Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A robust and automated methodology for the analysis of Time-Dependent Variability at transistor level

  • Saraza-Canflanca, Pablo|||0000-0003-2155-8305
  • Diaz-Fortuny, Javier|||0000-0002-8186-071X
  • Castro-Lopez, Rafael|||0000-0002-6247-3124
  • Roca, Elisenda|||0000-0001-6260-6495
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Fernandez, Francisco V.|||0000-0001-8682-2280
In the past few years, Time-Dependent Variability has become a subject of growing concern in CMOS technologies. In particular, phenomena such as Bias Temperature Instability, Hot-Carrier Injection and Random Telegraph Noise can largely affect circuit reliability. It becomes therefore imperative to develop reliability-aware design tools to mitigate their impact on circuits. To this end, these phenomena must be first accurately characterized and modeled. And, since all these phenomena reveal a stochastic nature for deeply-scaled integration technologies, they must be characterized massively on devices to extract the probability distribution functions associated to their characteristic parameters. In this work, a complete methodology to characterize these phenomena experimentally, and then extract the necessary parameters to construct a Time-Dependent Variability model, is presented. This model can be used by a reliability simulator.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the impact of the biasing history on the characterization of random telegraph noise

  • Saraza-Canflanca, P.
  • Castro-López, Rafael
  • Roca, Elisenda
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafría, Montserrat
  • Fernández, Francisco V.
Random Telegraph Noise is a time-dependent variability phenomenon that has gained increased attention during the last years, especially in deeply-scaled technologies. In particular, there is a wide variety of works presenting different techniques designed to analyze current traces in scaled FET devices displaying Random Telegraph Noise, and others focused on modeling the phenomenon using the parameters extracted through such techniques. However, very little attention has been paid to the effects that the biasing conditions of the transistors prior to the measurements may have on the extraction of the parameters that characterize this phenomenon. This paper investigates how these biasing conditions actually impact the extracted results. Specifically, it is demonstrated that the results obtained when Random Telegraph Noise is measured immediately after the device is biased may lead to an overestimation of the Random Telegraph Noise impact with respect to situations in which the device has been previously biased for some time. This fact is, first, presented from a theoretical point of view, and, after, demonstrated experimentally through measurements obtained from a CMOS-transistor array., MCIN/AEI/10.13039/501100011033 (Grant Number: PID2019-103869RBC31 and PID2019-103869RB-C32) MCIN/AEI/10.13039/501100011033 (Grant Number: BES-2017-080160) “ESF Investing in your future”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A DRV-based bit selection method for SRAM PUF key generation and its impact on ECCs

  • Santana-Andreo, A.
  • Saraza-Canflanca, P.
  • Carrasco-López, H.
  • Brox, Piedad
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
- PUFs based on the power-up values of an array of SRAM cells are a popular solution to provide secure and low-cost key generation suitable for IoT devices. However, SRAM cells do not always power up to the same value due to external factors like noise, temperature, or aging. This results in a decrease of reliability for the SRAM PUF, an issue generally solved by employing complex Error Correction Codes (ECCs). However, ECCs significantly increase the cost of the complete system. A way to alleviate this issue is the use of bit selection methods, which increase the reliability of the SRAM PUF by using only the power-up values of the most reliable cells (i.e., the SRAM cells that consistently power up to the same value). In this work, the reduction in ECC complexity through a bit selection method based on the Data Retention Voltage metric is demonstrated., This work was supported by AEI under Project PID2019-103869RB-C31/AEI/10.13039/501100011033, and by P.O. FEDER under project US-1380876. Pablo Sarazá Canflanca and Andrés Santana Andreo acknowledge MICINN for supporting their research activity through the predoctoral grants BES-2017-080160 and PRE-2020-093167, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A New Time Efficient Methodology for the Massive Characterization of RTN in CMOS Devices

  • Pedreira, G.
  • Martín-Martínez, Javier
  • Díaz-Fortuny, Javier
  • Saraza-Canflanca, P.
  • Rodríguez, Rosana
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
  • Nafria, M.
Talk delivered at the IEEE International Reliability Physics Symposium (IRPS) in Monterrey, California (USA), March 31– April 4, 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this work a new method to characterize Random Telegraph Noise (RTN) in a large number of devices is presented. The method is applied to the RTN characterization of nearly 800 pMOS transistors and compared with conventional approaches. The results presented here show that the new method, which requires the measurement of each device only in two instants, can hugely reduce the measurement time needed for the statistical characterization of RTN., This work was supported by Spanish AEI and ERDF under Project TEC2016-75151-C3-R. The work of G. Pedreira, J. Diaz-Fortuny and P. Saraza-Canflanca was supported by AEI under grants BES-2017-081462, BES-2014-067855 and BES- 2017-080160 respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Generation of Lifetime-Aware Pareto-Optimal Fronts Using a Stochastic Reliability Simulator

  • Toro-Frias, A.
  • Saraza-Canflanca, P.
  • Passos, Fábio
  • Martin-Lloret, P.
  • Castro-López, Rafael
  • Roca, Elisenda
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafria, M.
  • Fernández, Francisco V.
Talk delivered at the 2019 Design, Automation & Test in Europe Conference & Exhibition (DATE) in Florence (Italy), 25 – 29 March 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Process variability and time-dependent variability have become major concerns in deeply-scaled technologies. Two of the most important time-dependent variability phenomena are Bias Temperature Instability (BTI) and Hot-Carrier Injection (HCI), which can critically shorten the lifetime of circuits. Both BTI and HCI reveal a discrete and stochastic behavior in the nanometer scale, and, while process variability has been extensively treated, there is a lack of design methodologies that address the joint impact of these two phenomena on circuits. In this work, an automated and time-efficient design methodology that takes into account both process and time-dependent variability is presented. This methodology is based on the utilization of lifetime-aware Pareto-Optimal Fronts (POFs). The POFs are generated with a multi-objective optimization algorithm linked to a stochastic simulator. Both the optimization algorithm and the simulator have been specifically tailored to reduce the computational cost of the accurate evaluation of the impact on a circuit of both sources of variability., This work has been supported by the TEC2016-75151-C3-R Project (funded by the Spanish MINECO and ERDF). Pablo Sarazá Canflanca acknowledges MINECO for supporting his research activity through the predoctoral grant BES-2017-080160., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

New method for the automated massive characterization of Bias Temperature Instability in CMOS transistors

  • Saraza-Canflanca, P.
  • Díaz-Fortuny, Javier
  • Castro-López, Rafael
  • Roca, Elisenda
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafria, M.
  • Fernández, Francisco V.
Talk delivered at the 2019 Design, Automation & Test in Europe Conference & Exhibition (DATE), in Florence (Italy), 25 – 29 March 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Bias Temperature Instability has become a critical issue for circuit reliability. This phenomenon has been found to have a stochastic and discrete nature in nanometer-scale CMOS technologies. To account for this random nature, massive experimental characterization is necessary so that the extracted model parameters are accurate enough. However, there is a lack of automated analysis tools for the extraction of the BTI parameters from the extensive amount of generated data in those massive characterization tests. In this paper, a novel algorithm that allows the precise and fully automated parameter extraction from experimental BTI recovery current traces is presented. This algorithm is based on the Maximum Likelihood Estimation principles, and is able to extract, in a robust and exact manner, the threshold voltage shifts and emission times associated to oxide trap emissions during BTI recovery, required to properly model the phenomenon., This work has been supported by the TEC2016-75151-C3-R Projects (funded by the Spanish MINECO and ERDF). Javier Díaz Fortuny acknowledges MINECO for supporting his research activity through the FPI grant BES-2014-067855. Pablo Sarazá Canflanca acknowledges MINECO for supporting his research activity through the predoctoral grant BES-2017-080160., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Improving the reliability of SRAM-based PUFs in the presence of aging

  • Saraza-Canflanca, P.
  • Carrasco-Lopez, H.
  • Brox, Piedad
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
Talk delivered at the 2020 conference 15th Design & Technology of Integrated Systems in Nanoscale Era (DTIS), Marrakesh (Morocco), April 1-3, 2020. © 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The utilization of power-up values in SRAM cells for the generation of PUF responses has been widely studied. It is important that the cells used for this purpose are stable, i.e., the cells must have a strong tendency towards one of the two possible values ('0' or '1'). Some methods have been presented that aim at increasing the reliability of this type of PUFs by selecting the strongest cells among a set of them. However, they feature some drawbacks, either in terms of their practical feasibility or of their actual effectiveness selecting the strongest cells in different scenarios. In this work, the experimental results obtained for a new method to classify the cells according to their strength are presented and discussed. The technique overcomes some of the drawbacks that the previous methods present. In particular, it is experimentally demonstrated that the technique presented in this work outstands in selecting SRAM cells that are very robust against circuit degradation, which translates into the construction of reliable SRAM-based PUFs., This work was supported by the TEC2016-75151-C3-R Project (funded by the Spanish MINECO and ERDF). Pablo Sarazá Canflanca acknowledges MINECO for supporting his research activity through the predoctoral grant BES-2017-080160., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Statistical characterization of time-dependent variability defects using the maximum current fluctuation

  • Saraza-Canflanca, Pablo|||0000-0003-2155-8305
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Castro-Lopez, Rafael|||0000-0002-6247-3124
  • Roca, Elisenda|||0000-0001-6260-6495
  • Rodriguez, R.|||0000-0002-4565-6703
  • Fernandez, Francisco V.|||0000-0001-8682-2280
  • Nafria, Montserrat|||0000-0002-9549-2890
This article presents a new methodology to extract, at a given operation condition, the statistical distribution of the number of active defects that contribute to the observed device time-dependent variability, as well as their amplitude distribution. Unlike traditional approaches based on complex and time-consuming individual analysis of thousands of current traces, the proposed approach uses a simpler trace processing, since only the maximum and minimum values of the drain current during a given time interval are needed. Moreover, this extraction method can also estimate defects causing small current shifts, which can be very complex to identify by traditional means. Experimental data in a wide range of gate voltages, from near-threshold up to nominal operation conditions, are analyzed with the proposed methodology.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Statistical threshold voltage shifts caused by BTI and HCI at nominal and accelerated conditions

  • Diaz-Fortuny, Javier|||0000-0002-8186-071X
  • Saraza-Canflanca, Pablo|||0000-0003-2155-8305
  • Rodriguez, R.|||0000-0002-4565-6703
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Castro-Lopez, Rafael|||0000-0002-6247-3124
  • Roca, Elisenda|||0000-0001-6260-6495
  • Fernandez, Francisco V.|||0000-0001-8682-2280
  • Nafria, Montserrat|||0000-0002-9549-2890
In nowadays deeply scaled CMOS technologies, time-zero and time-dependent variability effects have become important concerns for analog and digital circuit design. For instance, transistor parameter shifts caused by Bias Temperature Instability and Hot-Carrier Injection phenomena can lead to progressive deviations of the circuit performance or even to its catastrophic failure. In this scenario, and to understand the effects of these variability sources, an extensive and accurate device characterization under several test conditions has become an unavoidable step towards trustworthy implementing the stochastic reliability models and simulation tools needed to achieve reliable integrated circuits. In this paper, the statistical distributions of threshold voltage shifts in nanometric CMOS transistors will be studied at nominal and accelerated aging conditions. To this end, a versatile transistor array chip and a flexible measurement setup have been used to reduce the required testing time to attainable values.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On the impact of the biasing history on the characterization of random telegraph noise

  • Saraza-Canflanca, Pablo|||0000-0003-2155-8305
  • Castro-Lopez, Rafael|||0000-0002-6247-3124
  • Roca, Elisenda|||0000-0001-6260-6495
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Fernandez, Francisco V.|||0000-0001-8682-2280
Random telegraph noise (RTN) is a time-dependent variability phenomenon that has gained increased attention during the last years, especially in deeply scaled technologies. In particular, there is a wide variety of works presenting different techniques designed to analyze current traces in scaled FET devices displaying RTN, and others focused on modeling the phenomenon using the parameters extracted through such techniques. However, very little attention has been paid to the effects that the biasing conditions of the transistors prior to the measurements may have on the extraction of the parameters that characterize this phenomenon. This article investigates how these biasing conditions actually impact the extracted results. In particular, it is demonstrated that the results obtained when RTN is measured immediately after the device is biased may lead to an overestimation of the RTN impact with respect to situations in which the device has been previously biased for some time. This fact is, first, presented from a theoretical point of view and, after, demonstrated experimentally through measurements obtained from a CMOS-transistor array.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Simulating the impact of random telegraph noise on integrated circuits

  • Saraza-Canflanca, Pablo|||0000-0003-2155-8305
  • Camacho-Ruiz, Eros|||0000-0002-3177-2260
  • Castro-Lopez, Rafael|||0000-0002-6247-3124
  • Roca, Elisenda|||0000-0001-6260-6495
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Fernandez, Francisco V.|||0000-0001-8682-2280
This paper addresses the statistical simulation of integrated circuits affected by Random Telegraph Noise (RTN). For that, the statistical distributions of the parameters of a defect-centric model for RTN are experimentally determined from a purposely designed integrated circuit with CMOS transistor arrays. Then, these distribution functions are used in a statistical simulation methodology that, taking into account transistor sizes, biasing conditions and time, can assess the impact of RTN in the performance of an integrated circuit. Simulation results of a simple circuit are shown together with experimental measurements of a circuit with the same characteristics implemented in the same CMOS technology.