Pasar al contenido principal

OPTIMIZACION DE LOS PROCESOS DE ABLACION LASER PARA LA LIMPIEZA Y TEXTURIZADO DE SUPERFICIES EN 3D DE ROCAS ORNAMENTALES

BIA2017-85897-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DA CORUÑA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Dual combination of cleaning methods (scalpel, biocide, laser) to enhance lichen removal from granite

  • Pozo Antonio, José Santiago
  • Rivas Brea, Maria Teresa
  • Lopez De Silanes Vazquez, Maria Eugenia
  • Ramil, Alberto
  • López Díaz, Ana Jesús
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Three cleaning methods, namely i) a commercial biocide applied by brush with the subsequent extraction of organic remains by a rod, ii) a scalpel or iii) a Nd:YVO4 laser at 355 nm, single application as well as paired combinations, were tested for removing from a granite two different crustose lichens: Diploschistes scruposus (lighter with a clearly distinguished thallus) and Polysporina simplex (darker with a poorly developed thallus). In addition to the removal rate, side effects such as melting of biotite and feldspar grains and chromatic changes were assessed. The multianalytical approach was based on stereomicroscopy, light microscopy, Fourier Transform Infrared spectroscopy, Scanning Electron Microscopy and color spectrophotometry. Combining cleaning methods enhanced the removal efficacy. Biocide followed by laser was the most effective method for removing both lichens colonizing this granite. Mineral melting was more intense for the samples covered by Polysporina simplex due to its lower coverage degree and darker color., Agencia Estatal de Investigación | Ref. BIA2017-85897-R, Agencia Estatal de Investigación | Ref. RYC2020-028902-I
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Dual Combination of Cleaning Methods (Scalpel, Biocide, Laser) To Enhance Lichen Removal From Granite

  • Pozo Antonio, José Santiago
  • Rivas Brea, Teresa
  • López de Silanes, María Eugenia
  • Ramil, Alberto
  • López, Ana
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, [Abstract] Three cleaning methods, namely i) a commercial biocide applied by brush with the subsequent extraction of organic remains by a rod, ii) a scalpel or iii) a Nd:YVO4 laser at 355 nm, single application as well as paired combinations, were tested for removing from a granite two different crustose lichens: Diploschistes scruposus (lighter with a clearly distinguished thallus) and Polysporina simplex (darker with a poorly developed thallus). In addition to the removal rate, side effects such as melting of biotite and feldspar grains and chromatic changes were assessed. The multianalytical approach was based on stereomicroscopy, light microscopy, Fourier Transform Infrared spectroscopy, Scanning Electron Microscopy and color spectrophotometry. Combining cleaning methods enhanced the removal efficacy. Biocide followed by laser was the most effective method for removing both lichens colonizing this granite. Mineral melting was more intense for the samples covered by Polysporina simplex due to its lower coverage degree and darker color., This research was funded by the Spanish Ministerio de Economía y Competitividad under grant number BIA2017-85897-R. J.S. Pozo-Antonio was supported by the Ministry of Science and Innovation, Government of Spain through grant number RYC2020-028902-I. The authors thank Ms Cristina Montojo from Escola Superior de Conservación e Restauración de Bens Culturais de Galicia and PhD Maria del Carmen López from Universidade de Santiago de Compostela for technical assistance. Funding for open access charge: Universidade de Vigo/CISUG
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Development of processing strategies for 3D controlled laser ablation: Application to the cleaning of stonework surfaces

  • López, Ana
  • Lamas, Javier
  • Pozo Antonio, José Santiago
  • Rivas Brea, Teresa
  • Ramil, Alberto
[Abstract] Laser cleaning is an environmentally friendly method based on laser ablation processes to remove impurities or contaminants from a surface layer of a material. The configuration of a laser station in the case of flat surfaces is not complicated because laser irradiates from a fixed position. In contrast, controlled laser processing of 3D surfaces is not yet completely solved because the laser beam must be scanned along a three dimensional (3D) path. In this paper, a 3D laser processing strategy was developed to achieve an accurate and successful cleaning of freeform surfaces. Laser processing trajectories can be programmed directly on the 3D surface model instead of the 2D projection, which ensures both constant fluence and constant scanning speed all over the 3D surface during the laser processing. The strategy was applied to the removal of spray paint from a granite carved skirting board in order to validate the 3D cleaning system. The results, evaluated by means of hyperspectral imaging, stereomicroscopy and scanning electron microscopy, were compared with those of the surfaces treated with the same parameters but deactivating the 3D processing system. These analyses confirmed the improvement of the cleaning process when the 3D processing system is applied., This work was supported by the Spanish Government Research Projects BIA2017-85897-R and BIA2014-54186-R. J. Santiago Pozo-Antonio was supported by a postdoctoral contract awarded by the University of Vigo within the framework of the 2011–2015 Galician Plan for Research, Innovation and Growth (Plan I2C) for 2014.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Femtosecond Laser Texturing as a Tool to Increase the Hydrophobicity of Ornamental Stone: The Influence of Lithology and Texture

  • López, Ana
  • Pozo Antonio, José Santiago
  • Moreno, Alicia
  • Rivas Brea, Teresa
  • Pereira, Lola
  • Ramil, Alberto
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In the field of stone conservation, a very common direct intervention seeks to increase the water repellence of objects. By limiting the interaction between the solid and the water, the possibility of alteration due to the action of the water (liquid or solid) as well as that related to the colonisation of surfaces by organisms is reduced. To decrease wettability, chemicals are often applied to create a surface layer; however, laser texturing, currently used in different industrial and technological fields, could be considered as an alternative procedure, thus eliminating exposure to chemicals with varying degrees of toxicity. In this paper, modification of the wetting properties of stone surfaces upon texturing induced by a femtosecond laser structuring process was investigated. Four ornamental stones with different mineralogic and chemical compositions (slate, quartzite, granite and marble) and other surface characteristics were laser processed by applying different texturing patterns (parallel grooves and matrices of craters) and different irradiation parameters. After texturing, variations on the wettability characteristics of the different rock surfaces were evaluated by means of static contact angle measurements and modifications on the topography were studied via confocal microscopy. Furthermore, potential harmful effects on the ornamental stones were evaluated through colour spectrophotometry, petrographic microscopy and SEM-EDX. The results indicate two different behaviours in the ornamental stones analysed that were statistically confirmed: on the one hand, the group formed by slate, quartzite and granite, in which the laser texturing caused a decrease in the contact angle and, on the other hand, marble in which laser texturing was able to increase the contact angle above 90°, giving the stone surface a hydrophobic character. The topographic analyses together with microscopy observations indicate that the grain size, mineral composition, type of fissures and initial surface quality of the stones were key in the different wetting behaviour of the laser textured stones., This research was funded by the Spanish Ministerio de Economía y Competitividad under grant number BIA2017-85897-R. J.S. Pozo-Antonio was financed by the University of Vigo through a contract as Distinguished Researcher. MD Pereira had access to the ICP-MS and XRD thanks to the University of Salamanca research centre