Pasar al contenido principal

DISEÑO, DESARROLLO Y EVALUACION DE SISTEMAS AUTONOMOS PARA LA INSPECCION TERRESTRE EFECTIVA Y LA ACTUACION PRECISA EN CULTIVOS EXTENSIVOS Y LEÑOSOS

AGL2017-83325-C4-3-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-Ground Vineyard Reconstruction Using a LiDAR-Based Automated System

  • Moreno, Hugo
  • Valero, Constantino
  • Bengochea-Guevara, José M.
  • Ribeiro Seijas, Ángela
  • Garrido-Izard, Miguel
  • Andújar, Dionisio
© 2020 by the authors., Crop 3D modeling allows site-specific management at different crop stages. In recent years, light detection and ranging (LiDAR) sensors have been widely used for gathering information about plant architecture to extract biophysical parameters for decision-making programs. The study reconstructed vineyard crops using light detection and ranging (LiDAR) technology. Its accuracy and performance were assessed for vineyard crop characterization using distance measurements, aiming to obtain a 3D reconstruction. A LiDAR sensor was installed on-board a mobile platform equipped with an RTK-GNSS receiver for crop 2D scanning. The LiDAR system consisted of a 2D time-of-flight sensor, a gimbal connecting the device to the structure, and an RTK-GPS to record the sensor data position. The LiDAR sensor was facing downwards installed on-board an electric platform. It scans in planes perpendicular to the travel direction. Measurements of distance between the LiDAR and the vineyards had a high spatial resolution, providing high-density 3D point clouds. The 3D point cloud was obtained containing all the points where the laser beam impacted. The fusion of LiDAR impacts and the positions of each associated to the RTK-GPS allowed the creation of the 3D structure. Although point clouds were already filtered, discarding points out of the study area, the branch volume cannot be directly calculated, since it turns into a 3D solid cluster that encloses a volume. To obtain the 3D object surface, and therefore to be able to calculate the volume enclosed by this surface, a suitable alpha shape was generated as an outline that envelops the outer points of the point cloud. The 3D scenes were obtained during the winter season when only branches were present and defoliated. The models were used to extract information related to height and branch volume. These models might be used for automatic pruning or relating this parameter to evaluate the future yield at each location. The 3D map was correlated with ground truth, which was manually determined, pruning the remaining weight. The number of scans by LiDAR influenced the relationship with the actual biomass measurements and had a significant effect on the treatments. A positive linear fit was obtained for the comparison between actual dry biomass and LiDAR volume. The influence of individual treatments was of low significance. The results showed strong correlations with actual values of biomass and volume with R2 = 0.75, and when comparing LiDAR scans with weight, the R2 rose up to 0.85. The obtained values show that this LiDAR technique is also valid for branch reconstruction with great advantages over other types of non-contact ranging sensors, regarding a high sampling resolution and high sampling rates. Even narrow branches were properly detected, which demonstrates the accuracy of the system working on difficult scenarios such as defoliated crops., This research was funded by the RYC-2016-20355 agreement and by the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) (AGL2017-83325-C4-3-R). The research leading to these results has received funding from RoboCity2030-DIH-CM Madrid Robotics Digital Innovation Hub (“Robótica aplicada a la mejora de la calidadde vida de los ciudadanos. fase IV”; S2018/NMT-4331), funded by “Programas de Actividades I + D en la Comunidad de Madrid” and cofunded by Structural Funds of the EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aerial imagery or on-ground detection? An economic analysis for vineyard crops

  • Andújar, Dionisio
  • Moreno, Hugo
  • Bengochea-Guevara, José M.
  • Castro, Ana Isabel de
  • Ribeiro Seijas, Ángela
Aerial and on-ground vegetation characterization technologies are continuously evolving. An experiment was conducted in a vineyard field in order to test the economic feasibility of applying fertilizers site specifically based on different mapping systems. The capacity of UAV missions and on-ground systems has been compared using depth cameras or LiDAR systems respectively in order to provide the necessary vineyard volume maps for specific applications like fertilization. Aerial imagery was obtained using a UAV equipped with a high-resolution RGB camera, and a digital surface model was reconstructed using photogrammetry procedures. On-ground crop reconstruction was performed using LiDAR-based measurements taken with an RTK-GNSS along the crop rows. Furthermore, a Kinect v2 sensor was also used as a low cost depth camera. All systems were tested in a commercial field, under sunlight conditions. Every technique provided a 3D dense point cloud from which volume was calculated. The results showed that volume values were always consistent and similar between the studied systems. The on-ground techniques provided the best details of the plants. However, the cost of acquisition was always higher than that of aerial imagery. Concerning the fertiliser application it should be noted that, the changes in shape and size of plants obtained within the vineyard indicate that continuous adjustment of the applied dose would be required to optimize the performed application. When using site-specific spraying based on the created maps, the dose was reduced by up to 80% of the total dosage used with a conventional application. A detailed analysis of savings indicates differences between the systems. The use of aerial imagery techniques resulted in positive net returns, whereas the on-ground technologies needed a faster time of acquisition in order of them to be profitable. Regarding efficacy, no significant differences between applications based on the constructed maps were found. This important reduction in fertilizer application could be followed by an equivalent reduction in plant protection products (e.g., fungicides). Thus, the use of some 3D characterization technologies has shown to be profitable at the current stage of development while also reducing the inputs and the environmental impact of agricultural tasks., This research was partly funded by the AGL2013-48297-C2-2-R, and AGL2017-83325-C4-3-R projects (Spanish Ministry of Economy and Competitiveness) and by the RYC-2016-20355 agreement., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparing UAV-Based Technologies and RGB-D Reconstruction Methods for Plant Height and Biomass Monitoring on Grass Ley

  • Rueda-Ayala, V. P.
  • Peña, J. M.
  • Höglind, M.
  • Bengochea-Guevara, José M.
  • Andújar, Dionisio
Pastures are botanically diverse and difficult to characterize. Digital modeling of pasture biomass and quality by non-destructive methods can provide highly valuable support for decision-making. This study aimed to evaluate aerial and on-ground methods to characterize grass ley fields, estimating plant height, biomass and volume, using digital grass models. Two fields were sampled, one timothy-dominant and the other ryegrass-dominant. Both sensing systems allowed estimation of biomass, volume and plant height, which were compared with ground truth, also taking into consideration basic economical aspects. To obtain ground-truth data for validation, 10 plots of 1 m² were manually and destructively sampled on each field. The studied systems differed in data resolution, thus in estimation capability. There was a reasonably good agreement between the UAV-based, the RGB-D-based estimates and the manual height measurements on both fields. RGB-D-based estimation correlated well with ground truth of plant height ( R 2 > 0.80 ) for both fields, and with dry biomass ( R 2 = 0.88 ), only for the timothy field. RGB-D-based estimation of plant volume for ryegrass showed a high agreement ( R 2 = 0.87 ). The UAV-based system showed a weaker estimation capability for plant height and dry biomass ( R 2 < 0.6 ). UAV-systems are more affordable, easier to operate and can cover a larger surface. On-ground techniques with RGB-D cameras can produce highly detailed models, but with more variable results than UAV-based models. On-ground RGB-D data can be effectively analysed with open source software, which is a cost reduction advantage, compared with aerial image analysis. Since the resolution for agricultural operations does not need fine identification the end-details of the grass plants, the use of aerial platforms could result a better option in grasslands., This research was funded by the projects AGL2017-83325-C4-1-R and AGL2017-83325-C4-3-R (Spanish Ministry of Economy and Competition); the RYC-2016-20355 agreement, Spain, as well as, by the Norwegian research funding for agriculture and the food industry (NRF), project 255245 (FOREFF) and the Department of Grassland and Livestock, NIBIO, Norway.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-Cost Three-Dimensional Modeling of Crop Plants

  • Martínez-Guanter, Jorge
  • Ribeiro Seijas, Ángela
  • Peteinatos, Gerassimos G.
  • Pérez Ruiz, Manuel
  • Gerhards, Roland
  • Bengochea-Guevara, José M.
  • Machleb, Jannis
  • Andújar, Dionisio
Plant modeling can provide a more detailed overview regarding the basis of plant development throughout the life cycle. Three-dimensional processing algorithms are rapidly expanding in plant phenotyping programmes and in decision-making for agronomic management. Several methods have already been tested, but for practical implementations the trade-off between equipment cost, computational resources needed and the fidelity and accuracy in the reconstruction of the end-details needs to be assessed and quantified. This study examined the suitability of two low-cost systems for plant reconstruction. A low-cost Structure from Motion (SfM) technique was used to create 3D models for plant crop reconstruction. In the second method, an acquisition and reconstruction algorithm using an RGB-Depth Kinect v2 sensor was tested following a similar image acquisition procedure. The information was processed to create a dense point cloud, which allowed the creation of a 3D-polygon mesh representing every scanned plant. The selected crop plants corresponded to three different crops (maize, sugar beet and sunflower) that have structural and biological differences. The parameters measured from the model were validated with ground truth data of plant height, leaf area index and plant dry biomass using regression methods. The results showed strong consistency with good correlations between the calculated values in the models and the ground truth information. Although, the values obtained were always accurately estimated, differences between the methods and among the crops were found. The SfM method showed a slightly better result with regard to the reconstruction the end-details and the accuracy of the height estimation. Although the use of the processing algorithm is relatively fast, the use of RGB-D information is faster during the creation of the 3D models. Thus, both methods demonstrated robust results and provided great potential for use in both for indoor and outdoor scenarios. Consequently, these low-cost systems for 3D modeling are suitable for several situations where there is a need for model generation and also provide a favourable time-cost relationship., This research was partly funded by the Ramon y Cajal RYC-2016-20355, AGL2017-83325-C4-3-R and AGL2017-83325-C4-1-R, and José Castillejo CAS18/00123 projects (Spanish Ministry of Economy and Competitiveness). The research leading to these results has received funding from RoboCity2030-DIH-CM Madrid Robotics Digital Innovation Hub (“Robótica aplicada a la mejora de la calidad de vida de los ciudadanos. fase IV”; S2018/NMT-4331), funded by “Programas de Actividades I + D en la Comunidad de Madrid” and cofunded by Structural Funds of the EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of Vineyard Cropping Systems Using On-Board RGB-Depth Perception

  • Moreno, Hugo
  • Rueda-Ayala, Víctor
  • Ribeiro Seijas, Ángela
  • Bengochea-Guevara, José M.
  • López, Juan
  • Peteinatos, Gerassimos G.
  • Valero, Constantino
  • Andújar, Dionisio
A non-destructive measuring technique was applied to test major vine geometric traits on measurements collected by a contactless sensor. Three-dimensional optical sensors have evolved over the past decade, and these advancements may be useful in improving phenomics technologies for other crops, such as woody perennials. Red, green and blue-depth (RGB-D) cameras, namely Microsoft Kinect, have a significant influence on recent computer vision and robotics research. In this experiment an adaptable mobile platform was used for the acquisition of depth images for the non-destructive assessment of branch volume (pruning weight) and related to grape yield in vineyard crops. Vineyard yield prediction provides useful insights about the anticipated yield to the winegrower, guiding strategic decisions to accomplish optimal quantity and efficiency, and supporting the winegrower with decision-making. A Kinect v2 system on-board to an on-ground electric vehicle was capable of producing precise 3D point clouds of vine rows under six different management cropping systems. The generated models demonstrated strong consistency between 3D images and vine structures from the actual physical parameters when average values were calculated. Correlations of Kinect branch volume with pruning weight (dry biomass) resulted in high coefficients of determination (R2 = 0.80). In the study of vineyard yield correlations, the measured volume was found to have a good power law relationship (R2 = 0.87). However due to low capability of most depth cameras to properly build 3-D shapes of small details the results for each treatment when calculated separately were not consistent. Nonetheless, Kinect v2 has a tremendous potential as a 3D sensor in agricultural applications for proximal sensing operations, benefiting from its high frame rate, low price in comparison with other depth cameras, and high robustness., This research was funded by the RYC-2016-20355 agreement and by the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) (AGL2017-83325-C4-3-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An Autonomous Guided Field Inspection Vehicle for 3D Woody Crops Monitoring

  • Bengochea-Guevara, José M.
  • Andújar, Dionisio
  • Cantuña, Karla
  • Garijo-Del-Río, Celia
  • Ribeiro Seijas, Ángela
This paper presents a novel approach for crop monitoring and 3D reconstruction. A mobile platform, based on a commercial electric vehicle, was developed and equipped with different on-board sensors for crop monitoring. Acceleration, braking and steering systems of the vehicle were automatized. Fuzzy control systems were implemented to achieve autonomous navigation. A low-cost RGB-D sensor, Microsoft Kinect v2 sensor, and a reflex camera were installed on-board the platform for creation of 3D crop maps. The modelling of the field was fully automatic based on algorithms for 3D reconstructions of large areas, such as a complete row crop. Important information can be estimated from a 3D model of the crop, such as the canopy volume. For that goal, the alpha-shape algorithm was proposed. The on-going developments presented in this paper arise as a promising tool to achieve better crop management increasing crop profitability while reducing agrochemical inputs and environmental impact., This work was financed by the Spanish Ministerio de Economía y Competitividad (AGL2014-52465-C4-3-R) and the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) (AGL2017-83325-C4-1-R and AGL2017-83325-C4-3-R). Karla Cantuña thanks the service commission for the remuneration given by the Cotopaxi Technical University. The authors also wish to acknowledge the ongoing technical support of Damián Rodríguez., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

An automatic segmentation method based on geometrical features in hemispherical images for forest management

  • Herrera, P. J.
  • Montes, Fernando
  • Pajares, Gonzalo
  • Cerrada, Carlos
This work presents an automatic pixel-based approach for image segmentation in hemispherical images obtained by a stereoscopic imaging device with fish-eye lenses for forest inventories purposes. In this way, the objective of the proposed image segmentation process is the identification of tree stems. To that end, four geometrical features were obtained for each pixel taken into account the intensity, the local color variance in both radial and tangential directions, and the greenness ratio. Thus, the proposed approach is an automated method based on a global image classification based on the four aforementioned features followed by a constrained region growing process. As a result, each pixel is classified as belonging to Sky, Foliage and Stem texture classes. The quality of the segmented images was successfully evaluated against two segmentation strategies previously used for similar purposes, by using three well-known image quality metrics: Peak Signal-to-Noise Ratio (PSNR), Structural Similarity Index (SSIM), and Feature Similarity Index Metric (FSIM). The results obtained in this work confirm the relevance of this automatic proposal., This work has been developed with the help of the research projects 2018-056-UNED-PROY within the Plan for the Promotion of Research, Internationalization and Knowledge Transfer (PPITIC) of the UNED; DPI2016-77677-P and AGL2017-83325-C4-3-R of the Spanish Ministry of Economy and Competitiveness. It also belongs to the activities carried out within the framework of RoboCity2030-DIH-CM Madrid Robotics Digital Innovation Hub (S2018/NMT-4331), funded by “Programas de Actividades I+D en la Comunidad de Madrid” and cofunded by Structural Funds of the EU., Peer reviewed