Pasar al contenido principal

MODELOS DIAGENETICOS EN FORMACIONES Y CUENCAS EVAPORITICAS

CGL2009-11096

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE BARCELONA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Gypsum cement microstructures in fractures related with extensional event (Vilobí gypsum unit, Vallès - Penedès Basin, Miocene, NE Spain)

  • Moragas, Mar
  • Martínez Rodríguez, Cristina
  • Baqués, Vinyet
  • Alías, G.
  • Playà, E.
Deformation mechanisms, Rheology and Tectonics 2011, 31 agosto- 2 septiembre 2011, Oviedo, Microstructural studies focused on gypsum cements precipitated along faults within evaporite host bodies are scarce. This is the main focus of this work, which has made it necessary to use concepts that are not typically applied to evaporite rocks and cements. The Vilobí Gypsum Unit (Upper Burdigalian) is located in the Penedès half-graben, NE Iberian Peninsula. The half-graben is limited by ENE¿WSW normal faults formed during the Neogene rifting stage of west Mediterranean area. The Vilobí unit consists of a succession up to 60 m thick of laminated to banded secondary (coming from anhydrite hydration) and primary gypsum that has been affected by two main deformation events: a ductile deformation represented by folds, millimetres to decimetres in size, which were produced during the early diagenesis, and a fragile deformation event related with the Neogene rifting. The later event affected the evaporite unit resulting in five sets of fractures of different time formation according to the cross-cutting relation (arranged chronologically from oldest to youngest): - Set 1 (S1) consists of NE-SW trending extensional faults. - Set 2 (S2) comprises a normal faults system with ENE-WSW trending. - Set 3 (S3) formed by subvertical NW-dipping joints. - Set 4 (S4) represented by NE-SW to ENE-WSW trending thrust faults. - Set 5 (S5) comprises a SE-dipping system joints. All fractures are refilled by gypsum cements with a large variety of deformation textures. It has been possible to observe direct relationship between main structures and microscopically observations of deformed samples. It could be established 4 stages of fracturing which reaffirm the chronology of precipitation and deformation defined at the outcrop scale. - 1st Stage: Extensive context with active normal faults (S1 and S2). Antitaxial growths of fibrous gypsum cement indicating a shear sense in agreement with normal displacement, and incorporation of host-gypsum fragments and fish type crystals in shear zone. - 2nd Stage: Tectonically stable stage with dilatation veins (S3) formation and precipitation of millimetre gypsum crystals. - 3rd Stage: Compressive stage determined by outcrop indicators (S4), which represents reactivation of S1 and S2 faults. In that stage appear broken gypsum fibres and small gypsum fragments around irregular boundary of millimetre gypsum crystals. - 4th Stage: Karstic regime in a relatively stable tectonic stage (S5). Megacrystalline gypsum cements precipitation with crystals up to 25 cm in size. These crystals show some indicators of small extensive stages as small oriented crystals (recrystallized) fragments in crystal boundaries, suggesting gentle tectonic reactivation events. Minor deformations such as internal crystalline dislocations, grain contact and internal recrystallizations occur in millimetre gypsum crystals and megacrystalline cement. Sulphur and oxygen isotope values indicate that gypsum cements were produced by sulphatesrich fluids which flow through the fragile structures after an interaction with host-gypsum rock. Consequently, it is significant that antitaxial growth of gypsum fibres in veins occurs in a host-rock with the same lithology, because this type of growth is common where the vein fill is different from the composition host-rock., The present work was supported by the Spanish Government projects CGL2010-18260 and CGL2009-11096 and by grup Consolidat de Recerca "Geologia Sedimentaria" (2009 SGR-1458)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Sedimentary and Diagenetic Processes in the Las Minas De Hellín Gypsum Unit (Upper Miocene, Se Spain).

  • Moragas, Mar
  • Playà, E.
  • Rosell, L.
  • Inglès, M.
28th IAS meeting of Sedimentology, 5-8/7 2011 ,Zaragoza, Spain, The Las Minas de Hellín Gypsum unit (Upper Miocene) in the Las Minas – Camarillas basin (Albacete and Murcia provinces, SE Spain) is studied from the petrological, sedimentological and geochemical points of view in order to interpret the sedimentary and diagenetic processes that affected it. This unit comprises primary evaporites accompanied by a wide variety of diagenetic products, including native sulphur. The primary evaporite lithofacies (i.e., laminated gypsilutites, banded gypsarenites and selenitic gypsum) are associated with host bacterially induced dolomite (!13CVPDB from -7.45 to +1.95 ‰ and !18OVPDB from +1.54 to +9.20 ‰) and organic matter. The petrological and geochemical characteristics of the primary gypsum facies are in agreement with deposition in a perennial shallow saline lake. The sulphate isotope compositions (!34SVCDT from +13.2 to +18.8 ‰ and !18OVSMOW from +20.7 to 26.1‰) suggest a dominant contribution of recycled Triassic sulphate in the brines. However, redox processes associated with sulfate-reducing bacterial activity and marine contributions to the basin have also to be considered. The 87Sr/86Sr ratios of some samples (+0.708086 and +0.708979) may be consistent either with marine incursions or with hydrothermal contribution associated with Late Miocene volcanic episode in the basin. Bacterial activity was a key process in the sedimentation and diagenetic evolution of the unit and resulted in the formation of native sulphur (!34SVCDT from -10.7 to -27.6‰). Besides sulphur, two types of diagenetic gypsum were identified: 1) Megacrystalline secondary gypsum derived from hydration of precursor anhydrite, which occurs only locally; 2) Diagenetic gypsum originated from native sulphur oxidation, as suggested by its sulphate isotope composition (mean values !34SVCDT -16.2‰ and !18OVSMOW 16.95‰) and by its textural characteristics (coarse- crystalline anhedral texture with high porosity). A significant silicification, related to the magmatic activity that affected the basin, occurred in the upper part of the unit and resulted in the formation of nodules, crusts and thin layers (mainly chalcedony). Moreover, diagenetic carbonates (sparry calcite) with meteoric isotope signature (!18OVPDB from -1.72‰ to - 7.89‰), locally replaced the primary gypsum crystals., This research was funded by Project CGL2009-11096.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Fracturing and Cementation in the Miocene Vilobí Gypsum Unit (Penedès Half-Graben, Ne Spain).

  • Martínez Rodríguez, Cristina
  • Baqués, Vinyet
  • Playà, E.
  • Moragas, Mar
  • Travé, A.
28th IAS meeting of Sedimentology, 5-8/7 2011 ,Zaragoza, Spain, The Vilobí Gypsum Unit (upper Burdigalian) is located in the Penedès half-graben (northeast of the Iberian Peninsula). This unit consists of a succession up to 60 m of primary (limited to the top interval) and secondary (the predominant form) gypsum with both laminated and banded facies. This succession was formed in a gypsiferous coastal salina that periodically underwent emersion episodes. During these episodes, early diagenetic anhydrite (both nodular-banded facies and enterolithic levels interbedded within the gypsum) formed in a sabkha setting. This succession has been affected by both ductile (folds and microfolds) and brittle (faults and joints) deformations. Structures of ductile deformation are interpreted to have been caused by syn-sedimentary deformation, whereas those of brittle deformation are related to Neogene extensional stages recorded in the region. Brittle structures are partly or totally cemented by fibrous and/or crystalline (tabular, megacrystalline) gypsum. A number of families of fragile structures have been distinguished: -Family 1 are NE-SW trending extensional faults infilled with fibrous gypsum growing perpendiculary or sigmoidally to fracture plane (growing syn-tectonically), tabular crystalline cement and megacrystalline gypsum (totally infilling the dissolution-enlarged fault planes). -Family 2 are ENE-WSW trending normal faults with the same infillings as Family 1. -Family 3 are NE-SW to ENE-WSW trending thrust faults with fibrous gypsum cement. -Family 4 are sub-parallel joints located on the upper block (hanging wall) of the local faults. These joints are totally cemented by crystalline cement; exfoliation planes of the crystals are perpendicular to joint aperture. -Family 5 and Family 6 correspond to joints forming an orthogonal system; typically the planes are dissolved and enlarged and the cements of these structures are different from those associated with Family 4, with bigger crystals (megacrystals up to 25 cm). The gypsum rocks of the Vilobí Unit display isotope compositions between +17.8 and +22.3¿ for sulphur, and from +12.4 to +18.6¿ for oxygen, while the cements are heavier, from +21.8 to +25.1¿ and from +14.3 to +19.2 for sulphur and oxygen, respectively. Additionally, isotope signals of the infillings show an increasing trend from the youngest cements (fibrous gypsum) to the latest ones (megacrystals). These data suggest chemical recycling processes of the previous sulphates, both the host-gypsum rocks and the youngest cements. The conjugate extensional faults (Family 1 and 2) were formed during the latest stages of the major rifting episode (lower to middle Langhian). Family 4 is attributed to an early post-rift event (middle to upper Langhian), while Family 3 is related to the upper Langhian-lower Serravallian minor compressive stage (with reactivation of the pre-existing extensive faults and deformation and reorientation of the initial fibrous cement). Family 5 and 6 were formed during a late post-rift event (probably upper Serravallian-Messinian)., Financial support by I+D+I research projects CGL2010-18260, CGL2009-11096 and Grup Consolidat deRecerca “Geologia Sedimentària” (2009 SGR-1458).