Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Method for extraction of microcrystals based on focused electron/ion beam processing and their magnetotransport characterization

  • Sáenz- Hernández, Amaia
  • Sangiao, Soraya
  • Balakrishnan, Geetha
  • Teresa, José María de
We propose a new in situ microfabrication method using focused electron/ion beam processing to study the influence of crystal orientation on magnetotransport properties. Previous studies obtained microcrystals extracted from bulk single crystals with the out-of-plane crystallographic axis−→c perpendicular to the applied magnetic field −→B and parallel to the current flow. The new method orients −→c parallel to −→B and perpendicular to the current. Magnetotransport measurements at 2 K on Bi2Se3 samples fabricated using both methods reveal differences in zero-field resistivity and charge carrier mobility, demonstrating the impact of the crystal orientation in which the microcrystal is extracted on the electrical transport properties., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., The authors acknowledge grant PID2020-112914RB-I00 and PID2023-146451OB-I00, funded by MCIN/AEI/https://doi.org/10.13039/501100011033, and CSIC through Research Platform PTI-001. The doctoral fellowship (A. S. H.), PRE2022-103314, associated with project CEX2021-001144-S-20–9, also from CSIC, is also acknowledged. The work at the University of Warwick was supported by EPSRC, UK, through grant EP/T005963/1., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001144-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cryogenic focused ion beam milling to investigate the anisotropic magnetotransport properties of bismuth microcrystals

  • Sáenz- Hernández, Amaia
  • Sangiao, Soraya
  • Felser, Claudia
  • Shekhar, Chandra
  • Pardo, José A.
  • Ibarra, Alfonso
  • Teresa, José María de
Early View, The data that support the findings of this study are available from the corresponding author upon reasonable request., Bulk single crystals exhibit the intrinsic properties of a given compound, but studying their anisotropic magnetotransport properties is challenging. Focused Ion Beam (FIB) milling at room temperature has been previously used to guide the electrical current path along a defined crystal direction or to extract microcrystals where the electrical current flows along a known direction. However, some materials, such as bismuth, melt under FIB irradiation. Bismuth, known for its unique properties, including very large magnetoresistance and a highly anisotropic Fermi surface, reacts to room-temperature Ga+ FIB irradiation, forming droplets on its surface. Therefore, a novel microfabrication approach based on cryogenic FIB milling is developed here. By using a Peltier stage or an integrated cryogenic module, surface melting is mitigated below −30 °C. Microscale slabs are extracted, either parallel or perpendicular to the single crystal surface, then shaped and electrically contacted in a chip for magnetotransport characterization. The large magnetoresistance observed along with Shubnikov–de Haas oscillations with single periodicity when current is applied perpendicular to the c axis, highlights the success of the approach. These results enable FIB microfabrication of single crystals that are sensitive to FIB irradiation and investigation of the anisotropic magnetotransport properties in microcrystals., The authors would also like to thank the Laboratory for Advanced Microscopies (LMA) and the Institute of Nanoscience and Materials of Aragón (INMA), from CSIC–Universidad de Zaragoza, for providing access to their instruments and expertise. Additionally, the authors are grateful to the ELECMI network for granting free access through a competitive call to the Helios 650 system through project ELC529-2025. Technical support from the LMA technicians at Universidad de Zaragoza is acknowledged, with special thanks to L. Casado for her assistance with the nanofabrication procedures involving the Dual Beam system. Additionally, the Physical Measurements Service from Servicio General de Apoyo a la Investigación (SAI) at the University of Zaragoza is also acknowledged. Lastly the authors would like to acknowledge the following founding sources: grant PID2020-112914RB-I00 and PID2023-146451OB-I00, funded by MCIN/AEI/10.13039/501100011033 and CSIC through Research Platform PTI-001; the doctoral fellowship for A.S.H. PRE2022-103314, associated with the CSIC project CEX2021-001144-S-20-9, funded by MCIN/AEI/10.13039/501100011033; grant E13_23R, funded by Gobierno de Aragón; and grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001144-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physics-informed neural networks with dynamical boundary constraints

  • Martínez-Esteban, Andrés
  • Calvo-Barlés, Pablo
  • Martín-Moreno, Luis
  • Rodrigo, Sergio G.
Data availability: All PINNs developed for this study were implemented using the Keras and TensorFlow libraries. An example implementation of the proposed method is available at GitHub repository (https://github.com/IrisFDTD/Physics-Informed-Neural-Networks-with-Dynamical-Boundary-Constraints.git). The repository contains a simplified version of the code that is sufficient to reproduce the core methodology., Physics-informed neural networks (PINNs) are numerical solvers that embed all the physical information of a system into the loss function of a neural network. In this way, the learned solution accounts for data (if available), the governing differential equations, or any other constraint known of the physical problem. However, they face serious issues, notably their tendency to converge on trivial or misleading solutions. The latter occurs when, although the loss function reaches low values, the model makes incorrect predictions. These difficulties become especially significant in differential equations involving multiscale behavior, such as those containing rapidly varying terms, as well as in problems whose solutions exhibit strong oscillatory behavior. To address these challenges, we introduce the Dynamical Boundary Constraint (DBC) algorithm, which imposes restrictions on the loss function based on prior training of the PINN. To demonstrate its applicability, we tested this approach on examples of different areas of physics., The Spanish “Ministerio de Ciencia, Innovación y Universidades” supports and funds this work, MICIU/AEI/10.13039/501100011033 under Grants No. PID2023-148359NB-C21 (also funded by FEDER, UE), No. CEX2023-001286-S (Severo Ochoa Centers of Excellence) and CEX2021-001144-S-20-10 (predoctoral research fellowship). We also acknowledge the Aragón Regional Government through project QMAD (E09_23R)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001144-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Method for extraction of microcrystals based on focused electron/ion beam processing and their magnetotransport characterization

  • Sáenz-Hernández, Amaia
  • Sangiao, Soraya
  • Balakrishnan, Geetha
  • De Teresa, José María
We propose a new in situ microfabrication method using focused electron/ion beam processing to study the influence of crystal orientation on magnetotransport properties. Previous studies obtained microcrystals extracted from bulk single crystals with the out-of-plane crystallographic axis [símbolo] perpendicular to the applied magnetic field [símbolo] and parallel to the current flow. The new method orients [símbolo] parallel to [símbolo] and perpendicular to the current. Magnetotransport measurements at 2 K on Bi2Se3 samples fabricated using both methods reveal differences in zero-field resistivity and charge carrier mobility, demonstrating the impact of the crystal orientation in which the microcrystal is extracted on the electrical transport properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Cryogenic Focused Ion Beam Milling to Investigate the Anisotropic Magnetotransport Properties of Bismuth Microcrystals

  • Sáenz-Hernández, Amaia
  • Sangiao, Soraya
  • Felser, Claudia
  • Shekhar, Chandra
  • Pardo, José Ángel
  • Ibarra, Alfonso
  • De Teresa, José María
Bulk single crystals exhibit the intrinsic properties of a given compound, but studying their anisotropic magnetotransport properties is challenging. Focused Ion Beam (FIB) milling at room temperature has been previously used to guide the electrical current path along a defined crystal direction or to extract microcrystals where the electrical current flows along a known direction. However, some materials, such as bismuth, melt under FIB irradiation. Bismuth, known for its unique properties, including very large magnetoresistance and a highly anisotropic Fermi surface, reacts to room‐temperature Ga+ FIB irradiation, forming droplets on its surface. Therefore, a novel microfabrication approach based on cryogenic FIB milling is developed here. By using a Peltier stage or an integrated cryogenic module, surface melting is mitigated below −30 °C. Microscale slabs are extracted, either parallel or perpendicular to the single crystal surface, then shaped and electrically contacted in a chip for magnetotransport characterization. The large magnetoresistance observed along with Shubnikov–de Haas oscillations with single periodicity when current is applied perpendicular to the c axis, highlights the success of the approach. These results enable FIB microfabrication of single crystals that are sensitive to FIB irradiation and investigation of the anisotropic magnetotransport properties in microcrystals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Physics-informed neural networks with dynamical boundary constraints

  • Martínez-Esteban, Andrés
  • Calvo-Barlés, Pablo
  • Martín-Moreno, Luis
  • Gutierrez Rodrigo, Sergio
Physics-informed neural networks (PINNs) are numerical solvers that embed all the physical information of a system into the loss function of a neural network. In this way, the learned solution accounts for data (if available), the governing differential equations, or any other constraint known of the physical problem. However, they face serious issues, notably their tendency to converge on trivial or misleading solutions. The latter occurs when, although the loss function reaches low values, the model makes incorrect predictions. These difficulties become especially significant in differential equations involving multiscale behavior, such as those containing rapidly varying terms, as well as in problems whose solutions exhibit strong oscillatory behavior. To address these challenges, we introduce the Dynamical Boundary Constraint (DBC) algorithm, which imposes restrictions on the loss function based on prior training of the PINN. To demonstrate its applicability, we tested this approach on examples of different areas of physics.