant FJC2021-046680-I., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oscillatory behavior of interlayer Dzyaloshinskii-Moriya interaction by spacer thickness variation

  • Demiroglu, Emre
  • Hancioglu, Kaan
  • Yavuz, Ilhan
  • Avci, Can Onur
  • Deger, Caner
The interlayer Dzyaloshinskii-Moriya interaction (IL-DMI) has recently emerged as an ingredient promoting chiral orthogonal coupling between adjacent magnetic layers in multilayered systems. IL-DMI offers an additional tuning knob to engineer the magnetic behavior in spintronic devices, which could be useful for nonvolatile logic and memory technologies. Here, we systematically study, via first-principles calculations and the three-site Fert-Lévy model, the spacer thickness dependence of the IL-DMI between an out-of-plane ferrimagnet TbCo and an in-plane ferromagnet Co through Pt, Ir, Pd, and Ru. We observed a damped oscillatory behavior with increasing spacer thickness in all cases with characteristic amplitude and periodicity. Furthermore, we established a direct correlation between the IL-DMI and density of states of bottom and top Co atoms, dominated by the spacer thickness, which is attributed to a hybridization of electronic orbitals. Based on this compelling evidence, we propose that the electronic orbital hybridization contributes to the microscopic origin of the IL-DMI metallic magnetic multilayers. We anticipate that our results will provide insights into the understanding and precise control of IL-DMI in a wide range of materials and spintronic device concepts., Computing resources used in this work were provided by the National Center for High Performance Computing of Turkey (UHeM) under the grant number 123N420 of The Scientific and Technological Research Council of Turkey (TUBITAK). Computational analysis are performed at the Simulations and Modeling Research Lab (Simulab), Physics Department of MU. C.O.A. acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (project MAGNEPIC, Grant Agreement No. 949052) and from the MUST project with reference PCI2023-143400/MCIU/AEI/10.13039/501100011033 co-funded by the European Union. The authors thank Kerem Iscan for fruitful discussions., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetoresistive detection of perpendicular switching in a magnetic insulator

  • Damerio, Silvia
  • Sunil, Achintya
  • Janus, Weronika
  • Mehraeen, Mandela
  • Zhang, Steven S.L.
  • Avci, Can Onur
Spintronics offers promising routes for efficient memory, logic, and computing technologies. The central challenge in spintronics is electrically manipulating and detecting magnetic states in devices. The electrical control of magnetization via spin-orbit torques is effective in both conducting and insulating magnetic layers. However, the electrical readout of magnetization in the latter is inherently difficult, limiting their use in practical applications. Here, we show magnetoresistive detection of perpendicular magnetization reversal in an electrically insulating ferrimagnet, terbium iron garnet (TbIG). To do so, we use TbIG|Cu|TbCo, where TbCo is the reference conducting ferrimagnet and Cu is a nonmagnetic spacer. Current injection through Cu|TbCo allows us to detect the magnetization reversal of TbIG with a simple resistance readout during an external magnetic field sweep. By examining the effect of measurement temperature, TbCo composition, and Cu thickness on the sign and amplitude of the magnetoresistance, we conclude that the spin-dependent electron scattering at the TbIG|Cu interface is the underlying cause. Magnetoresistive detection of perpendicular switching in a ferrimagnetic garnet may enable alternative insulating spintronic device concepts., S.D. and C.O.A. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (project MAGNEPIC, grant agreement no. 949052). C.O.A. and W.J. acknowledge funding from the Spanish Ministry of Science and Innovation (MICIU/AEI/10.13039/501100011033) through grant reference no. CNS2022-136060. Work by A.S., M.M., and S.S.-L.Z. was supported by the College of Arts and Sciences, Case Western Reserve University. The authors thank M. Fettizio for the insightful discussions., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Harmonic Hall characterization of voltage-controlled magnetic anisotropy at ferromagnet/oxide interfaces

  • Fettizio, Matteo
  • Avci, Can Onur
A quantitative method based on harmonic Hall voltage analysis for measuring gate voltage-driven changes in magnetic anisotropy at ferromagnet/oxide (FM/Ox) interfaces has been developed and experimentally validated. The method involves applying an AC voltage simultaneously across the Hall bar and oxide gate using the same voltage source, measuring the first and second harmonic Hall voltage responses, and performing subsequent data analysis. Measurements conducted at high modulation frequencies primarily probe electrostatic effects while minimizing the influence of slower magnetoionic dynamics. Based on the devised method, the voltage-controlled magnetic anisotropy (VCMA) efficiency for the Co/AlOx interface is found to be approximately -40 fJ/(V m), which is in agreement with previous reports. Additionally, this approach enables the measurement of voltage-induced changes in anomalous Hall resistance. The results are interpreted using a spin-dependent screening model, which describes the experimental data remarkably well. The developed methodology applies to a wide range of materials for characterizing and optimizing VCMA and related phenomena in spintronic devices., We acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Project MAGNEPIC, Grant Agreement No. 949052) and financial support from the State Investigation Agency through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetoresistive reading of perpendicular magnetization in ferrimagnetic insulators enhanced through proximity coupling

  • Janus, Weronika
  • Li, Weibin
  • Valvidares, Manuel
  • Avci, Can Onur
Ferrimagnetic insulators with perpendicular magnetic anisotropy exhibit unique properties that offer potential for advanced spintronic devices. One of the challenges in exploiting these materials in spintronics lies in the efficient electrical detection of their magnetization. Herein we report the magnetoresistive detection of perpendicular magnetization in insulating ferrimagnetic garnets, enhanced through proximity coupling with an adjacent ultrathin ferromagnetic layer. We design and characterize a hybrid spin-valve device consisting of terbium iron garnet (TbIG)/Co/Cu/Tb-Co multilayers where TbIG and Tb-Co are perpendicularly magnetized soft and hard layers, respectively, while Co is in-plane magnetized. We reveal through anomalous Hall effect and x-ray magnetic circular dichroism measurements that the interfacial exchange coupling between TbIG and Co induces a perpendicular magnetization component in the Co layer, which increases the magnetoresistance readout signal by more than 2 orders of magnitude-reaching 0.2%-compared with the reference system without the Co layer. A notable but less pronounced enhancement is observed in the YIG/Co-Fe-B/Cu/Tb-Co spin-valve device compared with the stack without the Co-Fe-B insertion, demonstrating the applicability of the approach to similar structures. Finally, we show that the magnetoresistive output signal can be effectively used to probe the multidomain state of TbIG, opening a path for future insulating spintronic device applications., W.J. and C.O.A. acknowledge funding from the Spanish Ministry of Science and Innovation (MICIU/AEI/10.13039/501100011033) through Grant No. CNS2022-136060 and from the State Investigation Agency through the Severo Ochoa Program for Centers of Excellence in R&D (CEX2023-001263-S). C.O.A. acknowledges funding from the European Research Council under the European Union’s Horizon 2020 research and innovation program (project MAGNEPIC, Grant No. 949052). This work was conducted in part within the MAI-SKY (PID2021-125973OA-I00) project funded by MCIN/AEI/ 10.13039/501100011033/FEDER, UE. We thank J. Alejandro de Sousa for his assistance with the preparation of YIG samples., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Decomposing measurements of the anomalous Nernst and spin Seebeck effects in Fe-based metallic multilayers

  • Sousa, J. Alejandro de
  • Damerio, Silvia
  • Koraltan, Sabri
  • Avci, Can Onur
Anomalous Nernst (ANE) and spin Seebeck effects (SSE) are ubiquitous in conducting magnetic materials subject to temperature gradients. Their characterization in metallic systems is especially strenuous because of their indistinguishable symmetry. Here, we report on the accurate characterization of the ANE and SSE in Fe-based multilayers at and above room temperature. We reveal that both effects consist of temperature-dependent and -independent components. At high temperatures, we provide evidence that the ANE decreases mainly due to reduced magnetization and spin polarization of free electrons, whereas the SSE increases owing to the enhanced thermal magnon density. We show that the relative strength of ANE and SSE can be tuned by thickness, stacking order, and doping concentration in various Fe-based multilayers, opening the way for thermoelectric device engineering., We thank Stefano Fedel and Matteo Fettizio for insightful discussions. J.A.D.S. and C.O.A. acknowledge funding from the CONVERT project with administrative reference TED2021-129540A-I00 financed by MCIN/AEI/10.13039/501100011033 and the European Union through the “NextGenerationEU” funds. C.O.A. acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (project MAGNEPIC, Grant Agreement No. 949052). S.D. acknowledges funding from the Marie Skłodowska-Curie Actions (MSCA) under the European Union’s Horizon Europe research and innovation programme (project SPINDY, Grant Agreement No. 101106885). J.A.D.S., C.O.A., and S.D. acknowledge financial support from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of Long-Range Dzyaloshinskii–Moriya Interaction at Ferrimagnetic Insulator/Nonmagnetic Metal Interfaces

  • Fedel, Stefano
  • Villa, Mario
  • Damerio, Silvia
  • Demiroglu, Emre
  • Deger, Caner
  • Gázquez, Jaume
  • Avci, Can Onur
The Dzyaloshinskii-Moriya interaction (DMI) is a chiral magnetic exchange interaction promoting the perpendicular alignment of neighboring spins. The DMI typically occurs in materials characterized by inversion asymmetry and strong spin-orbit coupling, such as ferromagnetic/nonmagnetic metal (FM/NM) interfaces. The microscopic origin of this interfacial DMI is commonly described by the three-site Levy–Fert model, where neighboring atomic moments interact through the vicinal non-magnetic atoms. Herein, evidence of substantial DMI arising from long-range interactions with a non-local interface is shown, extending the conventional viewpoint. The interfacial DMI in a ferrimagnetic insulator, Tb3Fe5O12 (TbIG), is measured as a function of thickness and interfaced with various NMs. By correlating the DMI with the interfacial spin transport and atomically-resolved electron microscopy, the TbIG/NM interface is identified as the dominant source of DMI in these structures. Using Cu as a spacer modifies the interfacial DMI substantially due to a long-range interaction of TbIG with the Cu/NM interface. Density functional theory calculations on similar structures support these experimental findings and the proposed interpretation. These results provide new insights into the fundamental understanding and engineering of interfacial DMI and will stimulate research in other materials with overarching implications for domain wall and skyrmion-based devices., S.F. and C.O.A. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (project MAGNEPIC, Grant Agreement No. 949052). S.D. acknowledges funding from Marie Skłodowska–Curie Actions (MSCA) under the European Union's Horizon Europe research and innovation programme (project SPINDY, Grant Agreement No. 101106885). This work was conducted in part within the MAI-SKY (PID2021-125973OA-I00) project funded by MCIN/AEI/ 10.13039/501100011033/FEDER, UE. The author acknowledge financial support from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S). Computing resources used in this paper were provided by the National Center for High Performance Computing of Turkey under Grant No. 1015902023 via the project 123N420 of The Scientific and Technological Research Council of Turkey. M.V. and J.G. acknowledge financial support from Projects No. PID2020-118479RBI00 and PID2023-152225NB-I00. The author also acknowledge the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 from the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable Spin and Orbital Torques in Cu-Based Magnetic Heterostructures

  • Damerio, Silvia
  • Avci, Can Onur
21 pages, 5 figures, 13 pages SI, Current-induced torques originating from earth-abundant 3d elements offer a promising avenue for low-cost and sustainable spintronic memory and logic applications. Recently, orbital currents─transverse orbital angular momentum flow in response to an electric field─have been in the spotlight since they allow current-induced torque generation from 3d transition metals. Here, we report a comprehensive study of the current-induced spin and orbital torques in Cu-based magnetic heterostructures. We show that high torque efficiencies can be achieved in engineered Ni80Fe20/Cu bilayers where Cu is naturally oxidized, exceeding the ones found in the archetypical Co/Pt. Furthermore, we demonstrate sign and amplitude control of the damping-like torque by manipulating the oxidation state of Cu via solid-state gating. Our findings provide insights into the interplay between charge, spin, and orbital transport in Cu-based heterostructures and open the door to the development of gate-tunable spin-orbitronic devices., S.D. acknowledges funding from the Marie Sklodowska-Curie Actions (MSCA) under the European Union’s Horizon Europe research and innovation programme (project SPINDY, Grant Agreement No. 101106885). C.O.A. acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (project MAGNEPIC, Grant Agreement No. 949052). We acknowledge financial support from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S). We thank Loes Fransen for initial tests on gated structures and fruitful discussions., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly Efficient Current-Induced Torques Originating from Topological Surface States in Sb2Te3

  • Fettizio, Matteo
  • Avci, Can Onur
  • Mantovan, Roberto
  • Longo, Emanuele
Topological insulators (TIs) have shown great promise for the development of energy-efficient and ultra-fast spintronic devices leveraging charge-spin interconversion (CSIC) mechanisms. Among them, chalcogenide-based TIs stand out for their compatibility with wafer-scale growth techniques. Recent studies have validated the topological properties of Sb<inf>2</inf>Te<inf>3</inf> thin films grown via metal–organic chemical vapor deposition on 4-inch wafers. To advance Sb<inf>2</inf>Te<inf>3</inf>-based devices toward practical applications, CSIC efficiency must be evaluated under charge current injection in miniaturized electronic devices. The present study investigates spin-orbit torque (SOT) and magnetoresistive responses in Sb<inf>2</inf>Te<inf>3</inf>/Au/Co/Au. Measurements reveal the high SOT efficiency acting on Co and originating from Sb<inf>2</inf>Te<inf>3</inf>, equivalent to a spin Hall angle up to 62.8 ± 3.2, and a spin Hall conductivity up to 3.6 ± 0.2 × 10<sup>6</sup> (Formula presented.). These findings underscore the potential of the Sb<inf>2</inf>Te<inf>3</inf> TI as a leading candidate for efficient spintronic devices, providing a solid foundation for its integration into novel functional devices., The authors acknowledge financial support from the PNRR MUR project PE0000023-NQSTI and the SPIGA project funded by the European Union – NextGenerationEU - PNRR - M4C2, Investment Line 1.1 - PRIN 2022 - ID P2022LXNYN. The authors also acknowledge financial support from projects No. PID2023-152225NB-I00 and Severo Ochoa MATRANS42 (No. CEX2023-001263-S) of the Spanish Ministry of Science and Innovation (Grant No. MICIU/AEI/10.13039/501100011033 and FEDER, EU)''), Projects No. TED2021-129857B-I00 and PDC2023-145824-I00 funded by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR and by project n° 2021 SGR 00445 by the Generalitat de Catalunya. The authors also acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (project MAGNEPIC, Grant Agreement No. 8 REFERENCES 949052)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Miniaturized Transverse Thermoelectric Device for Efficient Energy Harvesting and its Capacitive Storage

  • Sousa, J. Alejandro de
  • Sánchez Villegas, Emma
  • Avci, Can Onur
A significant amount of energy is lost in microelectronics due to resistive heating. While efficient thermal energy dissipation has been the main engineering concern, the efforts to recycle it have resulted in little success. Here, a transverse thermoelectric device is realized with a footprint <0.17 mm<sup>2</sup> and thermoelectric output >10 mV. The device combines the anomalous Nernst and spin Seebeck effects to generate a transverse voltage in response to a temperature gradient that simulates a realistic microelectronic environment. The device consists of ferrimagnetic CoTb and nonmagnetic metals in a heterostructure grown on a Silicon substrate. Tunable magnetic and electronic properties of CoTb enable significant thermoelectric conversion and external field-free operation simultaneously. It is shown that the output energy can be stored in an electrolytic capacitor. The device stability is tested over 250 charge–discharge cycles with no degradation or fatigue. These findings constitute a key step toward embedded on-chip energy harvesters that can be easily integrated into electronic architectures where significant heat is produced on the microscopic scale., The authors thank Dr. Silvia Damerio, Stefano Fedel, and Matteo Fettizio for insightful discussions. J.A.D.S. and C.O.A. acknowledge funding from the CONVERT project with administrative reference TED2021-129540A-I00 financed by MCIN/AEI/10.13039/501100011033 and the European Union through the “NextGenerationEU” funds. C.O.A. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (project MAGNEPIC, Grant No. 949052). Authors acknowledge financial support from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable Magnetism and Intrinsic Exchange Bias in Al-Substituted Terbium Iron Garnet

  • Shiino, Takayuki
  • Fettizio, Matteo
  • Estandía, Saúl
  • Avci, Can Onur
Ferrimagnetic insulators are central to both fundamental magnetism and diverse technologies, including spintronics, photonics, and microwave engineering. Their low damping, electrical insulation, and tunable magnetism make them ideal, especially for low-power spintronic devices. Controlling key magnetic properties —particularly the magnetic compensation— is essential for accessing ultrafast dynamics, and advanced spintronic functionalities. Here, it is demonstrated that the magnetic compensation temperature (T<inf>M</inf>) of an archetype ferrimagnetic insulator, terbium iron garnet (Tb<inf>3</inf>Fe<inf>5</inf>O<inf>12</inf>, TbIG), can be continuously tuned and raised to ambient temperature by partially substituting magnetic Fe atoms with nonmagnetic Al. This substitution, achieved by high-temperature co-sputtering of TbIG and Al<inf>2</inf>O<inf>3</inf>, is confirmed by atomically resolved electron microscopy. Near T<inf>M</inf>, a giant intrinsic exchange bias of up to 2.5 kOe is observed. The exchange bias exhibits deterministic or stochastic behavior depending on the cooling conditions, and its polarity can be controlled via an external magnetic field. To explain the observed phenomena, a phenomenological model is developed that takes into account a distribution of local T<inf>M</inf> values induced by magnetic site disorder. These findings provide an efficient strategy for controlling T<inf>M</inf> and enabling exchange bias in TbIG that may add new functionalities for room-temperature spintronic and photonic applications., The authors acknowledged funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (project MAGNEPIC, Grant Agreement No. 949052). T.S. acknowledged financial support from the Beatriu de Pinós Programme (Grant No. 2023 BP 00168), managed by the Agency for Management of University and Research Grants (AGAUR), and funded by the Secretariat of Universities and Research, Ministry of Enterprise and Knowledge of the Government of Catalonia. S.E. acknowledged financial support from PTA2023-023170-I, funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+). The authors thank the scientific services of the Institut de Ciència de Materials de Barcelona (ICMAB-CSIC) for XRD and low-temperature experiments. The authors acknowledged the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. This work was conducted in part within the MAI-SKY (PID2021-125973OA-I00) project funded by MCIN/AEI/ 10.13039/501100011033/FEDER, UE. The authors acknowledged financial support from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magneto-ionic control of perpendicular anisotropy in epitaxial Mn4N films

  • Damerio, Silvia
  • Apetrei, Teodor
  • Avci, Can Onur
We report reversible control of the magnetism and perpendicular magnetic anisotropy (PMA) in Mn<inf>4</inf>N thin films through solid-state magneto-ionic gating. We grow Mn<inf>4</inf>N on MgO(100) substrates, exhibiting bulk-like magnetization and strain-induced PMA, also promoted by capping the film with material with large spin–orbit coupling. We demonstrate that the interfacial anisotropy can be reversibly tuned through voltage-driven nitrogen ion migration when Mn<inf>4</inf>N is in contact with a nitrogen-affine metal, such as Ta and V. We also show that solid-state gating effectively enhances the spin–orbit torque switching efficiency by reducing the coercive field without compromising the interface transparency. Finally, we demonstrate that gate-tunable devices can be harnessed for efficient nonvolatile memory functionality., S.D. acknowledges funding from the Marie Sklodowska-Curie Actions (MSCA) under the European Union's Horizon Europe research and innovation programme (project SPINDY, Grant Agreement No. 101106885). S.D. and C.O.A. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (project MAGNEPIC, Grant Agreement No. 949052). T.A. and C.O.A. acknowledge funding from the MUST project with reference PCI2023-143400/MCIU/AEI/10.13039/501100011033 (Plan Estatal de Investigación Científica y Técnica y de Innovación 2021–2023) co-funded by the European Union. We acknowledge financial support from the State Investigation Agency, through the Severo Ochoa Programme for the Centres of Excellence in R&D (CEX2023-001263-S). We also acknowledge the ICMAB-CSIC Scientific & Technical Services: X-ray Diffraction Laboratory (F. J. Campos López) and Low Temperatures and Magnetometry (B. Bozzo Closas and F. Vallés Pérez)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient spin-orbit torque switching in a magnetic insulator via ultrathin Pt and light metal overlayers

  • Fedel, Stefano
  • Avci, Can Onur
Spin-orbit torques (SOTs) are essential for electrically controlling magnetic order in spintronic devices. Platinum (Pt) is ubiquitous for SOT generation due to its strong bulk spin Hall and interfacial Rashba-Edelstein effects. Here, we revisit this established viewpoint by investigating ultrathin Pt films interfaced with a typical magnetic insulator, terbium iron garnet. We find that few-atom-thick, nanogranular Pt exhibits exceptionally efficient SOT-induced switching that cannot be explained by these conventional mechanisms. This enhancement is attributed to the granular morphology of sputtered Pt, which activates two complementary mechanisms: enhanced spin-orbit scattering at grain boundaries, leading to an increased effective spin Hall angle, and localized current density amplification due to non-uniform conduction paths. Furthermore, adding a titanium (Ti) or manganese (Mn) overlayer to thin Pt enhances the switching efficiency, indicating an active contribution from light metals via orbital current generation. These findings uncover key SOT pathways in ultrathin heterostructures and provide insights for optimizing spin-orbitronic device performance and enabling energy-efficient magnetic switching., We acknowledge the technical support from the ICMAB Scientific and Technical Services. In particular, we thank Saul Estandia for performing the TEM imaging and analysis. We acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (project MAGNEPIC, Grant Agreement No. 949052). This work was conducted in part within the MAI-SKY (PID2021-125973OA-I00) project funded by MCIN/AEI/ 10.13039/501100011033/FEDER, UE. We acknowledge financial support from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed