Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modelling the energy harvesting from ceramic-based microbial fuel cells by using a fuzzy logic approach

  • De Ramón-Fernández, Alberto
  • Salar-García, María José
  • Ruiz-Fernandez, Daniel
  • Greenman, John
  • Ieropoulos, Ioannis
  • De Ramón-Fernández, Alberto|||/items/291c6806-fb6a-4bb7-8534-1a6907a08bec
  • Ruiz-Fernandez, Daniel|||/items/d64525ae-cea8-47fd-9b9f-6ae44b45e41e
Microbial fuel cells (MFCs) is a promising technology that is able to simultaneously produce bioenergy and treat wastewater. Their potential large-scale application is still limited by the need of optimising their power density. The aim of this study is to simulate the absolute power output by ceramic-based MFCs fed with human urine by using a fuzzy inference system in order to maximise the energy harvesting. For this purpose, membrane thickness, anode area and external resistance, were varied by running a 27-parameter combination in triplicate with a total number of 81 assays performed. Performance indices such as R2 and variance account for (VAF) were employed in order to compare the accuracy of the fuzzy inference system designed with that obtained by using nonlinear multivariable regression. R2 and VAF were calculated as 94.85% and 94.41% for the fuzzy inference system and 79.72% and 65.19% for the nonlinear multivariable regression model, respectively. As a result, these indices revealed that the prediction of the absolute power output by ceramic-based MFCs of the fuzzy-based systems is more reliable than the nonlinear multivariable regression approach. The analysis of the response surface obtained by the fuzzy inference system determines that the maximum absolute power output by the air-breathing set-up studied is 450 μW when the anode area ranged from 160 to 200 cm2, the external loading is approximately 900 Ω and a membrane thickness of 1.6 mm, taking into account that the results also confirm that the latter parameter does not show a significant effect on the power output in the range of values studied.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Neuroscience patient identification using big data and fuzzy logic–An Alzheimer’s disease case study

  • Munir, Kamran
  • De Ramón-Fernández, Alberto
  • Iqbal, Sohail
  • Javaid, Nadeem
  • De Ramón-Fernández, Alberto|||/items/291c6806-fb6a-4bb7-8534-1a6907a08bec
Modern neuroscience imaging technologies considerably affect diagnostic and prognostic accuracy and facilitate progress towards the cure of brain diseases. The benefits largely depend on the practicalities by which the large-scale imaging and clinical data can be integrated, examined and understood. In EU neuGRID4You (N4U) project, many datasets were generated from research centres and hospitals. In order to perform effective analyses, these datasets and their metadata along with a number of pre-computed parameters are stored in a big data repository. This paper focuses on the patient identification using big data and Fuzzy Logic, which has been achieved through fuzzy processing where a reference number called Alzheimers Disease Identification Number (ADIN) is calculated. It has enabled patients sorting for a particular intensity of Alzheimers disease, short-term estimation of the progression of that disease and context of individual patients with respect to other patients such as appropriate treatment, estimated life expectancy etc. The generated rules define the necessary knowledge base for the inference engine to generate output sets and an aggregate membership function of each rule is formed. Using this function, a most representative value of the total output set is obtained which represents the disease intensity. The implemented system and its evaluation are based on realistic datasets, demonstrators and making use of real-life neuroscience case studies. The presented results of four selected case studies show that this approach have provided sufficient expressiveness in understanding patients’ disease information. Finally, a discussion and conclusions are presented on the opportunities offered by the calculation of ADIN to manage Alzheimers disease along with potential future extensions or applications of this work.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Towards the optimisation of ceramic-based microbial fuel cells: A three-factor three-level response surface analysis design

  • Salar-García, María José
  • De Ramón-Fernández, Alberto
  • Ortiz-Martínez, Víctor Manuel
  • Ruiz-Fernandez, Daniel
  • Ieropoulos, Ioannis
  • De Ramón-Fernández, Alberto|||/items/291c6806-fb6a-4bb7-8534-1a6907a08bec
  • Ruiz-Fernandez, Daniel|||/items/d64525ae-cea8-47fd-9b9f-6ae44b45e41e
Microbial fuel cells (MFCs) are an environment-friendly technology, which addresses two of the most important environmental issues worldwide: fossil fuel depletion and water scarcity. Modelling is a useful tool that allows us to understand the behaviour of MFCs and predict their performance, yet the number of MFC models that could accurately inform a scale-up process, is low. In this work, a three-factor three-level Box–Behnken design is used to evaluate the influence of different operating parameters on the performance of air-breathing ceramic-based MFCs fed with human urine. The statistical analysis of the 45 tests run shows that both anode area and external resistance have more influence on the power output than membrane thickness, in the range studied. The theoretical optimal conditions were found at a membrane thickness of 1.55 mm, an external resistance of 895.59 Ω and an anode area of 165.72 cm2, corresponding to a maximum absolute power generation of 467.63 μW. The accuracy of the second order model obtained is 88.6%. Thus, the three-factor three-level Box–Behnken-based model designed is an effective tool which provides key information for the optimisation of the energy harvesting from MFC technology and saves time in terms of experimental work.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Support System for Early Diagnosis of Chronic Obstructive Pulmonary Disease Based on the Service-Oriented Architecture Paradigm and Business Process Management Strategy: Development and Usability Survey Among Patients and Health Care Providers

  • De Ramón-Fernández, Alberto
  • Ruiz-Fernandez, Daniel
  • Marcos-Jorquera, Diego
  • Gilart, Virgilio
  • De Ramón-Fernández, Alberto|||/items/291c6806-fb6a-4bb7-8534-1a6907a08bec
  • Gilart, Virgilio|||/items/101d9dc0-3c49-4c45-8788-0790a4bd5052
  • Marcos-Jorquera, Diego|||/items/2c3ce5b7-d5f7-4ac5-a499-b9a23904b744
  • Ruiz-Fernandez, Daniel|||/items/d64525ae-cea8-47fd-9b9f-6ae44b45e41e
Background: Chronic obstructive pulmonary disease (COPD) is a chronic respiratory disease with a high global prevalence. The main scientific societies dedicated to the management of this disease have published clinical practice guidelines for quality practice. However, at present, there are important weaknesses in COPD diagnosis criteria that often lead to underdiagnosis or misdiagnosis. Objective: We sought to develop a new support system for COPD diagnosis. The system was designed to overcome the weaknesses detected in current guidelines with the goals of enabling early diagnosis, and improving the diagnostic accuracy and quality of care provided. Methods: We first analyzed the main clinical guidelines for COPD to detect weaknesses that exist in the current diagnostic process, and then proposed a redesign based on a business process management (BPM) strategy for its optimization. The BPM system acts as a backbone throughout the process of COPD diagnosis in this proposed approach. The newly developed support system was integrated into a health information system for validation of its use in a hospital environment. The system was qualitatively evaluated by experts (n=12) and patients (n=36). Results: Among the 12 experts, 10 (83%) positively evaluated our system with respect to increasing the speed for making the diagnosis, helping in interpreting results, and encouraging opportunistic diagnosis. With an overall rating of 4.29 on a 5-point scale, 27/36 (75%) of patients considered that the system was very useful in providing a warning about possible cases of COPD. The overall assessment of the system was 4.53 on a 5-point Likert scale with agreement to extend its use to all primary care centers. Conclusions: The proposed system provides a functional method to overcome the weaknesses detected in the current diagnostic process for COPD, which can help foster early diagnosis, while improving the diagnostic accuracy and quality of care provided.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of iron oxide content and microstructural porosity on the performance of ceramic membranes as microbial fuel cell separators

  • Salar-García, María José
  • Walter, Xavier Alexis
  • Gurauskis, Jonas
  • De Ramón-Fernández, Alberto
  • Ieropoulos, Ioannis
  • De Ramón-Fernández, Alberto|||/items/291c6806-fb6a-4bb7-8534-1a6907a08bec
Ceramic materials based on naturally occurring clays are a low cost and environmentally friendly alternative to commercial polymer-based membranes in bioelectrochemical systems. In this work, ceramic membranes containing different amounts of iron oxide (1.06, 2.76 and 5.75 vol.%) and sintered at different temperatures (1100, 1200 and 1300 °C) have been elaborated and tested as separators in urine-fed microbial fuel cells (MFCs). The results reveal that the presence of iron oxide in the ceramic membrane composition increases the structural porosity and reduces the pore size for the three temperatures investigated. On the other hand, it was also observed that the iron content mitigates the negative effect of the high sintering temperature on the power performance of the MFCs. In the case of the ceramic membranes sintered at 1300 °C, power output improved ca. 10-fold when the iron oxide content in the membrane increased from 1.06 up to 5.75 vol.% (30.9 and 286.6 µW, respectively). Amongst the different combinations of iron phase content and sintering temperatures, the maximum power output was obtained by MFCs working with separators containing 5.75 vol. % of iron oxide and sintered at 1100 °C (1.045 mW). Finally, the system was stable for 65 days, which supports the long-term functionality of the different materials assessed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Application of the BPM Strategy to the Management of the COPD Clinical Process

  • De Ramón-Fernández, Alberto
  • Gilart, Virgilio
  • Ruiz-Fernandez, Daniel
  • Marcos-Jorquera, Diego
  • De Ramón-Fernández, Alberto|||/items/291c6806-fb6a-4bb7-8534-1a6907a08bec
  • Gilart, Virgilio|||/items/101d9dc0-3c49-4c45-8788-0790a4bd5052
  • Marcos-Jorquera, Diego|||/items/2c3ce5b7-d5f7-4ac5-a499-b9a23904b744
  • Ruiz-Fernandez, Daniel|||/items/d64525ae-cea8-47fd-9b9f-6ae44b45e41e
Chronic Obstructive Pulmonary Disease (COPD) is the third leading cause of death according to the World Health Organization (WHO). Like any chronic disease, the clinical process of COPD affects the patient’s life. Currently, clinical processes are inefficient, causing a loss of quality of life for patients and a high economic increase in the costs borne by family members, health systems and society. This paper presents a new approach to the redesign of the process for the management of COPD based on the use of the strategy of continuous improvement Business Process Management. This approach aims to improve the efficiency of the management of chronic diseases such as COPD, while achieving a higher quality of life and patient satisfaction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Evaluation of artificial neural network algorithms for predicting the effect of the urine flow rate on the power performance of microbial fuel cells

  • De Ramón-Fernández, Alberto
  • Salar-García, María José
  • Ruiz-Fernandez, Daniel
  • Greenman, John
  • Ieropoulos, Ioannis
  • De Ramón-Fernández, Alberto|||/items/291c6806-fb6a-4bb7-8534-1a6907a08bec
  • Ruiz-Fernandez, Daniel|||/items/d64525ae-cea8-47fd-9b9f-6ae44b45e41e
Microbial fuel cell (MFC) power performance strongly depends on the biofilm growth, which in turn is affected by the feed flow rate. In this work, an artificial neural network (ANN) approach has been used to simulate the effect of the flow rate on the power output by ceramic MFCs fed with neat human urine. To this aim, three different second-order algorithms were used to train our network and then compared in terms of prediction accuracy and convergence time: Quasi-Newton, Levenberg-Marquardt, and Conjugate Gradient. The results showed that the three training algorithms were able to accurately simulate power production. Amongst all of them, the Levenberg-Marquardt was the one that presented the highest accuracy (R = 95%) and the fastest convergence (7.8 s). These results show that ANNs are useful and reliable tools for predicting energy harvesting from ceramic-MFCs under changeable flow rate conditions, which will facilitate the practical deployment of this technology.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A decision support system for predicting the treatment of ectopic pregnancies

  • De Ramón-Fernández, Alberto
  • Ruiz-Fernandez, Daniel
  • Prieto Sánchez, María Teresa
  • De Ramón-Fernández, Alberto|||/items/291c6806-fb6a-4bb7-8534-1a6907a08bec
  • Ruiz-Fernandez, Daniel|||/items/d64525ae-cea8-47fd-9b9f-6ae44b45e41e
Background and objective: Ectopic pregnancy is an important cause of morbidity and mortality worldwide. An early diagnosis, as well as the choice of the most suitable treatment for the patient is crucial to avoid possible complications. According to different factors an ectopic pregnancy must be treated from surgery, using a pharmacological treatment or following a conservative treatment. In this paper, a clinical decision support systems based on artificial intelligence algorithms has been developed to help clinicians to choose the initial treatment to be followed by the patient. Methods: A decision support system based on a three stages classifier has been developed. Each stage acts as a filter and allows re-evaluation of the classification made in the previous stage in order to find diagnostic errors. This classifier has been implemented and tested for four different aid algorithms: Multilayer Perceptron, Deep Learning, Support Vector Machine and Naives Bayes. Results: The results prove that the evaluated algorithms Support Vector Machine and Multilayer Perceptron can be useful to help gynecologists in their decisions about initial treatment, especially with Support Vector Machine that presents accuracy, sensitivity and specificity outcomes about 96.1%, 96% and 98%, respectively. Conclusions: According to the results, it is feasible to develop a clinical decision support system using the algorithms that present a higher precision. This system would help gynecologists to take the most accurate decision about the initial treatment, thus avoiding future complications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of iron oxide content and microstructural porosity on the performance of ceramic membranes as microbial fuel cell separators

  • Salar-García, M.J.
  • Walter, X.A.
  • Gurauskis, J.
  • de Ramón Fernández, A.
  • Ieropoulos, I.
Ceramic materials based on naturally occurring clays are a low cost and environmentally friendly alternative to commercial polymer-based membranes in bioelectrochemical systems. In this work, ceramic membranes containing different amounts of iron oxide (1.06, 2.76 and 5.75 vol.%) and sintered at different temperatures (1100, 1200 and 1300 °C) have been elaborated and tested as separators in urine-fed microbial fuel cells (MFCs). The results reveal that the presence of iron oxide in the ceramic membrane composition increases the structural porosity and reduces the pore size for the three temperatures investigated. On the other hand, it was also observed that the iron content mitigates the negative effect of the high sintering temperature on the power performance of the MFCs. In the case of the ceramic membranes sintered at 1300 °C, power output improved ca. 10-fold when the iron oxide content in the membrane increased from 1.06 up to 5.75 vol.% (30.9 and 286.6 µW, respectively). Amongst the different combinations of iron phase content and sintering temperatures, the maximum power output was obtained by MFCs working with separators containing 5.75 vol. % of iron oxide and sintered at 1100 °C (1.045 mW). Finally, the system was stable for 65 days, which supports the long-term functionality of the different materials assessed.