Pasar al contenido principal

ESTUDIO EXPERIMENTAL DEL COEFICIENTE DE ROZAMIENTO ENTRE DOVELAS PREFABRICADAS DE HORMIGON PARA PUENTES CON JUNTA SECA CONJUGADA

BIA2009-13056

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE CASTILLA-LA MANCHA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural system identification of cable-stayed bridges with observability techniques

  • Lozano Galant, José Antonio
  • Nogal, María
  • Turmo Coderque, José
  • Paya-Zaforteza, Ignacio
Cable-stayed bridges are highly statically redundant, light and flexible structures. This complexity highlights the role of the structural system identification (SSI) method in the calibration of the actual properties of the simplified models of these structures. This study proposes the first application of observability techniques to SSI of cable-stayed bridges. This method enables to define which subset of actual structural variables should be measured on site to identify mechanical properties, such as Young s modulus, area and inertia, or stiffnesses (EA and EI) of deck, pylon and stay cables. The effects of the inclination and inertia of the stay cables and the existence of pylon and deck cracking in the observability of different cable-stayed bridges are studied. The results obtained are validated by the models of actual cable-stayed bridges., The authors are indebted to the Secretary of State of the Spanish Ministry of Science and Innovation (Projects TRA2010-17818, BIA2009-10483 and BIA2009-13056) and to the Junta de Comunidades de Castilla-La Mancha (Project PII2I09-0129-4085) for partial support of this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the construction process of cable-stayed bridges built on temporary supports

  • Lozano-Galant, Jose A.
  • Paya-Zaforteza, I.
  • Xu, Dong
  • Turmo Coderque, José
The temporary supports erection method is a fast and economical way of building cable-stayed bridges. In this method the bridge deck is first erected on a set of temporary and permanent supports and then, the stays are successively placed and tensioned according to a predefined tensioning sequence. A proper definition and analysis of this sequence is very complex as the structure is highly statically indeterminate, exhibits a non linear behavior and has a changing static scheme.Despite its importance, no specific research referring to the modeling of the temporary support erection method has been found as most of the modeling procedures are proposed for the alternative erection technique, the cantilever erection method. The modeling carried out by most of these methods is based on the opposite construction sequence followed on site, this is to say, the structure is disassembled from the desired final stage (. Objective Completion Stage, . OCS).A procedure, the Backward Algorithm (. BA), is formally presented in this paper for calculation of the erection of cable-stayed bridges built on temporary supports. Because of its simplicity the . BA can be reproduced by any structural code that enables the modeling of the prestresses of the stays by means of imposed strains or imposed temperature increments. Another advantage is that no separate models are needed to calculate the evolution of stresses in the strands when the strand by strand tensioning technique is used. Furthermore, the stay elongations when prestressed can be easily obtained when the stays are prestressed in a single operation or strand by strand. This information is important to control the correct and safe prestressing of the stay on site. In addition, it also help the designer to control if the anchor wedge bites the strand in the same position several times during the prestressing process. © 2012 Elsevier Ltd., Part of this work was done through a collaborative agreement between University of Castilla-La Mancha (Spain) and Tongji University (China). This included an exchange of faculty and scholars. The financial support from Kwang-Hua Foundation from College of Civil Engineering of Tongji University and from the International Relation Office of University of Castilla-La Mancha is greatly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Forward Algorithm for the construction control of cable-stayed bridges built on temporary supports

  • Lozano-Galant, Jose A.
  • Paya-Zaforteza, I.
  • Xu, Dong
  • Turmo Coderque, José
Traditionally the construction process of cable-stayed bridges is modeled according to the backward approach, as its calculation is much easier using an elastic analysis. In this approach the bridge is disassembled according to the opposite sequence of events which occur during its erection. The main trade off of the backward approach is that time-dependent phenomena, such as creep, shrinkage or cable relaxation, cannot be directly computed as the analysis is performed according to the reversed time direction.In this paper the Forward Algorithm (FA) that is based on the forward approach is formally presented. This procedure has been applied to the temporary supports erection method as no specific investigation of this erection technique has been found by the authors. The FA has the following advantages: (1) Modifications in design and/or tensioning strategy can be easily computed. (2) The effect of time-dependent phenomena can be efficiently included into the calculation of the construction process of the bridge. (3) Differences between the temperatures in the structural elements assumed when doing the structural analysis of the bridge and the real ones when built can be calculated without the need of separate models. (4) The stresses in the mono-strands when the strand by strand prestressing technique is used are obtained directly. (5) Stay and strand elongation, which are very useful to control the prestressing operations, can be also easily computed. All these features make the FA an efficient procedure to control the construction process on site, increasing safety during construction and decreasing construction time. © 2012 Elsevier Ltd., Part of this work was done through a collaborative agreement between University of Castilla-La Mancha (Spain) and Tongji University (China). This included an exchange of faculty and scholars. The finantial support from Kwang-Hua Foundation from College of Civil Engineering of Tongji University and from the International Relation Office of University of Castilla-La Mancha is greatly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Direct simulation of the tensioning process of cable-stayed bridges

  • Lozano Galant, José Antonio
  • Xu, Dong
  • Paya-Zaforteza, I.
  • Turmo Coderque, José
This paper proposes a new and innovative algorithm, the Direct Algorithm (DA), which introduces, for the very first time, the unstressed length of the stays concept into the modeling of the construction process of cable-stayed bridges. This assumption enables a fast and direct simulation of construction stages by analyzing independent Finite Element Models when time-dependent phenomena are neglected. The computational speed and the limited computer storing requirements of the DA make it especially indicated for optimization problems. Furthermore, it can be implemented in any structural analysis software. (C) 2013 Elsevier Ltd. All rights reserved., Part of this work was done through a collaborative agreement between University of Castilla-La Mancha (Spain) and Tongji University (China). This included an exchange of faculty and scholars. The financial support from Kwang-Hua Foundation from College of Civil Engineering of Tongji University and from the International Relation Office of University of Castilla-La Mancha is greatly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modifications of the stress-state of cable-stayed bridges due to staggered construction of their superstructure

  • Lozano-Galant, Jose Antonio
  • Ruiz Ripoll, Lidia
  • Paya-Zaforteza I.
  • Turmo, José
In current practice, the effects of the evolutionary erection of cable-stayed bridge superstructure are rarely included into the simulation of its tensioning process. In fact, stay forces in service are usually defined in early stages of design, when the construction process has not even been conceived in detail yet. In order to fill this gap, the effects of the evolutionary erection of cable-stayed bridge superstructure throughout the tensioning process are studied in this paper. This study is focused on steel cable-stayed bridges erected on temporary supports. For the very first time a new criterion to include the effects of the evolutionary erection of cable-stayed bridges into the definition of the stay forces in the service state is presented., The authors wish to thank the Ministerio de Economia y Competitividad, the Ministerio de Ciencia e Innovacion and the Junta de Comunidades de Castilla-La Mancha (Spain) for the funding provided through the research projects BIA2013-47290-R, BIA2009-13056 and PII2I09-0129-4085 directed by Jose Turmo and founded with FEDER funds.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

New tool to help decision making in civil engineering

  • Castillo Ron, Enrique
  • Lozano Galant, José Antonio
  • Nogal Macho, María
  • Turmo Coderque, José|||0000-0001-5001-2438
Structural collapses have indirectly produced important progress in science. The last lesson learnt from structural collapses reveals the important role of polyrational systems of equations in the Civil Engineering field, as all problems in Physics and Engineering involving scale variables lead to systems of these equations. Since no efficient methods are known to solve this type of equations, a powerful and efficient method to multivariate polyrational equations using observability techniques is presented in this paper. It is pointed out that this method can be applied to solve different Civil Engineering problems. The information obtained by this tool can be used to assist decision making and risk management processes during maintenance and service life. As an example of its use, a structural damage detection problem is solved., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

New tool to help decision making in civil engineering

  • Castillo Ron, Enrique
  • Lozano Galant, José Antonio
  • Nogal Macho, María
  • Turmo Coderque, José
Structural collapses have indirectly produced important progress in science. The last lesson learnt from structural collapses reveals the important role of polyrational systems of equations in the Civil Engineering field, as all problems in Physics and Engineering involving scale variables lead to systems of these equations. Since no efficient methods are known to solve this type of equations, a powerful and efficient method to multivariate polyrational equations using observability techniques is presented in this paper. It is pointed out that this method can be applied to solve different Civil Engineering problems. The information obtained by this tool can be used to assist decision making and risk management processes during maintenance and service life. As an example of its use, a structural damage detection problem is solved., Peer Reviewed, Postprint (author's final draft)