Pasar al contenido principal

DISTRITOS DE BALANCE ENERGETICO NULO MEDIANTE ALGORITMOS DE CONFORT ADAPTATIVO Y GESTION OPTIMA DE REDES ENERGETICAS

BIA2016-77431-C2-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Decision-making approach: A simplified model for energy performance evaluation of photovoltaic modules

  • Guerrero Delgado, MCarmen
  • Sanchez Ramos, José
  • Rodríguez Jara, Enrique Ángel
  • Molina Félix, José Luis
  • Álvarez Domínguez, Servando
Los modelos existentes que caracterizan el desempeño de módulos fotovoltaicos para su integración en programas de simulación no están basados para su definición en los datos que están realmente disponibles en los catálogos técnicos de los fabricantes. En esta aportación se presenta un modelo simplificado para caracterizar el comportamiento de módulo fotovoltaicos usando directamente los datos disponibles en dichos catálogos. Para ellos se tomó una muestra de 259 módulos de diferentes marcas, tamaños y tecnologías bajo diferentes condiciones de operación. El modelo resultante es suficientemente preciso y fácil de integrar en programas de simulación.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Gas engine heat pump system: Experimental facility and thermal evaluation for 5 different units

  • Sánchez Ramos, José
  • Guerrero Delgado, M. Carmen
  • Álvarez Domínguez, Servando
  • Molina Féliz, José Luis
  • Cabeza, Luisa F.
Gas Engine Heat Pump requires simplified characterization models that allow evaluating its economic and energy impacts. These simplified solutions can be implemented in complex simulation algorithms for different commercial solutions with a low computational cost. The study aims to develop a simplified characterization model highly accurate, easy to reproduce and apply. The methodology carried out uses an experimental installation to analyze different units tested under different operating conditions. With the results of the carried out experimentation, it will be possible to know the real thermal response of these HVAC systems and to develop the simplified characterization model based on operating curves. The thermal behaviour of the systems could be evaluated using the defined curves under any operating condition of the GEHP system. Moreover, they are based on parameters available in the manufacturer datasheets. The results of the validation show that this model is highly accurate. It has a maximum error of 25% and an average error of less than 7%. Also, the formulation shows that it is easy to reproduce and to apply. Last, uncertainty analysis shows reasonable confidence in the identified performance curves., The authors would like to take this opportunity to thank SEDIGAS (the Spanish Gas Association) and manufactured companies (PANASONIC and AISIN) for our fruitful long-term cooperation to promote the deregulation of the market and its role as a critical element in the economic development and quality of life of future generations. Finally, the DACAR project “Zero-Energy Balance Districts Through Algorithms of Adaptive Comfort and Optimal Management of Energy Networks” (BIA2016-77431-C2-2-R) funded by Ministry of Economy and Competitiveness (Government of Spain) and European Regional Development's funds of European Comission (ERDF) for its partial support.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Potential of energy flexible buildings: Evaluation of DSM strategies using building thermal mass

  • Sánchez Ramos, José
  • Pavón Moreno, M. Carmen
  • Guerrero Delgado, M. Carmen
  • Álvarez Domínguez, Servando
  • Cabeza, Luisa F.
Energy flexible buildings through smart demand-side management (DSM) or smart demand response (DR) using efficient energy storage, are currently one of the most promising options to deploy low-carbon technologies in the electricity networks without the need of reinforcing existing networks. Although, many ignore the potential, economic and energetic benefits these alternatives could hold for buildings, users and tariffs. In the study carried out a control system of demand management measures is analyzed, based on the use of the buildings' thermal mass as thermal storage (preheating, precooling and night ventilation). This demand management system is analyzed in five existing residential buildings in the so-called reference scenario (construction, user and current prices). Subsequently, comes the analysis of the optimal manage- ment strategy choice from the system, when facing changes in the housings' constructive characteristics and electric tariffs. The dynamism of the management system stands out from the results achieved, as well as the de- pendence of the possible strategy choices on the climate zones. In the reference situation, the maximum economic savings obtained after the implementation of the management system correspond to 3.2% for heating and 8.5% for cooling. In this same manner, when the buildings are previously rehabilitated, the savings can double even generating energy savings. Finally, it can be concluded that the low installation costs of these measures make them a winning solution, as long as the electric pricing and user behavior allow the required flexibility., The authors would like to take this opportunity to thank the DACAR project “Zero-Energy Balance Districts Through Algorithms of Adaptive Comfort and Optimal Management of Energy Networks” (BIA2016-77431-C2-2-R) funded by Ministry of Economy and Competitiveness (Government of Spain) and European Regional Development's Funds (ERDF) for its partial support. And the University of Seville under its Research Plan VI (VPPI-US).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Building thermal storage technology: Compensating renewable energy fluctuations

  • Guerrero Delgado, M. Carmen
  • Sánchez Ramos, José
  • Álvarez Domínguez, Servando
  • Tenorio, José Antonio
  • Cabeza, Luisa F.
Emerging technologies and new intelligent management systems will be needed to rise to the energy challenges posed by buildings today. Thermally activated building systems (TABS) are attracting growing interest on the back of their energy savings potential. The TABS studied in this article, a new prefabricated panel designed for installation in residential building façades, was characterised by the high thermal inertia afforded by the phase change materials in its composition. The design and assessment of the potential savings derived from TABS require specific characterisation methodologies to estimate the amount of useful energy available to control the indoor environment. A two-stage approach was adopted for the TABS studied here with ``ideal'' operating control (the building is assumed to be at a constant desired temperature). The first stage involved a simplified method for characterising system behaviour based on performance maps developed from CFD simulations. Such maps can be used to quickly assess changes in system energy performance following on variations in design and operating parameters. In the second, the TABS was integrated into a building with a simplified model to assess monthly energy demand to evaluate the system potential for energy savings in representative types of Spanish single-family housing in different climate zones. The first-stage findings showed that given the system significant inertia, it discharged for several days, even when charging occurred only on the first, ensuring a wide operating range adaptable to renewable resource limitations. The analysis of potential, in turn, revealed that savings of over 40% in heating demand are possible even under the least favourable circumstances., This study was funded by Spanish Ministry of Economy and Competitiveness under the INPHASE (RTC-2015-3583-5) and DACAR (BIA2016-77431-C2-2-R), the European Regional Development Fund (ERDF) and the University of Seville under its Research Plan VI (VPPI-US). Prof. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of the refurbishment of historic buildings with a cost-optimal methodology: a case study

  • Sánchez-Ramos, José
  • Álvarez, Servando
  • Pavón Moreno, M. Carmen
  • Guerrero Delgado, M. Carmen
  • Romero Rodríguez, Laura
  • Tenorio Ríos, José Antonio
This article belongs to the Special Issue Zero-Energy Buildings., The transformation of existing buildings into Near Zero Energy Buildings or even positive energy buildings remains a major challenge. In particular, historic buildings are an important cultural heritage that, in most cases, may be rehabilitated and reused for new purposes. However, achieving higher efficiencies in those buildings presents many difficulties, since there is a need to preserve aesthetic values and minimize impact on the buildings’ initial construction. In this work, a roadmap that allows rehabilitating a building from the eighteenth century is developed, turning it into a landmark building, to be used as a museum in the near future. The procedure is based on 3D models using REVIT software and detailed energy simulations supported by a cost-optimal methodology. The results reveal how conventional methodologies shown in the literature may improve the energy performance of the buildings during the heating regime, but performance may deteriorate during the cooling season. For that reason, the present study includes the design of a night ventilation system which allows not only solving this problem but also to reducing the cooling demands by more than 43% with little additional costs. In conclusion, historic buildings (which traditionally have a high thermal mass) have increased thermal storage potential by using the structures of the buildings themselves as well as passive cooling techniques., The authors would like to take this opportunity to thank the DACAR project (Distritos de Balance Energético Nulo Mediante Algortimos de Confort Adaptativo y Gestión Óptimo de Redes Energéticas BIA2016-77431-C2-2-R), funded by Ministry of Economy and Competitiveness of Government of Spain (within the National Program for Research Aimed at the Challenges of Society, included in the framework of the Spanish National Plan for Scientific and Technical Research and Innovation) and European Regional Development’s funds (ERDF) for its partial support. The authors also thank the University of Seville for its financial support through the US Research Plan VI (VPPI-US)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Systematic simplified simulation methodology for deep energy retrofitting towards Nze targets using life cycle energy assessment

  • Sánchez-Ramos, José
  • Guerrero Delgado, M. Carmen
  • Álvarez, Servando
  • Molina Félix, José Luis
  • Sánchez de la Flor, Francisco José
  • Tenorio Ríos, José Antonio
This article belongs to the Special Issue Life Cycle Energy Assessment on Buildings., The reduction of energy consumption in the residential sector presents substantial potential through the implementation of energy efficiency improvement measures. Current trends involve the use of simulation tools which obtain the buildings’ energy performance to support the development of possible solutions to help reduce energy consumption. However, simulation tools demand considerable amounts of data regarding the buildings’ geometry, construction, and frequency of use. Additionally, the measured values tend to be different from the estimated values obtained with the use of energy simulation programs, an issue known as the ‘performance gap’. The proposed methodology provides a solution for both of the aforementioned problems, since the amount of data needed is considerably reduced and the results are calibrated using measured values. This new approach allows to find an optimal retrofitting project by life cycle energy assessment, in terms of cost and energy savings, for individual buildings as well as several blocks of buildings. Furthermore, the potential for implementation of the methodology is proven by obtaining a comprehensive energy rehabilitation plan for a residential building. The developed methodology provides highly accurate estimates of energy savings, directly linked to the buildings’ real energy needs, reducing the difference between the consumption measured and the predictions., The authors would like to take this opportunity to thank the DACAR project “Zero-Energy Balance Districts Through Algorithms of Adaptive Comfort and Optimal Management of Energy Networks” (BIA2016-77431-C2-2-R) funded by Ministry of Economy and Competitiveness (Government of Spain) and European Regional Development’s funds (ERDF) for its partial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Evaluation of the behavior of an innovative thermally activated building system (TABS) with PCM for an efficient design

  • Guerrero Delgado, M. Carmen
  • Sánchez, José
  • Álvarez, Servando
  • Tenorio Ríos, José Antonio
  • Cabeza, Luisa F.
  • Bartolomé, Cesar
  • Pavón Moreno, M. Carmen
Trabajo presentado al CLIMA Congress , celebrado en Bucharest (Romania) del 26 al 29 de mayo de 2019., The global energy crisis has caused a double effect. On the one hand, users are increasingly aware of the energy cost they face. On the other hand, public administrations have become aware of the importance of limiting energy consumption in buildings as a way to combat climate change and reduce the energy dependence with the climate. This situation supposes a great opportunity for innovative constructive solutions with an energetic behaviour that surpasses the traditional approach of reduction of the transmittance. In this work, studies are presented to obtain potential of a new solution thermally activated with two innovations with respect to those existing in the market: its activation is done by hot / cold water produced by renewable systems; and its concrete structural element in addition to having coupled the heat exchanger presents an innovative mortar doped with PCM microencapsulated phase change material., The authors would like to take this opportunity to thank the DACAR project “Zero-Energy Balance Districts Through Algorithms of Adaptive Comfort and Optimal Management of Energy Networks” (BIA2016-77431-C2-2-R) funded by Ministry of Economy and Competitiveness (Government of Spain) and European Regional Development's funds (ERDF) for its partial support. The authors also thank the University of Seville for its financial support through the US Research Plan VI (VPPI-US)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Cartuja Qanat. Recuperando la vida en la calle en un mundo de cambio climático, Cartuja Qanat. Recovering street life

  • Caro Gómez, Esperanza
  • Rodríguez Catalán, Leonor
  • Álvarez, Servando
  • Sánchez-Ramos, José
  • Guerrero Delgado, M. Carmen
  • Tenorio Ríos, José Antonio
Trabajo presentado al la 14ª edición del Congreso Nacional del Medio Ambiente (CONAMA): "Rumbo 20.30", celebrado en el Palacio de Congresos de Madrid del 26 al 29 de noviembre de 2018., CartujaQanat es un proyecto de transformación urbana innovador a través del cual se fomentará el uso de la calle como dinamizador social, mejorándola e involucrando en esa transformación a todo el ecosistema de la ciudad (agentes públicos, privados y ciudadanos)., The authors would like to take this opportunity to thank Urban Innovative Actions (UIA) and European Regional Development's funds (ERDF) for its partial support; and the DACAR project -Energy Balance Districts Through Algorithms of Adaptive Comfort and Optimal Management of Energy (BIA2016-77431-C2-2-R) funded by Ministry of Economy and Competitiveness (Government of Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Building thermal storage technology: Compensating renewable energy fluctuations

  • Guerrero Delgado, M. Carmen
  • Sánchez-Ramos, José
  • Álvarez, Servando
  • Tenorio Ríos, José Antonio
  • Cabeza, Luisa F.
Emerging technologies and new intelligent management systems will be needed to rise to the energy challenges posed by buildings today. Thermally activated building systems (TABS) are attracting growing interest on the back of their energy savings potential. The TABS studied in this article, a new prefabricated panel designed for installation in residential building façades, was characterised by the high thermal inertia afforded by the phase change materials in its composition. The design and assessment of the potential savings derived from TABS require specific characterisation methodologies to estimate the amount of useful energy available to control the indoor environment. A two-stage approach was adopted for the TABS studied here with ``ideal'' operating control (the building is assumed to be at a constant desired temperature). The first stage involved a simplified method for characterising system behaviour based on performance maps developed from CFD simulations. Such maps can be used to quickly assess changes in system energy performance following on variations in design and operating parameters. In the second, the TABS was integrated into a building with a simplified model to assess monthly energy demand to evaluate the system potential for energy savings in representative types of Spanish single-family housing in different climate zones. The first-stage findings showed that given the system significant inertia, it discharged for several days, even when charging occurred only on the first, ensuring a wide operating range adaptable to renewable resource limitations. The analysis of potential, in turn, revealed that savings of over 40% in heating demand are possible even under the least favourable circumstances., This study was funded by Spanish Ministry of Economy and Competitiveness under the INPHASE (RTC-2015-3583-5) and DACAR (BIA2016-77431-C2-2-R), the European Regional Development Fund (ERDF) and the University of Seville under its Research Plan VI (VPPI-US). Prof. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental analysis of atmospheric heat sinks as heat dissipators

  • Guerrero Delgado, M. Carmen
  • Sánchez-Ramos, José
  • Pavón Moreno, M. Carmen
  • Tenorio Ríos, José Antonio
  • Álvarez, Servando
Overheating, a general problem both in urban spaces and inside buildings, calls for the deployment of passive cooling techniques to reduce energy consumption, protect the environment and institute satisfactory comfort levels. A key factor in such techniques is the capitalisation on the cooling potential of natural heat sinks. The sky, one such sink, has essentially limitless cooling power. In addition, its temperature on fair nights is lower than that of other environmental sinks (ground and air). The sky’s promise in that respect prompted this exploration of the potential of nocturnal radiation cooling. A review of the state of the art revealed that in all the radiative dissipators developed and tested to date the dissipation fluid (water) transferred heat indirectly to the heat sink (the sky) by circulating water inside solar collector pipes. The highest values reported for maximum dissipation power were on the order of 100 W/m2. The present study aimed to asses night time dissipation power in a dual system in which water circulated either inside pipes or flowed down the outer surface of the collector. The two modes, one involving in-pipe circulation and the other outer surface downflow, were compared experimentally, for whereas the former has been analysed and assessed by earlier researchers, the latter has not. The empirical findings verified that downflow setups enhanced cooling, delivering up to five-fold the dissipation power obtained with the conventional arrangement., This study was funded by the Spanish Ministry of the Economy and Competitiveness under DACAR project ‘Zero-Energy Balance Districts through Algorithms of Adaptive Comfort and Optimal Management of Energy Networks’ (BIA2016-77431-C2-2-R); the ERDF under Urban Innovative Actions programme CartujaQanat project (UIA03-301) ‘Recovering Street life in a Climate-Changing World’; and the University of Seville under Research Plan VI (VPPI-US)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Building thermal storage technology: Compensating renewable energy fluctuations

  • Guerrero Delgado, M. Carmen
  • Sánchez Ramos, José
  • Álvarez Domínguez, Servando
  • Tenorio, José Antonio
  • Cabeza, Luisa F.
Emerging technologies and new intelligent management systems will be needed to rise to the energy challenges posed by buildings today. Thermally activated building systems (TABS) are attracting growing interest on the back of their energy savings potential. The TABS studied in this article, a new prefabricated panel designed for installation in residential building façades, was characterised by the high thermal inertia afforded by the phase change materials in its composition. The design and assessment of the potential savings derived from TABS require specific characterisation methodologies to estimate the amount of useful energy available to control the indoor environment. A two-stage approach was adopted for the TABS studied here with ``ideal'' operating control (the building is assumed to be at a constant desired temperature). The first stage involved a simplified method for characterising system behaviour based on performance maps developed from CFD simulations. Such maps can be used to quickly assess changes in system energy performance following on variations in design and operating parameters. In the second, the TABS was integrated into a building with a simplified model to assess monthly energy demand to evaluate the system potential for energy savings in representative types of Spanish single-family housing in different climate zones. The first-stage findings showed that given the system significant inertia, it discharged for several days, even when charging occurred only on the first, ensuring a wide operating range adaptable to renewable resource limitations. The analysis of potential, in turn, revealed that savings of over 40% in heating demand are possible even under the least favourable circumstances., This study was funded by Spanish Ministry of Economy and Competitiveness under the INPHASE (RTC-2015-3583-5) and DACAR (BIA2016-77431-C2-2-R), the European Regional Development Fund (ERDF) and the University of Seville under its Research Plan VI (VPPI-US). Prof. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Gas engine heat pump system: Experimental facility and thermal evaluation for 5 different units

  • Sánchez Ramos, José
  • Guerrero Delgado, M. Carmen
  • Álvarez Domínguez, Servando
  • Molina Féliz, José Luis
  • Cabeza, Luisa F.
Gas Engine Heat Pump requires simplified characterization models that allow evaluating its economic and energy impacts. These simplified solutions can be implemented in complex simulation algorithms for different commercial solutions with a low computational cost. The study aims to develop a simplified characterization model highly accurate, easy to reproduce and apply. The methodology carried out uses an experimental installation to analyze different units tested under different operating conditions. With the results of the carried out experimentation, it will be possible to know the real thermal response of these HVAC systems and to develop the simplified characterization model based on operating curves. The thermal behaviour of the systems could be evaluated using the defined curves under any operating condition of the GEHP system. Moreover, they are based on parameters available in the manufacturer datasheets. The results of the validation show that this model is highly accurate. It has a maximum error of 25% and an average error of less than 7%. Also, the formulation shows that it is easy to reproduce and to apply. Last, uncertainty analysis shows reasonable confidence in the identified performance curves., The authors would like to take this opportunity to thank SEDIGAS (the Spanish Gas Association) and manufactured companies (PANASONIC and AISIN) for our fruitful long-term cooperation to promote the deregulation of the market and its role as a critical element in the economic development and quality of life of future generations. Finally, the DACAR project “Zero-Energy Balance Districts Through Algorithms of Adaptive Comfort and Optimal Management of Energy Networks” (BIA2016-77431-C2-2-R) funded by Ministry of Economy and Competitiveness (Government of Spain) and European Regional Development's funds of European Comission (ERDF) for its partial support.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Potential of energy flexible buildings: Evaluation of DSM strategies using building thermal mass

  • Sánchez Ramos, José
  • Pavón Moreno, M. Carmen
  • Guerrero Delgado, M. Carmen
  • Álvarez Domínguez, Servando
  • Cabeza, Luisa F.
Energy flexible buildings through smart demand-side management (DSM) or smart demand response (DR) using efficient energy storage, are currently one of the most promising options to deploy low-carbon technologies in the electricity networks without the need of reinforcing existing networks. Although, many ignore the potential, economic and energetic benefits these alternatives could hold for buildings, users and tariffs. In the study carried out a control system of demand management measures is analyzed, based on the use of the buildings' thermal mass as thermal storage (preheating, precooling and night ventilation). This demand management system is analyzed in five existing residential buildings in the so-called reference scenario (construction, user and current prices). Subsequently, comes the analysis of the optimal manage- ment strategy choice from the system, when facing changes in the housings' constructive characteristics and electric tariffs. The dynamism of the management system stands out from the results achieved, as well as the de- pendence of the possible strategy choices on the climate zones. In the reference situation, the maximum economic savings obtained after the implementation of the management system correspond to 3.2% for heating and 8.5% for cooling. In this same manner, when the buildings are previously rehabilitated, the savings can double even generating energy savings. Finally, it can be concluded that the low installation costs of these measures make them a winning solution, as long as the electric pricing and user behavior allow the required flexibility., The authors would like to take this opportunity to thank the DACAR project “Zero-Energy Balance Districts Through Algorithms of Adaptive Comfort and Optimal Management of Energy Networks” (BIA2016-77431-C2-2-R) funded by Ministry of Economy and Competitiveness (Government of Spain) and European Regional Development's Funds (ERDF) for its partial support. And the University of Seville under its Research Plan VI (VPPI-US).