Pasar al contenido principal

MATRICES PANARIAS DILUIDAS DE CARACTER SALUDABLE Y FUNCIONALIDAD RESTRINGIDA: ESTRATEGIAS DE POTENCIACION DEL CARACTER FUNCIONAL EN SISTEMAS DE TRIGO DESESTRUCTURADOS

AGL2015-63849-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Durum wheat grain yield and quality under low and high nitrogen conditions: insights into natural variation in low- and high-yielding genotypes

  • Mariem, S. B.
  • González Torralba, Jon
  • Collar, Concha
  • Aranjuelo Michelena, Iker
  • Morales Iribas, Fermín
Incluye material complementario, The availability and management of N are major determinants of crop productivity, but N excessive use has an associated agro-ecosystems environmental impact. The aim of this work was to investigate the influence of N fertilization on yield and grain quality of 6 durum wheat genotypes, selected from 20 genotypes as high-and low-yielding genotypes. Two N levels were applied from anthesis to maturity: high (1/2 Hoagland nutrient solution) and low (modified 1/2 Hoagland with one-third of N). Together with the agronomic characterization, grain quality analyses were assessed to characterize carbohydrates concentration, mineral composition, glutenin and gliadin concentrations, polyphenol profile, and anti-radical activity. Nitrogen supply improved wheat grain yield with no effect on thousand-grain weight. Grain soluble sugars and gluten fractions were increased, but starch concentration was reduced, under high N. Mineral composition and polyphenol concentrations were also improved by N application. High-yielding genotypes had higher grain carbohydrates concentrations, while higher concentrations in grain minerals, gluten fractions, and polyphenols were recorded in the low-yielding ones. Decreasing the amount of N to one-third ensured a better N use efficiency but reduced durum wheat agronomic and quality traits., This research was supported by the Spanish MINECO project AGL2016-79868-R, AGL2015-63849-C2-1-R and CSIC (Intramural project). Sinda Ben Mariem had a PhD grant from Navarra Government.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of visco-metric profile of composite dough matrices on starch digestibility and firming and retrogradation kinetics of breads thereof: Additive and interactive effects of non-wheat flours

  • Collar, Concha
The impact of wheat (WT) flour replacement up to 45% (weight basis) by incorporation of ternary blends of teff (T), green pea (GP) and buckwheat (BW) flours on the viscometric pasting and gelling profiles of quaternary blended dough matrices was investigated by applying cooking and cooling cycles to rapid viscoanalyser (RVA) canisters with highly hydrated samples (3.5:25, w:w). Viscometric cooking and cooling parameter trends related to suitable patterns for lower and slower starch hydrolysis, and lower and/or slower firming and starch retrogradation kinetics in blended breads mainly include higher viscosity values for peak viscosity, breakdown on cooking and viscosity of hot (95 °C) paste, but lower viscosity values after gelling (50 °C). These visco-metric requirements for achieving suitable textural and thermal features in blended breads, were met by adding T/GP/BW to replace 22.5% of WT flour in blended dough formulations. Larger WT flour replacement by 37.5% of the ternary mixture T/GP/BW (7.5/15/15) provided hydrated blends with higher values for viscosity of hot (95 °C) paste, and lower viscosity values after gelling (50 °C), in good accordance with poorer formation of rapidly digestible starch and total digestible starch, and more prominent formation of resistant starch and slowly digestible starch in breads, respectively., Financial support of the Spanish institutions Consejo Superior de Investigaciones Científicas (CSIC) and Ministerio de Economía y Competitividad (Projects AGL2011 22669 and AGL2015-63849-C2-1-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Techno-functional and nutritional performance of commercial breads available in Europe

  • Conte, Paola
  • Fadda, Costantino
  • Piga, Antonio
  • Collar, Concha
In recent years, the growing interest for well-being and healthy lifestyle together with an increasing awareness of the close relationship between food and health have boosted the production of an increasing number of novel goods to be placed in both gluten-containing and gluten-free products market. The objective of this study was to provide a realistic and detailed overview of the current bread-market supply in order to evaluate the overall quality of the available offer in this prioritized food industry area. Twenty commercial breads consisting of gluten (n = 10) and gluten-free (n = 10) samples currently available in the European market have been assessed by physical-chemical, technological, nutritional, and sensory determinations. The quality parameters obtained were related to each other by using Pearson correlations, while sample classification was achieved by applying factor analysis. Higher values for protein and bio-accessible polyphenols content, aroma and taste quality, and low and moderate expected glycaemic index corresponded to gluten containing breads. Although the main distinction was between gluten and gluten-free samples as it was expected, classification of breads allowed differentiating samples with different formulations in terms of presence/absence of alternative, innovative, and nutrient-dense raw materials., Financial support of the Spanish institutions Consejo Superior de Investigaciones Científicas (CSIC) and Ministerio de Economía y Competitividad (Projects AGL2011-22669 and AGL2015-63849-C2-1-R). Paola Conte gratefully acknowledges Sardinia Regional Government for the financial support of her PhD scholarship (P.O.R. Sardegna F.S.E. Operational Programme of the Autonomous Region of Sardinia, European Social Fund 2007-2013 – Axis IV Human Resources, Objective l.3, Line of Activity l.3.1.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of heat moisture treatment and hydration level on physico-chemical and viscoelastic properties of doughs from wheat-barley composite flours

  • Collar, Concha
  • Armero, Enrique
The impact of heat moisture treatment (HMT) on the thermoviscous, viscoelastic and mechanical properties of binary flour matrices (wheat:barley, 60:40, wt:wt) was investigated in untreated and HMT (15% moisture content, 1 h heating time at 120 °C) hydrated samples to assess the potential of HMT to modify dough viscoelasticity and doughmaking functionality in diluted breadmaking wheat matrices. HMT significance was tackled (a) in excess of water, by applying successive cooking and cooling cycles to hydrated samples (14%, w:w), determination of viscometric parameters, and subsequent determination of textural (compression test) and viscoelastic parameters (stress relaxation test) in pasted and gelled hydrated flours, and (b) under water restrictions by assessing the consistency (forward extrusion test), the primary and secondary mechanical properties (Texture Profile Analysis), and the viscoelastic behaviour (stress relaxation test) of untreated and HMT mixed doughs made at different flour hydration levels (63 and 70%). In highly hydrated blends, HMT barley flour provided enhanced viscosity patterns regardless of the presence of native or HMT wheat flour, and harder gels with larger initial stress to reach a defined deformation, particularly in the presence of HMT wheat flour. Under restricted water availability, doughs made at 70% hydration level when compared to their counterparts made at 63% explicited lower stress relaxation curves with higher values for both initial decay rate and extent of the decay, shorter relaxation times and higher percent of stress relaxation, giving softer and more cohesive doughs. The most elastic-like dough blends were those prepared with HMT wheat and barley flours at 63% hydration, while the most viscous-like doughs were those from native flours made at 70% hydration., The authors acknowledge the institutions Ministerio de Economía y Competitividad (MINECO) and Federación Europea de Desarrollo Regional (FEDER) for funding the Project AGL2015-63849-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lipid dynamics in blended wheat and non-wheat flours breadmaking matrices: Impact on fresh and aged composite breads

  • Collar, Concha
  • Conte, Paola
The use of pseudocereals, legumes and ancient grains for breadmaking applications is receiving particular attention since they involve nutrient dense grains with proven health-promoting attributes. Dilution up to 45% of the basic wheat flour matrix by accumulative ternary addition of teff, green pea and buckwheat flours did significantly impact both the extractability and distribution of lipid subfractions in composite flours, doughs and breads, and induced differentiated dynamics in lipid binding along breadmaking. During mixing, a preferential covalent lipid binding to the inside part of the starch granules takes place at the expenses of both accessible free lipids and lipids initially bound non-covalently to the gluten/non-gluten proteins and to the outside part of the starch granules. During fermentation and later baking a preferential lipid binding to the gluten/non-gluten proteins and to the outside and inside starch granules takes place at the expenses of both a free lipid displacement and a bound lipid translocation to new protein and starch active sites. It can be noticed that the larger the accumulation of both protein- and starch-bound lipids over fermentation and baking, the higher physic-chemical and sensory profiles, and the slower starch hydrolysis, firming and retrogradation kinetics of composite breads were obtained., The authors acknowledge the financial support of Consejo Superior de Investigaciones Científicas (CSIC), Ministerio de Economía y Competitividad (MINECO) and Fondo Europeo de Desarrollo Nacional (FEDER) (Project AGL2015-63849-C2-1-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Legume Wheat-Based Matrices: Impact of High Pressure on Starch Hydrolysis and Firming Kinetics of Composite Breads

  • Collar, Concha
  • Angioloni, Alessandro
The significance of high hydrostatic pressure (HHP) processing on the physico-chemical—techno-functional and firming kinetics—parameters and nutritional properties—nutritional composition and “in vitro” starch digestibility—of highly replaced wheat flour breads by chickpea, pea and soybean flours was investigated, and the power/effectiveness of HHP in partially replacing structural agents (gluten and/or hydrocolloids) was discussed. Incorporation of pressured legume slurries (350 MPa, 10 min) at 42% of wheat replacement into bread formulation provoked a general increase in initial crumb hardness and browning of the crust with a concomitant explicit reduction of moisture, whiteness of the crumb and bread specific volume, but a slower in vitro starch digestibility with prominent formation of slowly digestible starch and resistant starch, compared to their counterparts prepared by using a conventional gluten/carboxymethyl cellulose (CMC)-added breadmaking recipe/process. Pressured breads with no gluten but 3% CMC in the formulation kept higher sensory ratings, softer initial texture and lower firming profiles on ageing than pressured breads with no gluten nor CMC. HHP has proven to be an effective technology to partially replace structuring agents (CMC and/or gluten) in high-legume wheat-based matrices providing sensorially acceptable breads with medium physico-chemical quality profile but enhanced formation of nutritionally relevant starch fractions and slower crumb firming kinetics on ageing., Authors gratefully acknowledge the financial support of the Consejo Superior de Investigaciones Científicas (CSIC), Ministerio de Economía y Competitividad (MINECO) and Fondo Europeo de Desarrollo Regional (MINECO/FEDER Project AGL2015-63849-C2-1-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Value-Added of Heat Moisture Treated Mixed Flours in Wheat-Based Matrices: a Functional and Nutritional Approach

  • Collar, Concha
  • Armero, Enrique
The significance of heat moisture treatment (HMT) of non-wheat teff (T), chestnut (CN), and chickpea (CP) flours on dough viscoelastic and thermal parameters and on the structural and nutritional pattern of breads was investigated in untreated (−) and HMT (+) associated wheat-based (WT) matrices (WT:T:CN:CP, 66.20:7:7, wt. basis). Suitable trends for the enhancement of the physical characteristics of breads in terms of larger specific volume, higher viscoelastic and textural profiles, with lower and slower staling kinetics on aging were achieved by the pairs T-CN+, T-CP+, CN-CP+, and CN + CP+. In addition, a fine and uniformly sized cell structure with similar cell wall thickness was achieved in crumb samples. The pair T-CN+ enhanced extracted bioaccessible polyphenols, and the pair CN + CP+ synergistically promoted the antiradical activity in breads. Blended breads can be labeled as high-fiber breads (≥ 6 g DF/100 g food), and a recommended daily consumption of 250 g of bread fulfilled from 44% (men) to 67% (women) of dietary fiber requirements., The authors acknowledge the Institutions Ministerio de Economía y Competitividad (MINECO) and Federación Europea de Desarrollo Regional (FEDER) for funding the Project AGL2015-63849-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Significance of heat-moisture treatment conditions on the pasting and gelling behaviour of various starch-rich cereal and pseudocereal flours

  • Collar, Concha
The impact of heat-moisture treatment processing conditions (15%, 25%, and 35% moisture content; 1, 3, and 5 h heating time at 120 ℃) on the viscosity pasting and gelling profiles of different grain flours matrices (barley, buckwheat, sorghum, high β-glucan barley, and wheat) was investigated by applying successive cooking and cooling cycles to rapid visco analyser canisters with highly hydrated samples (3.5:25, w:w). At a milder heat-moisture treatment conditions (15% moisture content, 1 h heating time), except for sorghum, heat-moisture treatment flours reached much higher viscosity values during earlier pasting and subsequent gelling than the corresponding native counterparts. Besides heat-moisture treatment wheat flour, the described behaviour found also for non-wheat-treated flours has not been previously reported in the literature. An increased hydrophobicity of prolamins and glutelins in low moisture-short heating time heat-moisture treatment of non-wheat flours with high protein content (12.92%–19.95%) could explain the enhanced viscosity profile observed., The authors acknowledge the institutions Ministerio de Economía y Competitividad (MINECO) and Federación Europea de Desarrollo Regional (FEDER) for funding the Project AGL2015-63849-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional and Thermal Behaviours of Heat-Moisture-Treated Starch-Rich Wheat-Based Blended Matrices: Impact of Treatment of Non-wheat Flours

  • Collar, Concha
  • Armero, Enrique
The significance of heat moisture treatment (HMT, 15% moisture content, 1 h and 120 °C) of single common wheat (WT), teff (T), chestnut (CN) and whole chickpea (CP) flours has been investigated (a) on main chemical, nutritional and functional flour parameters and (b) on visco-metric and thermal behaviours of treated blended breads. Characterization of native and HMT flours evidenced significant (p < 0.05) but discreet effects of the thermal treatment of flours on main functional parameters in terms of promotion of the ability of the flour to associate with water and of the formation of water-soluble molecules from small fragments of amylopectin or amylose. Dilution of the basic wheat flour system by accumulative addition of T, CN and CP flours submitted to partial or total HMT did impact on the disorganization and later reorganization of starch components of the starch-rich blended matrices in excess of water (pasting, gelling) and under water restrictions (retrogradation kinetics). Simultaneous presence of T/CN, T/CP and CN/CP either singly or fully thermally treated provided enhancement of the visco-metric profile on pasting and gelling, and decreased the extent and the rate of amylopectin crystallization on ageing., The authors acknowledge the Institutions Ministerio de Economía y Competitividad (MINECO) and Federación Europea de Desarrollo Regional (FEDER) for funding the Project AGL2015-63849-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetics of in vitro starch hydrolysis and relevant starch nutritional fractions in heat-moisture treated blended wheat-based bread matrices: impact of treatment of non-wheat flours

  • Collar, Concha
  • Armero, Enrique
Impact of wheat flour replacement at 34% by ternary blends of 20% teff (T), 7% chestnut (CN) and 7% chickpea flours (CP) used native and submitted to heat moisture treatment (HMT) on in vitro starch digestibility were investigated in breads thereof. During the early stages of hydrolysis (0–60 min), HMT breads were hydrolyzed to a smaller extent than their native counterparts depending on the flour. All samples practically reached the plateau after 120 min and approached the equilibrium percentage of starch hydrolysed C∞ to an extent higher than 99.5% in all cases. Higher and delayed resistance towards the action of digestive enzymes was provided by CP flour on HMT when incorporated to bread formulations. The lowest value for hydrolysis index corresponded to samples with thermally treated T and CP flours that reached the lowest equilibrium percentage of starch hydrolyzed C∞, and hence leading to the lowest expected glycaemic index. Maximum formation of slowly digestible starch was achieved in breads with thermally treated T and native CP flours., The authors acknowledge the Institutions Ministerio de Economía y Competitividad (MINECO) and Federación Europea de Desarrollo Regional (FEDER) for funding the Project AGL2015-63849-C2-1-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of acidification and protein fortification on rheological and thermal properties of wheat, corn, potato and tapioca starch-based gluten-free bread doughs

  • Villanueva, Marina
  • Pérez-Quirce, Sandra
  • Collar, Concha
  • Ronda, Felicidad
The study of new gluten-free (GF) foods is necessary since consumers intolerant to gluten are more and more frequently diagnosed. The study evaluated the impact of acidification -with acetic + lactic blend at 0.5 g/100 g level- and protein fortification -with caseinate (CA) or soy-protein isolate (SPI)- on the rheological features of wheat, corn, potato and tapioca starch-based bread doughs. Oscillatory and creep-recovery tests were carried out to characterise their viscoelastic behaviour, and thermomechanical tests were performed to assess their visco-metric performance. Dough stickiness was also measured. The acid blend had a modulator effect on dough rheological properties that depended on both the type of protein and the source of the starch. Proteins structured and strengthened the doughs especially those made with SPI-potato starch and CA-wheat starch mixtures. Acidification decreased G′ and G″ moduli until 70% with respect to unacidified doughs. The effect was much more marked in protein-fortified doughs. A significant increase in all pasting viscosities was observed with protein addition, particularly in the case of CA. In general, protein addition decreased dough stickiness whereas the opposite effect was noted with the presence of acid. Acidification of protein-enriched starch matrices modulate dough rheological properties which are of relevance in GF products development., The authors thank the financial support of the Ministerio de Economía y Competitividad and the European Regional Development Fund (FEDER) (AGL2015-63849-C2-1-R and AGL2015-63849-C2-2-R) and Consejeria de Education (Junta de Castilla y Leon)/FEDER (Project VA072P17). Marina Villanueva thanks the Junta de Castilla y León for her doctorate grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lipid composition and dynamics during breadmaking in heat-moisture-treated associated matrices

  • Collar, Concha
  • Armero, Enrique
The use of fruits, legumes, and ancient grains for bread-making applications is receiving particular attention, since they involve nutrient dense grains with proven health-promoting attributes. Dilution by 34% of the basic wheat flour matrix by accumulative ternary addition of heat-moisture-treated teff, chestnut, and chickpea flours did significantly impact both the extractability and the distribution of lipid subfractions in composite flours, doughs, and breads, and induced dynamics in lipid binding over mixing, fermentation, and baking steps. A preferential covalent lipid binding to the inside part of the starch granules takes place sequentially during bread-making steps at the expenses of both accessible free lipids and lipids initially bound non-covalently to the gluten/non-gluten proteins and to the outside part of the starch granules. Larger accumulation of starch lipids over mixing encompassed smaller extent of starch hydrolysis in fresh breads and smaller slowly digestible starch formation, while higher increase of starch lipids after fermentation and baking led to a bigger extent of starch digestibility and to a more prominent formation of slowly digestible starch fraction but to lower volume in fresh breads. Extensive binding of either protein bounded lipids or free lipids over fermentation and baking provided breads with promoted specific volume and anti-radical activity and slower retrogradation kinetics on ageing, respectively., The authors acknowledge the Institutions Ministerio de Economía y Competitividad (MINECO) and Federación Europea de Desarrollo Regional (FEDER) for funding the Project AGL2015-63849-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structuring Diluted Wheat Matrices: Impact of Heat-Moisture Treatment on Protein Aggregation and Viscoelasticity of Hydrated Composite Flours

  • Collar, Concha
  • Villanueva, Marina
  • Ronda, Felicidad
This is a post-peer-review, pre-copyedit version of an article published in Food and Bioprocess Technology. The final authenticated version is available online at: https://doi.org/10.1007/s11947-020-02406-z, The influence of heat-moisture treatment (HMT) and flour hydration (DY) on the restoration of dough viscoelasticity of wheat/non-wheat binary matrices was investigated by applying fundamental and empirical rheological procedures, and the protein structural reorganization was monitored by measuring residual protein solubility in different media, and by assessing the accessibility of thiol groups inside the protein network. Single chestnut (CN), chickpea (CP), millet (MI), and teff (T) flour samples submitted to HMT (15% moisture content, 1 h and 120 °C) were blended with wheat flour at 10% (CN, CP) and 30% (MI, T) of replacement, and binary matrices hydrated at low (L), medium (M), and high (H) DY. Structuring ability of HMT was mainly observed in cereal flour blends (T, MI), where higher elastic moduli and lower loss tangent together with solid-like elastic structure over higher shear stress were observed as compared with treated non-cereal flour blends (CN, CP). Increased flour hydration significantly weakened blends structure, inducing a stepped decrease in dynamic moduli values particularly noticed in cereal blends at highest level of flour hydration, and a shift from elastic-like to viscous-like structure at lower shear stress in non-wheat cereal matrices. The formation of a protein network with reinforced compact structure associated to the presence or formation of intramolecular (CN, CP, T) and intermolecular disulphide bonds (CN, CP, MI, T), water-soluble (CN, MI) and water-insoluble aggregates (CP, T) is feasible to achieve with proteins of non-wheat flours submitted to HMT, particularly in high DY doughs. The lower the amount of free thiols in high molecular weight proteins encompassing high degree of crosslinking, corresponded to thermally treated samples (T, MI) blended at L and M hydration levels. For thermally treated samples, the lower the amount of free thiols in high molecular weight proteins encompassing high degree of crosslinking, corresponded to T and MI binary matrices blended at L and M hydration levels. These samples exhibited a solid-like elastic structure over higher shear stress and showed increased tolerance to stress/strain before losing the structure., This study is financially supported by the Institutions Ministerio de Economía y Competitividad (MINECO) and Federación Europea de Desarrollo Regional (FEDER) through the Projects AGL2015-63849-C2-1-R and AGL2015-63849-C2-2-R, and the Junta de Castilla y León/FEDER VA072P17., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tef [Eragrostis tef (Zucc.) Trotter] variety determines viscoelastic and thermal properties of gluten-free dough and bread quality

  • Villanueva, Marina
  • Abebe, Workineh
  • Collar, Concha
  • Ronda, Felicidad
Tef flour has been considered a good alternative raw material to improve the quality of gluten-free bread due to its attractive nutritional profile. The influence of tef variety (DZ-Cr-37, DZ-Cr-387 and DZ-01-99) and incorporation level (100, 75 and 50%) on rheological and thermal properties of maize starch-based gluten-free doughs, and their impact on bread characteristics was investigated. The addition of tef brought about a structuring effect of doughs leading to higher viscoelastic moduli and steady-state viscosities and to lower tan δ values and instantaneous and retarded compliances. These effects were magnified with the increase of tef level in the dough. Tef addition led to an increase in dough gelatinization temperature and a decrease of gelatinization enthalpy, especially in the case of DZ-01-99 variety. Tef incorporation at 50 and 75% level led to well-developed bread which volume and crumb grain properties were significantly affected by the tef variety. DZ-Cr-37 variety led to the highest bread volume but to a less regular and poorer crumb grain. However, the bread made with 100% DZ-Cr-37 reached the highest overall acceptance score. This work demonstrates tef flour incorporation up to 100% level is a feasible procedure to reach technologically viable and sensory acceptable gluten-free bread., financial support of the Spanish Ministerio de Economía y Competitividad and the European Regional Development Fund (AGL2015-63849-C2-2-R and AGL2015-63849-C2-1-R), the Spanish Ministerio de Ciencia e Innovación (PID2019-110809RB-I00) and the Junta de Castilla y León/FEDER VA072P17., Peer reviewed