Pasar al contenido principal

SISTEMAS DE BAJOS INSUMOS PARA CULTIVOS LEÑOSOS PARA BIOMASA: DESARROLLO Y EVALUACION DE TACTICAS Y ESTRATEGIAS DE GESTION DE MALAS HIERBAS

AGL2011-25243

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

A LiDAR-Based System to Assess Poplar Biomass

  • Andújar, Dionisio
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
  • Rueda-Ayala, Victor
  • Fernandez Quintanilla, C.
  • Ribeiro, Angela
  • Dorado, José
This study evaluated the capabilities of a LiDAR-based system to characterize poplar trees for biomass production. The precision of the system was assessed by analyzing the relationship between the distance records and biophysical parameters. The terrestrial laser scanner (TLS) system consisted of a 2D time-of-flight LiDAR sensor, a gimbal to dynamically stabilize the sensor and a RTK-GPS to georeference its location and, subsequently, the sensor data. The sensor and its stabilizer were fixed facing downwards, on a metal frame designed for this purpose. Then, it was mounted on an all-terrain vehicle to perform 2D scans in planes perpendicular to the travel direction. Distances between the sensor and the surrounding objects had a high spatial resolution, providing high density 3D point clouds. Results on the reliability of the LiDAR system to estimate plant height showed a significant relationship between the sensor readings and actual poplar height and biomass data. In addition, tree biomass and tree volume were properly estimated in the point cloud. Regression analysis showed significant estimates of 0.79 and 0.89 for biomass and volume, respectively. These results reveal the potential of the LiDAR sensor to estimate both, plant height and plant biomass. This sensor's capability, added to its relative low cost, fast reaction, and the high number of readings per second consolidate the ideal system for estimating the productivity of biomass in energy crops. http://link.springer.com/article/10.1007%2Fs10343-016-0369-1, This research was funded by the CICyT (Commision Interministerial de Ciencia y Tecnología, Spain), under Agreement No. AGL2011-25243 and AGL2014-52465-C4.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A LiDAR-Based System to Assess Poplar Biomass

  • Andújar, Dionisio
  • Escolà, A.
  • Rosell Polo, Joan R.
  • Rueda Ayala, Víctor
  • Fernández Quintanilla, César
  • Ribeiro Seijas, Ángela
  • Dorado, José
This study evaluated the capabilities of a LiDAR-based system to characterize poplar trees for biomass production. The precision of the system was assessed by analyzing the relationship between the distance records and biophysical parameters. The terrestrial laser scanner (TLS) system consisted of a 2D time-of-flight LiDAR sensor, a gimbal to dynamically stabilize the sensor and a RTK-GPS to georeference its location and, subsequently, the sensor data. The sensor and its stabilizer were fixed facing downwards, on a metal frame designed for this purpose. Then, it was mounted on an all-terrain vehicle to perform 2D scans in planes perpendicular to the travel direction. Distances between the sensor and the surrounding objects had a high spatial resolution, providing high density 3D point clouds. Results on the reliability of the LiDAR system to estimate plant height showed a significant relationship between the sensor readings and actual poplar height and biomass data. In addition, tree biomass and tree volume were properly estimated in the point cloud. Regression analysis showed significant estimates of 0.79 and 0.89 for biomass and volume, respectively. These results reveal the potential of the LiDAR sensor to estimate both, plant height and plant biomass., This research was funded by the CICyT (Commision Interministerial de Ciencia y Tecnología, Spain), under Agreement No. AGL2011-25243 and AGL2014-52465-C4., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spatio-temporal dynamics of Sorghum halepense in poplar short-rotation coppice under several vegetation management systems

  • San Martín, Carolina
  • Andújar, Dionisio
  • Fernández Quintanilla, Cesar
  • Dorado, José
Weeds are one of the most important factors reducing productivity in poplar short-rotation coppices. Sorghum halepense is a very harmful perennial weed affecting irrigated crops preceding poplar plantations. The main goal of this study is to assess the potential hazards of residual S. halepense patches in newly established poplar crops and the effects of different vegetation control treatments. Our study objectives were: to describe the spatio-temporal dynamics of this perennial weed during the first rotation coppice of poplar in the presence of different vegetation management strategies and to assess the effect that S. halepense has on poplar growth. Experiments were conducted in an experimental field in central Spain and were repeated over time. S. halepense patches were artificially established in a random block design with four replications. Four types of vegetation management were performed: mechanical (field cultivator and rototiller) and chemical (glyphosate and fluazifop-p-butyl). Patches were monitored throughout all the experiments and poplar productivity parameters (height and biomass) were recorded. Monitoring indicated patch displacement towards crop rows, probably due to higher soil moisture levels in this irrigated area, and a reduction in patch density in the central inter-row area owing to different management strategies. However, displacement was barely detected lengthwise, as was originally expected, at least in mechanical management. Mardia’s test (circular statistics) indicated no significant differences in patch displacement between mechanical and chemical strategies. Regarding poplar growth, the mixed linear model indicated no consistent significant differences in terms of vegetation management, differences depending more on the proximity of S. halepense patches. This study has demonstrated that while S. halepense has very limited capacity to spread spatially in poplar short-rotation coppice, its proximity to crop rows may cause important damage in poplar productivity, especially during the first growing season. Therefore, proper management of this weed species is strongly recommended during this period., This work was financially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through the Project AGL2011-25243., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spatial Distribution Patterns of Weed Communities in Corn Fields of Central Spain

  • San Martín, Carolina
  • Andújar, Dionisio
  • Fernández Quintanilla, César
  • Dorado, José
The overall objective of this study was to identify common patterns in the spatial distribution of the major weed species present in the corn-growing region of central Spain, exploring the scale dependence of these patterns and the possible associations or dissociations between individual species. Weed density was assessed in 16 commercial fields using digital images acquired in a 9-m by 9-m sampling grid. A set of six species was found in all the fields: black nightshade, common cocklebur, fierce thornapple, johnsongrass, purple nutsedge, and velvetleaf. Spatial analysis by distance indices and inverse distance weighting interpolation methods were performed to create weed distribution maps. The results showed aggregated spatial distribution patterns for all individual species regardless their life cycle, annual or perennial. Some associations and dissociations among species were found in the analysis of interactions. Nevertheless, the spatial patterns of co-occurrence of weed species were field-specific and therefore cannot be considered general patterns of weed co-occurrence. In order to explore the scale dependence of these results, an additional study was conducted in an experimental field located in the same area using a 1.0-m by 0.75-m sampling grid. Although this resolution allowed for a better definition of the positions of the weed patches and weed-free gaps, the results obtained revealed similar patterns to those observed with a coarser sampling resolution. Nomenclature: Black nightshade, Solanum nigrum L. SOLNI; common cocklebur, Xanthium strumarium L. XANST; fierce thornapple, Datura ferox L. DATFE; johnsongrass, Sorghum halepense (L.) Pers. SORHA; purple nutsedge, Cyperus rotundus L. CYPRO; velvetleaf, Abutilon theophrasti Medik. ABUTH; corn, Zea mays L., This research was funded by the Spanish Comisión Interministerial de Ciencia y Tecnología (project AGL2011-25243)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Using depth cameras to extract structural parameters to assess the growth state and yield of cauliflower crops

  • Andújar, Dionisio
  • Ribeiro Seijas, Ángela
  • Fernández Quintanilla, César
  • Dorado, José
The use of robotic systems for horticultural crops is widely known. However, the use of these systems in cruciferous vegetables remains a challenge. The case of cauliflower crops is of special relevance because it is a hand-harvested crop for which the cutting time is visually chosen. This methodology leads to a yield reduction, as some inflorescences are cut before ripening because the leaves hide their real state of maturity. This work proposes the use of depth cameras instead of visual estimation. Using Kinect Fusion algorithms, depth cameras create a 3D point cloud from the depth video stream and consequently generate solid 3D models, which have been compared to the actual structural parameters of cauliflower plants. The results show good consistency among depth image models and ground truth from the actual structural parameters. In addition, the best time for individual fruit cutting could be detected using these models, which enabled the optimization of harvesting and increased yields. The accuracy of the models deviated from the ground truth by less than 2 cm in diameter/height, whereas the fruit volume estimation showed an error below 0.6% overestimation. Analysis of the structural parameters revealed a significant correlation between estimated and actual values of the volume of plants and fruit weight. These results show the potential of depth cameras to be used as a precise tool in estimating the degree of ripeness during the harvesting of cauliflower and thereby optimizing the crop profitability., The Spanish Ministry of Economy and Competitiveness has provided support for this research via projects: AGL2011-25243 and AGL2014-52465-C4-3-R., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A LiDAR-Based System to Assess Poplar Biomass

  • Andújar, Dionisio
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Sanz Cortiella, Ricardo
  • Rueda-Ayala, Victor
  • Fernandez Quintanilla, C.
  • Ribeiro, Angela
  • Dorado, José
This study evaluated the capabilities of a LiDAR-based system to characterize poplar trees for biomass production. The precision of the system was assessed by analyzing the relationship between the distance records and biophysical parameters. The terrestrial laser scanner (TLS) system consisted of a 2D time-of-flight LiDAR sensor, a gimbal to dynamically stabilize the sensor and a RTK-GPS to georeference its location and, subsequently, the sensor data. The sensor and its stabilizer were fixed facing downwards, on a metal frame designed for this purpose. Then, it was mounted on an all-terrain vehicle to perform 2D scans in planes perpendicular to the travel direction. Distances between the sensor and the surrounding objects had a high spatial resolution, providing high density 3D point clouds. Results on the reliability of the LiDAR system to estimate plant height showed a significant relationship between the sensor readings and actual poplar height and biomass data. In addition, tree biomass and tree volume were properly estimated in the point cloud. Regression analysis showed significant estimates of 0.79 and 0.89 for biomass and volume, respectively. These results reveal the potential of the LiDAR sensor to estimate both, plant height and plant biomass. This sensor's capability, added to its relative low cost, fast reaction, and the high number of readings per second consolidate the ideal system for estimating the productivity of biomass in energy crops. http://link.springer.com/article/10.1007%2Fs10343-016-0369-1, This research was funded by the CICyT (Commision Interministerial de Ciencia y Tecnología, Spain), under Agreement No. AGL2011-25243 and AGL2014-52465-C4.