Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adiabatic and deterministic routes to soliton combs in non-Hermitian Kerr cavities

  • Ivars, Salim B.
  • Artigas, David
  • Mas-Arabi, Carlos|||0000-0001-5564-5365
  • Milián Enrique, Carles|||0000-0001-8492-366X
[EN] We present a cardinal solution for the long-standing and fundamental problem associated with the adiabatic, reversible, and controlled excitation of both dark and bright solitons in Kerr microresonators with normal group-velocity dispersion. Our findings stem from the inclusion of a localized non-Hermitian potential, which we use to drastically reshape the characteristic collapsed snaking structure associated with such solitons. Consequently, we demonstrate a snaking-free bifurcation landscape where solitons of all possible widths are continuously connected via the dynamic change of the cavity detuning, and hence dissipative localized states of unprecedentedly high pump-to-comb conversion efficiencies can be excited in an adiabatic, deterministic, and reversible fashion. Our fundamental discovery has practical implications of paramount importance for frequency comb generation in all-normal dispersion cavities, which are key to comb generation in most spectral regions away from the telecom bands., This work was partially supported by the Ministeriode Economiay Competitividad, funded byMCIN/AEI/10.13039/501100011033/FEDER, Agencia Estatal de Investigacion (PID2022-138280NB-I00) , Agencia de Gestio d'Ajuts Universitaris i de Recerca (2021 SGR 01448) , CEX2024-001490-S [MICIU/AEI/10.13039/501100011033] , Fundacio Cellex, Fundacio Mir-Puig, and Generalitat de Catalunya through CERCA. C.M. acknowledges the Spanish government EUR2025-165039 (Europa Excellence) , ALLEGRO PID2021-124618NB-C21 and INCEPTION PID2024-157370NB-I00, C.M.A. acknowledges funding from the Ministerio de Universidades through the Beatriz Galindo program (BG22/00025) .
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ engineering hexagonal boron nitride in van der Waals heterostructures with selective SF6 etching

  • Agarwal, Hitesh
  • Reserbat-Plantey, Antoine
  • Barcons Ruiz, David
  • Soundarapandian, Karuppasamy
  • Li, Geng
  • Mkhitaryan, Vahagn
  • Osmond, Johann
  • Lozano, Helena
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Stepanov, Petr
  • Koppens, Frank H. L.
  • Krishna Kumar, Roshan
Van der Waals heterostructures are at the forefront in materials heterostructure engineering, offering the ultimate control in layer selectivity and capability to combine virtually any material. Hexagonal-boron nitride, the most commonly used dielectric material, has proven indispensable in this field, allowing the encapsulation of active 2D materials preserving their exceptional electronic quality. However, not all device applications require full encapsulation but rather require open surfaces, or even selective patterning of hBN layers. Here, we report on a procedure to engineer top hBN layers within van der Waals heterostructures while preserving the underlying active 2D layers. Using a soft selective SF<inf>6</inf> etching combined with a series of pre—and post-etching treatments, we demonstrate that pristine surfaces can be exposed with atomic scale flatness while preserving the active layers’ electronic quality. We benchmark our technique using graphene/hBN Hall bar devices. Using Raman spectroscopy combined with quantum transport, we show high quality can be preserved in etched regions by demonstrating low temperature carrier mobilities > 200,000 cm<sup>2</sup>V<sup>-1</sup>s<sup>−1</sup>, ballistic transport probed through magnetic focusing, and intrinsic room temperature phonon-limited mobilities. Atomic force microscopy brooming and O<inf>2</inf> plasma cleaning are identified as key pre-etching steps for obtaining pristine open surfaces while preserving electronic quality. The technique provides a clean method for opening windows into mesoscopic van der Waals devices that can be used for local probe experiments, patterning top hBN in-situ, and exposing 2D layers to their environment for sensing applications., We would like to thank Carmen Rubio-Verdú (ICFO), Tymofiy Khodkov (ICFO), Lene Gammelgaard (DTU), Juan Sierra, Patricia Aguilar, Sergio Valenzuela (ICN2) and Qian Yang (University of Manchester) for important insights and useful discussions. We further thank Matteo Ceccanti for making the illustration presented in figure 1. H.A. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant Agreement No. 665884. A.R.-P. acknowledges funding from ANR JCJC NEAR-2D and Welcome Package Idex (UniCA) as well as AAP Tremplin Complex 2023 ‘2DNEUROTWIST’ (ANR-15-IDEX-01). R.K.K. acknowledges funding by MCIN/AEI/10.13039/501100011033 and by the ‘European Union NextGenerationEU/PRTR’ PCI2021-122020-2A within the FLAG-ERA grant [PhotoTBG], by ICFO, RWTH Aachen and ETHZ/Department of Physics. R. K. K. also acknowledges support from the Ramon y Cajal Grant RYC2022-036118-I funded by MICIU/AEI/10.13039/501100011033 and by ‘ESF+’. F.H.L.K. acknowledges support from the Gordon and Betty Moore Foundation through Grant GBMF12212, and the Government of Spain (QTWIST RD0768/2022, PID2022-141081NB-I00; Severo Ochoa CEX2019-000910-S, and CEX2024- 001490-S [MCIN/ AEI/10.13039/501100011033). This work was also supported by the European Union NextGenerationEU/PRTR (PRTR-C17.I1) and EXQIRAL 101131579, Fundació Cellex, Fundació Mir-Puig, Generalitat de Catalunya (CERCA, Department of Digital Policies and Territory, AGAUR, 2021 SGR 014431656), and BBVA Foundation 2022 Fundamentals Program (An Electronic Quantum Simulator). Views and opinions expressed are those of the author(s) only and do not necessarily reflect those of the European Union Research Executive Agency. Neither the European Union nor the granting authority can be held responsible for them. This material is based upon work supported by the Air Force Office of Scientific Research under Award Number FA8655-23-1-7047. Any opinions, findings, conclusions, or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the United States Air Force., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2019-000910-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2024-001490-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-speed graphene-based sub-terahertz receivers enabling wireless communications for 6G and beyond

  • Soundarapandian, Karuppasamy
  • Castilla, Sebastián
  • Koepfli, Stefan M.
  • Marconi, Simone
  • Kulmer, Laurenz
  • Vangelidis, Ioannis
  • Bastida, Ronny de la
  • Rongione, Enzo
  • Terrés, Bernat
  • Tongay, Seth Ariel
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Lidorikis, Elefterios
  • Tielrooij, Klaas-Jan
  • Leuthold, Juerg
  • Koppens, Frank H. L.
Wireless data traffic has grown at an unprecedented rate, creating an urgent need for innovative solutions to overcome current technological limitations. Sub-terahertz (sub-THz) carrier frequencies offer increased capacity and low attenuation for short-range wireless applications. Here, we demonstrate sub-THz receivers based on graphene, which offer several advantages over state-of-the-art sub-THz receivers, such as a direct detection scheme, passive operation, and compactness. We exploit multiple concepts incorporated into a single device, including a high-quality sub-THz cavity placed in the vicinity of a high-mobility graphene channel to overcome its intrinsically low absorption. The graphene receivers achieve a multigigabit-per-second data rate with a maximum distance of  ~ 3 m from the transmitter. We demonstrate a trade-off between bandwidth and responsivity: a setup-limited 40 GHz bandwidth in low-responsivity devices, and a maximum responsivity of 0.16 A/W in devices with a 2 GHz bandwidth. Our findings enable applications such as chip-to-chip communication and close-proximity device-to-device communication., The authors thank ICFO nanofabrication lab for fruitful discussions. F.H.L.K. acknowledges support from the Gordon and Betty Moore Foundation through Grant GBMF12212, and from the Government of Spain (QTWIST RD0768/2022, PID2022-141081NB-I00, Severo Ochoa CEX2019-000910-S, and CEX2024-001490-S [MCIN/ AEI/10.13039/501100011033]). This work was also supported by the European Union NextGenerationEU/PRTR (PRTR-C17.I1), PCI2021-122020-2A within the FLAG-ERA grant [PhotoTBG] and EXQIRAL 101131579. Further financial support was provided by Fundació Cellex, Fundació Mir-Puig, and the Generalitat de Catalunya (CERCA, Department of Digital Policies and Territory, AGAUR, 2021 SGR 014431656). Furthermore, the research leading to these results has received funding from the European Union Seventh Framework Programme under grant agreement no.785219 and no. 881603 Graphene Flagship for Core2 and Core3. K.J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 101125457 (ERC CoG “EQUATE”). ICN2 is funded by the CERCA Programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. Preliminary results-i.e., optimization of the electrical performance of the various heterostructures-were supported by the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 101034929. S.C., S.M., K.P.S., and F.H.L.K. acknowledge PDC2022-133844-I00, funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. S.C., K.P.S., and F.H.L.K. acknowledge funding by the European Union (ERC, TERACOMM, 101113529), which supported the results obtained from devices D1 to D6. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council Executive Agency. Neither the European Union nor the granting authority can be held responsible for them. This material is based upon work supported by the Air Force Office of Scientific Research under award number FA8655-23-1-7047. Any opinions, findings and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the U.S. Department of Defense., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2019-000910-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2024-001490-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering low-symmetry colloidal crystals with optical anisotropies

  • Lin, Haixin
  • Lee, Sangmin
  • Mkhitaryan, Vahagn
  • Sánchez-Iglesias, Ana
  • Grzelczak, Marek
  • Sun, Lin
  • Lee, Byeongdu
  • Wang, Shunzhi
  • Zhou, Wenjie
  • Van Duyne, Richard
  • Liz-Marzán, Luis Manuel
  • García de Abajo, Francisco Javier
  • Glotzer, Sharon C.
  • Mirkin, Chad A.
Lin et al., This work was supported by the following: Air Force Office of Scientific Research award FA9550-22-1-0300 (to C.A.M.); Spanish Ministry of Science and Innovation grant nos. PID2020-116627RB-C21 and PID2020-116627RB-C22 (to F.O., J.M.T., D.M.S., and V.F.M.); ERDF and the Galician Regional Government as part of the agreement for funding the Atlantic Research Center for Information and Communication Technologies (AtlanTTIC) (to F.O., J.M.T., D.M.S., and V.F.M.); ERDF and the Extremadura Regional Government grant nos. IB18073 and GR21072 (to F.O., J.M.T., D.M.S., and V.F.M.); Spanish Ministry of Universities under a María Zambrano Grant (to D.M.S.); European recovery Next Generation EU fund under project MS-26, RD 289/2021 Margarita Salas UEx (to V.F.M.); Spanish MICINN PID2024-157421NB-I00 and Severo Ochoa CEX2024-001490-S, and the Catalan CERCA Program (to F.J.G.d.A.); Spanish Ministry of Science and Innovation grant no. PID2020-117779R (to L.M.L.-M.); Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency grant no. MDM-2017-0720 (to L.M.L.-M.); and European Research Council (ERC) Synergy grant no. 101166855 CHIRAL-PRO (to L.M.L.-M.)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001490-S)., This work was supported as part of the Center for Bio-Inspired Energy Science, an Energy Frontier Research Center funded by the Department of Energy, Office of Science, Basic Energy Sciences under award no. DE-SC0000989 (for NP synthesis and theory and simulation). This work made use of the EPIC facility (NUANCE Center-Northwestern University), which has received support from the MRSEC program (NSF DMR-1121262) at the Materials Research Center, the International Institute for Nanotechnology (IIN), and the State of Illinois, through the IIN. This work used the Extreme Science and Engineering Discovery Environment (XSEDE) (64), which is supported by the National Science Foundation grant number ACI-1548562 and XSEDE award DMR 140129. Computational resources and services were also provided by Advanced Research Computing at the University of Michigan, Ann Arbor. This research used resources of the Advanced Photon Source, a US Department of Energy (DOE) Office of Science user facility at Argonne National Laboratory, and is based on research supported by the US DOE Office of Science-Basic Energy Sciences under contract no. DE-AC02-06CH11357., Peer reviewed