Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

To ferment or not to ferment? Evaluating the impact of pre-fermentation of cheese whey permeate on microbial protein production with designed synthetic communities

  • Demoltié, Brecht
  • Regueira López, Alberte
  • Weber, Heleen De
  • Ganigué, Ramon
  • Sakarika, Myrsini
Cheese whey permeate (CWP) is an abundant yet underutilized side stream of the dairy industry, commonly directed towards low-value applications. Being rich in carbon and nutrients, it offers a promising substrate for microbial protein (MP) production, enabling resource recovery and reducing its environmental impact. However, its composition is highly variable due to production and storage conditions—especially in lactose (40–60 g/L) and lactic acid (0–15 g/L) levels—compromising process stability, biomass yields, and nutritional quality during MP production. To address these challenges, this study explored (1) the design of two- to four-member synthetic microbial communities capable of co-utilizing lactose and lactic acid, and (2) the impact of partial or full CWP pre-fermentation on MP yields, nutrient uptake, and protein quality. High-throughput screening identified consortia’s that outperformed pure cultures, achieving up to 108 % higher protein concentrations and 152 % higher optical densities. The four-member community emerged as the most robust across both lactose-rich and lactic acid-rich substrates. Validation in stirred tank reactors confirmed that CWP pre-fermentation improved biomass yields by 21.7–59.0 % and protein contents by 23.3–58.7 %. Consumption efficiencies for chemical oxygen demand, nitrogen, and phosphorus reached 97.0 %, 41.1 %, and 86.6 %, respectively. Nevertheless, MP from unfermented CWP exhibited a higher amino acid score (0.92) compared to that of fermented CWP (0.79). This study highlights the importance of substrate standardization and tailored microbial community selection for optimizing MP production from dairy side streams.
Docta Complutense
Publicación Artículo científico (JournalArticle)

miniTRASGO: design and initial results of a compact resistive plate chamber telescope for worldwide cosmic ray monitoring

  • Soneira-Landín, C.
  • Blanco, A.
  • Fraile Prieto, Luis Mario
  • Garzón, J.A.
  • Kornakov, G.
  • Lopes, L.
  • Michel, J.
  • Martínez Nouvilas, Víctor
  • Udías Moinelo, José Manuel
Cosmic rays, composed primarily of high-energy protons and atomic nuclei, interact with Earth’s atmosphere, generating secondary particles that can be detected at ground level. Understanding these interactions requires precise measurements across various geomagnetic and atmospheric conditions. To address this challenge, miniTRASGO is introduced: a cost-effective and portable cosmic ray detector based on Resistive Plate Chambers, designed for worldwide deployment. This study describes the miniTRASGO system, including its design, data acquisition, and calibration processes. The detector measures charged secondary cosmic rays, reconstructs particle trajectories, and accounts for environmental influences such as pressure and temperature. Performance evaluations indicate an angular precision better than and an efficiency of approximately 95 %. The first operational miniTRASGO stations, deployed in Madrid (Spain), Warsaw (Poland), Puebla, and Monterrey (Mexico), allow for multi-site monitoring of cosmic ray flux. A Forbush Decrease event observed in March 2024 by the Madrid station validates the detector’s capability for space weather studies. The results highlight the potential of miniTRASGO to contribute to global cosmic ray monitoring, improving the characterization of cosmic ray variations and their implications for space weather.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Comparison between broadband and personal exposimeter measurements for EMF exposure map development using evolutionary programming

  • Nájera López, Alberto
  • Sánchez Montero, Rocío|||0000-0002-3135-8828
  • González Rubio, Jesús
  • Guillén Pina, Jorge|||0000-0003-2153-5656
  • Chocano del Cerro, Ricardo
  • López Espí, Pablo Luis|||0000-0003-3750-255X
In this study, we provide a comparison of radiofrequency electromagnetic field exposure level maps as determined using two approaches: a broadband meter (NARDA EMR-300) equipped with an isotropic probe in the range of 100 kHz to 3 GHz, and a Personal Exposimeter (Satimo EME Spy 140) in the range of 88 MHz to 5.8 GHz. The aim of this research was to determine the necessary adjustments to the measurements made with personal exposimeters to obtain RF-EMF exposure maps equivalent to those made with broadband meters. We evaluated different possibilities to obtain the best equivalence of measurements between both devices. For this purpose, the datasets obtained in both cases were analyzed, as well as the possible correction factors. First, the possibility of establishing a single or double correction factor depending on the existence (or lack thereof) of a line of sight with respect to the base stations was analyzed by minimizing the average value of the error between the values of the broadband meter and the corrected values of the personal exposure meter. Due to the differences observed in the exposure maps, a second procedure was carried out, in which a genetic algorithm was used to determine the ratio between the measurements from both methods (the broadband meter and personal exposure meter), depending on the existence (or lack thereof) of a line of sight, and we compared the exposure maps generated using kriging interpolation., Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Efficient design of electromagnetic field exposure maps with multi-method evolutionary ensembles

  • Guillén Pina, Jorge|||0000-0003-2153-5656
  • Pérez Aracil, Jorge|||0000-0002-4456-9886
  • Chocano del Cerro, Ricardo
  • Sánchez Montero, Rocío|||0000-0002-3135-8828
  • López Espí, Pablo Luis|||0000-0003-3750-255X
  • Salcedo Sanz, Sancho|||0000-0002-4048-1676
Radio-frequency electromagnetic field (EMF) exposure is a growing concern among the population. This concern has led to a need for practical tools to contribute to an adequate risk perception. Representing spatial variations af-ter measurements from fixed sites and interpolating using different techniques is the most suitable method for obtaining EMF high-quality exposure maps. This paper uses evolutionary computation to obtain the optimal set of points to construct high-quality electromagnetic field exposure maps (minimizing an error measure with respect to a reference exposure map). A multi-method en-semble evolutionary approach, able to combine different search operators in a single population (PCRO-SL), is introduced for this particular problem, and it has been tested over actual measurements at Meco town, Madrid, Spain, obtaining good quality electromagnetic field exposure map reconstructions in terms of the differences with a reference EMF exposure map. The results obtained show that reducing the number of measurement points necessary to obtain significant exposure maps, while maintaining their representativeness, is possible., Comunidad de Madrid, Universidad de Alcalá, Ministerio de Ciencia, Innovación y Universidades