Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Exploring the factors affecting carbon and nutrient concentrations in tree biomass components in natural forests, forest plantations and short rotation forestry

  • Rodríguez Soalleiro, Roque
  • Eimil Fraga, Cristina
  • Gómez García, Esteban
  • García Villabrille, Juan Daniel
  • Rojo Alboreca, Alberto
  • Muñoz, Fernando
  • Oliveira Rodríguez, Nerea de
  • Sixto Blanco, Hortensia
  • Pérez Cruzado, César
Background: Coupling biomass models with nutrient concentrations can provide sound estimations of carbon and nutrient contents, enabling the improvement of carbon and nutrient balance in forest ecosystems. Although nutrient concentrations are often assumed to be constant for some species and specific tree components, at least in mature stands, the concentrations usually vary with age, site index and even with tree density.The main objective of this study was to evaluate the sources of variation in nutrient concentrations in biomass compartments usually removed during harvesting operations, covering a range of species and management conditions: semi-natural forest, conventional forest plantations and short rotation forestry (SRF). Five species (Betula pubescens, Quercus robur, Eucalyptus globulus, Eucalyptus nitens and Populus spp.) and 14 genotypes were considered. A total of 430 trees were sampled in 61 plots to obtain 6 biomass components: leaves, twigs, thin branches, thick branches, bark and wood. Aboveground leafless biomass was pooled together for poplar. The concentrations of C, N, K, P, Ca, Mg, S, Fe, Mn, Cu, Zn and B were measured and the total biomass of each sampled tree and plot were determined. The data were analysed using boosted regression trees and conventional techniques. Results: The main sources of variation in nutrient concentrations were biomass component >> genotype (species) ≈ age > tree diameter. The concentrations of Ca, Mg and K were most strongly affected by genotype and age. The concentrations of P, K, Ca, Mg, S and Cu in the wood component decreased with age, whereas C concentrations increased, with a trend to reach 50% in the older trees. In the SRF, interamerican poplar and P. trichocarpa genotypes were comparatively more efficient in terms of Ca and K nutrient assimilation index (NAI) (+ 65 – 85%) than eucalypts, mainly because leafless biomass can be removed. In the conventional eucalypt plantations (rotation 15 years), debarking the wood at logging (savings of 225% of Ca and 254% of Mg for E. globulus) or the use of selected genotypes (savings of 45% of P and 35% of Ca) will provide wood at a relatively lower nutrient cost. Considering all the E. globulus genotypes together, the management for pulp with removal of debarked wood shows NAI values well above (× 1.7 – × 3.9) the ones found for poplar or eucalypt SRF and also higher (× 1.6 – × 4.0) than the ones found for oak and birch managed in medium or long rotations. The annual rates of nutrient removal were low in the native broadleaved species but the rates of available soil nutrients removed were high as compared to poplar or eucalypts. Management of native broadleaved species should consider nutrient stability through selection of the biomass compartments removed. Conclusions: The nutrient assimilation index is higher in poplar grown under short rotation forestry management than in the other systems considered. Nutrient management of fast growing eucalyptus plantations could be improved by selecting efficient genotypes and limiting removal of wood. The values of the nutrient assimilation index are lower in the natural stands of native broadleaved species than in the other systems considered.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

EucaTool®: aplicación web para estimar el crecimiento y la producción de plantaciones de Eucalyptus globulus Labill. en Galicia

  • Rojo Alboreca, Alberto
  • García Villabrille, Juan Daniel
  • Pérez Rodríguez, Fernando
EucaTool® es una aplicación gratuita de software “en la nube” que ha sido desarrollada para estimar el crecimiento y la producción de plantaciones de brinzales y clonales de eucalipto (Eucalyptus globulus Labill.) de primer turno en Galicia. La aplicación se ha diseñado para poner a disposición de propietarios, empresas y gestores forestales la posibilidad de calcular de forma muy sencilla el volumen y la biomasa de dichas plantaciones a partir de datos de árboles individuales o de datos de rodal, así como una estimación de su crecimiento y producción futura (indicando la edad óptima de corta por máxima renta en especie) a partir de la medición de solamente cuatro variables medias del rodal: edad, número de árboles por hectárea, altura dominante y área basimétrica. EucaTool® implementa un modelo dinámico de crecimiento y producción válido para plantaciones clonales y no clonales de primer turno de la especie en la región y que integra diferentes módulos o funciones de transición para la altura dominante (curvas de calidad de la estación), número de pies por hectárea (función de mortalidad) y área basimétrica, junto con ecuaciones o tarifas de cubicación y de biomasa. Puede accederse a EucaTool® desde cualquier dispositivo con conexión a internet desde la dirección: http://app.eucatool.com Además, toda la información relativa al uso de la aplicación está publicada en una web ligada al aplicativo: http://www.eucatool.com
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Comparing Johnson’s SBB, Weibull and Logit-Logistic bivariate distributions for modeling tree diameters and heights using copulas

  • Gorgoso Varela, José Javier
  • García Villabrille, Juan Daniel
  • Rojo Alboreca, Alberto
  • Gadow, Klaus von
  • Álvarez González, Juan Gabriel
Aim of study: In this study we compare the accuracy of three bivariate distributions: Johnson’s SBB, Weibull-2P and LL-2P functions for characterizing the joint distribution of tree diameters and heights. Area of study: North-West of Spain. Material and methods: Diameter and height measurements of 128 plots of pure and even-aged Tasmanian blue gum (Eucalyptus globulus Labill.) stands located in the North-west of Spain were considered in the present study. The SBB bivariate distribution was obtained from SB marginal distributions using a Normal Copula based on a four-parameter logistic transformation. The Plackett Copula was used to obtain the bivariate models from the Weibull and Logit-logistic univariate marginal distributions. The negative logarithm of the maximum likelihood function was used to compare the results and the Wilcoxon signed-rank test was used to compare the related samples of these logarithms calculated for each sample plot and each distribution. Main results: The best results were obtained by using the Plackett copula and the best marginal distribution was the Logit-logistic. Research highlights: The copulas used in this study have shown a good performance for modeling the joint distribution of tree diameters and heights. They could be easily extended for modelling multivariate distributions involving other tree variables, such as tree volume or biomass
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

EucaTool®, a cloud computing application for estimating the growth and production of Eucalyptus globulus Labill

  • Rojo Alboreca, Alberto
  • García Villabrille, Juan Daniel
  • Pérez Rodríguez, Fernando
Aim of study: To present the software utilities and explain how to use EucaTool®, a free cloud computing application developed to estimate the growth and production of seedling and clonal blue gum (Eucalyptus globulus Labill.) plantations in Galicia (NW Spain). Area of study: Galicia (NW Spain). Material and methods: EucaTool® implements a dynamic growth and production model that is valid for clonal and non-clonal blue gum plantations in the region. The model integrates transition functions for dominant height (site index curves), number of stems per hectare (mortality function) and basal area, as well as output functions for tree and stand volume, biomass and carbon content. Main results: EucaTool® can be freely accessed from any device with an Internet connection, from http://app.eucatool.com. In addition, useful information about the application is published on a related website: http://www.eucatool.com. Research highlights: The application has been designed to enable forest stakeholders to estimate volume, biomass and carbon content of forest plantations from individual trees, diameter classes or stand data, as well as to estimate growth and future production (indicating the optimal rotation age for maximum income) by measurement of only four stand variables: age, number of tres per hectare, dominant height and basal area
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Modeling extreme values for height distributions in Pinus pinaster, Pinus radiata and Eucalyptus globulus stands in northwestern Spain

  • Gorgoso Varela, José Javier
  • García Villabrille, Juan Daniel
  • Rojo Alboreca, Alberto
Methods of estimating extreme height values can be used in forest modeling to improve fits to the marginal distribution of heights in the following bivariate diameter-height models: the SBB Johnson’s distribution, the bivariate beta (GDB-2) distribution, the bivariate Logit-Logistic (LL-2) distribution and the power-normal (PN) distribution. Some applications to LiDAR derived data are also possible, e.g., for error calibration. Practical applications in forest management may also be considered, e.g., for pruning. In probability theory and statistics, the generalized extreme value (GEV) distribution, also known as the Fisher-Tippett distribution, is a family of continuous probability distributions that combine the Gumbel, Fréchet and Weibull distributions. This study compared the three distributions for fitting extreme values of tree heights (maximum and minimum heights), which were measured in 185 permanent research plots in Pinus pinaster Ait. stands, 97 research plots in Pinus radiata D. Don stands, and 128 research plots in Eucalyptus globulus Labill. Most of the eucalyptus stands were measured three times giving a total of 304 measurements. All plots are located in northwestern Spain. The Bias, Mean Absolute Error (MAE) and Mean Square Error (MSE) of the mean relative frequency of trees were used to evaluate the goodness-of-fit of the different functions, as well as the Kolmogorov-Smirnov statistic Dn. The Gumbel and the Weibull cumulative distribution functions (CDFs) proved suitable for describing extreme values of height distributions of the above-mentioned tree species in northwestern Spain. The Fréchet distribution was only used to model maximum values and yielded the poorest results in all cases.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Establecimiento de una red experimental para el estudio del crecimiento y la producción de Eucalyptus globulus Labill. en el NO de España. Metodología y primeros resultados

  • García Villabrille, Juan Daniel
  • Pérez Cruzado, César
  • Crecente Campo, Felipe
  • Rodríguez Soalleiro, Roque
  • Diéguez Aranda, Ulises
  • Rojo Alboreca, Alberto
En este estudio es presentada una red de parcelas semipermanentes para el estudio del crecimiento y la producción de las plantaciones de Eucalyptus globulus Labill. del NO de España (Galicia y Asturias). Esta red busca representar adecuadamente las posibles combinaciones de edad, calidad de estación y densidad existentes en la región, así como diferenciar entre las plantaciones clonales y no clonales, y entre primeros y sucesivos turnos. En este trabajo se describe la metodología utilizada para la selección, instalación e inventario de las parcelas. Con esta red se pretende obtener, en un plazo de tiempo lo más corto posible, información adecuada y suficiente para elaborar o actualizar herramientas selvícolas de apoyo a la toma de decisiones como curvas de calidad de estación, tablas de producción, diagramas de manejo de la densidad o modelos dinámicos de rodal, tarifas de cubicación con clasificación de productos, tarifas de biomasa o de contenido en carbono. Dichas herramientas se implementarán en programas informáticos de sencillo manejo (GesMO©), que facilitarán la simulación de tratamientos selvícolas y el uso de los modelos para la gestión sostenible de estas plantaciones. En todas las parcelas se está realizando un segundo inventario. En este trabajo se describe la metodología utilizada para la selección, instalación e inventario de las parcelas.