Pasar al contenido principal

ESTUDIO Y OPTIMIZACION DEL COMPORTAMIENTO HIGRO-TERMICO DE NUEVOS TIPOS DE BLOQUES HUECOS ELABORADOS EN BASE A HORMIGONES LIGEROS PARA SU EMPLEO EN SUELOS Y PAREDES

BIA2008-00058

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2008
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE OVIEDO
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nonlinear hygrothermal failure analysis of a masonry external wall by the FEM: A case study

  • Del Coz Diaz, Juan Jose
  • Lozano Martínez-Luengas, Alfonso
  • Martín Rodríguez, A.
  • Adam, Jose M|||0000-0002-9205-8458
This paper presents the case study of a detailed analysis of the failure of an external clay brick wall that had been built in 1995. The failure involved the collapse of a considerable part of the outer wall as well as sizeable cracks in the remainder. To determine the cause of the collapse, a preliminary investigation and field survey were carried out, followed by laboratory tests. The diagnosis from the data collected was supplemented by sophisticated non-linear finite element models, which considered both thermal and hygrothermal behaviour of the bricks with which the wall had been built. Moreover, a parametric study and a search for optimal value based on the design of experiments and goal optimisation analysis is done to obtain the hygrothermal behaviour of the existing wall. In this way, transforming our experience in numerical simulation into knowledge, the causes of the external wall failure have been determined. Next, the lessons drawn from the study are given in the final section. (C) 2010 Elsevier Ltd. All rights reserved., The authors acknowledge the partial financial support provided by the SV-09-GIJON-1-IUTA research fellowship and the Gijon City Council, and the Spanish Ministry of Science and Innovation through the research grant BIA2008-00058. We also thank to Swanson Analysis Inc. for the use of ANSYS Academic program. Finally, we also thank to the interesting comments of the suggested anonymous reviewers.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Collapse of a Masonry Wall in an Industrial Building: Diagnosis by Numerical Modeling

  • Coz Díaz, J. J. del
  • Lozano Martínez-Luengas, A.
  • Álvarez Rabanal, F. P.
  • Adam, Jose M|||0000-0002-9205-8458
This paper presents the analysis of a failure involving the partial collapse of a masonry wall made of precast concrete blocks in an industrial building as a result of the action of the wind. A field survey was carried out to investigate the origin of the failure, which pointed to defective building practices as the possible cause. At the same time, complementary numerical modeling was performed to simulate the coupled fluidstructure behavior, as well as a parametric study and optimization based on Design of Experiments (DOE) to determine the influence of the principal variables in the wall behavior in the presence of wind loads. The lessons learned in the course of the study are explained in the final section. DOI: 10.1061/(ASCE)CF.1943-5509.0000310. (C) 2013 American Society of Civil Engineers., The authors express deep gratitude to the GICONSIME Research Group at Oviedo University for their useful assistance. We thank Swanson Analysis Inc. for the use of ANSYS University Research program. This work was partially financed by the Spanish Ministry of Education and Science by means of the BIA2008-00058 Research Project and by the Gijon City Council by means of the scholarship granted to the student Abel Obeso Muniz, ref. SV-11-GIJON-4 IUTA.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimised method for estimating directional driving rain from synoptic observation data

  • Perez-Bella,J. M.
  • Dominguez-Hernandez,J.
  • Rodriguez-Soria,B.
  • Del Coz-Diaz,J. J.
  • Cano-Sunen,E.
In this article, the annual directional exposure to driving rain and its characteristics are analysed and discussed at four Spanish sites that are characterised by different rainfall levels and topographical and wind conditions. For this study, the present weather observation method is used, which is based on average annual rainfall data and synoptic observations of the present weather. The results of this study are compared with those obtained by applying the ISO 15927-3:2009 standard, which is based on the semi-empirical analysis of hourly wind and rainfall data. This study identifies the intrinsic dependence of the aforementioned synoptic method on the weather conditions that exist at each site, which affect the reliability and accuracy of the estimates. Thus, corrective changes that would enable the synoptic method to generate more reliable approximations are proposed, and a new optimised methodology is presented; the precision of the new method relies on synoptic observations but is independent of weather conditions. The results, validated at four Spanish sites, suggest that in the absence of hourly data for implementing the ISO standard, this optimised synoptic method is able to generate reasonably accurate estimates of the annual directional exposure to driving rain, regardless of the particular site conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Estimation of the exposure of buildings to driving rain in Spain from daily wind and rain data

  • Pérez-Bella, J. M.
  • Domínguez-Hernández, J.
  • Rodríguez-Soria, B.
  • Del Coz-Díaz, J. J.
  • Cano-Suñén, E.
In this study, the severity of the exposure of buildings in Spain to driving rain is estimated. The annual driving rain index (aDRI) is determined at 80 sites spread across Spain, based on wind and rain data recorded daily over 30 years. The comparison among the driving rain indices based on daily, monthly and annual climatic data, allows assessing the existence of co-occurrence errors and errors due to averaging. This work also introduces a new reference scalar index to characterise exposure to driving rain during the wetting stages of the building façades based on daily data. Therefore, a new approach to the concept of “spell” established by the ISO 15927-3:2009 standard is proposed. The combination of the two indices provides a qualitative characterisation based on two temporal criteria, supplementing the estimated exposure level currently set by the Spanish standard for the design of buildings. A driving rain map for Spain is produced. Those sites where exposure during periods of wetting is significant are identified (the northern part of the country, the Gulf of Cadiz and specific areas of the Mediterranean coast and the Canary Islands). An important annual exposure on the north and northwest coast of the country and a slightly lower exposure in coastal areas of the Gulf of Cadiz are also identified. The Mediterranean coast and the interior regions are considered to have a low annual exposure to driving rain. Finally, the major findings of this research are reported.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hygrothermal properties of lightweight concrete: Experiments and numerical fitting study

  • Del Coz Díaz, J.J.
  • Álvarez Rabanal, F. P.
  • Garcia Nieto, P. J.
  • Domínguez Hernández,J.
  • Rodríguez Soria, B.
  • Pérez-Bella, J. M.
This paper presents an experimental research work in order to obtain the main hygrothermal properties of different mixes of lightweight concrete (LWC) produced from expanded clay. Nowadays, the current state of art assumes an exponential relationship between the moisture content and the thermal properties for this kind of building material. The prime novelty of this study is the experimental determination of the actual hygrothermal properties for different LWC mixes with material densities ranging from 900 to 1400 kg/m3, as well as the least squares best-fitting curves in order to obtain accurate mathematical expressions that permit us to optimize the hygrothermal behavior of new construction products made up of LWC. In this way, the experimental data set is compared with those for the Standard and a new analytical solution is obtained, giving place to a new analytical solution taking into account the relationship among the heat, moisture and density. Finally, the results and conclusions reached in this work are exposed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The use of response surface methodology to improve the thermal transmittance of lightweight concrete hollow bricks by FEM

  • del Coz Diaz, J.J.
  • Garcia-Nieto,P.
  • Alvarez-Rabanall,F.
  • Alonso-Martínez,M.
  • Dominguez-Hernandez,J.
  • Perez-Bella,J.
n this paper, the response surface methodology (RSM) and finite element method (FEM) have been used to develop predictive models for the simulation and optimization of heat transfer process. The input variables were the material conductivity as well as the radiation emissivity, length and width of the recesses. The response variable considered was the thermal transmittance. In order to minimize the thermal transmittance, the RSM technique and FEM analyses have been developed in combination and applied to optimize this parameter. A central composite design (CCD) as the standard design of the RSM technique was used to evaluate the effects and interactions of the six previous factors. Next, the optimal design obtained from the RSM analysis is exposed, demonstrating its ability to build a quadratic polynomial model and to solve nonlinear thermal problems. Finally, analysis of variance (ANOVA) has been used to check the significance of response surface polynomials and FEM models so that the RSM technique was proved as an appropriate methodology for the nonlinear thermal optimization of lightweight concrete hollow bricks.