Pasar al contenido principal

ESTUDIO MEDIANTE DISPOSITIVOS MICROFLUIDICOS BIOMIMETICOS DEL MICROENTORNO DEL GLIOBLASTOMA Y SU IMPLICACION EN LOS MECANISMOS DE RESISTENCIA A QUIMIOTERAPIA.

BIO2016-79092-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Activated human primary NK cells efficiently kill colorectal cancer cells in 3D spheroid cultures irrespectively of the level of PD-L1 expression

  • Lanuza, Pilar M.
  • Vigueras, Alan
  • Olivan, Sara
  • Prats, Anne C.
  • Costas, Santiago
  • Llamazares, Guillermo
  • Sánchez-Martínez, Diego
  • Ayuso, José María
  • Fernández, Luis
  • Ochoa, Ignacio
  • Pardo, Julián
Haploidentical Natural Killer (NK) cells have been shown as an effective and safe alternative for the treatment of haematological malignancies with poor prognosis for which traditional therapies are ineffective. In contrast to haematological cancer cells, that mainly grow as single suspension cells, solid carcinomas are characterised by a tridimensional (3D) architecture that provide specific surviving advantages and resistance against chemo- and radiotherapy. However, little is known about the impact of 3D growth on solid cancer immunotherapy especially adoptive NK cell transfer. We have recently developed a protocol to activate ex vivo human primary NK cells using B lymphoblastic cell lines, which generates NK cells able to overcome chemoresistance in haematological cancer cells. Here we have analysed the activity of these allogeneic NK cells against colorectal (CRC) human cell lines growing in 3D spheroid culture and correlated with the expression of some of the main ligands regulating NK cell activity. Our results indicate that activated NK cells efficiently kill colorectal tumour cell spheroids in both 2D and 3D cultures. Notably, although 3D CRC cell cultures favoured the expression of the inhibitory immune checkpoint PD-L1, it did not correlate with increased resistance to NK cells. Finally, we have analysed in detail the infiltration of NK cells in 3D spheroids by microscopy and found that at low NK cell density, cell death is not observed although NK cells are able to infiltrate into the spheroid. In contrast, higher densities promote tumoural cell death before infiltration can be detected. These findings show that highly dense activated human primary NK cells efficiently kill colorectal carcinoma cells growing in 3D cultures independently of PD-L1 expression and suggest that the use of allogeneic activated NK cells could be beneficial for the treatment of colorectal carcinoma., This work was supported by grant SAF2014-54763-C2-1-R, BIO2016-79092-R and DPI2011- 28262-c04-0 from Ministerio de Economia y Competitividad, Spain, Fondo Social Europeo (Gobierno de Aragon), and a pre-doctoral contract (FPU) from Ministerio de Educacion, Cultura y Deporte (PML). JP was supported by Aragon ICD Foundation., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Combined in-silico and on-chip validation of pseudopalisade formation hypothesis in Glioblastoma

  • Martínez-González, Alicia
  • Ayuso, Jose Maria
  • Monge, Rosa
  • Virumbrales-Muñoz, Maria
  • Llamazares, Guillermo A.
  • Hernández-Laín, A.
  • Sánchez-Gómez, Pilar
  • Pérez-García, Victor
  • Fernández, Luis
  • Ochoa, Ignacio
Introduction: Hypercellular regions surrounding necrotic areas in glioblastoma (GBM), named pseudopalisades, are characteristic of these tumors and have been hypothesized to be waves of migrating GBM cells. These structures are thought to be induced by oxygen depletion caused by the accumulation of cells far from nutrient supplies (chronic hypoxia) and/or tumor-induced blood vessel occlusion (acute hypoxia). The universal appearance of these structures in GBM suggests that they may play an instrumental role in their spreading and invasion. However the validation of the mechanisms of pseudopalisade formation has remained challenging. Materials and methods: A mathematical model was developed incorporating the main mechanisms of pseudopalisade formation. Oxygen coming from straight vessels drives phenotype changes. A third phenotype was included accounting for hypoxic cells switching back to a more proliferative phenotype in regions of normoxia. Experiments were done by embedding different densities of U-251 MG cells within a collagen hydrogel in a custom-designed microfluidic device. By controlling the medium flow through lateral microchannels, we mimic and control blood-vessel obstruction events associated with this disease. Results: Nutrient and oxygen starvation triggered a strong migratory process leading to pseudopalisade generation in silico and in vitro. Also, cells at greatest distance from oxygen supply became hypoxic after a critical point in tumor growth was reached (due to increased metabolism) forming pseudopalisades both in silico and in vitro. All the elements included in the mathematical model were necessary to describe both types of phenomena pointing out to the insufficiency of the go-or-grow hypothesis to describe pseudopalisade formation on-chip. Conclusions: Using a combination of computational and experimental techniques, we proved the feasibility of the two hypotheses of pseudopalisade formation, driven by either acute or chronic hypoxia. Additionally, we verified the potential of microfluidic devices as advanced artificial systems capable of experimentally modeling nutrient and oxygen gradients during tumor evolution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tunable injectable alginate-based hydrogel for cell therapy in Type 1 Diabetes Mellitus

  • Espona-Noguera, A.
  • Ciriza, J.
  • Cañibano-Hernández, A.
  • Fernandez, L.
  • Ochoa, I.
  • Saenz del Burgo, L.
  • Pedraz, J.L.
Islet transplantation has the potential of reestablishing naturally-regulated insulin production in Type 1 diabetic patients. Nevertheless, this procedure is limited due to the low islet survival after transplantation and the lifelong immunosuppression to avoid rejection. Islet embedding within a biocompatible matrix provides mechanical protection and a physical barrier against the immune system thus, increasing islet survival. Alginate is the preferred biomaterial used for embedding insulin-producing cells because of its biocompatibility, low toxicity and ease of gelation. However, alginate gelation is poorly controlled, affecting its physicochemical properties as an injectable biomaterial. Including different concentrations of the phosphate salt Na2HPO4 in alginate hydrogels, we can modulate their gelation time, tuning their physicochemical properties like stiffness and porosity while maintaining an appropriate injectability. Moreover, these hydrogels showed good biocompatibility when embedding a rat insulinoma cell line, especially at low Na2HPO4 concentrations, indicating that these hydrogels have potential as injectable biomaterials for Type 1 Diabetes Mellitus treatment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enabling cell recovery from 3D cell culture microfluidic devices for tumour microenvironment biomarker profiling

  • Virumbrales-Muñoz, M.
  • Ayuso, J.M.
  • Lacueva, A.
  • Randelovic, T.
  • Livingston, M.K.
  • Beebe, D.J.
  • Oliván, S.
  • Pereboom, D.
  • Doblare, M.
  • Fernández, L.
  • Ochoa, I.
The tumour microenvironment (TME) has recently drawn much attention due to its profound impact on tumour development, drug resistance and patient outcome. There is an increasing interest in new therapies that target the TME. Nonetheless, most established in vitro models fail to include essential cues of the TME. Microfluidics can be used to reproduce the TME in vitro and hence provide valuable insight on tumour evolution and drug sensitivity. However, microfluidics remains far from well-established mainstream molecular and cell biology methods. Therefore, we have developed a quick and straightforward collagenase-based enzymatic method to recover cells embedded in a 3D hydrogel in a microfluidic device with no impact on cell viability. We demonstrate the validity of this method on two different cell lines in a TME microfluidic model. Cells were successfully retrieved with high viability, and we characterised the different cell death mechanisms via AMNIS image cytometry in our model.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modulation of antioxidant potential with coenzyme Q10 suppressed invasion of temozolomide-resistant rat glioma in vitro and in vivo

  • Buric, S.S.
  • Podolski-Renic, A.
  • Dinic, J.
  • Stankovic, T.
  • Jovanovic, M.
  • Hadžic, S.
  • Ayuso, J.M.
  • Virumbrales-Muñoz, M.
  • Fernández, L.J.
  • Ochoa, I.
  • Pérez-García, V.M.
  • Pešic, M.
The main reasons for the inefficiency of standard glioblastoma (GBM) therapy are the occurrence of chemoresistance and the invasion of GBM cells into surrounding brain tissues. New therapeutic approaches obstructing these processes may provide substantial survival improvements. The purpose of this study was to assess the potential of lipophilic antioxidant coenzyme Q10 (CoQ10) as a scavenger of reactive oxygen species (ROS) to increase sensitivity to temozolomide (TMZ) and suppress glioma cell invasion. To that end, we used a previously established TMZ-resistant RC6 rat glioma cell line, characterized by increased production of ROS, altered antioxidative capacity, and high invasion potential. CoQ10 in combination with TMZ exerted a synergistic antiproliferative effect. These results were confirmed in a 3D model of microfluidic devices showing that the CoQ10 and TMZ combination is more cytotoxic to RC6 cells than TMZ monotherapy. In addition, cotreatment with TMZ increased expression of mitochondrial antioxidant enzymes in RC6 cells. The anti-invasive potential of the combined treatment was shown by gelatin degradation, Matrigel invasion, and 3D spheroid invasion assays as well as in animal models. Inhibition of MMP9 gene expression as well as decreased N-cadherin and vimentin protein expression implied that CoQ10 can suppress invasiveness and the epithelial to mesenchymal transition in RC6 cells. Therefore, our data provide evidences in favor of CoQ10 supplementation to standard GBM treatment due to its potential to inhibit GBM invasion through modulation of the antioxidant capacity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Force spectroscopy-based simultaneous topographical and mechanical characterization to study polymer-to-polymer interactions in coated alginate microspheres

  • Virumbrales Muñoz, María
  • Santos Vizcaíno, Edorta
  • Paz, Laura
  • Gallardo-Moreno, Amparo María
  • Orive, Gorka
  • Hernández, Rosa María
  • Doblaré, Manuel
  • Gonzalez-Martin, Maria Luisa
  • Fernández, Luis Jose
  • Pedraz, Jose Luis
  • Ochoa, Ignacio
Cell-laden hydrogel microspheres have shown encouraging outcomes in the fields of drug delivery, tissue engineering or regenerative medicine. Beyond the classical single coating with polycations, many other different coating designs have been reported with the aim of improving mechanical properties and in vivo performance of the microspheres. Among the most common strategies are the inclusion of additional polycation coatings and the covalent bonding of the semi-permeable membranes with biocompatible crosslinkers such as genipin. However, it remains challenging to characterize the effects of the interactions between the polycations and the hydrogel microspheres over time in vitro. Here we use a force spectroscopy-based simultaneous topographical and mechanical characterization to study polymer-to-polymer interactions in alginate microspheres with different coating designs, maintaining the hydrogels in liquid. In addition to classical topography parameters, we explored, for the first time, the evolution of peak/valley features along the z axis via thresholding analysis and the cross-correlation between topography and stiffness profiles with resolution down to tens of nanometers. Thus, we demonstrated the importance of genipin crosslinking to avoid membrane detachment in alginate microspheres with double polycation coatings. Overall, this methodology could improve hydrogel design rationale and expedite in vitro characterization, therefore facilitating clinical translation of hydrogel-based technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Advanced technological tools to study multidrug resistance in cancer

  • Andrei, Luca
  • Kasas, Sandor
  • Ochoa Garrido, Ignacio
  • Stankovic, Tijana
  • Suárez Korsnes, Mónica
  • Vaclavikova, Radka
  • Assaraf, Yehuda G.
  • Pešic, Milica
The complexity of cancer biology and its clinical manifestation are driven by genetic, epigenetic, transcriptomic, proteomic and metabolomic alterations, supported by genomic instability as well as by environmental conditions and lifestyle factors. Although novel therapeutic modalities are being introduced, efficacious cancer therapy is not achieved due to the frequent emergence of distinct mechanisms of multidrug resistance (MDR). Advanced technologies with the potential to identify and characterize cancer MDR could aid in selecting the most efficacious therapeutic regimens and prevent inappropriate treatments of cancer patients. Herein, we aim to present technological tools that will enhance our ability to surmount drug resistance in cancer in the upcoming decade. Some of these tools are already in practice such as next-generation sequencing. Identification of genes and different types of RNAs contributing to the MDR phenotype, as well as their molecular targets, are of paramount importance for the development of new therapeutic strategies aimed to enhance drug response in resistant tumors. Other techniques known for many decades are in the process of adaptation and improvement to study cancer cells’ characteristics and biological behavior including atomic force microscopy (AFM) and live-cell imaging. AFM can monitor in real-time single molecules or molecular complexes as well as structural alterations occurring in cancer cells induced upon treatment with various antitumor agents. Cell tracking methodologies and software tools recently progressed towards quantitative analysis of the spatio-temporal dynamics of heterogeneous cancer cell populations and enabled direct monitoring of cells and their descendants in 3D cultures. Besides, novel 3D systems with the advanced mimicking of the in vivo tumor microenvironment are applicable to study different cancer biology phenotypes, particularly drug-resistant and aggressive ones. They are also suitable for investigating new anticancer treatment modalities. The ultimate goal of using phenotype-driven 3D cultures for the investigation of patient biopsies as the most appropriate in vivo mimicking model, can be achieved in the near future.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Force spectroscopy imaging and constriction assays reveal the effects of graphene oxide on the mechanical properties of alginate microcapsules

  • Virumbrales-Muñoz, María
  • Paz-Artigas, Laura
  • Ciriza, Jesús
  • Alcaine, Clara
  • Espona-Noguera, Albert
  • Doblaré, Manuel
  • Sáenz del Burgo, Laura
  • Ziani, Kaoutar
  • Pedraz, José Luis
  • Fernández, Luis
  • Ochoa, Ignacio
Microencapsulation of cells in hydrogel-based porous matrices is an approach that has demonstrated great success in regenerative cell therapy. These microcapsules work by concealing the exogenous cells and materials in a robust biomaterial that prevents their recognition by the immune system. A vast number of formulations and additives are continuously being tested to optimize cell viability and mechanical properties of the hydrogel. Determining the effects of new microcapsule additives is a lengthy process that usually requires extensive in vitro and in vivo testing. In this paper, we developed a workflow using nanoindentation (i.e., indentation with a nanoprobe in an atomic force microscope) and a custom-built microfluidic constriction device to characterize the effect of graphene oxide (GO) on three microcapsule formulations. With our workflow, we determined that GO modifies the microcapsule stiffness and surface properties in a formulation-dependent manner. Our results also suggest, for the first time, that GO alters the conformation of the microcapsule hydrogel and its interaction with subsequent coatings. Overall, our workflow can infer the effects of new additives on microcapsule surfaces. Thus, our workflow can contribute to diminishing the time required for the validation of new microcapsule formulations and accelerate their clinical translation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thermoplastic elastomer with advanced hydrophilization and bonding performances for rapid (30 s) and easy molding of microfluidic devices

  • Lachaux, J.
  • Alcaine, C.
  • Gómez-Escoda, B.
  • Perrault, C.M.
  • Duplan, D.O.
  • Wu, P.Y.J.
  • Ochoa, I.
  • Fernandez, L.
  • Mercier, O.
  • Coudreuse, D.
  • Roy, E.
One of the most important areas of research on microfluidic technologies focuses on the identification and characterisation of novel materials with enhanced properties and versatility. Here we present a fast, easy and inexpensive microstructuration method for the fabrication of novel, flexible, transparent and biocompatible microfluidic devices. Using a simple hot press, we demonstrate the rapid (30 s) production of various microfluidic prototypes embossed in a commercially available soft thermoplastic elastomer (sTPE). This styrenic block copolymer (BCP) material is as flexible as PDMS and as thermoformable as classical thermoplastics. It exhibits high fidelity of replication using SU-8 and epoxy master molds in a highly convenient low-isobar (0.4 bar) and iso-thermal process. Microfluidic devices can then be easily sealed using either a simple hot plate or even a room-temperature assembly, allowing them to sustain liquid pressures of 2 and 0.6 bar, respectively. The excellent sorption and biocompatibility properties of the microchips were validated via a standard rhodamine dye assay as well as a sensitive yeast cell-based assay. The morphology and composition of the surface area after plasma treatment for hydrophilization purposes are stable and show constant and homogenous distribution of block nanodomains (~22° after 4 days). These domains, which are evenly distributed on the nanoscale, therefore account for the uniform and convenient surface of a "microfluidic scale device". To our knowledge, this is the first thermoplastic elastomer material that can be used for fast and reliable fabrication and assembly of microdevices while maintaining a high and stable hydrophilicity.