Pasar al contenido principal

PROCESOS MAS EFICIENTES EN CATALISIS Y ALMACENAMIENTO DE ENERGIA MEDIANTE LA SINTESIS DE NUEVOS RECUBRIMIENTOS Y RELLENOS

BES-2013-063678

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

K- and Ca-promoted ferrosilicates for the gas-phase epoxidation of propylene with O2

  • García Aguilar, Jaime
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
In the propylene epoxidation reaction with Fe-SiO2 catalysts the presence of iron oxide particles has a detrimental effect due to the total combustion of propylene on these iron species. Thus, the complete elimination of the iron oxide particles is presented as a preliminary strategy in order to increase the selectivity towards propylene oxide in iron-based catalysts. In this sense, a simple post-treatment of the catalysts with alkali or alkaline-earth elements (such as K or Ca, respectively) has proven effective in the total elimination of these iron oxide particles. Furthermore, the addition of K and Ca has modified the physico-chemical properties of the catalysts, decreasing their superficial acidity and (for higher K or Ca loadings) masking/blocking the active sites responsible for the catalytic reaction. With all this, it is shown that K has a higher efficiency removing the iron oxide particles compared with Ca (for the same molar ratios) and that a higher amount of K (compared to Fe) is required for the complete elimination of the iron oxide particles. A considerable propylene oxide selectivity enhancement (up to 65%) has been obtained for the K-promoted Fe0.005SiO2 and Fe0.01SiO2 catalysts using O2 as sole oxidant.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Evolution of the PVP–Pd Surface Interaction in Nanoparticles through the Case Study of Formic Acid Decomposition

  • García Aguilar, Jaime
  • Navlani-García, Miriam
  • Berenguer-Murcia, Ángel
  • Mori, Kohsuke
  • Kuwahara, Yasutaka
  • Yamashita, Hiromi
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Palladium nanoparticles (Pd NPs) were synthesized by the reduction-by-solvent method using polyvinylpirrolidone (PVP) as capping agent. The nonstatic interaction between PVP and the metallic surface may change the properties of the NPs due to the different possible interactions, through either the O or N atoms of the PVP. In order to analyze these effects and their repercussions in their catalytic performance, Pd NPs with various PVP/Pd molar ratios (1, 10, and 20) were prepared, deposited on silica, and tested in the formic acid decomposition reaction. The catalytic tests were conducted using catalysts prepared by loading NPs with three different time lapses between their purification and their deposition on the silica support (1 day, 1 month, and 6 months). CO adsorption, FTIR spectroscopy, XPS, and TEM characterization were used to determine the accessibility of the Pd NPs surface sites, the electronic state of Pd, and the average NPs size, respectively. The H2 production from the formic acid decomposition reaction has a strong dependence on the Pd surface features, which in turn are related to the NPs aging time due to the progressive removal of the PVP.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Magnetic zeolites: novel nanoreactors through radiofrequency heating

  • García Aguilar, Jaime
  • Fernández-García, Javier
  • Rebrov, Evgeny V.
  • Lees, Martin Richard
  • Gao, Pengzhao
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
Many catalytic applications use conventional heating to increase the temperature to allow the desired reaction. A novel methodology is presented for the preparation of magnetic zeolite-based catalysts, allowing more efficient radiofrequency heating. These nanoreactors are tested in the isomerisation of citronellal with successful results and without any apparent deactivation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced ammonia-borane decomposition by synergistic catalysis using CoPd nanoparticles supported on titano-silicates

  • García Aguilar, Jaime
  • Navlani-García, Miriam
  • Berenguer-Murcia, Ángel
  • Mori, Kohsuke
  • Kuwahara, Yasutaka
  • Yamashita, Hiromi
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Pd and CoxPd1−x nanoparticles (NPs), synthesized using the reduction by solvent method, were loaded on SiO2 and Ti–SiO2 supports. The resulting catalysts were tested in the ammonia-borane decomposition reaction under dark and UV-vis conditions. The synergistic promotion by Co (in the NPs) and Ti (in the support), combined with the UV-vis light irradiation, enhanced the catalytic activity showing very promising TOFs values for this kind of catalysis, from 1.53 to 49.5 mol H2 per mol Pd per min.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Pd and Cu-Pd nanoparticles supported on multiwall carbon nanotubes for H2 detection

  • Navarro-Botella, Pascual
  • García Aguilar, Jaime
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
Simple, cost-effective, and reproducible devices have been prepared for the detection of H2 at room temperature. Pd, Cu and bimetallic Cu-Pd nanoparticles (prepared by the reduction-by-solvent method) have been loaded on a MWCNT deposit avoiding the use of surfactants or complicated techniques. The devices based on pure Pd nanoparticles have shown a high H2 sensitivity in the studied H2 concentration range with low response and recovery times. However, the addition of Cu in the metallic nanoparticles does not result in a considerable improvement. Furthermore, the Pd and Cu-Pd/MWCNTs-based sensors have kept part of their H2 sensitivity when they have been tested in an O2-depleted atmospheres, which is an altogether new finding compared to Pd-based systems. Through these experiments it has been possible to conclude how the main H2 detection mechanism is the electron transfer from the nanoparticles (when the PdHx is formed) to the carbon nanotubes.