Pasar al contenido principal

MEJORA DEL COMPORTAMIENTO RESISTENTE FRENTE A ALTAS TEMPERATURAS DE VIGAS MIXTAS "SLIM-FLOOR" CON MATERIALES AVANZADOS

BIA2015-67492-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fire design of slim-floor beams, Brandbemessung von Slim-Floor-Trägern

  • Romero, Manuel L.|||0000-0001-5247-4767
  • Albero, V|||0000-0001-7193-9232
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
[DE] Die Slim-Floor-Bauweise ist eine erprobte und wirtschaftliche Lösung. Sie ermöglicht unter anderem eine erhebliche Reduzierung der Deckenstärke und wird zunehmend in Industrieund Gewerbegebäuden eingesetzt. Darüber hinaus erzielen Slim-Floor-Träger, da sie größtenteils in die Decke integriert sind und somit nur die untere angeschweißte Platte direkt einem Brand ausgesetzt wird, einen wesentlich höheren Feuerwiderstand als etwa klassische Verbundträger. In Eurocode 4 Teil 1-2 finden sich zwar vereinfachte Methoden zur Bestimmung der Bauteiltemperaturen von Verbundträgern mit und ohne Kammerbeton, jedoch gibt diese Norm keine vereinfachte Methode zur Bestimmung der Temperaturen eines Slim-FloorQuerschnitts an. In den letzten Jahren wurden vereinfachte Modelle zur Bestimmung der Temperaturverteilung von SlimFloor-Querschnitten entwickelt. Diese derzeit verfügbaren Modelle liefern Ergebnisse auf der sicheren Seite und können für eine praktische Anwendung durchaus empfohlen werden. In diesem Artikel wird gezeigt, dass Slim-Floor-Träger während eines Brandereignisses eine exzellente Tragfähigkeit besitzen. Insbesondere können für Ausnutzungsgrade von 0,5 bis 0,6 die Anforderungen an die Feuerwiderstandsklasse R60 erfüllt werden. Die Feuerwiderstandsklassen R90 und R120 können durch Anwendung innovativer Lösungen, durch verbesserte Materialien oder auch passiven Brandschutz erfüllt werden., [EN] Slim-floor beams are a well-known and cost-effective solution that permits a significant reduction of floor thickness, and are increasingly used in industrial and commercial buildings. Since only their lower flange is exposed to fire, slim-floor beams may also achieve higher fire resistance, in comparison to other types of composite beams that are not fully embedded in the concrete floor. Simplified models are available in Eurocode 4 Parts 1-2 to evaluate the temperature distribution for partially encased and non-encased composite beams. However this standard does not provide any simplified model to evaluate the cross-sectional temperature field of slim-floor beams. In this sense, different proposals have been evaluated in recent years in order to provide simplified models for temperature evaluation. The currently available models in the literature have shown their accurate behaviour providing results on the safe side, and are recommended for use in practice. Finally, this work shows that slim-floor composite beams can provide good performance during a fire event. Specifically, 60 min of standard fire rating can be achieved for load levels lower than 0.5-0.6. Improved behaviour to achieve 90 or 120 min of standard fire exposure may also be reached by using innovative solutions, advanced materials or external protection.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Internally fire protected composite steel-concrete slim-floor beam

  • Albero, V|||0000-0001-7193-9232
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Romero, Manuel L.|||0000-0001-5247-4767
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
  • Serra Mercé, Enrique
[EN] The slim-floor beam is a composite concrete-steel beam fully integrated into the floor depth that was developed at the beginning of the 1990s. This composite beam presents a very good behaviour during the fire event because most of the steel parts of the section remain protected by the concrete encasement. Indeed, in a fire event, only the bottom surface of the lower steel plate results exposed to the heat source. The use of intumescent coating or other fireproof materials is the most common way to insulate the steel beam from fire but requires an accurate application and also appropriate maintenance during its whole life cycle to ensure proper fire protection. Thus, related to this last idea, the objective of this work is to present a new slim-floor configuration which increases the insulation of the beam from fire by using a design strategy that avoids the needed for maintenance. This new beam configuration has been called "Internally Fire Protected Slim-Floor Beam" (IFP-SFB) and implies a thermal break included within the beam cross-section. This paper presents the results of a series of thermal tests applied to this innovative slim-floor type proposed by the authors and its comparison against the most commonly used slim-floor configurations. Finally, the benefits of the proposed IFP-SFB configuration are presented, resulting in up to 30-60 min of additional fire resistance time. The IFP-SFB configuration is at present right-protected and under evaluation by the Spanish Office of Patents and Trademarks with reference number P201930438., The authors would like to express their sincere gratitude to the Spanish "Ministerio de Economia y Competitividad" for the help provided through the Project BIA2015-67192-R and to the European Union through the FEDER funds. The here presented "Internally Fire Protected Slim-Floor Beam" (IFPSFB) configuration is currently right-protected and under evaluation by the Spanish Office of Patents and Trademarks with the reference number P201930438 and with publication number ES2732719 A1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Innovative solutions for enhancing the fire resistance of slim-floor beams: Thermal experiments

  • Albero, V|||0000-0001-7193-9232
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Romero, Manuel L.|||0000-0001-5247-4767
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
  • Serra Mercé, Enrique
[EN] Slim-floor beams have attracted the attention of designers in the last decades, owing to their ability for supporting intermediate loads without increasing the floor thickness. However, the behaviour of this type of beams at elevated temperatures has not been well understood yet. This paper presents the results of an experimental campaign carried out at the testing facilities of the Universitat Politecnica de Valencia, Spain, where a series of slim-floor configurations were exposed to elevated temperatures into an electrical furnace. These tests had the novelty of considering different slim-floor beam typologies, as well as alternative ways for thermal protection, such as using intumescent coating, stainless steel or lightweight concrete into different cross-section parts. The test results were used to validate a finite element thermal model which allows for a detailed analysis of the cross-section thermal behaviour and the assessment of different ways to improve the slim-floor beam fire performance. The temperature results were subsequently imported into a computer code developed by the authors where a non-linear procedure was applied to obtain the plastic bending capacity of the cross-section at elevated temperatures. These final results reveal the different thermal performance of the analysed configurations and are used as a basis for providing design recommendations for future slim-floor developments., The authors would like to express their sincere gratitude to the Spanish "Ministerio de Economia y Competitividad" for the help provided through the Project BIA2015-67192-R and to the European Union through the FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical study on the flexural behaviour of slim-floor beams with hollow core slabs at elevated temperature

  • Albero, V|||0000-0001-7193-9232
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Romero, Manuel L.|||0000-0001-5247-4767
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
  • Serra Mercé, Enrique
[EN] Slim-floor beams are a novel typology of steel beams where the steel profile is fully embedded within the concrete floor depth. While the use of this system is increasing fast in the construction practice, the available investigations on its fire performance are still scarce. This paper focuses on analysing the fire behaviour of slim floor beams combined with hollow core slabs as flooring system. Two configurations are studied, namely Integrated Floor Beam (IFB) and Shallow Floor Beam (SFB). A finite element model is developed and validated by comparison with experimental results available in the literature as well as with thermal tests carried out by the authors. Subsequently, parametric studies are conducted with the aim of providing practical design recommendations. The influence of the composite beam configuration, concrete type, longitudinal reinforcement and steel plate thickness is studied. The conclusions drawn in this paper suggest that the SFB configuration may provide a significant enhancement in terms of fire resistance compared to IFB, provided that the appropriate combination of the parameters studied is used., The authors would like to express their sincere gratitude to the Spanish "Ministerio de Economia y Competitividad" for the help provided through the Project BIA2015-67192-R and to the European Union through the FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Análisis experimental del comportamiento frente a altas temperaturas de vigas planas mixtas de acero-hormigón con materiales avanzados

  • Serra Mercé, Enrique
[EN] Composite steel-concrete beams embedded in the slab (slim-floor) are being increasingly used worldwide in new residential industrial and commercial building projects, as well as in unique infrastructures. However, the current standard design codes applicable in Europe, present several shortcomings. One of the most significant limitations is related to the calculation under fire exposure, where there is a lack of clear design guidance. In addition, many high-performance steels are beginning to be commercialized internationally. The use of these steels, in combination with the use of lightweight concrete with lower thermal conductivity, may significantly increase the fire resistance of this type of beams without the need of using an external protection, hence reducing the carbon footprint at the same time. This thesis suggests the use of a particular section typology (HEB + welded bottom plate) that improves the safety of the current composite beam systems, allowing for different types of steels to be arranged in the section. Plain carbon steels (S275 or S355) can be used for the main profile, while the high-performance steels (HSS or SS) would be employed only on the lower part of the beam. This will allow to balance out the problem of loss of resistance that these beams present when exposed to elevated temperatures, while reducing their cost. To this aim, a first experimental campaign is developed through eight tests, where the distribution of temperatures is analyzed in detail, as the composite beams are being subjected to the action of fire. Subsequently, an innovative solution, originated during the study of the results of this first group of experiments, is produced. This innovation is based on the insertion of an insulating material in the gap generated between the steel profile and the bottom plate (patent P201930438). To prove its novelty, a second and more reduced experimental campaign was developed. It can be concluded that some of the composite beams configured in this thesis are more sustainable, innovative, and provide competitive solutions for residential, industrial or commercial buildings. The use of new materials in embedded steel profiles is proposed in this thesis, as an alternative to the use of classical fire protection solutions (intumescent coatings or sprayed mortars), providing a solution with a better external finish and without the need for maintenance during its service life, which results in the reduction of the associated environmental impact., [ES] Las vigas mixtas de acero y hormigón embebidas en el forjado, slim-floor, están siendo cada vez más utilizadas a nivel internacional en las nuevas propuestas de edificación tanto residencial, industrial o comercial, así como en infraestructuras singulares. Sin embargo, los códigos de diseño actuales aplicables en Europa, presentan algunas carencias. Una de las más importantes es respecto a su diseño para resistencia al fuego, para el que no existe una guía clara. Por otra parte, algunos aceros especiales, como los aceros inoxidables (SS) o de alta resistencia (HSS), están empezando a comercializarse a nivel internacional. El empleo de estos aceros, en combinación con la utilización de hormigones ligeros de menor difusividad térmica, puede llegar a incrementar significativamente la resistencia frente al fuego de este tipo de vigas sin necesidad de utilizar una protección externa, reduciendo así, a la vez, la huella de carbono. En esta tesis se sugiere la utilización de una tipología particular de sección (HEB + chapa inferior soldada) que mejora la seguridad de los sistemas de viga mixta actuales, permitiendo disponer diferentes tipos de aceros en la sección. Pueden utilizarse aceros normales (S275 o S355) en el perfil principal, mientras que los aceros de altas prestaciones se dispondrían preferentemente en la parte inferior de la sección. Esto permitiría contrarrestar los problemas de pérdida de resistencia frente a altas temperaturas que presentan estas vigas, reduciendo a la vez su coste. Para ello, se desarrolla una campaña de experimentos con ocho ensayos, donde se analiza en detalle la distribución de temperaturas cuando se somete a las vigas mixtas a la acción del fuego. Posteriormente, se presenta una solución innovadora originada durante el estudio de los resultados de los primeros experimentos, que consiste en la interposición de un material de aislamiento térmico en el hueco generado entre el perfil de acero y la chapa inferior (patente P201930438). Para demostrar su novedad, se desarrolla una segunda campaña de ensayos, más reducida. Se puede concluir que las vigas mixtas que se plantean en la presente tesis son soluciones sostenibles, innovadoras y competitivas para edificación residencial, industrial o comercial. El uso de perfiles de acero embebidos propuesto en esta tesis se plantea como una alternativa frente al empleo de soluciones clásicas de protección pasiva (pinturas intumescentes o morteros de proyección), proporcionando una solución con un mejor acabado externo y sin necesidad de mantenimiento durante su vida en servicio, lo cual redunda en la reducción del impacto ambiental asociado., [CA] Les bigues mixtes acer-formigó embegudes en el forjat, slim-floor, són cada vegada més utilitzades a nivell internacional en les noves propostes d'edificació tant residencial, industrial, comercial, com d'infraestructures singulars. No obstant això, els codis de disseny actuals aplicables a Europa, presenten diverses manques. Una de les més importants és respecte al dimensionament enfront el foc, on no existeix una guia de disseny clara D'altra banda, la utilització d'acers especials, com els acers inoxidables (SS) o d'alta resistència (HSS) estan començant a comercialitzar-se a nivell internacional. L'ús d'aquests acers en combinació amb la utilització de formigons lleugers de menor conductivitat, pot arribar a incrementar significativament la resistència al foc d'aquest tipus de bigues sense la necessitat d'utilitzar protecció externa, reduint alhora la petjada de carboni. En aquesta tesi es proposa la utilització d'una tipologia de secció mixta (HEB + xapa inferior soldada) que millora la seguretat dels sistemes actuals, permetent disposar diferents tipus d'acers en la secció, els acers comuns (S275 o S355) en el perfil principal i els acers especials només en la part inferior. Això permetria contrarestar els problemes de pèrdua de resistència enfront d'altes temperatures que presenten aquestes bigues reduint alhora el seu cost. Per a això es desenvolupa una campanya experimental amb huit assajos on s'analitza detalladament la distribució de temperatures sota l'acció del foc. Posteriorment, es presenta una solució innovadora originada durant l'estudi dels resultats de la primera campanya experimental i que consisteix en la interposició d'un material protector en el buit generat entre el perfil i la xapa d'acer (patent P201930438). Per a demostrar la seua novetat, es desenvolupa una segona campanya experimental més reduïda. Es pot concloure que, les bigues mixtes que es plantegen en el present projecte són solucions sostenibles, innovadores i competitives per a edificació residencial, industrial o comercial. L'ús de perfils d'acer embeguts proposat en aquesta tesi es planteja com una alternativa enfront de l'ús de solucions clàssiques (pintures intumescents o morters de projecció), proporcionant una solució amb un millor acabat extern i sense necessitat de manteniment durant la seua vida en servei, la qual cosa redunda en la reducció de l'impacte ambiental associat.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recent developments and fire design provisions for CFST columns and slim-floor beams

  • Romero, Manuel L.|||0000-0001-5247-4767
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Lapuebla-Ferri, Andrés|||0000-0001-9667-236X
  • Albero, V|||0000-0001-7193-9232
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
[EN] This paper summarizes the latest technical and scientific progresses on steel-concrete composite structures exposed to fire, presenting the recent research carried out on this subject and the progress of the design codes. In particular, this review focuses on concrete-filled steel tubular columns and slim-floor beams, topics where the authors have carried out extensive research during the last years. The more recent experimental and numerical studies performed by the authors as well as those available in the literature are presented, along with applications where these composite elements have been used in practice. The use of advanced materials, such as high strength steel and concrete, stainless steel, lightweight concrete or geopolymer concrete is considered for the enhancement of the fire behaviour of concrete-filled steel tubular columns and slim-floor beams. Finally, the currently available design methods for the calculation of isolated members at elevated temperatures are reviewed and the recent progress of the code provisions for the fire design of these composite elements is presented., The authors would like to express their sincere gratitude to the Spanish "Ministerio de Economia y Competitividad" for the help provided through the Project BIA2015-67192-R and to the European Union through the FEDER funds.