Pasar al contenido principal

ESTUDIO EXPERIMENTAL Y NUMERICO DEL COMPORTAMIENTO SISMICO DE ESTRUCTURAS ESBELTAS DE MAMPOSTERIA REFORZADOS CON FRP: DISEÑO DE UN PROCEDIMIENTO DE REFUERZO FRENTE A SISMO

BIA2012-34316

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Relationship between static and dynamic elastic modulus of calcarenite heated at different temperatures: the San Julián's stone

  • Brotons, Vicente
  • Tomás, Roberto
  • Ivorra, Salvador
  • Grediaga, Angel
  • Grediaga, Angel|||/items/ef9b7077-b8d5-4ae1-8882-4bcd617ac621
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
The San Julián’s stone is the main material used to build the most important historical buildings in Alicante city (Spain). This paper describes the analysis developed to obtain the relationship between the static and the dynamic modulus of this sedimentary rock heated at different temperatures. The rock specimens have been subjected to heating processes at different temperatures to produce different levels of weathering on 24 specimens. The static and dynamic modulus has been measured for every specimen by means of the ISRM standard and ultrasonic tests, respectively. Finally, two analytic formulas are proposed for the relationship between the static and the dynamic modulus for this stone. The results have been compared with some relationships proposed by different researchers for other types of rock. The expressions presented in this paper can be useful for the analysis, using non-destructive techniques, of the integrity level of historical constructions built with San Julián’s stone affected by fires.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A preliminary approach of dynamic identification of slender buildings by neuronal networks

  • Ivorra, Salvador
  • Brotons, Vicente
  • Foti, Dora
  • Diaferio, Mariella
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
The study of the dynamic behavior of slender masonry structures is usually related to the preservation of the historic heritage. This study, for bell towers and industrial masonry chimneys, is particularly relevant in areas with an important seismic hazard. The analysis of the dynamic behavior of masonry structures is particularly complex due to the multiple effects that can affect the variation of its main frequencies along the seasons of the year: temperature and humidity. Moreover, these dynamic properties also vary considerably in structures built in areas where land subsidence due to the variation of the phreatic level along the year is particularly evident: the stiffness of the soil–structure interaction also varies. This paper presents a study to evaluate the possibility of detecting the variation of groundwater level based on the readings obtained using accelerometers in different positions on the structure. To do this a general case study was considered: a 3D numerical model of a bellower. The variation of the phreatic level was evaluated between 0 and −20 m, and 81 cases studies were developed modifying the rigidity of the soil–structure interaction associated to a position of the phreatic level. To simulate the dispositions of accelerometers on a real construction, 16 points of the numerical model were selected along the structure to obtain modal displacements in two orthogonal directions. Through an adjustment by using neural networks, a good correlation has been observed between the predicted position of the water table and acceleration readings obtained from the numerical model. It is possible to conclude that with a discrete register of accelerations on the tower it is possible to predict the water table depth.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Improved correlation between the static and dynamic elastic modulus of different types of rocks

  • Brotons, Vicente
  • Tomás, Roberto
  • Ivorra, Salvador
  • Grediaga, Angel
  • Martínez Martínez, Javier
  • Benavente, David
  • Gómez Heras, Miguel
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Grediaga, Angel|||/items/ef9b7077-b8d5-4ae1-8882-4bcd617ac621
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
The relationship between the static and dynamic elastic modulus in rock materials has been frequently addressed in scientific literature. Overall, when it comes to the study of materials with a wide range of elastic moduli, the functions that best represent this relationship are non-linear and do not depend on a single parameter. In this study, the relationships between the static and dynamic elastic modulus of eight different igneous, sedimentary and metamorphic rock types, all of which are widely used as construction material, were studied. To this end, the elastic modulus values of 33 samples were obtained which, together with the values obtained for 24 other samples in a previous study, allowed a new relationship between these parameters to be proposed. Firstly, linear and nonlinear classical models were used to correlate static and dynamic moduli, giving R2 of 0.97 and 0.99, respectively. A classical power correlation between static modulus and P-wave velocity has also been proposed, giving an R2 of 0.99 and a sum of the squared differences (SSE) of 553.93. Finally, new equations relating static and dynamic modulus values have been proposed using new nonlinear expressions. These consider: (a) bulk density (R2 = 0.993 and SSE = 362.66); (b) bulk density and total porosity of rock (R2 = 0.994 and SSE = 332.16); and (c) bulk density, total porosity of rock and uniaxial compressive strength (R2 = 0.996 and SSE = 190.27). The expressions obtained can be used to calculate the static elastic modulus using non-destructive techniques, in a broad range of rock materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Partial collapse of a ventilated stone façade: Diagnosis and analysis of the anchorage system

  • Ivorra, Salvador
  • Garcia-Barba, Javier
  • Mateo García, Mónica
  • Pérez-Carramiñana, Carlos
  • Maciá Mateu, Antonio
  • Garcia-Barba, Javier|||/items/adc2cd25-cf99-4501-ac85-125df89fe352
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
  • Maciá Mateu, Antonio|||/items/f31a0a33-5d88-40e8-8434-fee7c2688ef8
  • Pérez-Carramiñana, Carlos|||/items/a7e5cd14-92ec-4a84-bd29-0b3a37c7b3da
The mechanical behaviour of transventilated façades performed by natural stone is necessarily based on the correct execution of both anchoring elements on the stone cladding as in the ones corresponding to the enclosure support, either with brick masonry walls or reinforced concrete walls. In the case studied in the present work, the origin of the damages suffered on the façade of a building located in Alcoy has been analyzed, where the detachment of part of the outer enclosure occurred. This enclosure is a transventilated façade formed by Bateig Blue stone tiles. To this end, “in situ” tests of the anchoring systems employed have been performed, as well as laboratory tests of mechanical characterization of the material and of different types of anchor, comparing these results with those obtained in both the simplified analytical models of continuum mechanics as developed by the Finite Element Method (FEM).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Static and dynamic properties of retrofitted timber beams using glass fiber reinforced polymers

  • Bru, David
  • Baeza, F. Javier
  • Varona Moya, Francisco de Borja
  • Garcia-Barba, Javier
  • Ivorra, Salvador
  • Baeza, F. Javier|||/items/e40f041d-5b10-47fa-abd4-dd4fb5f526b6
  • Bru, David|||/items/00098396-76d2-44fc-8652-746908d86a33
  • Garcia-Barba, Javier|||/items/adc2cd25-cf99-4501-ac85-125df89fe352
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
  • Varona Moya, Francisco de Borja|||/items/b2f78412-2138-4bd9-a2e5-a9b3e391373e
A study on the static and dynamic properties of sawn timber beams reinforced with glass fiber-reinforced polymer (GFRP) is reported in this paper. The experimental program is focused on the behavior of unidirectional wooden slabs, and the main objective is to fulfill the service state limit upon vibrations using GFRP when an architectonical retrofitting project is necessary. Two different typologies of reinforcement were evaluated on pine wood beams: one applied the composite only on the lower side of the beams, while the other also covered half of the beams depth. For the dynamic characterization, the natural frequency, damping ratio, and dynamic elastic modulus were measured using two different techniques: experimental modal analysis upon the whole beams; and bandwidth method using smaller samples of the same material. The static characterization consisted of four point bending tests, where elastic modulus, bending strength and ductility were assessed. The lower composite had better ductility and bending strength. On the other hand, the U-shaped laminate showed higher stiffness but also at a higher material cost. However, it allowed some ductility, i.e. compressive plasticity, even in the presence of hidden knots. Both dynamic techniques gave similar results and were capable of measuring the structure stiffness, even if short samples were used. Finally, the changes on dynamic properties because of the GFRP did not jeopardize the dynamic performance of the reinforced timber beams.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Seismic behavior of a masonry chimney with severe cracking condition: preliminary study

  • Ivorra, Salvador
  • Baeza, F. Javier
  • Bru, David
  • Varona Moya, Francisco de Borja
  • Baeza, F. Javier|||/items/e40f041d-5b10-47fa-abd4-dd4fb5f526b6
  • Bru, David|||/items/00098396-76d2-44fc-8652-746908d86a33
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
  • Varona Moya, Francisco de Borja|||/items/b2f78412-2138-4bd9-a2e5-a9b3e391373e
This paper presents a structural analysis of a masonry chimney built in the 1940s, which is currently being cataloged as local interest heritage. This structure has not served any industrial purpose for the last thirty years. The chimney is located in the town of Agost (Alicante - Spain) and directly exposed to the prevailing winds from the sea, as it is approximately 12 km away from the waterfront and there are not any significant barriers, which could protect the structure against the wind. There are longitudinal cracks and fissures all along the shaft because of the chimney’s geometrical characteristics, the effect of the masonry creep and especially the lack of maintenance. Moreover, there is also a permanent bending deformation in the upper 1/3 of the height due to the wind pressure. A numerical analysis for the static behavior against gravity and wind loads was performed using the structure’s current conditions after a detailed report of its geometry, its construction system and the cracking pattern. Afterwards, the dynamic behavior was studied, i.e. a seismic analysis using both response spectra and accelerograms in order to examine the structural stability. This work shows the pre-monitoring analysis before any experimental testing. Using the current results the future test conditions will be determined (e.g. number of sensors and monitoring point location, excitation systems, etc) prior to a possible structural reinforcement by applying composite material (fiber reinforced polymers).