Pasar al contenido principal

EMISIONES NEGATIVAS DE CO2 MEDIANTE COMBUSTION DE BIOMASA EN PROCESOS DE CHEMICAL LOOPING

BES-2015-074651

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical Looping Combustion of biomass: CLOU experiments with a Cu-Mn mixed oxide

  • Adánez-Rubio, Iñaki
  • Pérez-Astray, Antón
  • Mendiara, Teresa
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
© 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical looping combustion (CLC) is a low-cost CO2 capture technology with a low energy penalty. Bio-energy with CO2 capture and storage (BECCS) opens up the possibility for negative CO2 emissions involving the removal of CO2 already emitted into the atmosphere. The oxygen needed for combustion in CLC processes is supplied by a solid oxygen carrier circulating between the fuel reactor and the air reactor. In this work, the combustion of different types of biomass, such as pine sawdust, olive stones and almond shells, was studied in a continuous 1.5 kWth CLC unit. A mixed Cu-Mn oxide was used as the oxygen carrier. This material releases gaseous oxygen when reduced, resulting in Chemical looping combustion with oxygen uncoupling (CLOU). The released oxygen reacts with both the volatiles and char generated inside the fuel reactor when biomass is fed into it. The oxygen carrier is reoxidized in air inside the air reactor. High CO2 capture and 100% combustion efficiencies were achieved with this Cu-Mn oxygen carrier. The oxygen concentration inside the air reactor did not affect CO2 capture efficiency under the studied conditions., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO Project: ENE2014-56857-R) and European Regional Development Fund (ERDF) funds. T. Mendiara is grateful for the ‘‘Ramón y Cajal’’ post-doctoral contract awarded by MINECO. I. Adánez-Rubio acknowledges the MINECO and University of Zaragoza (UZ) for the post-doctoral grant awarded (FJCI-2015-23862). A. Pérez-Astray thanks MINECO for the BES-2015-074651 pre-doctoral fellowship co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Behavior of a manganese-iron mixed oxide doped with titanium in reducing the oxygen demand for CLC of biomass

  • Pérez-Astray, Antón
  • Mendiara, Teresa
  • Diego Poza, Luis F. de
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
7 figures, 5 tables.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical Looping Combustion (CLC) is a promising carbon capture technology to contribute to the development of BioEnergy with Carbon Capture and Storage (BECCS) technologies. In CLC, the oxygen needed for combustion is supplied by a solid oxygen carrier. During the last years, intensive research has been conducted to identify potential oxygen carriers. Iron and manganese-based minerals allowed obtaining high CO2 capture efficiencies, but lower values for the combustion efficiency, that is, high oxygen demand values, due to the high content of volatiles in biomass. Manganese-iron mixed oxides doped with titanium possess the capability of releasing molecular oxygen under specific conditions which would enhance volatile conversion. The objective of the present work was to evaluate the potential of one of these materials ((Mn66Fe)-Ti7) to improve the combustion efficiency of CLC with biomass in a 0.5 kWth continuous CLC unit. Almost 100% of CO2 capture efficiency was obtained in all the experiments. Once the operational conditions for the synthetic material (Mn66Fe)-Ti7 were optimized, it was possible to reach oxygen demand values about 10% with the advantage that the (Mn66Fe)-Ti7 oxygen carrier presented magnetic properties that would facilitate its separation from biomass ashes in the fuel reactor., This work was supported by ENE2017-89473-R AEI/FEDER, UE. A. Pérez-Astray thanks the Spanish Ministry of Economy and Competitiveness (MINECO) for the BES-2015-074651 pre-doctoral fellowship co-financed by the European Social Fund. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by MINECO., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemical looping with oxygen uncoupling: an advanced biomass combustion technology to avoid CO2 emissions

  • Adánez-Rubio, I.
  • Pérez-Astray, A.
  • Abad, A.
  • Gayán, P.
  • De Diego, L.F.
  • Adánez, J.
Bioenergy with carbon dioxide (CO2) capture and storage (BECCS) technologies represent an interesting option to reach negative carbon emissions, which implies the removal of CO2 already emitted to the atmosphere. Chemical looping combustion (CLC) with biomass can be considered as a promising BECCS technology since CLC has low cost and energy penalty. In CLC, the oxygen needed for combustion is supplied by a solid oxygen carrier circulating between the fuel and air reactors. In the fuel reactor, the fuel is oxidized producing a CO2-concentrated stream while the oxygen carrier is reduced. In the air reactor, the oxygen carrier is regenerated with air. Chemical looping with oxygen uncoupling (CLOU) is a CLC technology that allows the combustion of solid fuels as in common combustion with air by means of an oxygen carrier that release gaseous oxygen in the fuel reactor. In the last years, several Cu-based, Mn-based, and mixed oxide oxygen (O2) carriers have been tested showing good CLOU properties. Among them, copper (Cu)-based and Cu-Manganese (Mn) mixed oxides showed high reactivity, O2 release rate, and high O2 equilibrium concentration. The aim of this work is to study the viability of biomass combustion by CLOU process. The combustion of three types of biomass (pine sawdust, olive stone, and almond shell) were studied in a continuous 1.5 kWth CLC unit. Two O2 carriers were tested: a Cu-based oxygen carrier with Magnesium, Aluminum, Oxgen (MgAl2O4) as an inert prepared by spray drying (Cu60MgAl) and a mixed Cu-Mn oxide prepared by spray granulation (Cu34Mn66). These materials are capable of releasing gaseous oxygen when they are reduced in a different range of temperatures. CO2 capture and combustion efficiency were evaluated. Two fuel reactor operation temperatures were used: 775–850 °C for Cu34Mn66 and 900–935 °C for Cu60MgAl. High CO2 capture efficiencies and 100% combustion efficiency were reached with both oxygen carriers and with all the biomasses tested. Therefore, the CLOU technology with the Cu- and Cu-Mn-based oxygen carriers allowed avoiding CO2 emissions maintaining high combustion efficiencies. Results obtained demonstrate that this innovative biomass combustion technology combined with carbon storage lets an efficient BECCS process implementation.