Pasar al contenido principal

EXTENSION DE LA VIDA UTIL MEDIANTE REFUERZO CON FRP DE ESTRUCTURAS DE HORMIGON ARMADO: EFECTOS DE LAS CONDICIONES AMBIENTALES Y CARGA DE FATIGA Y A LARGO PLAZO

BIA2017-84975-C2-2-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE GIRONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of the bond-slip law on the bond response of NSM FRP reinforced concrete elements

  • Gómez, Javier
  • Torres, Lluís
  • Barris, Cristina
The Near-Surface Mounted (NSM) technique with Fibre Reinforced Polymer (FRP) reinforcement as strengthening system of concrete structures has been broadly studied during the last years. In this methodology, it is widely accepted that the bond behaviour between FRP and concrete, usually defined by a local bond-slip law, is a crucial factor for the efficiency of the FRP strengthening system. This paper studies the effect of the bond-slip law shape on the load capacity, the effective bond length, the slip of the joint, and the shear stress distribution along the bonded length, which are essential parameters on the strengthening design. A numerical procedure based on finite differences method to solve the governing equations of the FRP-to-concrete joint is developed and validated. Then, a parametric study is performed. The effect of the shear bond strength, slip at the bond strength, maximum slip and friction branch, on the parameters previously described is discussed.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Simplified tests to study the size effect of the compression chord in beams under shear forces: application of DIC methodology, Ensayos en probetas para el estudio del efecto tamaño en la cabeza de compresión de vigas sometidas a esfuerzo cortante: aplicación de la metodología DIC

  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Barris Peña, Cristina
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Torres Llinàs, Lluís
  • Santander, Andres
To evaluate how the size effect affects the stresses developed along the compression chord in a beams subjected to shear forces, a simplified experimental program was developed on 50 prismatic specimens subjected to a splitting test. The studied parameters were: dimensions, slenderness, concrete compressive strength, and maximum aggregate size. To capture the post-peak behavior of the concrete, the load was introduced as a function of the crack width, through appropriate control algorithms. Digital Image Correlation (DIC) in a 2D configuration has also been used to accurately capture the formation, width and propagation of cracks to corroborate the experimental measurements., The financial support provided by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Funds for Regional Development (FEDER), through the Research projects: BIA2015-64672-C4-1-R and BIA2017-84975-C2-2-P and through the Excellence network BIA2015-71484-REDT.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Performance-based slenderness limits for deflections and reinforcement stresses control in RC beams, Límites de esbeltez basados en prestaciones para vigas de hormigón armado para el control de deformaciones y el control de tensiones en la armadura

  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Torres Llinàs, Lluís
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Barris Peña, Cristina
Due to the complex deformational behavior of cracked RC members, an effective way to ensure the fulfilment of the SLS is to limit the slenderness ratio l/d of the element. In this study, the deformation slenderness limit concept is generalized to incorporate crack width limitations. The proposed slenderness limits are compared with those derived from non-linear time-dependent analysis and also with those obtained using the EC2 method of deflections interpolation. Very good approximation and low scatter has been obtained showing that the proposed slenderness limits are a useful tool for performance-based design of RC structures., The financial support provided by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Funds for Regional Development (FEDER), through the Research projects: BIA2015-64672-C4-1-R and BIA2017-84975-C2-2-P and through the Excellence network BIA2015-71484-REDT
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Performance-based slenderness limits for deformations and reinforcement stresses control in reinforced concrete beams, Límites de esbeltez basados en prestaciones para vigas de hormigón armado para el control de deformaciones y el control de tensiones en la armadura

  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Torres Llinàs, Lluís
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Barris Peña, Cristina
Los procedimientos actuales de dimensionamiento a flexión de elementos de hormigón armado, basados en la comprobación de estado límite último (ELU), proporcionan suficiente resistencia para soportar las cargas de diseño con un canto reducido. Sin embargo, las dimensiones estrictas de la sección transversal y la cantidad de armadura calculada para satisfacer el ELU pueden ser insuficientes para evitar deformaciones excesivas que pueden producir daños en los elementos no estructurales, o para garantizar el control de la fisuración y satisfacer así, los requisitos de durabilidad, funcionalidad o estética.Debido a la complejidad asociada a un cálculo riguroso de las deformaciones y el ancho de fisura en elementos de hormigón armado a lo largo de su vida útil, una forma efectiva de garantizar la satisfacción del estado límite de servicio es mediante la limitación de la relación de esbeltez l/d del elemento. En el presente estudio, el concepto de esbeltez límite, utilizado anteriormente para el control de la deformación, se generaliza para incorporar las limitaciones de la abertura de fisura, en el marco del diseño estructural basado en prestaciones. Por ello, se derivan las ecuaciones para la esbeltez límite que incorporan los parámetros principales que influyen en el comportamiento de servicio de los elementos de hormigón armado, que son válidos para secciones transversales rectangulares en forma de I o T y para elementos simplemente apoyados o continuos. La fisuración y los efectos a largo plazo se explican a través de coeficientes simplificados derivados de la mecánica estructural y las observaciones experimentales.Las esbelteces límite propuestas, tanto para una carga aplicada constante como para una deformación en la armadura constante, se comparan con las obtenidos utilizando el procedimiento EC2 para el cálculo de deformaciones, basado en la integración de curvaturas. Se han obtenido buenos resultados en términos de errores y dispersión, lo que demuestra que las esbelteces límite propuestas son una herramienta útil para el diseño basado en prestaciones de estructuras de hormigón armado. El carácter mecánico de la formulación facilita su modificación para situaciones diferentes a las utilizadas en su deducción, por ejemplo, diferentes tipos de carga, vigas parcialmente pretensadas o elementos de hormigón armado con FRP, entre otros., The financial support provided by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Funds for Regional Development (FEDER), through the Research projects: BIA2015-64672-C4-1-R and BIA2017-84975-C2-2-P and through the Excellence network BIA2015-71484-REDT., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental study of the effect of high service temperature on the flexural performance of near-surface mounted (NSM) carbon fiber-reinforced polymer (CFRP)-strengthened concrete beams

  • Jahani, Younes
  • Baena Muñoz, Marta
  • Gómez Colom, Javier
  • Barris Peña, Cristina
  • Torres Llinàs, Lluís
This paper presents a study of the effect of high service temperature (near or beyond glass transition temperature (Tg) of structural epoxy adhesive) on the behavior of near-surface mounted (NSM) carbon fiber-reinforced polymer (CFRP)-strengthened reinforced concrete (RC) beams. The study includes experimental work as well as analytical and numerical analysis. To this end, fourteen beams have been tested up to failure in two different series. In series 1, specimens with three different CFRP areas have been tested at two different temperatures (i.e., 20 and 40 °C). In series 2, and with the aim of evaluating the effect of higher temperatures, only one CFRP area was tested under four different temperatures (i.e., 20, 60, 70, and 85 °C). Experimental results are evaluated in terms of load-deflections, failure modes, and bond performance. Furthermore, the experimental load-deflection curves are satisfactorily compared to both analytical predictions and finite element (FE) numerical simulations. In both cases, shrinkage and temperature effects on the short-term response of flexural elements have been accounted for. No significant reduction in stiffness and ultimate load was observed for specimens being tested up to 60 °C (in the range of epoxy Tg), showing FRP rupture failure in all of them. For specimens under 70 and 85 °C, the failure mode changed from FRP rupture to FRP end debonding and concrete crushing, respectively, This research was funded by the Spanish Government (MINECO) [Project Ref. BIA2017-84975-C2-2-P]; the Generalitat de Catalunya [grant number 2019FI_B 00054] and the University of Girona [grant number IFUdG2018/28]
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental study and numerical prediction of the bond response of NSM CFRP laminates in RC elements under sustained loading

  • Gómez Colom, Javier
  • Barris Peña, Cristina
  • Jahani, Younes
  • Baena Muñoz, Marta
  • Torres Llinàs, Lluís
This paper presents a study into bond behaviour under sustained loading of Near-Surface Mounted (NSM) Carbon-Fibre Reinforced Polymers (CFRP) concrete joints, through an experimental programme and a numerical analysis. The experimental programme consisted of eight NSM CFRP-concrete pull-out specimens tested under sustained loading and laboratory conditions (20 °C and 55%HR) inside a climatic chamber. Previously, the instantaneous bond behaviour of the NSM CFRP-concrete joint was studied using 18 specimens tested until failure. Furthermore, the tensile behaviour of the adhesive under instantaneous and sustained loading was studied at different loading levels under the same environmental conditions. Finally, a numerical procedure was proposed to predict the bonded joint response under sustained loading. A creep coefficient and a strength reduction factor were applied to the instantaneous bond-slip law to simulate the degrading effect the sustained loading had on the behaviour of the bonded joint. Good agreement between the experimental and numerical results was obtained for the tested parameters, however, further research needs to be carried out in order to extrapolate this methodology to other cases, This work was supported by the Spanish Government (MINECO) [Project Ref. BIA2017-84975-C2-2-P]; the University of Girona [grant number IFUdG2018/28]; and the Generalitat de Catalunya [grant number 2019FI_B 00054], Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An EMI-Based Clustering for Structural Health Monitoring of NSM FRP Strengthening Systems

  • Perera, Ricardo
  • Torres Llinàs, Lluís
  • Ruiz, Antonio
  • Barris Peña, Cristina
  • Baena Muñoz, Marta
The use of fiber-reinforced polymers (FRP) in civil construction applications with the near-surface mounted (NSM) method has gained considerable popularity worldwide and can produce confident strengthening and repairing systems for existing concrete structures. By using this technique, the FRP reinforcement is installed into slits cut into the concrete cover using cement mortar or epoxy as bonding materials, yielding an attractive method to strengthen concrete structures as an advantageous alternative to the external bonding of FRP sheets. However, in addition to the two conventional failure modes of concrete beams, sudden and brittle debonding failures are still likely to happen. Due to this, a damage identification technology able to identify anomalies at early stages is needed. In this work, some relevant cluster-based methods and their adaptation to electromechanical impedance (EMI)-based damage detection in NSM-FRP strengthened structures are developed and validated with experimental tests. The performance of the proposed clustering approaches and their evaluation in comparison with the experimental observations have shown a strong potential of these techniques as damage identification methodology in an especially complex problem such as NSM-FRP strengthened concrete structures, The writers acknowledge the support for the work reported in this paper from the Spanish Ministry of Science, Innovation, and Universities (projects BIA2017-84975-C2-1-P and BIA2017-84975-C2-2-P)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Performance of Linear Mixed Models to Assess the Effect of Sustained Loading and Variable Temperature on Concrete Beams Strengthened with NSM-FRP

  • Perera, Ricardo
  • Torres Llinàs, Lluís
  • Díaz, Francisco J.
  • Barris Peña, Cristina
  • Baena Muñoz, Marta
Although some extended studies about the short-term behavior of NSM FRP strengthened beams have been carried out, there is a lack of knowledge about the behavior of this kind of strengthening under sustained loads and high service temperatures. Electromechanical impedance method formulated from measurements obtained from PZT patches gives the ability for monitoring the performance and changes experienced by these strengthened beams at a local level, which is a key aspect considering its possible premature debonding failure modes. This paper presents an experimental testing program aimed at investigating the long-term performance of a concrete beam strengthened with a NSM CFRP laminate. Long term performance under different levels of sustained loading and temperature conditions is correlated with EMI signatures processed using Linear Mixed-effects models. These models are very powerful to process datasets that have a multilevel or hierarchical structure as those yielded by our tests. Results have demonstrated the potential of these techniques as health monitoring methodology under different conditions in an especially complex problem such as NSM-FRP strengthened concrete structures, The writers acknowledge the support for the work reported in this paper from the Spanish Ministry of Science, Innovation and Universities (projects BIA2017-84975-C2-1-P and BIA2017-84975-C2-2-P)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Diagnosis of NSM FRP reinforcement in concrete by using mixed-effects models and EMI approaches

  • Perera, Ricardo
  • Gil, Alberto
  • Torres Llinàs, Lluís
  • Barris Peña, Cristina
The use of fibre reinforced polymer (FRP) in civil construction applications with near-surface mounted (NSM) method has gained considerable popularity worldwide as suitable method for strengthening existing concrete structures. However, there is very little experience in the implementation of methods able to give a reliable prediction about the health of this type of structures even although sudden and brittle failure modes are likely to happen. Because of it, more contributions on this topic are really needed in order to prevent possible catastrophic failures. In this paper, a novel approach based on linear mixed effects models implemented on results from experimental tests performed on concrete beams strengthened with NSM FRP has been explored. In spite of their rapid growth in other areas, mixed effects models have barely been applied in structural problems. Impedance measurements captured from PZT sensors embedded and externally bonded to the beam are used for the quantitative and qualitative analysis. This research shows that the evolution of the progressive damage for this kind of repairing method can be effectively monitored using the proposed approach, The writers acknowledge the support for the work reported in this paper from the Spanish Ministry of Science, Innovation, and Universities (projects BIA2017-84975-C2-1-P and BIA2017-84975-C2-2-P)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Simplified tests to study the size effect of the compression chord in beams under shear forces: application of DIC methodology, Ensayos en probetas para el estudio del efecto tamaño en la cabeza de compresión de vigas sometidas a esfuerzo cortante: aplicación de la metodología DIC

  • Oller Ibars, Eva
  • Barris Peña, Cristina
  • Marí Bernat, Antonio Ricardo
  • Torres Llinàs, Lluís
  • Santander, Andres
To evaluate how the size effect affects the stresses developed along the compression chord in a beams subjected to shear forces, a simplified experimental program was developed on 50 prismatic specimens subjected to a splitting test. The studied parameters were: dimensions, slenderness, concrete compressive strength, and maximum aggregate size. To capture the post-peak behavior of the concrete, the load was introduced as a function of the crack width, through appropriate control algorithms. Digital Image Correlation (DIC) in a 2D configuration has also been used to accurately capture the formation, width and propagation of cracks to corroborate the experimental measurements., The financial support provided by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Funds for Regional Development (FEDER), through the Research projects: BIA2015-64672-C4-1-R and BIA2017-84975-C2-2-P and through the Excellence network BIA2015-71484-REDT., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Performance-based slenderness limits for deflections and reinforcement stresses control in RC beams, Límites de esbeltez basados en prestaciones para vigas de hormigón armado para el control de deformaciones y el control de tensiones en la armadura

  • Marí Bernat, Antonio Ricardo
  • Torres Llinàs, Lluís
  • Oller Ibars, Eva
  • Barris Peña, Cristina
Due to the complex deformational behavior of cracked RC members, an effective way to ensure the fulfilment of the SLS is to limit the slenderness ratio l/d of the element. In this study, the deformation slenderness limit concept is generalized to incorporate crack width limitations. The proposed slenderness limits are compared with those derived from non-linear time-dependent analysis and also with those obtained using the EC2 method of deflections interpolation. Very good approximation and low scatter has been obtained showing that the proposed slenderness limits are a useful tool for performance-based design of RC structures., The financial support provided by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Funds for Regional Development (FEDER), through the Research projects: BIA2015-64672-C4-1-R and BIA2017-84975-C2-2-P and through the Excellence network BIA2015-71484-REDT, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Performance-based slenderness limits for deformations and reinforcement stresses control in reinforced concrete beams, Límites de esbeltez basados en prestaciones para vigas de hormigón armado para el control de deformaciones y el control de tensiones en la armadura

  • Marí Bernat, Antonio Ricardo
  • Torres Llinàs, Lluís
  • Oller Ibars, Eva
  • Barris Peña, Cristina
Los procedimientos actuales de dimensionamiento a flexión de elementos de hormigón armado, basados en la comprobación de estado límite último (ELU), proporcionan suficiente resistencia para soportar las cargas de diseño con un canto reducido. Sin embargo, las dimensiones estrictas de la sección transversal y la cantidad de armadura calculada para satisfacer el ELU pueden ser insuficientes para evitar deformaciones excesivas que pueden producir daños en los elementos no estructurales, o para garantizar el control de la fisuración y satisfacer así, los requisitos de durabilidad, funcionalidad o estética.Debido a la complejidad asociada a un cálculo riguroso de las deformaciones y el ancho de fisura en elementos de hormigón armado a lo largo de su vida útil, una forma efectiva de garantizar la satisfacción del estado límite de servicio es mediante la limitación de la relación de esbeltez l/d del elemento. En el presente estudio, el concepto de esbeltez límite, utilizado anteriormente para el control de la deformación, se generaliza para incorporar las limitaciones de la abertura de fisura, en el marco del diseño estructural basado en prestaciones. Por ello, se derivan las ecuaciones para la esbeltez límite que incorporan los parámetros principales que influyen en el comportamiento de servicio de los elementos de hormigón armado, que son válidos para secciones transversales rectangulares en forma de I o T y para elementos simplemente apoyados o continuos. La fisuración y los efectos a largo plazo se explican a través de coeficientes simplificados derivados de la mecánica estructural y las observaciones experimentales.Las esbelteces límite propuestas, tanto para una carga aplicada constante como para una deformación en la armadura constante, se comparan con las obtenidos utilizando el procedimiento EC2 para el cálculo de deformaciones, basado en la integración de curvaturas. Se han obtenido buenos resultados en términos de errores y dispersión, lo que demuestra que las esbelteces límite propuestas son una herramienta útil para el diseño basado en prestaciones de estructuras de hormigón armado. El carácter mecánico de la formulación facilita su modificación para situaciones diferentes a las utilizadas en su deducción, por ejemplo, diferentes tipos de carga, vigas parcialmente pretensadas o elementos de hormigón armado con FRP, entre otros., The financial support provided by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Funds for Regional Development (FEDER), through the Research projects: BIA2015-64672-C4-1-R and BIA2017-84975-C2-2-P and through the Excellence network BIA2015-71484-REDT., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of curing, post-curing and testing temperatures on mechanical properties of a structural adhesive

  • Jahani, Younes
  • Baena Muñoz, Marta
  • Barris Peña, Cristina
  • Perera, Ricardo
  • Torres Llinàs, Lluís
Structural cold-curing adhesives are widely used to strengthen Reinforced Concrete (RC) structures with Fibre Reinforced Polymers (FRPs). The performance of these adhesives, and therefore the performance of the strengthening system, may be affected by temperature, as ambient-cured structural adhesives usually have low glass transition temperature (Tg). This paper presents a comprehensive experimental investigation on the influence of temperature on mechanical properties and Tg of a structural epoxy adhesive. The experimental program was divided in four groups of specimens. In Group 1, the effect of curing and post-curing temperature on Tg of the epoxy adhesive was investigated. In Groups 2-4, the effects of testing temperature, curing temperature and post-curing temperature, respectively, on adhesive mechanical properties were studied. Experimental results confirm that curing and post-curing temperature affected Tg differently depending whether the applied temperature was below or beyond the epoxy Tg. Similar behavior was observed in the mechanical properties of the epoxy, as they showed improvements when curing process (curing and post-curing) temperature was below Tg and they were negatively affected when curing process temperature was beyond Tg. Besides, tensile and compressive mechanical properties were negatively affected by testing temperatures beyond 20 ◦C, This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO/AEI/FEDER, UE) under projects BIA2017- 84975-C2-2-P and BIA2017-84975-C2-1-P and the Generalitat de Catalunya (grant number 2019FI_B 00054], Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Characterization and Simulation of the Bond Response of NSM FRP Reinforcement in Concrete

  • Gómez Colom, Javier
  • Torres Llinàs, Lluís
  • Barris Peña, Cristina
The near-surface mounted (NSM) technique with fiber reinforced polymer (FRP) reinforcement as strengthening system for concrete structures has been broadly studied during the last years. The efficiency of the NSM FRP-to-concrete joint highly depends on the bond between both materials, which is characterized by a local bond-slip law. This paper studies the effect of the shape of the local bond-slip law and its parameters on the global response of the NSM FRP joint in terms of load capacity, effective bond length, slip, shear stress, and strain distribution along the bonded length, which are essential parameters on the strengthening design. A numerical procedure based on the finite difference method to solve the governing equations of the FRP-to-concrete joint is developed. Pull-out single shear specimens are tested in order to experimentally validate the numerical results. Finally, a parametric study is performed. The effect of the bond-shear strength slip at the bond strength, maximum slip, and friction branch on the parameters previously described is presented and discussed, This research was funded by the Spanish Government (MINECO), Project Ref. BIA2017-84975-C2-2-P
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analysis of the Impact of Sustained Load and Temperature on the Performance of the Electromechanical Impedance Technique through Multilevel Machine Learning and FBG Sensors

  • Perera, Ricardo
  • Torres Llinàs, Lluís
  • Díaz, Francisco J.
  • Barris Peña, Cristina
  • Baena Muñoz, Marta
The electro-mechanical impedance (EMI) technique has been applied successfully to detect minor damage in engineering structures including reinforced concrete (RC). However, in the presence of temperature variations, it can cause false alarms in structural health monitoring (SHM) applications. This paper has developed an innovative approach that integrates the EMI methodology with multilevel hierarchical machine learning techniques and the use of fiber Bragg grating (FBG) temperature and strain sensors to evaluate the mechanical performance of RC beams strengthened with near surface mounted (NSM)-fiber reinforced polymer (FRP) under sustained load and varied temperatures. This problem is a real challenge since the bond behavior at the concrete–FRP interface plays a key role in the performance of this type of structure, and additionally, its failure occurs in a brittle and sudden way. The method was validated in a specimen tested over a period of 1.5 years under different conditions of sustained load and temperature. The analysis of the experimental results in an especially complex problem with the proposed approach demonstrated its effectiveness as an SHM method in a combined EMI–FBG framework, The writers acknowledge the support for the work reported in this paper from the Spanish Ministry of Science, Innovation and Universities (projects BIA2017-84975-C2-1-P and BIA2017-84975-C2-2-P)