RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación
Artículo científico (JournalArticle)
3-D Printed Waveguide Filters: Manufacturing Process and Surface Mounted Assembly
[EN] This article presents a new approach to manufacturing and assembling inexpensive, lightweight devices using 3-D-printed waveguides, and surface-mount technology (SMT). Specifically, we have employed stereolithography (SLA) and a combination of electroless and electroplating processes to develop cavity filters in the X- and C-bands. The filters can be efficiently integrated into planar circuits via a reliable and simple transition that enables surface-mount assembly. Two resonator topologies, circular and rectangular, were examined and compared to develop X-band filters, and a triplet topology has been developed for the C-band. The measured frequency responses were consistent with simulations, with insertion losses below 2 and 1.43 dB for X- and C-bands, respectively. We have conducted several Monte Carlo analyses and a dimensional study to assess the impact of manufacturing tolerances on filter per-formance. Furthermore, a rectangular cavity resonator has been used to approximate the effective conductivity of the deposited copper coating, considering the detrimental effects of oxidation and surface roughness. The resulting effective conductivity of 17.7 MS/m was found to be higher than the current state-of-the-art values. Finally, SMT assembly offers several advantages over traditional methods, including reduced size, simplified assembly, and integration with planar systems. The results presented in this work indicate that combining 3-D printing and SMT provides a simple and efficient solution for developing lightweight and highly integrated components with superior performance., This work was supported in part by the Agencia Valenciana de la Innovacion Research Projects under Grant INNVA1/2020/84 and Grant INNEST/2020/124, in part by the Agencia Estatal de Investigacion (Spain) through the Fellowship for Training Ph.D. Scholars under Grant BES-2017-079728, and in part by the Ministeriode Ciencia e Innovacion (MICIN, Spanish Government) through the Research and Development Project under Grant PID2019-103982RB-C41(under Grant MICIN/AEI/10.13039/501100011033).
Proyecto:
Agencia Estatal de Investigación / Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 PID2019-103982RB-C41
,
AGENCIA VALENCIANA DE LA INNOVACION / Programa Estatal de Promoción del Talento y su Empleabilidad INNVA1/2020/84
,
AGENCIA VALENCIANA DE LA INNOVACION INNEST/2022/124
,
Agència Valenciana de la Innovació INNEST/2020/124
,
Agencia Estatal de Investigación BES-2017-079728