Pasar al contenido principal

METRES (METABOLIC RECONSTRUCTION SERVER DESARROLLO Y APLICACION EN EN ESTUDIO DE PRINCIPIOS DE DISEÑO BIOLOGICO

BFU2010-17704

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE LLEIDA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Two component systems: physiological effect of a third component

  • Salvadó López, Baldiri
  • Vilaprinyo Terré, Ester
  • Karathia, Hiren
  • Sorribas Tello, Albert
  • Alves, Rui
Signal transduction systems mediate the response and adaptation of organisms to environmental changes. In prokaryotes, this signal transduction is often done through Two Component Systems (TCS). These TCS are phosphotransfer protein cascades, and in their prototypical form they are composed by a kinase that senses the environmental signals (SK) and by a response regulator (RR) that regulates the cellular response. This basic motif can be modified by the addition of a third protein that interacts either with the SK or the RR in a way that could change the dynamic response of the TCS module. In this work we aim at understanding the effect of such an additional protein (which we call ‘‘third component’’) on the functional properties of a prototypical TCS. To do so we build mathematical models of TCS with alternative designs for their interaction with that third component. These mathematical models are analyzed in order to identify the differences in dynamic behavior inherent to each design, with respect to functionally relevant properties such as sensitivity to changes in either the parameter values or the molecular concentrations, temporal responsiveness, possibility of multiple steady states, or stochastic fluctuations in the system. The differences are then correlated to the physiological requirements that impinge on the functioning of the TCS. This analysis sheds light on both, the dynamic behavior of synthetically designed TCS, and the conditions under which natural selection might favor each of the designs. We find that a third component that modulates SK activity increases the parameter space where a bistable response of the TCS module to signals is possible, if SK is monofunctional, but decreases it when the SK is bifunctional. The presence of a third component that modulates RR activity decreases the parameter space where a bistable response of the TCS module to signals is possible., This work was partially supported by grants BFU2008-0196 to AS and BFU2010-17704 to RA, both from MICINN (Ministerio de Ciencia e Innovación, Spain). HK is funded by a Ph. D. fellowship and EV is funded by a Beatriu de Pinós Post-doctoral fellowship, both from AGAUR (Agència de Gestió d'Ajuts Universitaris i de Recerca, Catalunya). No additional external funding received for this study. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Computer-assisted initial diagnosis of rare diseases

  • Alves, Rui
  • Piñol, Marc
  • Vilaplana Mayoral, Jordi
  • Teixidó Torrelles, Ivan
  • Cruz, Joaquim
  • Comas, Jorge
  • Vilaprinyo Terré, Ester
  • Sorribas Tello, Albert
  • Solsona Tehàs, Francesc
Introduction. Most documented rare diseases have genetic origin. Because of their low individual frequency, an initial diagnosis based on phenotypic symptoms is not always easy, as practitioners might never have been exposed to patients suffering from the relevant disease. It is thus important to develop tools that facilitate symptom-based initial diagnosis of rare diseases by clinicians. In this work we aimed at developing a computational approach to aid in that initial diagnosis. We also aimed at implementing this approach in a user friendly web prototype. We call this tool Rare Disease Discovery. Finally, we also aimed at testing the performance of the prototype. Methods. Rare Disease Discovery uses the publicly available ORPHANET data set of association between rare diseases and their symptoms to automatically predict the most likely rare diseases based on a patient’s symptoms. We apply the method to retrospectively diagnose a cohort of 187 rare disease patients with confirmed diagnosis. Subsequently we test the precision, sensitivity, and global performance of the system under different scenarios by running large scale Monte Carlo simulations. All settings account for situations where absent and/or unrelated symptoms are considered in the diagnosis. Results. We find that this expert system has high diagnostic precision (≥80%) and sensitivity (≥99%), and is robust to both absent and unrelated symptoms. Discussion. The Rare Disease Discovery prediction engine appears to provide a fast and robust method for initial assisted differential diagnosis of rare diseases. We coupled this engine with a user-friendly web interface and it can be freely accessed at http://disease-discovery.udl.cat/. The code and most current database for the whole project can be downloaded from https://github.com/Wrrzag/DiseaseDiscovery/tree/no_classifiers., This work was partially supported by the MEyC under contracts TIN2014-53234-C2- 2-R, TIN2011-28689-C02-02 and BFU2010-17704 and by Universitat de Lleida and Departament de Ciències Mèdiques Bàsiques with bridge grants to RA. The authors are members of the research groups 2014-SGR163 and 2014-SGR243, funded by the Generalitat de Catalunya.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

A survey of HK, HPt, and RR domains and their organization in two-component systems and phosphorelay proteins of organisms with fully sequenced genomes

  • Salvadó López, Baldiri
  • Vilaprinyo Terré, Ester
  • Sorribas Tello, Albert
  • Alves, Rui
Two Component Systems and Phosphorelays (TCS/PR) are environmental signal transduction cascades in prokaryotes and, less frequently, in eukaryotes. The internal domain organization of proteins and the topology of TCS/PR cascades play an important role in shaping the responses of the circuits. It is thus important to maintain updated censuses of TCS/PR proteins in order to identify the various topologies used by nature and enable a systematic study of the dynamics associated with those topologies. To create such a census, we analyzed the proteomes of 7,609 organisms from all domains of life with fully sequenced and annotated genomes. To begin, we survey each proteome searching for proteins containing domains that are associated with internal signal transmission within TCS/PR: Histidine Kinase (HK), Response Regulator (RR) and Histidine Phosphotranfer (HPt) domains, and analyze how these domains are arranged in the individual proteins. Then, we find all types of operon organization and calculate howmuch more likely are proteins that contain TCS/PR domains to be coded by neighboring genes than one would expect fromthe genome background of each organism. Finally, we analyze if the fusion of domains into single TCS/PR proteins is more frequently observed than one might expect from the background of each proteome. We find 50 alternative ways in which the HK, HPt, and RR domains are observed to organize into single proteins. In prokaryotes, TCS/PR coding genes tend to be clustered in operons. 90% of all proteins identified in this study contain just one of the three domains, while 8% of the remaining proteins combine one copy of an HK, a RR, and/or an HPt domain. In eukaryotes, 25% of all TCS/PR proteins have more than one domain. These results might have implications for how signals are internally transmitted within TCS/PR cascades. These implications could explain the selection of the various designs in alternative circumstances., This work was partially funded by Grant BFU2010-17704 from the Spanish MINECO and from small grants CMB and TR255 from University of Lleida to RA.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Steady-state global optimization of metabolic non-linear dynamic models through recasting into power-law canonical models

  • Pozo Fernández, Carlos
  • Marin-Sanguino, Alberto
  • Alves, Rui
  • Guillén Gosálbez, Gonzalo
  • Jiménez Esteller, Laureano
  • Sorribas Tello, Albert
Background: Design of newly engineered microbial strains for biotechnological purposes would greatly benefit from the development of realistic mathematical models for the processes to be optimized. Such models can then be analyzed and, with the development and application of appropriate optimization techniques, one could identify the modifications that need to be made to the organism in order to achieve the desired biotechnological goal. As appropriate models to perform such an analysis are necessarily non-linear and typically non-convex, finding their global optimum is a challenging task. Canonical modeling techniques, such as Generalized Mass Action (GMA) models based on the power-law formalism, offer a possible solution to this problem because they have a mathematical structure that enables the development of specific algorithms for global optimization. Results: Based on the GMA canonical representation, we have developed in previous works a highly efficient optimization algorithm and a set of related strategies for understanding the evolution of adaptive responses in cellular metabolism. Here, we explore the possibility of recasting kinetic non-linear models into an equivalent GMA model, so that global optimization on the recast GMA model can be performed. With this technique, optimization is greatly facilitated and the results are transposable to the original non-linear problem. This procedure is straightforward for a particular class of non-linear models known as Saturable and Cooperative (SC) models that extend the power-law formalism to deal with saturation and cooperativity. Conclusions: Our results show that recasting non-linear kinetic models into GMA models is indeed an appropriate strategy that helps overcoming some of the numerical difficulties that arise during the global optimization task., AS is funded by MICINN (Spain) (BFU2008-0196). RA is partially supported by MICINN (Spain) through Grants BFU2007-62772/BMC and BFU2010-17704). AS and RA are members of the 2009SGR809 research group of the Generalitat de Catalunya. GG-G and CP acknowledges support from the Spanish Ministry of Science and Innovation (Projects DPI2008-04099 and CTQ2009-14420-C02-01) and the Spanish Ministry of External Affairs and Cooperation (Projects A/023551/09 and A/031707/10).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Biblio-MetReS for user-friendly mining of genes and biological processes in scientific documents

  • Usié Chimenos, Anabel
  • Karathia, Hiren
  • Teixidó Torrelles, Ivan
  • Alves, Rui
  • Solsona Tehàs, Francesc
One way to initiate the reconstruction of molecular circuits is by using automated text-mining techniques. Developing more efficient methods for such reconstruction is a topic of active research, and those methods are typically included by bioinfor- maticians in pipelines used to mine and curate large literature datasets. Nevertheless, experimental biologists have a limited number of available user-friendly tools that use text-mining for network reconstruction and require no programming skills to use. One of these tools is Biblio-MetReS. Originally, this tool permitted an on-the-fly analysis of documents contained in a number of web-based literature databases to identify co-occurrence of proteins/genes. This approach ensured results that were always up-to-date with the latest live version of the databases. However, this `up-to- dateness' came at the cost of large execution times. Here we report an evolution of the application Biblio-MetReS that permits constructing co-occurrence networks for genes, GO processes, Pathways, or any combination of the three types of entities and graphically represent those entities.We show that the performance of Biblio- MetReS in identifying gene co-occurrence is as least as good as that of other com- parable applications (STRING and iHOP). In addition, we also show that the iden- tification of GO processes is on par to that reported in the latest BioCreAtIvE chal- lenge. Finally, we also report the implementation of a new strategy that combines on-the-fly analysis of new documents with preprocessed information from docu- ments that were encountered in previous analyses. This combination simultaneously decreases program run time and maintains `up-to-dateness' of the results., RA was partially supported by the Ministerio de Ciencia e Innovación (MICINN, Spain through grant BFU2010-17704). FS was partially funded by the MICINN, with grants TIN2011-28689-C02-02. The authors are members of the research groups 2009SGR809 and 2009SGR145, funded by the “Generalitat de Catalunya”. AU is funded by a Generalitat de Catalunya (AGAUR) PhD fellowship. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Evaluating multi-locus phylogenies for species boundaries determination in the genus Diaporthe

  • Santos, Liliana
  • Alves, Artur
  • Alves, Rui
Background. Species identification is essential for controlling disease, understanding epidemiology, and to guide the implementation of phytosanitary measures against fungi from the genus Diaporthe. Accurate Diaporthe species separation requires using multi loci phylogernes. However, defining the optimal set of loci that can be used for species identification is still an open problem. Methods. Here we addressed that problem by identifying five loci that have been sequenced in 142 Diaporthe isolates representing 96 species: TEF1, TUB, CAL, HIS and ITS. We then used every possible combination of those loci to build, analyse, and compare phylogenetic trees. Results. As expected, species separation is better when all five loci are simultaneously used to build the phylogeny of the isolates. However, removing the ITS locus has little effect on reconstructed phylogenies, identifying the TEF1-TUB-CAL-HIS 4-loci tree as almost equivalent to the 5-loci tree. We further identify the best 3-loci, 2-loci, and 1-locus trees that should be used for species separation in the genus. Discussion. Our results question the current use of the ITS locus for DNA barcoding in the genus Diaporthe and suggest that TEF1 might be a better choice if one locus barcoding needs to be done., This work was financed by European Funds through COMPETE and by National Funds through the Portuguese Foundation for Science and Technology (FCT) within project PANDORA (PTDC/AGR-FOR/3807/2012 –FCOMP-01-0124-FEDER-027979). The authors received financing from FCT to CESAM (UID/AMB/50017/2013), Artur Alves (FCT Investigator Programme –IF/00835/2013) and a post-doctoral grant to Liliana Santos (SFRH/BPD/90684/2012), grants BFU2010-17704 from Ministerio de Ciencia e Innovación, 2009SGR809 from Generalitat de Catalunya, and bridge grants from the Dean for Research and the Departament de Ciències Mèdiques Bàsiques of the University of Lleida (Spain) to Rui Alves.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

CheNER: a tool for the identification of chemical entities and their classes in biomedical literature

  • Solsona Tehàs, Francesc
  • Alves, Rui
  • Usié Chimenos, Anabel
  • Cruz, Joaquim
  • Comas, Jorge
Background: Small chemical molecules regulate biological processes at the molecular level. Those molecules are often involved in causing or treating pathological states. Automatically identifying such molecules in biomedical text is difficult due to both, the diverse morphology of chemical names and the alternative types of nomenclature that are simultaneously used to describe them. To address these issues, the last BioCreAtIvE challenge proposed a CHEMDNER task, which is a Named Entity Recognition (NER) challenge that aims at labelling different types of chemical names in biomedical text. Methods: To address this challenge we tested various approaches to recognizing chemical entities in biomedical documents. These approaches range from linear Conditional Random Fields (CRFs) to a combination of CRFs with regular expression and dictionary matching, followed by a post-processing step to tag those chemical names in a corpus of Medline abstracts. We named our best performing systems CheNER. Results: We evaluate the performance of the various approaches using the F-score statistics. Higher F-scores indicate better performance. The highest F-score we obtain in identifying unique chemical entities is 72.88%. The highest F-score we obtain in identifying all chemical entities is 73.07%. We also evaluate the F-Score of combining our system with ChemSpot, and find an increase from 72.88% to 73.83%. Conclusions: CheNER presents a valid alternative for automated annotation of chemical entities in biomedical documents. In addition, CheNER may be used to derive new features to train newer methods for tagging chemical entities. CheNER can be downloaded from http://metres.udl.cat and included in text annotation pipelines., Funding for publication of this article comes from grants BFU2010-17704 and TIN2011-28689-C02-02 from the Spanish Ministry of Economy and Competitiveness.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Quantitative operating principles of yeast metabolism during adaptation to heat stress

  • Pereira, Tania
  • Vilaprinyo Terré, Ester
  • Bellí i Martínez, Gemma
  • Herrero Perpiñán, Enrique
  • Salvadó López, Baldiri
  • Sorribas Tello, Albert
  • Altés Bargalló, Gisela
  • Alves, Rui
Microorganisms evolved adaptive responses to survive stressful challenges in ever-changing environments. Understanding the relationships between the physiological/metabolic adjustments allowing cellular stress adaptation and gene expression changes being used by organisms to achieve such adjustments may significantly impact our ability to understand and/or guide evolution. Here, we studied those relationships during adaptation to various stress challenges in Saccharomyces cerevisiae, focusing on heat stress responses. We combined dozens of independent experiments measuring whole-genome gene expression changes during stress responses with a simplified kinetic model of central metabolism. We identified alternative quantitative ranges for a set of physiological variables in the model (production of ATP, trehalose, NADH, etc.) that are specific for adaptation to either heat stress or desiccation/rehydration. Our approach is scalable to other adaptive responses and could assist in developing biotechnological applications to manipulate cells for medical, biotechnological, or synthetic biology purposes., This project has received funding from the European Union’s Seventh Framework Programme for Research, Technological Development and Demonstration (609396). This work was partially funded by grants from the Spanish MINECO (BFU2008- 0196 and BFU2010-17704) and Generalitat de Catalunya (2009SGR809) and bridge grants from the Dean for Research (2014, 2017) and the Departament de Ciències Mèdiques Bàsiques (2014) of the University of Lleida.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Methods for and results from the study of design principles in molecular systems

  • Salvadó López, Baldiri
  • Karathia, Hiren
  • Usié Chimenos, Anabel
  • Vilaprinyo Terré, Ester
  • Omholt, Stig
  • Sorribas Tello, Albert
  • Alves, Rui
Most aspects of molecular biology can be understood in terms of biological design principles. These principles can be loosely defined as qualitative and quantitative features that emerge in evolution and recur more frequently than one would expect by chance alone in biological systems that perform a given type of process or function. Furthermore, such recurrence can be rationalized in terms of the functional advantage that the design provides to the system when compared with possible alternatives. This paper focuses on those design features that can be related to improved functional effectiveness of molecular and regulatory networks. We begin by reviewing assumptions and methods that underlie the study of such principles in molecular networks. We follow by discussing many of the design principles that have been found in genetic, metabolic, and signal transduction circuits. We concentrate mainly on results in the context of Biochemical Systems Theory, although we also briefly discuss other work. We conclude by discussing the importance of these principles for both, understanding the natural evolution of complex networks at the molecular level and for creating artificial biological systems with specific features., R.A. is partially supported by the Ministerio de Ciencia e Innovación (MICINN, Spain through Grants BFU2007-62772/BMC and BFU2010-17704) and by the FLAD foundation during a short stay at the Computational Biology Collaboratorium. E.V. is supported by a Beatriu de Pinós post doctoral fellowship from Generalitat de Catalunya. H.K. is supported by a Ph.D. fellowship from Generalitat de Catalunya. A.U. is supported by a Ph.D. fellowship from UdL. A.S. is supported by Grant BFU2008-0196 from MICINN. R.A., H.K., E.V. and A.S. are members of the Generalitat de Catalunya Research Group 2009 SGR 809.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Saccharomyces cerevisiae as a model organism: a comparative study

  • Karathia, Hiren
  • Vilaprinyo Terré, Ester
  • Sorribas Tello, Albert
  • Alves, Rui
Background: Model organisms are used for research because they provide a framework on which to develop and optimize methods that facilitate and standardize analysis. Such organisms should be representative of the living beings for which they are to serve as proxy. However, in practice, a model organism is often selected ad hoc, and without considering its representativeness, because a systematic and rational method to include this consideration in the selection process is still lacking. Methodology/Principal Findings: In this work we propose such a method and apply it in a pilot study of strengths and limitations of Saccharomyces cerevisiae as a model organism. The method relies on the functional classification of proteins into different biological pathways and processes and on full proteome comparisons between the putative model organism and other organisms for which we would like to extrapolate results. Here we compare S. cerevisiae to 704 other organisms from various phyla. For each organism, our results identify the pathways and processes for which S. cerevisiae is predicted to be a good model to extrapolate from. We find that animals in general and Homo sapiens in particular are some of the non-fungal organisms for which S. cerevisiae is likely to be a good model in which to study a significant fraction of common biological processes. We validate our approach by correctly predicting which organisms are phenotypically more distant from S. cerevisiae with respect to several different biological processes. Conclusions/Significance: The method we propose could be used to choose appropriate substitute model organisms for the study of biological processes in other species that are harder to study. For example, one could identify appropriate models to study either pathologies in humans or specific biological processes in species with a long development time, such as plants., This work was partially financed by fellowships AP2002-2772 and Beatriu dePinós to EV. HK is funded by a Generalitat de Catalunya Ph. D. fellowship. RA was partially supported by the Ministerio de Ciencia e Innovación (MICINN, Spain through the Ramon y Cajal program and grants BFU2007-62772/BMC and BFU2010-17704) and by the FLAD foundation during a short stay. AS acknowledges financial support from grant BFU2008-0196 from MICINN. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

An in vitro system for the rapid functional characterization of genes involved in carotenoid biosynthesis and accumulation

  • Bai, Chao
  • Rivera Vélez, Sol Maiam
  • Medina Piles, Vicente
  • Alves, Rui
  • Vilaprinyo Terré, Ester
  • Sorribas Tello, Albert
  • Canela i Garayoa, Ramon
  • Capell Capell, Teresa
  • Sandmann, Gerhard
  • Christou, Paul
  • Zhu, Changfu
We have developed an assay based on rice embryogenic callus for rapid functional characterization of metabolic genes. We validated the assay using a selection of well-characterized genes with known functions in the carotenoid biosynthesis pathway, allowing rapid visual screening of callus phenotypes based on tissue color. We then used the system to identify the functions of two uncharacterized genes: a chemically synthesized β–carotene ketolase gene optimized for maize codon usage, and a wild-type Arabidopsis thaliana ortholog of the cauliflower Orange gene. In contrast to previous reports (Lopez, A.B., Van Eck, J., Conlin, B.J., Paolillo, D.J., O'Neill, J. and Li, L. (2008) J. Exp. Bot. 59, 213–223; Lu, S., Van Eck, J., Zhou, X., Lopez, A.B., O'Halloran, D.M., Cosman, K.M., Conlin, B.J., Paolillo, D.J., Garvin, D.F., Vrebalov, J., Kochian, L.V., Küpper, H., Earle, E.D., Cao, J. and Li, L. (2006) Plant Cell 18, 3594–3605), we found that the wild-type Orange allele was sufficient to induce chromoplast differentiation. We also found that chromoplast differentiation was induced by increasing the availability of precursors and thus driving flux through the pathway, even in the absence of Orange. Remarkably, we found that diverse endosperm-specific promoters were highly active in rice callus despite their restricted activity in mature plants. Our callus system provides a unique opportunity to predict the effect of metabolic engineering in complex pathways, and provides a starting point for quantitative modeling and the rational design of engineering strategies using synthetic biology. We discuss the impact of our data on analysis and engineering of the carotenoid biosynthesis pathway., This study was supported by the Ministerio de Ciencia e Innovaci _on, Spain (AGL2010-15691, BFU2010-17704 and BIO2011-22525), the Generalitat de Catalunya (2009SGR809), and a European Research Council Advanced Grant (BIOFORCE). We thank Veronica Teixido and Jorge Comas (Department Cie` ncies Me` diques Ba` siques, Universitat de Lleida & Institut de Recerca Biomèdica de Lleida Edifici Recerca Biomèdica I, Avenida Alcalde Rovira Roure 80, 25198 Lleida, Spain) for assistance with the ImageJ analysis.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Quantitative operating principles of yeast metabolism during adaptation to heat stress

  • Pereira, Tania
  • Vilaprinyo Terré, Ester
  • Bellí i Martínez, Gemma
  • Herrero Perpiñán, Enrique
  • Salvadó López, Baldiri
  • Sorribas Tello, Albert
  • Altés Bargalló, Gisela
  • Alves, Rui
Microorganisms evolved adaptive responses to survive stressful challenges in ever-changing environments. Understanding the relationships between the physiological/metabolic adjustments allowing cellular stress adaptation and gene expression changes being used by organisms to achieve such adjustments may significantly impact our ability to understand and/or guide evolution. Here, we studied those relationships during adaptation to various stress challenges in Saccharomyces cerevisiae, focusing on heat stress responses. We combined dozens of independent experiments measuring whole-genome gene expression changes during stress responses with a simplified kinetic model of central metabolism. We identified alternative quantitative ranges for a set of physiological variables in the model (production of ATP, trehalose, NADH, etc.) that are specific for adaptation to either heat stress or desiccation/rehydration. Our approach is scalable to other adaptive responses and could assist in developing biotechnological applications to manipulate cells for medical, biotechnological, or synthetic biology purposes., This project has received funding from the European Union’s Seventh Framework Programme for Research, Technological Development and Demonstration (609396). This work was partially funded by grants from the Spanish MINECO (BFU2008- 0196 and BFU2010-17704) and Generalitat de Catalunya (2009SGR809) and bridge grants from the Dean for Research (2014, 2017) and the Departament de Ciències Mèdiques Bàsiques (2014) of the University of Lleida.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Steady-state global optimization of metabolic non-linear dynamic models through recasting into power-law canonical models

  • Pozo Fernández, Carlos
  • Marin-Sanguino, Alberto
  • Alves, Rui
  • Guillén Gosálbez, Gonzalo
  • Jiménez Esteller, Laureano
  • Sorribas Tello, Albert
Background: Design of newly engineered microbial strains for biotechnological purposes would greatly benefit from the development of realistic mathematical models for the processes to be optimized. Such models can then be analyzed and, with the development and application of appropriate optimization techniques, one could identify the modifications that need to be made to the organism in order to achieve the desired biotechnological goal. As appropriate models to perform such an analysis are necessarily non-linear and typically non-convex, finding their global optimum is a challenging task. Canonical modeling techniques, such as Generalized Mass Action (GMA) models based on the power-law formalism, offer a possible solution to this problem because they have a mathematical structure that enables the development of specific algorithms for global optimization. Results: Based on the GMA canonical representation, we have developed in previous works a highly efficient optimization algorithm and a set of related strategies for understanding the evolution of adaptive responses in cellular metabolism. Here, we explore the possibility of recasting kinetic non-linear models into an equivalent GMA model, so that global optimization on the recast GMA model can be performed. With this technique, optimization is greatly facilitated and the results are transposable to the original non-linear problem. This procedure is straightforward for a particular class of non-linear models known as Saturable and Cooperative (SC) models that extend the power-law formalism to deal with saturation and cooperativity. Conclusions: Our results show that recasting non-linear kinetic models into GMA models is indeed an appropriate strategy that helps overcoming some of the numerical difficulties that arise during the global optimization task., AS is funded by MICINN (Spain) (BFU2008-0196). RA is partially supported by MICINN (Spain) through Grants BFU2007-62772/BMC and BFU2010-17704). AS and RA are members of the 2009SGR809 research group of the Generalitat de Catalunya. GG-G and CP acknowledges support from the Spanish Ministry of Science and Innovation (Projects DPI2008-04099 and CTQ2009-14420-C02-01) and the Spanish Ministry of External Affairs and Cooperation (Projects A/023551/09 and A/031707/10).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A survey of HK, HPt, and RR domains and their organization in two-component systems and phosphorelay proteins of organisms with fully sequenced genomes

  • Salvadó López, Baldiri
  • Vilaprinyo Terré, Ester
  • Sorribas Tello, Albert
  • Alves, Rui
Two Component Systems and Phosphorelays (TCS/PR) are environmental signal transduction cascades in prokaryotes and, less frequently, in eukaryotes. The internal domain organization of proteins and the topology of TCS/PR cascades play an important role in shaping the responses of the circuits. It is thus important to maintain updated censuses of TCS/PR proteins in order to identify the various topologies used by nature and enable a systematic study of the dynamics associated with those topologies. To create such a census, we analyzed the proteomes of 7,609 organisms from all domains of life with fully sequenced and annotated genomes. To begin, we survey each proteome searching for proteins containing domains that are associated with internal signal transmission within TCS/PR: Histidine Kinase (HK), Response Regulator (RR) and Histidine Phosphotranfer (HPt) domains, and analyze how these domains are arranged in the individual proteins. Then, we find all types of operon organization and calculate howmuch more likely are proteins that contain TCS/PR domains to be coded by neighboring genes than one would expect fromthe genome background of each organism. Finally, we analyze if the fusion of domains into single TCS/PR proteins is more frequently observed than one might expect from the background of each proteome. We find 50 alternative ways in which the HK, HPt, and RR domains are observed to organize into single proteins. In prokaryotes, TCS/PR coding genes tend to be clustered in operons. 90% of all proteins identified in this study contain just one of the three domains, while 8% of the remaining proteins combine one copy of an HK, a RR, and/or an HPt domain. In eukaryotes, 25% of all TCS/PR proteins have more than one domain. These results might have implications for how signals are internally transmitted within TCS/PR cascades. These implications could explain the selection of the various designs in alternative circumstances., This work was partially funded by Grant BFU2010-17704 from the Spanish MINECO and from small grants CMB and TR255 from University of Lleida to RA.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Two component systems: physiological effect of a third component

  • Salvadó López, Baldiri
  • Vilaprinyo Terré, Ester
  • Karathia, Hiren
  • Sorribas Tello, Albert
  • Alves, Rui
Signal transduction systems mediate the response and adaptation of organisms to environmental changes. In prokaryotes, this signal transduction is often done through Two Component Systems (TCS). These TCS are phosphotransfer protein cascades, and in their prototypical form they are composed by a kinase that senses the environmental signals (SK) and by a response regulator (RR) that regulates the cellular response. This basic motif can be modified by the addition of a third protein that interacts either with the SK or the RR in a way that could change the dynamic response of the TCS module. In this work we aim at understanding the effect of such an additional protein (which we call ‘‘third component’’) on the functional properties of a prototypical TCS. To do so we build mathematical models of TCS with alternative designs for their interaction with that third component. These mathematical models are analyzed in order to identify the differences in dynamic behavior inherent to each design, with respect to functionally relevant properties such as sensitivity to changes in either the parameter values or the molecular concentrations, temporal responsiveness, possibility of multiple steady states, or stochastic fluctuations in the system. The differences are then correlated to the physiological requirements that impinge on the functioning of the TCS. This analysis sheds light on both, the dynamic behavior of synthetically designed TCS, and the conditions under which natural selection might favor each of the designs. We find that a third component that modulates SK activity increases the parameter space where a bistable response of the TCS module to signals is possible, if SK is monofunctional, but decreases it when the SK is bifunctional. The presence of a third component that modulates RR activity decreases the parameter space where a bistable response of the TCS module to signals is possible., This work was partially supported by grants BFU2008-0196 to AS and BFU2010-17704 to RA, both from MICINN (Ministerio de Ciencia e Innovación, Spain). HK is funded by a Ph. D. fellowship and EV is funded by a Beatriu de Pinós Post-doctoral fellowship, both from AGAUR (Agència de Gestió d'Ajuts Universitaris i de Recerca, Catalunya). No additional external funding received for this study. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

CheNER: a tool for the identification of chemical entities and their classes in biomedical literature

  • Solsona Tehàs, Francesc
  • Alves, Rui
  • Usié Chimenos, Anabel
  • Cruz, Joaquim
  • Comas, Jorge
Background: Small chemical molecules regulate biological processes at the molecular level. Those molecules are often involved in causing or treating pathological states. Automatically identifying such molecules in biomedical text is difficult due to both, the diverse morphology of chemical names and the alternative types of nomenclature that are simultaneously used to describe them. To address these issues, the last BioCreAtIvE challenge proposed a CHEMDNER task, which is a Named Entity Recognition (NER) challenge that aims at labelling different types of chemical names in biomedical text. Methods: To address this challenge we tested various approaches to recognizing chemical entities in biomedical documents. These approaches range from linear Conditional Random Fields (CRFs) to a combination of CRFs with regular expression and dictionary matching, followed by a post-processing step to tag those chemical names in a corpus of Medline abstracts. We named our best performing systems CheNER. Results: We evaluate the performance of the various approaches using the F-score statistics. Higher F-scores indicate better performance. The highest F-score we obtain in identifying unique chemical entities is 72.88%. The highest F-score we obtain in identifying all chemical entities is 73.07%. We also evaluate the F-Score of combining our system with ChemSpot, and find an increase from 72.88% to 73.83%. Conclusions: CheNER presents a valid alternative for automated annotation of chemical entities in biomedical documents. In addition, CheNER may be used to derive new features to train newer methods for tagging chemical entities. CheNER can be downloaded from http://metres.udl.cat and included in text annotation pipelines., Funding for publication of this article comes from grants BFU2010-17704 and TIN2011-28689-C02-02 from the Spanish Ministry of Economy and Competitiveness.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Methods for and results from the study of design principles in molecular systems

  • Salvadó López, Baldiri
  • Karathia, Hiren
  • Usié Chimenos, Anabel
  • Vilaprinyo Terré, Ester
  • Omholt, Stig
  • Sorribas Tello, Albert
  • Alves, Rui
Most aspects of molecular biology can be understood in terms of biological design principles. These principles can be loosely defined as qualitative and quantitative features that emerge in evolution and recur more frequently than one would expect by chance alone in biological systems that perform a given type of process or function. Furthermore, such recurrence can be rationalized in terms of the functional advantage that the design provides to the system when compared with possible alternatives. This paper focuses on those design features that can be related to improved functional effectiveness of molecular and regulatory networks. We begin by reviewing assumptions and methods that underlie the study of such principles in molecular networks. We follow by discussing many of the design principles that have been found in genetic, metabolic, and signal transduction circuits. We concentrate mainly on results in the context of Biochemical Systems Theory, although we also briefly discuss other work. We conclude by discussing the importance of these principles for both, understanding the natural evolution of complex networks at the molecular level and for creating artificial biological systems with specific features., R.A. is partially supported by the Ministerio de Ciencia e Innovación (MICINN, Spain through Grants BFU2007-62772/BMC and BFU2010-17704) and by the FLAD foundation during a short stay at the Computational Biology Collaboratorium. E.V. is supported by a Beatriu de Pinós post doctoral fellowship from Generalitat de Catalunya. H.K. is supported by a Ph.D. fellowship from Generalitat de Catalunya. A.U. is supported by a Ph.D. fellowship from UdL. A.S. is supported by Grant BFU2008-0196 from MICINN. R.A., H.K., E.V. and A.S. are members of the Generalitat de Catalunya Research Group 2009 SGR 809.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An in vitro system for the rapid functional characterization of genes involved in carotenoid biosynthesis and accumulation

  • Bai, Chao
  • Rivera Vélez, Sol Maiam
  • Medina Piles, Vicente
  • Alves, Rui
  • Vilaprinyo Terré, Ester
  • Sorribas Tello, Albert
  • Canela i Garayoa, Ramon
  • Capell Capell, Teresa
  • Sandmann, Gerhard
  • Christou, Paul
  • Zhu, Changfu
We have developed an assay based on rice embryogenic callus for rapid functional characterization of metabolic genes. We validated the assay using a selection of well-characterized genes with known functions in the carotenoid biosynthesis pathway, allowing rapid visual screening of callus phenotypes based on tissue color. We then used the system to identify the functions of two uncharacterized genes: a chemically synthesized β–carotene ketolase gene optimized for maize codon usage, and a wild-type Arabidopsis thaliana ortholog of the cauliflower Orange gene. In contrast to previous reports (Lopez, A.B., Van Eck, J., Conlin, B.J., Paolillo, D.J., O'Neill, J. and Li, L. (2008) J. Exp. Bot. 59, 213–223; Lu, S., Van Eck, J., Zhou, X., Lopez, A.B., O'Halloran, D.M., Cosman, K.M., Conlin, B.J., Paolillo, D.J., Garvin, D.F., Vrebalov, J., Kochian, L.V., Küpper, H., Earle, E.D., Cao, J. and Li, L. (2006) Plant Cell 18, 3594–3605), we found that the wild-type Orange allele was sufficient to induce chromoplast differentiation. We also found that chromoplast differentiation was induced by increasing the availability of precursors and thus driving flux through the pathway, even in the absence of Orange. Remarkably, we found that diverse endosperm-specific promoters were highly active in rice callus despite their restricted activity in mature plants. Our callus system provides a unique opportunity to predict the effect of metabolic engineering in complex pathways, and provides a starting point for quantitative modeling and the rational design of engineering strategies using synthetic biology. We discuss the impact of our data on analysis and engineering of the carotenoid biosynthesis pathway., This study was supported by the Ministerio de Ciencia e Innovaci _on, Spain (AGL2010-15691, BFU2010-17704 and BIO2011-22525), the Generalitat de Catalunya (2009SGR809), and a European Research Council Advanced Grant (BIOFORCE). We thank Veronica Teixido and Jorge Comas (Department Cie` ncies Me` diques Ba` siques, Universitat de Lleida & Institut de Recerca Biomèdica de Lleida Edifici Recerca Biomèdica I, Avenida Alcalde Rovira Roure 80, 25198 Lleida, Spain) for assistance with the ImageJ analysis.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Saccharomyces cerevisiae as a model organism: a comparative study

  • Karathia, Hiren
  • Vilaprinyo Terré, Ester
  • Sorribas Tello, Albert
  • Alves, Rui
Background: Model organisms are used for research because they provide a framework on which to develop and optimize methods that facilitate and standardize analysis. Such organisms should be representative of the living beings for which they are to serve as proxy. However, in practice, a model organism is often selected ad hoc, and without considering its representativeness, because a systematic and rational method to include this consideration in the selection process is still lacking. Methodology/Principal Findings: In this work we propose such a method and apply it in a pilot study of strengths and limitations of Saccharomyces cerevisiae as a model organism. The method relies on the functional classification of proteins into different biological pathways and processes and on full proteome comparisons between the putative model organism and other organisms for which we would like to extrapolate results. Here we compare S. cerevisiae to 704 other organisms from various phyla. For each organism, our results identify the pathways and processes for which S. cerevisiae is predicted to be a good model to extrapolate from. We find that animals in general and Homo sapiens in particular are some of the non-fungal organisms for which S. cerevisiae is likely to be a good model in which to study a significant fraction of common biological processes. We validate our approach by correctly predicting which organisms are phenotypically more distant from S. cerevisiae with respect to several different biological processes. Conclusions/Significance: The method we propose could be used to choose appropriate substitute model organisms for the study of biological processes in other species that are harder to study. For example, one could identify appropriate models to study either pathologies in humans or specific biological processes in species with a long development time, such as plants., This work was partially financed by fellowships AP2002-2772 and Beatriu dePinós to EV. HK is funded by a Generalitat de Catalunya Ph. D. fellowship. RA was partially supported by the Ministerio de Ciencia e Innovación (MICINN, Spain through the Ramon y Cajal program and grants BFU2007-62772/BMC and BFU2010-17704) and by the FLAD foundation during a short stay. AS acknowledges financial support from grant BFU2008-0196 from MICINN. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Computer-assisted initial diagnosis of rare diseases

  • Alves, Rui
  • Piñol, Marc
  • Vilaplana Mayoral, Jordi
  • Teixidó Torrelles, Ivan
  • Cruz, Joaquim
  • Comas, Jorge
  • Vilaprinyo Terré, Ester
  • Sorribas Tello, Albert
  • Solsona Tehàs, Francesc
Introduction. Most documented rare diseases have genetic origin. Because of their low individual frequency, an initial diagnosis based on phenotypic symptoms is not always easy, as practitioners might never have been exposed to patients suffering from the relevant disease. It is thus important to develop tools that facilitate symptom-based initial diagnosis of rare diseases by clinicians. In this work we aimed at developing a computational approach to aid in that initial diagnosis. We also aimed at implementing this approach in a user friendly web prototype. We call this tool Rare Disease Discovery. Finally, we also aimed at testing the performance of the prototype. Methods. Rare Disease Discovery uses the publicly available ORPHANET data set of association between rare diseases and their symptoms to automatically predict the most likely rare diseases based on a patient’s symptoms. We apply the method to retrospectively diagnose a cohort of 187 rare disease patients with confirmed diagnosis. Subsequently we test the precision, sensitivity, and global performance of the system under different scenarios by running large scale Monte Carlo simulations. All settings account for situations where absent and/or unrelated symptoms are considered in the diagnosis. Results. We find that this expert system has high diagnostic precision (≥80%) and sensitivity (≥99%), and is robust to both absent and unrelated symptoms. Discussion. The Rare Disease Discovery prediction engine appears to provide a fast and robust method for initial assisted differential diagnosis of rare diseases. We coupled this engine with a user-friendly web interface and it can be freely accessed at http://disease-discovery.udl.cat/. The code and most current database for the whole project can be downloaded from https://github.com/Wrrzag/DiseaseDiscovery/tree/no_classifiers., This work was partially supported by the MEyC under contracts TIN2014-53234-C2- 2-R, TIN2011-28689-C02-02 and BFU2010-17704 and by Universitat de Lleida and Departament de Ciències Mèdiques Bàsiques with bridge grants to RA. The authors are members of the research groups 2014-SGR163 and 2014-SGR243, funded by the Generalitat de Catalunya.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Biblio-MetReS for user-friendly mining of genes and biological processes in scientific documents

  • Usié Chimenos, Anabel
  • Karathia, Hiren
  • Teixidó Torrelles, Ivan
  • Alves, Rui
  • Solsona Tehàs, Francesc
One way to initiate the reconstruction of molecular circuits is by using automated text-mining techniques. Developing more efficient methods for such reconstruction is a topic of active research, and those methods are typically included by bioinfor- maticians in pipelines used to mine and curate large literature datasets. Nevertheless, experimental biologists have a limited number of available user-friendly tools that use text-mining for network reconstruction and require no programming skills to use. One of these tools is Biblio-MetReS. Originally, this tool permitted an on-the-fly analysis of documents contained in a number of web-based literature databases to identify co-occurrence of proteins/genes. This approach ensured results that were always up-to-date with the latest live version of the databases. However, this `up-to- dateness' came at the cost of large execution times. Here we report an evolution of the application Biblio-MetReS that permits constructing co-occurrence networks for genes, GO processes, Pathways, or any combination of the three types of entities and graphically represent those entities.We show that the performance of Biblio- MetReS in identifying gene co-occurrence is as least as good as that of other com- parable applications (STRING and iHOP). In addition, we also show that the iden- tification of GO processes is on par to that reported in the latest BioCreAtIvE chal- lenge. Finally, we also report the implementation of a new strategy that combines on-the-fly analysis of new documents with preprocessed information from docu- ments that were encountered in previous analyses. This combination simultaneously decreases program run time and maintains `up-to-dateness' of the results., RA was partially supported by the Ministerio de Ciencia e Innovación (MICINN, Spain through grant BFU2010-17704). FS was partially funded by the MICINN, with grants TIN2011-28689-C02-02. The authors are members of the research groups 2009SGR809 and 2009SGR145, funded by the “Generalitat de Catalunya”. AU is funded by a Generalitat de Catalunya (AGAUR) PhD fellowship. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluating multi-locus phylogenies for species boundaries determination in the genus Diaporthe

  • Santos, Liliana
  • Alves, Artur
  • Alves, Rui
Background. Species identification is essential for controlling disease, understanding epidemiology, and to guide the implementation of phytosanitary measures against fungi from the genus Diaporthe. Accurate Diaporthe species separation requires using multi loci phylogernes. However, defining the optimal set of loci that can be used for species identification is still an open problem. Methods. Here we addressed that problem by identifying five loci that have been sequenced in 142 Diaporthe isolates representing 96 species: TEF1, TUB, CAL, HIS and ITS. We then used every possible combination of those loci to build, analyse, and compare phylogenetic trees. Results. As expected, species separation is better when all five loci are simultaneously used to build the phylogeny of the isolates. However, removing the ITS locus has little effect on reconstructed phylogenies, identifying the TEF1-TUB-CAL-HIS 4-loci tree as almost equivalent to the 5-loci tree. We further identify the best 3-loci, 2-loci, and 1-locus trees that should be used for species separation in the genus. Discussion. Our results question the current use of the ITS locus for DNA barcoding in the genus Diaporthe and suggest that TEF1 might be a better choice if one locus barcoding needs to be done., This work was financed by European Funds through COMPETE and by National Funds through the Portuguese Foundation for Science and Technology (FCT) within project PANDORA (PTDC/AGR-FOR/3807/2012 –FCOMP-01-0124-FEDER-027979). The authors received financing from FCT to CESAM (UID/AMB/50017/2013), Artur Alves (FCT Investigator Programme –IF/00835/2013) and a post-doctoral grant to Liliana Santos (SFRH/BPD/90684/2012), grants BFU2010-17704 from Ministerio de Ciencia e Innovación, 2009SGR809 from Generalitat de Catalunya, and bridge grants from the Dean for Research and the Departament de Ciències Mèdiques Bàsiques of the University of Lleida (Spain) to Rui Alves.