Pasar al contenido principal

DISEÑO DE UN VEHICULO DE INSPECCION SUBMARINA AUTONOMA PARA MISIONES OCEANOGRAFICAS: GRUPO DE INVESTIGACION IDF-UPV

BES-2010-038486

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Formación de Recursos Humanos de Investigación
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Contratos Predoctorales
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Formación e Incorporación de Investigadores
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robust auto tool change for industrial robots using visual servoing

  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Solanes, J. Ernesto|||0000-0001-5011-4872
  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
[EN] This work presents an automated solution for tool changing in industrial robots using visual servoing and sliding mode control. The robustness of the proposed method is due to the control law of the visual servoing, which uses the information acquired by a vision system to close a feedback control loop. Furthermore, sliding mode control is simultaneously used in a prioritised level to satisfy the constraints typically present in a robot system: joint range limits, maximum joint speeds and allowed workspace. Thus, the global control accurately places the tool in the warehouse, but satisfying the robot constraints. The feasibility and effectiveness of the proposed approach is substantiated by simulation results for a complex 3D case study. Moreover, real experimentation with a 6R industrial manipulator is also presented to demonstrate the applicability of the method for tool changing., This work was supported in part by the Ministerio de Economia, Industria y Competitividad, Gobierno de Espana under Grant BES-2010-038486 and Project DPI2017-87656-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sliding mode control for robust and smooth reference tracking in robot visual servoing

  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Solanes, J. Ernesto|||0000-0001-5011-4872
  • Esparza Peidro, Alicia|||0000-0002-7471-8686
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
[EN] An approach based on sliding mode is proposed in this work for reference tracking in robot visual servoing. In particular, 2 sliding mode controls are obtained depending on whether joint accelerations or joint jerks are considered as the discontinuous control action. Both sliding mode controls are extensively compared in a 3D-simulated environment with their equivalent well-known continuous controls, which can be found in the literature, to highlight their similarities and differences. The main advantages of the proposed method are smoothness, robustness, and low computational cost. The applicability and robustness of the proposed approach are substantiated by experimental results using a conventional 6R industrial manipulator (KUKA KR 6 R900 sixx [AGILUS]) for positioning and tracking tasks., Spanish Government, Grant/Award Number: BES-2010-038486; Generalitat Valenciana, Grant/Award Number: BEST/2017/029 and APOSTD/2016/044
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robust fulfillment of constraints in robot visual servoing

  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Solanes, J. Ernesto|||0000-0001-5011-4872
  • Esparza Peidro, Alicia|||0000-0002-7471-8686
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
[EN] In this work, an approach based on sliding mode ideas is proposed to satisfy constraints in robot visual servoing. In particular, different types of constraints are defined in order to: fulfill the visibility constraints (camera fieldof-view and occlusions) for the image features of the detected object; to avoid exceeding the joint range limits and maximum joint speeds; and to avoid forbidden areas in the robot workspace. Moreover, another task with low-priority is considered to track the target object. The main advantages of the proposed approach are low computational cost, robustness and fully utilization of the allowed space for the constraints. The applicability and effectiveness of the proposed approach is demonstrated by simulation results for a simple 2D case and a complex 3D case study. Furthermore, the feasibility and robustness of the proposed approach is substantiated by experimental results using a conventional 6R industrial manipulator., This work was supported in part by the Spanish Government under grants BES-2010-038486 and Project DPI2013-42302-R, and the Generalitat Valenciana under grants VALi+d APOSTD/2016/044 and BEST/2017/029.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

PWM and PFM for visual servoing in fully decoupled approaches

  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Solanes, J. Ernesto|||0000-0001-5011-4872
  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
In this paper, novel visual servoing techniques based on Pulse Width Modulation (PWM) and Pulse Frequency Modulation (PFM) are presented. In order to apply previous pulse modulations, a fully decoupled position based visual servoing approach (i.e. with block-diagonal interaction matrix) is considered, controlling independently translational and rotational camera motions. These techniques, working at high frequency, could be considered to address the sensor latency problem inherent in visual servoing systems. The expected appearance of ripple due to the concentration of the control action in pulses is quantified and analyzed under simulated scenario. This high frequency ripple does not affect the system performance since it is filtered by the manipulator dynamics. On the contrary it can be seen as a dither signal to minimize the impact of friction and overcome back-lashing., This work was supported in part by the Spanish Government under Grant BES-2010-038486 and Project DPI2013-42302-R.